diff --git a/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk b/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
index 5b95222..4dd4665 100644
--- a/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
+++ b/plat/nxp/soc-lx2160a/lx2160aqds/platform.mk
@@ -33,59 +33,15 @@
 # config is enabled for future use cases.
 FSPI_ERASE_4K	:= 0
 
- # Platform specific features.
+# Platform specific features.
 WARM_BOOT	:=	yes
 
- # Adding platform specific defines
-
-$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
-
-ifeq (${POVDD_ENABLE},yes)
-$(eval $(call add_define,CONFIG_POVDD_ENABLE))
-endif
-
-ifneq (${FLASH_TYPE},)
-$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
-endif
-
-ifneq (${XSPI_FLASH_SZ},)
-$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
-endif
-
-ifneq (${FSPI_ERASE_4K},)
-$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
-endif
-
-ifneq (${NUM_OF_DDRC},)
-$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
-endif
-
-ifneq (${DDRC_NUM_DIMM},)
-$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
-endif
-
-ifneq (${DDRC_NUM_CS},)
-$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
-endif
-
-ifeq (${DDR_ADDR_DEC},yes)
-$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
-endif
-
-ifeq (${DDR_ECC_EN},yes)
-$(eval $(call add_define,CONFIG_DDR_ECC_EN))
-endif
-
-# Platform can control the base address for non-volatile storage.
-#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
-
-ifeq (${WARM_BOOT},yes)
-$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
-endif
-
- # Adding Platform files build files
+# Adding Platform files build files
 BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c\
 			${BOARD_PATH}/platform.c
 
- # Adding SoC build info
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
 include plat/nxp/soc-lx2160a/soc.mk