Merge "intel: agilex: Fix memory controller driver" into integration
diff --git a/bl31/aarch64/crash_reporting.S b/bl31/aarch64/crash_reporting.S
index 4050678..2c41029 100644
--- a/bl31/aarch64/crash_reporting.S
+++ b/bl31/aarch64/crash_reporting.S
@@ -28,7 +28,7 @@
*/
.section .rodata.crash_prints, "aS"
print_spacer:
- .asciz " =\t\t0x"
+ .asciz " = 0x"
gp_regs:
.asciz "x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",\
@@ -55,11 +55,11 @@
#endif /* CTX_INCLUDE_AARCH32_REGS */
panic_msg:
- .asciz "PANIC in EL3 at x30 = 0x"
+ .asciz "PANIC in EL3.\nx30"
excpt_msg:
- .asciz "Unhandled Exception in EL3.\nx30 =\t\t0x"
+ .asciz "Unhandled Exception in EL3.\nx30"
intr_excpt_msg:
- .asciz "Unhandled Interrupt Exception in EL3.\nx30 =\t\t0x"
+ .asciz "Unhandled Interrupt Exception in EL3.\nx30"
/*
* Helper function to print newline to console.
@@ -94,10 +94,11 @@
mov x4, x6
/* asm_print_str updates x4 to point to next entry in list */
bl asm_print_str
+ /* x0 = number of symbols printed + 1 */
+ sub x0, x4, x6
/* update x6 with the updated list pointer */
mov x6, x4
- adr x4, print_spacer
- bl asm_print_str
+ bl print_alignment
ldr x4, [x7], #REGSZ
bl asm_print_hex
bl print_newline
@@ -107,6 +108,20 @@
ret
endfunc size_controlled_print
+ /* -----------------------------------------------------
+ * This function calculates and prints required number
+ * of space characters followed by "= 0x", based on the
+ * length of ascii register name.
+ * x0: length of ascii register name + 1
+ * ------------------------------------------------------
+ */
+func print_alignment
+ /* The minimum ascii length is 3, e.g. for "x0" */
+ adr x4, print_spacer - 3
+ add x4, x4, x0
+ b asm_print_str
+endfunc print_alignment
+
/*
* Helper function to store x8 - x15 registers to
* the crash buf. The system registers values are
@@ -189,7 +204,7 @@
* -----------------------------------------------------
*/
func el3_panic
- msr spsel, #1
+ msr spsel, #MODE_SP_ELX
prepare_crash_buf_save_x0_x1
adr x0, panic_msg
mov sp, x0
@@ -230,6 +245,9 @@
/* Print the crash message. sp points to the crash message */
mov x4, sp
bl asm_print_str
+ /* Print spaces to align "x30" string */
+ mov x0, #4
+ bl print_alignment
/* load the crash buf address */
mrs x0, tpidr_el3
/* report x30 first from the crash buf */
diff --git a/common/aarch64/debug.S b/common/aarch64/debug.S
index da740ef..ac47cbe 100644
--- a/common/aarch64/debug.S
+++ b/common/aarch64/debug.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,6 +10,7 @@
.globl asm_print_str
.globl asm_print_hex
+ .globl asm_print_hex_bits
.globl asm_assert
.globl do_panic
@@ -107,8 +108,11 @@
* Clobber: x30, x0 - x3, x5
*/
func asm_print_hex
- mov x3, x30
mov x5, #64 /* No of bits to convert to ascii */
+
+ /* Convert to ascii number of bits in x5 */
+asm_print_hex_bits:
+ mov x3, x30
1:
sub x5, x5, #4
lsrv x0, x4, x5
diff --git a/include/plat/arm/common/aarch64/arm_macros.S b/include/plat/arm/common/aarch64/arm_macros.S
index 0bd0daf..d47e4e0 100644
--- a/include/plat/arm/common/aarch64/arm_macros.S
+++ b/include/plat/arm/common/aarch64/arm_macros.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -22,11 +22,13 @@
/* Registers common to both GICv2 and GICv3 */
gicd_pend_reg:
- .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
+ .asciz "gicd_ispendr regs (Offsets 0x200-0x278)\nOffset\t\t\tValue\n"
newline:
.asciz "\n"
spacer:
- .asciz ":\t\t0x"
+ .asciz ":\t\t 0x"
+prefix:
+ .asciz "0x"
/* ---------------------------------------------
* The below utility macro prints out relevant GIC
@@ -77,7 +79,15 @@
sub x4, x7, x16
cmp x4, #0x280
b.eq exit_print_gic_regs
- bl asm_print_hex
+
+ /* Print "0x" */
+ adr x4, prefix
+ bl asm_print_str
+
+ /* Print offset */
+ sub x4, x7, x16
+ mov x5, #12
+ bl asm_print_hex_bits
adr x4, spacer
bl asm_print_str
diff --git a/lib/aarch32/arm32_aeabi_divmod.c b/lib/aarch32/arm32_aeabi_divmod.c
index 0b36cb6..ea8e2bb 100644
--- a/lib/aarch32/arm32_aeabi_divmod.c
+++ b/lib/aarch32/arm32_aeabi_divmod.c
@@ -33,13 +33,11 @@
unsigned int __aeabi_uidivmod(unsigned int numerator, unsigned int denominator);
unsigned int __aeabi_uidiv(unsigned int numerator, unsigned int denominator);
-unsigned int __aeabi_uimod(unsigned int numerator, unsigned int denominator);
/* returns in R0 and R1 by tail calling an asm function */
signed int __aeabi_idivmod(signed int numerator, signed int denominator);
signed int __aeabi_idiv(signed int numerator, signed int denominator);
-signed int __aeabi_imod(signed int numerator, signed int denominator);
/*
* __ste_idivmod_ret_t __aeabi_idivmod(signed numerator, signed denominator)
@@ -106,15 +104,6 @@
return qr.q;
}
-unsigned int __aeabi_uimod(unsigned int numerator, unsigned int denominator)
-{
- struct qr qr = { .q_n = 0, .r_n = 0 };
-
- uint_div_qr(numerator, denominator, &qr);
-
- return qr.r;
-}
-
unsigned int __aeabi_uidivmod(unsigned int numerator, unsigned int denominator)
{
struct qr qr = { .q_n = 0, .r_n = 0 };
@@ -145,42 +134,6 @@
return qr.q;
}
-signed int __aeabi_imod(signed int numerator, signed int denominator)
-{
- signed int s;
- signed int i;
- signed int j;
- signed int h;
- struct qr qr = { .q_n = 0, .r_n = 0 };
-
- /* in case modulo of a power of 2 */
- for (i = 0, j = 0, h = 0, s = denominator; (s != 0) || (h > 1); i++) {
- if (s & 1) {
- j = i;
- h++;
- }
- s = s >> 1;
- }
- if (h == 1)
- return numerator >> j;
-
- if (((numerator < 0) && (denominator > 0)) ||
- ((numerator > 0) && (denominator < 0)))
- qr.q_n = 1; /* quotient shall be negate */
-
- if (numerator < 0) {
- numerator = -numerator;
- qr.r_n = 1; /* remainder shall be negate */
- }
-
- if (denominator < 0)
- denominator = -denominator;
-
- uint_div_qr(numerator, denominator, &qr);
-
- return qr.r;
-}
-
signed int __aeabi_idivmod(signed int numerator, signed int denominator)
{
struct qr qr = { .q_n = 0, .r_n = 0 };
diff --git a/lib/extensions/ras/ras_common.c b/lib/extensions/ras/ras_common.c
index be8bece..64a4852 100644
--- a/lib/extensions/ras/ras_common.c
+++ b/lib/extensions/ras/ras_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -83,7 +83,8 @@
{
struct ras_interrupt *ras_inrs = ras_interrupt_mappings.intrs;
struct ras_interrupt *selected = NULL;
- int start, end, mid, probe_data, ret __unused;
+ int probe_data = 0;
+ int start, end, mid, ret __unused;
const struct err_handler_data err_data = {
.version = ERR_HANDLER_VERSION,
diff --git a/lib/xlat_tables/aarch32/nonlpae_tables.c b/lib/xlat_tables/aarch32/nonlpae_tables.c
index e31f9d8..bd6b152 100644
--- a/lib/xlat_tables/aarch32/nonlpae_tables.c
+++ b/lib/xlat_tables/aarch32/nonlpae_tables.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2016-2017, