GIC: Allow specifying interrupt properties

The GIC driver initialization currently allows an array of interrupts to
be configured as secure. Future use cases would require more interrupt
configuration other than just security, such as priority.

This patch introduces a new interrupt property array as part of both
GICv2 and GICv3 driver data. The platform can populate the array with
interrupt numbers and respective properties. The corresponding driver
initialization iterates through the array, and applies interrupt
configuration as required.

This capability, and the current way of supplying array (or arrays, in
case of GICv3) of secure interrupts, are however mutually exclusive.
Henceforth, the platform should supply either:

  - A list of interrupts to be mapped as secure (the current way).
    Platforms that do this will continue working as they were. With this
    patch, this scheme is deprecated.

  - A list of interrupt properties (properties include interrupt group).
    Individual interrupt properties are specified via. descriptors of
    type 'interrupt_prop_desc_t', which can be populated with the macro
    INTR_PROP_DESC().

A run time assert checks that the platform doesn't specify both.

Henceforth the old scheme of providing list of secure interrupts is
deprecated. When built with ERROR_DEPRECATED=1, GIC drivers will require
that the interrupt properties are supplied instead of an array of secure
interrupts.

Add a section to firmware design about configuring secure interrupts.

Fixes ARM-software/tf-issues#262

Change-Id: I8eec29e72eb69dbb6bce77879febf32c95376942
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
diff --git a/drivers/arm/gic/v2/gicv2_helpers.c b/drivers/arm/gic/v2/gicv2_helpers.c
index 2693076..0df50fb 100644
--- a/drivers/arm/gic/v2/gicv2_helpers.c
+++ b/drivers/arm/gic/v2/gicv2_helpers.c
@@ -9,6 +9,7 @@
 #include <assert.h>
 #include <debug.h>
 #include <gic_common.h>
+#include <interrupt_props.h>
 #include "../common/gic_common_private.h"
 #include "gicv2_private.h"
 
@@ -112,6 +113,7 @@
 		gicd_write_icfgr(gicd_base, index, 0);
 }
 
+#if !ERROR_DEPRECATED
 /*******************************************************************************
  * Helper function to configure secure G0 SPIs.
  ******************************************************************************/
@@ -145,8 +147,50 @@
 	}
 
 }
+#endif
 
 /*******************************************************************************
+ * Helper function to configure properties of secure G0 SPIs.
+ ******************************************************************************/
+void gicv2_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	const interrupt_prop_t *prop_desc;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		prop_desc = &interrupt_props[i];
+
+		if (prop_desc->intr_num < MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
+		gicd_clr_igroupr(gicd_base, prop_desc->intr_num);
+
+		/* Set the priority of this interrupt */
+		gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_pri);
+
+		/* Target the secure interrupts to primary CPU */
+		gicd_set_itargetsr(gicd_base, prop_desc->intr_num,
+				gicv2_get_cpuif_id(gicd_base));
+
+		/* Set interrupt configuration */
+		gicd_set_icfgr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_cfg);
+
+		/* Enable this interrupt */
+		gicd_set_isenabler(gicd_base, prop_desc->intr_num);
+	}
+}
+
+#if !ERROR_DEPRECATED
+/*******************************************************************************
  * Helper function to configure secure G0 SGIs and PPIs.
  ******************************************************************************/
 void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
@@ -193,3 +237,66 @@
 	/* Enable the Group 0 SGIs and PPIs */
 	gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
 }
+#endif
+
+/*******************************************************************************
+ * Helper function to configure properties of secure G0 SGIs and PPIs.
+ ******************************************************************************/
+void gicv2_secure_ppi_sgi_setup_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	uint32_t sec_ppi_sgi_mask = 0;
+	const interrupt_prop_t *prop_desc;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props_num != 0 ? (uintptr_t) interrupt_props : 1);
+
+	/*
+	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
+	 * more scalable approach as it avoids clearing the enable bits in the
+	 * GICD_CTLR.
+	 */
+	gicd_write_icenabler(gicd_base, 0, ~0);
+
+	/* Setup the default PPI/SGI priorities doing four at a time */
+	for (i = 0; i < MIN_SPI_ID; i += 4)
+		gicd_write_ipriorityr(gicd_base, i, GICD_IPRIORITYR_DEF_VAL);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		prop_desc = &interrupt_props[i];
+
+		if (prop_desc->intr_num >= MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		assert(prop_desc->intr_grp == GICV2_INTR_GROUP0);
+
+		/*
+		 * Set interrupt configuration for PPIs. Configuration for SGIs
+		 * are ignored.
+		 */
+		if ((prop_desc->intr_num >= MIN_PPI_ID) &&
+				(prop_desc->intr_num < MIN_SPI_ID)) {
+			gicd_set_icfgr(gicd_base, prop_desc->intr_num,
+					prop_desc->intr_cfg);
+		}
+
+		/* We have an SGI or a PPI. They are Group0 at reset */
+		sec_ppi_sgi_mask |= (1u << prop_desc->intr_num);
+
+		/* Set the priority of this interrupt */
+		gicd_set_ipriorityr(gicd_base, prop_desc->intr_num,
+				prop_desc->intr_pri);
+	}
+
+	/*
+	 * Invert the bitmask to create a mask for non-secure PPIs and SGIs.
+	 * Program the GICD_IGROUPR0 with this bit mask.
+	 */
+	gicd_write_igroupr(gicd_base, 0, ~sec_ppi_sgi_mask);
+
+	/* Enable the Group 0 SGIs and PPIs */
+	gicd_write_isenabler(gicd_base, 0, sec_ppi_sgi_mask);
+}
diff --git a/drivers/arm/gic/v2/gicv2_main.c b/drivers/arm/gic/v2/gicv2_main.c
index 59b6632..25296a6 100644
--- a/drivers/arm/gic/v2/gicv2_main.c
+++ b/drivers/arm/gic/v2/gicv2_main.c
@@ -10,6 +10,7 @@
 #include <debug.h>
 #include <gic_common.h>
 #include <gicv2.h>
+#include <interrupt_props.h>
 #include <spinlock.h>
 #include "../common/gic_common_private.h"
 #include "gicv2_private.h"
@@ -73,11 +74,21 @@
 {
 	assert(driver_data);
 	assert(driver_data->gicd_base);
-	assert(driver_data->g0_interrupt_array);
 
-	gicv2_secure_ppi_sgi_setup(driver_data->gicd_base,
-					driver_data->g0_interrupt_num,
-					driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (driver_data->interrupt_props != NULL) {
+#endif
+		gicv2_secure_ppi_sgi_setup_props(driver_data->gicd_base,
+				driver_data->interrupt_props,
+				driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(driver_data->g0_interrupt_array);
+		gicv2_secure_ppi_sgi_setup(driver_data->gicd_base,
+				driver_data->g0_interrupt_num,
+				driver_data->g0_interrupt_array);
+	}
+#endif
 }
 
 /*******************************************************************************
@@ -91,7 +102,6 @@
 
 	assert(driver_data);
 	assert(driver_data->gicd_base);
-	assert(driver_data->g0_interrupt_array);
 
 	/* Disable the distributor before going further */
 	ctlr = gicd_read_ctlr(driver_data->gicd_base);
@@ -101,10 +111,22 @@
 	/* Set the default attribute of all SPIs */
 	gicv2_spis_configure_defaults(driver_data->gicd_base);
 
-	/* Configure the G0 SPIs */
-	gicv2_secure_spis_configure(driver_data->gicd_base,
-					driver_data->g0_interrupt_num,
-					driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (driver_data->interrupt_props != NULL) {
+#endif
+		gicv2_secure_spis_configure_props(driver_data->gicd_base,
+				driver_data->interrupt_props,
+				driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(driver_data->g0_interrupt_array);
+
+		/* Configure the G0 SPIs */
+		gicv2_secure_spis_configure(driver_data->gicd_base,
+				driver_data->g0_interrupt_num,
+				driver_data->g0_interrupt_array);
+	}
+#endif
 
 	/* Re-enable the secure SPIs now that they have been configured */
 	gicd_write_ctlr(driver_data->gicd_base, ctlr | CTLR_ENABLE_G0_BIT);
@@ -120,19 +142,26 @@
 	assert(plat_driver_data->gicd_base);
 	assert(plat_driver_data->gicc_base);
 
-	/*
-	 * The platform should provide a list of atleast one type of
-	 * interrupts
-	 */
-	assert(plat_driver_data->g0_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (plat_driver_data->interrupt_props == NULL) {
+		/* Interrupt properties array size must be 0 */
+		assert(plat_driver_data->interrupt_props_num == 0);
 
-	/*
-	 * If there are no interrupts of a particular type, then the number of
-	 * interrupts of that type should be 0 and vice-versa.
-	 */
-	assert(plat_driver_data->g0_interrupt_array ?
-	       plat_driver_data->g0_interrupt_num :
-	       plat_driver_data->g0_interrupt_num == 0);
+		/* The platform should provide a list of secure interrupts */
+		assert(plat_driver_data->g0_interrupt_array);
+
+		/*
+		 * If there are no interrupts of a particular type, then the
+		 * number of interrupts of that type should be 0 and vice-versa.
+		 */
+		assert(plat_driver_data->g0_interrupt_array ?
+				plat_driver_data->g0_interrupt_num :
+				plat_driver_data->g0_interrupt_num == 0);
+	}
+#else
+	assert(plat_driver_data->interrupt_props != NULL);
+	assert(plat_driver_data->interrupt_props_num > 0);
+#endif
 
 	/* Ensure that this is a GICv2 system */
 	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
diff --git a/drivers/arm/gic/v2/gicv2_private.h b/drivers/arm/gic/v2/gicv2_private.h
index 70f0597..25600de 100644
--- a/drivers/arm/gic/v2/gicv2_private.h
+++ b/drivers/arm/gic/v2/gicv2_private.h
@@ -15,12 +15,20 @@
  * Private function prototypes
  ******************************************************************************/
 void gicv2_spis_configure_defaults(uintptr_t gicd_base);
+#if !ERROR_DEPRECATED
 void gicv2_secure_spis_configure(uintptr_t gicd_base,
 				     unsigned int num_ints,
 				     const unsigned int *sec_intr_list);
 void gicv2_secure_ppi_sgi_setup(uintptr_t gicd_base,
 					unsigned int num_ints,
 					const unsigned int *sec_intr_list);
+#endif
+void gicv2_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
+void gicv2_secure_ppi_sgi_setup_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
 unsigned int gicv2_get_cpuif_id(uintptr_t base);
 
 /*******************************************************************************
diff --git a/drivers/arm/gic/v3/gicv3_helpers.c b/drivers/arm/gic/v3/gicv3_helpers.c
index 33dbe2c..2522695 100644
--- a/drivers/arm/gic/v3/gicv3_helpers.c
+++ b/drivers/arm/gic/v3/gicv3_helpers.c
@@ -9,6 +9,7 @@
 #include <assert.h>
 #include <debug.h>
 #include <gic_common.h>
+#include <interrupt_props.h>
 #include "../common/gic_common_private.h"
 #include "gicv3_private.h"
 
@@ -364,6 +365,7 @@
 		gicd_write_icfgr(gicd_base, index, 0);
 }
 
+#if !ERROR_DEPRECATED
 /*******************************************************************************
  * Helper function to configure secure G0 and G1S SPIs.
  ******************************************************************************/
@@ -410,8 +412,65 @@
 	}
 
 }
+#endif
 
 /*******************************************************************************
+ * Helper function to configure properties of secure SPIs
+ ******************************************************************************/
+unsigned int gicv3_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	const interrupt_prop_t *current_prop;
+	unsigned long long gic_affinity_val;
+	unsigned int ctlr_enable = 0;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props != NULL);
+	assert(interrupt_props_num > 0);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		current_prop = &interrupt_props[i];
+
+		if (current_prop->intr_num < MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		gicd_clr_igroupr(gicd_base, current_prop->intr_num);
+
+		/* Configure this interrupt as G0 or a G1S interrupt */
+		assert((current_prop->intr_grp == INTR_GROUP0) ||
+				(current_prop->intr_grp == INTR_GROUP1S));
+		if (current_prop->intr_grp == INTR_GROUP1S) {
+			gicd_set_igrpmodr(gicd_base, current_prop->intr_num);
+			ctlr_enable |= CTLR_ENABLE_G1S_BIT;
+		} else {
+			gicd_clr_igrpmodr(gicd_base, current_prop->intr_num);
+			ctlr_enable |= CTLR_ENABLE_G0_BIT;
+		}
+
+		/* Set interrupt configuration */
+		gicd_set_icfgr(gicd_base, current_prop->intr_num,
+				current_prop->intr_cfg);
+
+		/* Set the priority of this interrupt */
+		gicd_set_ipriorityr(gicd_base, current_prop->intr_num,
+				current_prop->intr_pri);
+
+		/* Target SPIs to the primary CPU */
+		gic_affinity_val = gicd_irouter_val_from_mpidr(read_mpidr(), 0);
+		gicd_write_irouter(gicd_base, current_prop->intr_num,
+				gic_affinity_val);
+
+		/* Enable this interrupt */
+		gicd_set_isenabler(gicd_base, current_prop->intr_num);
+	}
+
+	return ctlr_enable;
+}
+
+/*******************************************************************************
  * Helper function to configure the default attributes of SPIs.
  ******************************************************************************/
 void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base)
@@ -439,6 +498,7 @@
 	gicr_write_icfgr1(gicr_base, 0);
 }
 
+#if !ERROR_DEPRECATED
 /*******************************************************************************
  * Helper function to configure secure G0 and G1S SPIs.
  ******************************************************************************/
@@ -476,3 +536,54 @@
 		}
 	}
 }
+#endif
+
+/*******************************************************************************
+ * Helper function to configure properties of secure G0 and G1S PPIs and SGIs.
+ ******************************************************************************/
+void gicv3_secure_ppi_sgi_configure_props(uintptr_t gicr_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num)
+{
+	unsigned int i;
+	const interrupt_prop_t *current_prop;
+
+	/* Make sure there's a valid property array */
+	assert(interrupt_props != NULL);
+	assert(interrupt_props_num > 0);
+
+	for (i = 0; i < interrupt_props_num; i++) {
+		current_prop = &interrupt_props[i];
+
+		if (current_prop->intr_num >= MIN_SPI_ID)
+			continue;
+
+		/* Configure this interrupt as a secure interrupt */
+		gicr_clr_igroupr0(gicr_base, current_prop->intr_num);
+
+		/* Configure this interrupt as G0 or a G1S interrupt */
+		assert((current_prop->intr_grp == INTR_GROUP0) ||
+				(current_prop->intr_grp == INTR_GROUP1S));
+		if (current_prop->intr_grp == INTR_GROUP1S)
+			gicr_set_igrpmodr0(gicr_base, current_prop->intr_num);
+		else
+			gicr_clr_igrpmodr0(gicr_base, current_prop->intr_num);
+
+		/* Set the priority of this interrupt */
+		gicr_set_ipriorityr(gicr_base, current_prop->intr_num,
+				current_prop->intr_pri);
+
+		/*
+		 * Set interrupt configuration for PPIs. Configuration for SGIs
+		 * are ignored.
+		 */
+		if ((current_prop->intr_num >= MIN_PPI_ID) &&
+				(current_prop->intr_num < MIN_SPI_ID)) {
+			gicr_set_icfgr1(gicr_base, current_prop->intr_num,
+					current_prop->intr_cfg);
+		}
+
+		/* Enable this interrupt */
+		gicr_set_isenabler0(gicr_base, current_prop->intr_num);
+	}
+}
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
index 0f50f6d..8c4f508 100644
--- a/drivers/arm/gic/v3/gicv3_main.c
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -9,6 +9,7 @@
 #include <assert.h>
 #include <debug.h>
 #include <gicv3.h>
+#include <interrupt_props.h>
 #include <spinlock.h>
 #include "gicv3_private.h"
 
@@ -66,23 +67,33 @@
 
 	assert(IS_IN_EL3());
 
-	/*
-	 * The platform should provide a list of at least one type of
-	 * interrupts
-	 */
-	assert(plat_driver_data->g0_interrupt_array ||
-	       plat_driver_data->g1s_interrupt_array);
+#if !ERROR_DEPRECATED
+	if (plat_driver_data->interrupt_props == NULL) {
+		/* Interrupt properties array size must be 0 */
+		assert(plat_driver_data->interrupt_props_num == 0);
 
-	/*
-	 * If there are no interrupts of a particular type, then the number of
-	 * interrupts of that type should be 0 and vice-versa.
-	 */
-	assert(plat_driver_data->g0_interrupt_array ?
-	       plat_driver_data->g0_interrupt_num :
-	       plat_driver_data->g0_interrupt_num == 0);
-	assert(plat_driver_data->g1s_interrupt_array ?
-	       plat_driver_data->g1s_interrupt_num :
-	       plat_driver_data->g1s_interrupt_num == 0);
+		/*
+		 * The platform should provide a list of at least one type of
+		 * interrupt.
+		 */
+		assert(plat_driver_data->g0_interrupt_array ||
+				plat_driver_data->g1s_interrupt_array);
+
+		/*
+		 * If there are no interrupts of a particular type, then the
+		 * number of interrupts of that type should be 0 and vice-versa.
+		 */
+		assert(plat_driver_data->g0_interrupt_array ?
+				plat_driver_data->g0_interrupt_num :
+				plat_driver_data->g0_interrupt_num == 0);
+		assert(plat_driver_data->g1s_interrupt_array ?
+				plat_driver_data->g1s_interrupt_num :
+				plat_driver_data->g1s_interrupt_num == 0);
+	}
+#else
+	assert(plat_driver_data->interrupt_props != NULL);
+	assert(plat_driver_data->interrupt_props_num > 0);
+#endif
 
 	/* Check for system register support */
 #ifdef AARCH32
@@ -148,8 +159,6 @@
 
 	assert(gicv3_driver_data);
 	assert(gicv3_driver_data->gicd_base);
-	assert(gicv3_driver_data->g1s_interrupt_array ||
-	       gicv3_driver_data->g0_interrupt_array);
 
 	assert(IS_IN_EL3());
 
@@ -171,23 +180,37 @@
 	/* Set the default attribute of all SPIs */
 	gicv3_spis_configure_defaults(gicv3_driver_data->gicd_base);
 
-	/* Configure the G1S SPIs */
-	if (gicv3_driver_data->g1s_interrupt_array) {
-		gicv3_secure_spis_configure(gicv3_driver_data->gicd_base,
+#if !ERROR_DEPRECATED
+	if (gicv3_driver_data->interrupt_props != NULL) {
+#endif
+		bitmap = gicv3_secure_spis_configure_props(
+				gicv3_driver_data->gicd_base,
+				gicv3_driver_data->interrupt_props,
+				gicv3_driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(gicv3_driver_data->g1s_interrupt_array ||
+				gicv3_driver_data->g0_interrupt_array);
+
+		/* Configure the G1S SPIs */
+		if (gicv3_driver_data->g1s_interrupt_array) {
+			gicv3_secure_spis_configure(gicv3_driver_data->gicd_base,
 					gicv3_driver_data->g1s_interrupt_num,
 					gicv3_driver_data->g1s_interrupt_array,
 					INTR_GROUP1S);
-		bitmap |= CTLR_ENABLE_G1S_BIT;
-	}
+			bitmap |= CTLR_ENABLE_G1S_BIT;
+		}
 
