Add support for SCMI AP core configuration protocol v1.0
Change-Id: If07000b6b19011e960336a305a784dd643301b97
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
diff --git a/plat/arm/css/common/css_common.mk b/plat/arm/css/common/css_common.mk
index 72d5527..29dd01d 100644
--- a/plat/arm/css/common/css_common.mk
+++ b/plat/arm/css/common/css_common.mk
@@ -32,6 +32,7 @@
plat/arm/css/drivers/scpi/css_scpi.c
else
BL31_SOURCES += plat/arm/css/drivers/scp/css_pm_scmi.c \
+ plat/arm/css/drivers/scmi/scmi_ap_core_proto.c \
plat/arm/css/drivers/scmi/scmi_common.c \
plat/arm/css/drivers/scmi/scmi_pwr_dmn_proto.c \
plat/arm/css/drivers/scmi/scmi_sys_pwr_proto.c \
diff --git a/plat/arm/css/drivers/scmi/scmi.h b/plat/arm/css/drivers/scmi/scmi.h
index cf9ef5e..723fd06 100644
--- a/plat/arm/css/drivers/scmi/scmi.h
+++ b/plat/arm/css/drivers/scmi/scmi.h
@@ -12,6 +12,7 @@
#include <stdint.h>
/* Supported SCMI Protocol Versions */
+#define SCMI_AP_CORE_PROTO_VER MAKE_SCMI_VERSION(1, 0)
#define SCMI_PWR_DMN_PROTO_VER MAKE_SCMI_VERSION(1, 0)
#define SCMI_SYS_PWR_PROTO_VER MAKE_SCMI_VERSION(1, 0)
@@ -29,6 +30,8 @@
/* SCMI Protocol identifiers */
#define SCMI_PWR_DMN_PROTO_ID 0x11
#define SCMI_SYS_PWR_PROTO_ID 0x12
+/* The AP core protocol is a CSS platform-specific extension */
+#define SCMI_AP_CORE_PROTO_ID 0x90
/* Mandatory messages IDs for all SCMI protocols */
#define SCMI_PROTO_VERSION_MSG 0x0
@@ -43,6 +46,10 @@
#define SCMI_SYS_PWR_STATE_SET_MSG 0x3
#define SCMI_SYS_PWR_STATE_GET_MSG 0x4
+/* SCMI AP core protocol message IDs */
+#define SCMI_AP_CORE_RESET_ADDR_SET_MSG 0x3
+#define SCMI_AP_CORE_RESET_ADDR_GET_MSG 0x4
+
/* Helper macros for system power management protocol commands */
/*
@@ -73,6 +80,13 @@
#define SCMI_SYS_PWR_POWER_UP 0x3
#define SCMI_SYS_PWR_SUSPEND 0x4
+/*
+ * Macros to describe the bit-fields of the `attribute` of AP core protocol
+ * AP_CORE_RESET_ADDR set/get messages.
+ */
+#define SCMI_AP_CORE_LOCK_ATTR_SHIFT 0x0
+#define SCMI_AP_CORE_LOCK_ATTR (1U << SCMI_AP_CORE_LOCK_ATTR_SHIFT)
+
/* SCMI Error code definitions */
#define SCMI_E_QUEUED 1
#define SCMI_E_SUCCESS 0
@@ -133,4 +147,8 @@
int scmi_sys_pwr_state_set(void *p, uint32_t flags, uint32_t system_state);
int scmi_sys_pwr_state_get(void *p, uint32_t *system_state);
+/* SCMI AP core configuration protocol commands. */
+int scmi_ap_core_set_reset_addr(void *p, uint64_t reset_addr, uint32_t attr);
+int scmi_ap_core_get_reset_addr(void *p, uint64_t *reset_addr, uint32_t *attr);
+
#endif /* __CSS_SCMI_H__ */
diff --git a/plat/arm/css/drivers/scmi/scmi_ap_core_proto.c b/plat/arm/css/drivers/scmi/scmi_ap_core_proto.c
new file mode 100644
index 0000000..1438cba
--- /dev/null
+++ b/plat/arm/css/drivers/scmi/scmi_ap_core_proto.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include "scmi.h"
+#include "scmi_private.h"
+
+/*
+ * API to set the SCMI AP core reset address and attributes
+ */
+int scmi_ap_core_set_reset_addr(void *p, uint64_t reset_addr, uint32_t attr)
+{
+ mailbox_mem_t *mbx_mem;
+ int token = 0, ret;
+ scmi_channel_t *ch = (scmi_channel_t *)p;
+
+ validate_scmi_channel(ch);
+
+ scmi_get_channel(ch);
+
+ mbx_mem = (mailbox_mem_t *)(ch->info->scmi_mbx_mem);
+ mbx_mem->msg_header = SCMI_MSG_CREATE(SCMI_AP_CORE_PROTO_ID,
+ SCMI_AP_CORE_RESET_ADDR_SET_MSG, token);
+ mbx_mem->len = SCMI_AP_CORE_RESET_ADDR_SET_MSG_LEN;
+ mbx_mem->flags = SCMI_FLAG_RESP_POLL;
+ SCMI_PAYLOAD_ARG3(mbx_mem->payload, reset_addr & 0xffffffff,
+ reset_addr >> 32, attr);
+
+ scmi_send_sync_command(ch);
+
+ /* Get the return values */
+ SCMI_PAYLOAD_RET_VAL1(mbx_mem->payload, ret);
+ assert(mbx_mem->len == SCMI_AP_CORE_RESET_ADDR_SET_RESP_LEN);
+ assert(token == SCMI_MSG_GET_TOKEN(mbx_mem->msg_header));
+
+ scmi_put_channel(ch);
+
+ return ret;
+}
+
+/*
+ * API to get the SCMI AP core reset address and attributes
+ */
+int scmi_ap_core_get_reset_addr(void *p, uint64_t *reset_addr, uint32_t *attr)
+{
+ mailbox_mem_t *mbx_mem;
+ int token = 0, ret;
+ scmi_channel_t *ch = (scmi_channel_t *)p;
+ uint32_t lo_addr, hi_addr;
+
+ validate_scmi_channel(ch);
+
+ scmi_get_channel(ch);
+
+ mbx_mem = (mailbox_mem_t *)(ch->info->scmi_mbx_mem);
+ mbx_mem->msg_header = SCMI_MSG_CREATE(SCMI_AP_CORE_PROTO_ID,
+ SCMI_AP_CORE_RESET_ADDR_GET_MSG, token);
+ mbx_mem->len = SCMI_AP_CORE_RESET_ADDR_GET_MSG_LEN;
+ mbx_mem->flags = SCMI_FLAG_RESP_POLL;
+
+ scmi_send_sync_command(ch);
+
+ /* Get the return values */
+ SCMI_PAYLOAD_RET_VAL4(mbx_mem->payload, ret, lo_addr, hi_addr, *attr);
+ *reset_addr = lo_addr | (uint64_t)hi_addr << 32;
+ assert(mbx_mem->len == SCMI_AP_CORE_RESET_ADDR_GET_RESP_LEN);
+ assert(token == SCMI_MSG_GET_TOKEN(mbx_mem->msg_header));
+
+ scmi_put_channel(ch);
+
+ return ret;
+}
diff --git a/plat/arm/css/drivers/scmi/scmi_private.h b/plat/arm/css/drivers/scmi/scmi_private.h
index 67fe748..39bc8cc 100644
--- a/plat/arm/css/drivers/scmi/scmi_private.h
+++ b/plat/arm/css/drivers/scmi/scmi_private.h
@@ -18,6 +18,12 @@
#define SCMI_PROTO_MSG_ATTR_MSG_LEN 8
#define SCMI_PROTO_MSG_ATTR_RESP_LEN 12
+#define SCMI_AP_CORE_RESET_ADDR_SET_MSG_LEN 16
+#define SCMI_AP_CORE_RESET_ADDR_SET_RESP_LEN 8
+
+#define SCMI_AP_CORE_RESET_ADDR_GET_MSG_LEN 4
+#define SCMI_AP_CORE_RESET_ADDR_GET_RESP_LEN 20
+
#define SCMI_PWR_STATE_SET_MSG_LEN 16
#define SCMI_PWR_STATE_SET_RESP_LEN 8
@@ -113,6 +119,11 @@
(val3) = mmio_read_32((uintptr_t)&payld_arr[2]); \
} while (0)
+#define SCMI_PAYLOAD_RET_VAL4(payld_arr, val1, val2, val3, val4) do { \
+ SCMI_PAYLOAD_RET_VAL3(payld_arr, val1, val2, val3); \
+ (val4) = mmio_read_32((uintptr_t)&payld_arr[3]); \
+ } while (0)
+
/*
* Private data structure for representing the mailbox memory layout. Refer
* the SCMI specification for more details.