feat: adding the diphda platform
This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.
Diphda uses a FIP image located in the flash. The FIP contains the
following components:
- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates
The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.
Then, the application processor is released from reset and starts by
executing BL2.
BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d
diff --git a/plat/arm/board/diphda/platform.mk b/plat/arm/board/diphda/platform.mk
new file mode 100644
index 0000000..62d7184
--- /dev/null
+++ b/plat/arm/board/diphda/platform.mk
@@ -0,0 +1,68 @@
+#
+# Copyright (c) 2021, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Making sure the diphda platform type is specified
+ifeq ($(filter ${TARGET_PLATFORM}, fpga fvp),)
+ $(error TARGET_PLATFORM must be fpga or fvp)
+endif
+
+DIPHDA_CPU_LIBS +=lib/cpus/aarch64/cortex_a35.S
+
+PLAT_INCLUDES := -Iplat/arm/board/diphda/common/include \
+ -Iplat/arm/board/diphda/include \
+ -Iinclude/plat/arm/common \
+ -Iinclude/plat/arm/css/common/aarch64
+
+override NEED_BL1 := no
+
+override NEED_BL2 := yes
+FIP_BL2_ARGS := tb-fw
+
+override NEED_BL2U := no
+override NEED_BL31 := yes
+NEED_BL32 := yes
+override NEED_BL33 := yes
+
+# Include GICv2 driver files
+include drivers/arm/gic/v2/gicv2.mk
+
+DIPHDA_GIC_SOURCES := ${GICV2_SOURCES} \
+ plat/common/plat_gicv2.c \
+ plat/arm/common/arm_gicv2.c
+
+
+BL2_SOURCES += plat/arm/board/diphda/common/diphda_security.c \
+ plat/arm/board/diphda/common/diphda_err.c \
+ plat/arm/board/diphda/common/diphda_trusted_boot.c \
+ lib/utils/mem_region.c \
+ plat/arm/board/diphda/common/diphda_helpers.S \
+ plat/arm/board/diphda/common/diphda_plat.c \
+ plat/arm/board/diphda/common/diphda_bl2_mem_params_desc.c \
+ ${DIPHDA_CPU_LIBS} \
+
+
+BL31_SOURCES += drivers/cfi/v2m/v2m_flash.c \
+ lib/utils/mem_region.c \
+ plat/arm/board/diphda/common/diphda_helpers.S \
+ plat/arm/board/diphda/common/diphda_topology.c \
+ plat/arm/board/diphda/common/diphda_security.c \
+ plat/arm/board/diphda/common/diphda_plat.c \
+ plat/arm/board/diphda/common/diphda_pm.c \
+ ${DIPHDA_CPU_LIBS} \
+ ${DIPHDA_GIC_SOURCES}
+
+
+FDT_SOURCES += plat/arm/board/diphda/common/fdts/diphda_spmc_manifest.dts
+DIPHDA_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/diphda_spmc_manifest.dtb
+
+# Add the SPMC manifest to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${DIPHDA_TOS_FW_CONFIG},--tos-fw-config,${DIPHDA_TOS_FW_CONFIG}))
+
+# Adding TARGET_PLATFORM as a GCC define (-D option)
+$(eval $(call add_define,TARGET_PLATFORM_$(call uppercase,${TARGET_PLATFORM})))
+
+include plat/arm/common/arm_common.mk
+include plat/arm/board/common/board_common.mk