-	/* Configure the G0 SPIs */
-	if (gicv3_driver_data->g0_interrupt_array) {
-		gicv3_secure_spis_configure(gicv3_driver_data->gicd_base,
+		/* Configure the G0 SPIs */
+		if (gicv3_driver_data->g0_interrupt_array) {
+			gicv3_secure_spis_configure(gicv3_driver_data->gicd_base,
 					gicv3_driver_data->g0_interrupt_num,
 					gicv3_driver_data->g0_interrupt_array,
 					INTR_GROUP0);
-		bitmap |= CTLR_ENABLE_G0_BIT;
+			bitmap |= CTLR_ENABLE_G0_BIT;
+		}
 	}
+#endif
 
 	/* Enable the secure SPIs now that they have been configured */
 	gicd_set_ctlr(gicv3_driver_data->gicd_base, bitmap, RWP_TRUE);
@@ -207,8 +230,6 @@
 	assert(gicv3_driver_data->rdistif_base_addrs);
 	assert(gicv3_driver_data->gicd_base);
 	assert(gicd_read_ctlr(gicv3_driver_data->gicd_base) & CTLR_ARE_S_BIT);
-	assert(gicv3_driver_data->g1s_interrupt_array ||
-	       gicv3_driver_data->g0_interrupt_array);
 
 	assert(IS_IN_EL3());
 
@@ -220,21 +241,34 @@
 	/* Set the default attribute of all SGIs and PPIs */
 	gicv3_ppi_sgi_configure_defaults(gicr_base);
 
-	/* Configure the G1S SGIs/PPIs */
-	if (gicv3_driver_data->g1s_interrupt_array) {
-		gicv3_secure_ppi_sgi_configure(gicr_base,
+#if !ERROR_DEPRECATED
+	if (gicv3_driver_data->interrupt_props != NULL) {
+#endif
+		gicv3_secure_ppi_sgi_configure_props(gicr_base,
+				gicv3_driver_data->interrupt_props,
+				gicv3_driver_data->interrupt_props_num);
+#if !ERROR_DEPRECATED
+	} else {
+		assert(gicv3_driver_data->g1s_interrupt_array ||
+		       gicv3_driver_data->g0_interrupt_array);
+
+		/* Configure the G1S SGIs/PPIs */
+		if (gicv3_driver_data->g1s_interrupt_array) {
+			gicv3_secure_ppi_sgi_configure(gicr_base,
 					gicv3_driver_data->g1s_interrupt_num,
 					gicv3_driver_data->g1s_interrupt_array,
 					INTR_GROUP1S);
-	}
+		}
 
-	/* Configure the G0 SGIs/PPIs */
-	if (gicv3_driver_data->g0_interrupt_array) {
-		gicv3_secure_ppi_sgi_configure(gicr_base,
+		/* Configure the G0 SGIs/PPIs */
+		if (gicv3_driver_data->g0_interrupt_array) {
+			gicv3_secure_ppi_sgi_configure(gicr_base,
 					gicv3_driver_data->g0_interrupt_num,
 					gicv3_driver_data->g0_interrupt_array,
 					INTR_GROUP0);
+		}
 	}
+#endif
 }
 
 /*******************************************************************************
diff --git a/drivers/arm/gic/v3/gicv3_private.h b/drivers/arm/gic/v3/gicv3_private.h
index 43529c5..a5093d0 100644
--- a/drivers/arm/gic/v3/gicv3_private.h
+++ b/drivers/arm/gic/v3/gicv3_private.h
@@ -85,6 +85,7 @@
  ******************************************************************************/
 void gicv3_spis_configure_defaults(uintptr_t gicd_base);
 void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base);
+#if !ERROR_DEPRECATED
 void gicv3_secure_spis_configure(uintptr_t gicd_base,
 				     unsigned int num_ints,
 				     const unsigned int *sec_intr_list,
@@ -93,6 +94,13 @@
 					unsigned int num_ints,
 					const unsigned int *sec_intr_list,
 					unsigned int int_grp);
+#endif
+void gicv3_secure_ppi_sgi_configure_props(uintptr_t gicr_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
+unsigned int gicv3_secure_spis_configure_props(uintptr_t gicd_base,
+		const interrupt_prop_t *interrupt_props,
+		unsigned int interrupt_props_num);
 void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
 					unsigned int rdistif_num,
 					uintptr_t gicr_base,