refactor(plat/nxp/lx216x): clean up platform configure file
Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
diff --git a/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk b/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
index fbdcd83..49dd095 100644
--- a/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
+++ b/plat/nxp/soc-lx2160a/lx2162aqds/platform.mk
@@ -25,7 +25,7 @@
ERRATA_DDR_A050450 := 1
- # On-Board Flash Details
+# On-Board Flash Details
FLASH_TYPE := MT35XU512A
XSPI_FLASH_SZ := 0x10000000
NXP_XSPI_NOR_UNIT_SIZE := 0x20000
@@ -34,59 +34,15 @@
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
- # Platform specific features.
+# Platform specific features.
WARM_BOOT := yes
- # Adding platform specific defines
-
-$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
-
-ifeq (${POVDD_ENABLE},yes)
-$(eval $(call add_define,CONFIG_POVDD_ENABLE))
-endif
-
-ifneq (${FLASH_TYPE},)
-$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
-endif
-
-ifneq (${XSPI_FLASH_SZ},)
-$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
-endif
-
-ifneq (${FSPI_ERASE_4K},)
-$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
-endif
-
-ifneq (${NUM_OF_DDRC},)
-$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
-endif
-
-ifneq (${DDRC_NUM_DIMM},)
-$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
-endif
-
-ifneq (${DDRC_NUM_CS},)
-$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
-endif
-
-ifeq (${DDR_ADDR_DEC},yes)
-$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
-endif
-
-ifeq (${DDR_ECC_EN},yes)
-$(eval $(call add_define,CONFIG_DDR_ECC_EN))
-endif
-
-# Platform can control the base address for non-volatile storage.
-#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
-
-ifeq (${WARM_BOOT},yes)
-$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
-endif
-
- # Adding Platform files build files
+# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
- # Adding SoC build info
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk