plat/arm: scpi: Move to drivers/ folder
Change-Id: Icc59cdaf2b56f6936e9847f1894594c671db2e94
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/plat/arm/css/drivers/scp/css_bom_bootloader.c b/plat/arm/css/drivers/scp/css_bom_bootloader.c
index 5fe268d..40880da 100644
--- a/plat/arm/css/drivers/scp/css_bom_bootloader.c
+++ b/plat/arm/css/drivers/scp/css_bom_bootloader.c
@@ -10,10 +10,10 @@
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/arm/css/css_mhu.h>
+#include <drivers/arm/css/css_scpi.h>
#include <plat/common/platform.h>
#include <platform_def.h>
-#include "../scpi/css_scpi.h"
#include "css_scp.h"
/* ID of the MHU slot used for the BOM protocol */
diff --git a/plat/arm/css/drivers/scp/css_pm_scpi.c b/plat/arm/css/drivers/scp/css_pm_scpi.c
index 04c5f9b..7e22816 100644
--- a/plat/arm/css/drivers/scp/css_pm_scpi.c
+++ b/plat/arm/css/drivers/scp/css_pm_scpi.c
@@ -8,10 +8,10 @@
#include <arch_helpers.h>
#include <common/debug.h>
+#include <drivers/arm/css/css_scpi.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/arm/css/common/css_pm.h>
-#include "../scpi/css_scpi.h"
#include "css_scp.h"
/*
diff --git a/plat/arm/css/drivers/scpi/css_scpi.c b/plat/arm/css/drivers/scpi/css_scpi.c
deleted file mode 100644
index 4965c66..0000000
--- a/plat/arm/css/drivers/scpi/css_scpi.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-#include <string.h>
-
-#include <arch_helpers.h>
-#include <common/debug.h>
-#include <drivers/arm/css/css_mhu.h>
-#include <lib/utils.h>
-#include <plat/common/platform.h>
-#include <platform_def.h>
-
-#include "css_scpi.h"
-
-#define SCPI_SHARED_MEM_SCP_TO_AP PLAT_CSS_SCP_COM_SHARED_MEM_BASE
-#define SCPI_SHARED_MEM_AP_TO_SCP (PLAT_CSS_SCP_COM_SHARED_MEM_BASE \
- + 0x100)
-
-/* Header and payload addresses for commands from AP to SCP */
-#define SCPI_CMD_HEADER_AP_TO_SCP \
- ((scpi_cmd_t *) SCPI_SHARED_MEM_AP_TO_SCP)
-#define SCPI_CMD_PAYLOAD_AP_TO_SCP \
- ((void *) (SCPI_SHARED_MEM_AP_TO_SCP + sizeof(scpi_cmd_t)))
-
-/* Header and payload addresses for responses from SCP to AP */
-#define SCPI_RES_HEADER_SCP_TO_AP \
- ((scpi_cmd_t *) SCPI_SHARED_MEM_SCP_TO_AP)
-#define SCPI_RES_PAYLOAD_SCP_TO_AP \
- ((void *) (SCPI_SHARED_MEM_SCP_TO_AP + sizeof(scpi_cmd_t)))
-
-/* ID of the MHU slot used for the SCPI protocol */
-#define SCPI_MHU_SLOT_ID 0
-
-static void scpi_secure_message_start(void)
-{
- mhu_secure_message_start(SCPI_MHU_SLOT_ID);
-}
-
-static void scpi_secure_message_send(size_t payload_size)
-{
- /*
- * Ensure that any write to the SCPI payload area is seen by SCP before
- * we write to the MHU register. If these 2 writes were reordered by
- * the CPU then SCP would read stale payload data
- */
- dmbst();
-
- mhu_secure_message_send(SCPI_MHU_SLOT_ID);
-}
-
-static void scpi_secure_message_receive(scpi_cmd_t *cmd)
-{
- uint32_t mhu_status;
-
- assert(cmd != NULL);
-
- mhu_status = mhu_secure_message_wait();
-
- /* Expect an SCPI message, reject any other protocol */
- if (mhu_status != (1 << SCPI_MHU_SLOT_ID)) {
- ERROR("MHU: Unexpected protocol (MHU status: 0x%x)\n",
- mhu_status);
- panic();
- }
-
- /*
- * Ensure that any read to the SCPI payload area is done after reading
- * the MHU register. If these 2 reads were reordered then the CPU would
- * read invalid payload data
- */
- dmbld();
-
- memcpy(cmd, (void *) SCPI_SHARED_MEM_SCP_TO_AP, sizeof(*cmd));
-}
-
-static void scpi_secure_message_end(void)
-{
- mhu_secure_message_end(SCPI_MHU_SLOT_ID);
-}
-
-int scpi_wait_ready(void)
-{
- scpi_cmd_t scpi_cmd;
-
- VERBOSE("Waiting for SCP_READY command...\n");
-
- /* Get a message from the SCP */
- scpi_secure_message_start();
- scpi_secure_message_receive(&scpi_cmd);
- scpi_secure_message_end();
-
- /* We are expecting 'SCP Ready', produce correct error if it's not */
- scpi_status_t status = SCP_OK;
- if (scpi_cmd.id != SCPI_CMD_SCP_READY) {
- ERROR("Unexpected SCP command: expected command #%u, got command #%u\n",
- SCPI_CMD_SCP_READY, scpi_cmd.id);
- status = SCP_E_SUPPORT;
- } else if (scpi_cmd.size != 0) {
- ERROR("SCP_READY command has incorrect size: expected 0, got %u\n",
- scpi_cmd.size);
- status = SCP_E_SIZE;
- }
-
- VERBOSE("Sending response for SCP_READY command\n");
-
- /*
- * Send our response back to SCP.
- * We are using the same SCPI header, just update the status field.
- */
- scpi_cmd.status = status;
- scpi_secure_message_start();
- memcpy((void *) SCPI_SHARED_MEM_AP_TO_SCP, &scpi_cmd, sizeof(scpi_cmd));
- scpi_secure_message_send(0);
- scpi_secure_message_end();
-
- return status == SCP_OK ? 0 : -1;
-}
-
-void scpi_set_css_power_state(unsigned int mpidr,
- scpi_power_state_t cpu_state, scpi_power_state_t cluster_state,
- scpi_power_state_t css_state)
-{
- scpi_cmd_t *cmd;
- uint32_t state = 0;
- uint32_t *payload_addr;
-
-#if ARM_PLAT_MT
- /*
- * The current SCPI driver only caters for single-threaded platforms.
- * Hence we ignore the thread ID (which is always 0) for such platforms.
- */
- state |= (mpidr >> MPIDR_AFF1_SHIFT) & 0x0f; /* CPU ID */
- state |= ((mpidr >> MPIDR_AFF2_SHIFT) & 0x0f) << 4; /* Cluster ID */
-#else
- state |= mpidr & 0x0f; /* CPU ID */
- state |= (mpidr & 0xf00) >> 4; /* Cluster ID */
-#endif /* ARM_PLAT_MT */
-
- state |= cpu_state << 8;
- state |= cluster_state << 12;
- state |= css_state << 16;
-
- scpi_secure_message_start();
-
- /* Populate the command header */
- cmd = SCPI_CMD_HEADER_AP_TO_SCP;
- cmd->id = SCPI_CMD_SET_CSS_POWER_STATE;
- cmd->set = SCPI_SET_NORMAL;
- cmd->sender = 0;
- cmd->size = sizeof(state);
- /* Populate the command payload */
- payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
- *payload_addr = state;
- scpi_secure_message_send(sizeof(state));
- /*
- * SCP does not reply to this command in order to avoid MHU interrupts
- * from the sender, which could interfere with its power state request.
- */
-
- scpi_secure_message_end();
-}
-
-/*
- * Query and obtain CSS power state from SCP.
- *
- * In response to the query, SCP returns power states of all CPUs in all
- * clusters of the system. The returned response is then filtered based on the
- * supplied MPIDR. Power states of requested cluster and CPUs within are updated
- * via. supplied non-NULL pointer arguments.
- *
- * Returns 0 on success, or -1 on errors.
- */
-int scpi_get_css_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
- unsigned int *cluster_state_p)
-{
- scpi_cmd_t *cmd;
- scpi_cmd_t response;
- int power_state, cpu, cluster, rc = -1;
-
- /*
- * Extract CPU and cluster membership of the given MPIDR. SCPI caters
- * for only up to 0xf clusters, and 8 CPUs per cluster
- */
-#if ARM_PLAT_MT
- /*
- * The current SCPI driver only caters for single-threaded platforms.
- * Hence we ignore the thread ID (which is always 0) for such platforms.
- */
- cpu = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
- cluster = (mpidr >> MPIDR_AFF2_SHIFT) & MPIDR_AFFLVL_MASK;
-#else
- cpu = mpidr & MPIDR_AFFLVL_MASK;
- cluster = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
-#endif /* ARM_PLAT_MT */
- if (cpu >= 8 || cluster >= 0xf)
- return -1;
-
- scpi_secure_message_start();
-
- /* Populate request headers */
- zeromem(SCPI_CMD_HEADER_AP_TO_SCP, sizeof(*cmd));
- cmd = SCPI_CMD_HEADER_AP_TO_SCP;
- cmd->id = SCPI_CMD_GET_CSS_POWER_STATE;
-
- /*
- * Send message and wait for SCP's response
- */
- scpi_secure_message_send(0);
- scpi_secure_message_receive(&response);
-
- if (response.status != SCP_OK)
- goto exit;
-
- /* Validate SCP response */
- if (!CHECK_RESPONSE(response, cluster))
- goto exit;
-
- /* Extract power states for required cluster */
- power_state = *(((uint16_t *) SCPI_RES_PAYLOAD_SCP_TO_AP) + cluster);
- if (CLUSTER_ID(power_state) != cluster)
- goto exit;
-
- /* Update power state via. pointers */
- if (cluster_state_p)
- *cluster_state_p = CLUSTER_POWER_STATE(power_state);
- if (cpu_state_p)
- *cpu_state_p = CPU_POWER_STATE(power_state);
- rc = 0;
-
-exit:
- scpi_secure_message_end();
- return rc;
-}
-
-uint32_t scpi_sys_power_state(scpi_system_state_t system_state)
-{
- scpi_cmd_t *cmd;
- uint8_t *payload_addr;
- scpi_cmd_t response;
-
- scpi_secure_message_start();
-
- /* Populate the command header */
- cmd = SCPI_CMD_HEADER_AP_TO_SCP;
- cmd->id = SCPI_CMD_SYS_POWER_STATE;
- cmd->set = 0;
- cmd->sender = 0;
- cmd->size = sizeof(*payload_addr);
- /* Populate the command payload */
- payload_addr = SCPI_CMD_PAYLOAD_AP_TO_SCP;
- *payload_addr = system_state & 0xff;
- scpi_secure_message_send(sizeof(*payload_addr));
-
- scpi_secure_message_receive(&response);
-
- scpi_secure_message_end();
-
- return response.status;
-}
diff --git a/plat/arm/css/drivers/scpi/css_scpi.h b/plat/arm/css/drivers/scpi/css_scpi.h
deleted file mode 100644
index 68fc60a..0000000
--- a/plat/arm/css/drivers/scpi/css_scpi.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef CSS_SCPI_H
-#define CSS_SCPI_H
-
-#include <stddef.h>
-#include <stdint.h>
-
-/*
- * An SCPI command consists of a header and a payload.
- * The following structure describes the header. It is 64-bit long.
- */
-typedef struct {
- /* Command ID */
- uint32_t id : 7;
- /* Set ID. Identifies whether this is a standard or extended command. */
- uint32_t set : 1;
- /* Sender ID to match a reply. The value is sender specific. */
- uint32_t sender : 8;
- /* Size of the payload in bytes (0 - 511) */
- uint32_t size : 9;
- uint32_t reserved : 7;
- /*
- * Status indicating the success of a command.
- * See the enum below.
- */
- uint32_t status;
-} scpi_cmd_t;
-
-typedef enum {
- SCPI_SET_NORMAL = 0, /* Normal SCPI commands */
- SCPI_SET_EXTENDED /* Extended SCPI commands */
-} scpi_set_t;
-
-enum {
- SCP_OK = 0, /* Success */
- SCP_E_PARAM, /* Invalid parameter(s) */
- SCP_E_ALIGN, /* Invalid alignment */
- SCP_E_SIZE, /* Invalid size */
- SCP_E_HANDLER, /* Invalid handler or callback */
- SCP_E_ACCESS, /* Invalid access or permission denied */
- SCP_E_RANGE, /* Value out of range */
- SCP_E_TIMEOUT, /* Time out has ocurred */
- SCP_E_NOMEM, /* Invalid memory area or pointer */
- SCP_E_PWRSTATE, /* Invalid power state */
- SCP_E_SUPPORT, /* Feature not supported or disabled */
- SCPI_E_DEVICE, /* Device error */
- SCPI_E_BUSY, /* Device is busy */
-};
-
-typedef uint32_t scpi_status_t;
-
-typedef enum {
- SCPI_CMD_SCP_READY = 0x01,
- SCPI_CMD_SET_CSS_POWER_STATE = 0x03,
- SCPI_CMD_GET_CSS_POWER_STATE = 0x04,
- SCPI_CMD_SYS_POWER_STATE = 0x05
-} scpi_command_t;
-
-/*
- * Macros to parse SCP response to GET_CSS_POWER_STATE command
- *
- * [3:0] : cluster ID
- * [7:4] : cluster state: 0 = on; 3 = off; rest are reserved
- * [15:8]: on/off state for individual CPUs in the cluster
- *
- * Payload is in little-endian
- */
-#define CLUSTER_ID(_resp) ((_resp) & 0xf)
-#define CLUSTER_POWER_STATE(_resp) (((_resp) >> 4) & 0xf)
-
-/* Result is a bit mask of CPU on/off states in the cluster */
-#define CPU_POWER_STATE(_resp) (((_resp) >> 8) & 0xff)
-
-/*
- * For GET_CSS_POWER_STATE, SCP returns the power states of every cluster. The
- * size of response depends on the number of clusters in the system. The
- * SCP-to-AP payload contains 2 bytes per cluster. Make sure the response is
- * large enough to contain power states of a given cluster
- */
-#define CHECK_RESPONSE(_resp, _clus) \
- (_resp.size >= (((_clus) + 1) * 2))
-
-typedef enum {
- scpi_power_on = 0,
- scpi_power_retention = 1,
- scpi_power_off = 3,
-} scpi_power_state_t;
-
-typedef enum {
- scpi_system_shutdown = 0,
- scpi_system_reboot = 1,
- scpi_system_reset = 2
-} scpi_system_state_t;
-
-int scpi_wait_ready(void);
-void scpi_set_css_power_state(unsigned int mpidr,
- scpi_power_state_t cpu_state,
- scpi_power_state_t cluster_state,
- scpi_power_state_t css_state);
-int scpi_get_css_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
- unsigned int *cluster_state_p);
-uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
-
-#endif /* CSS_SCPI_H */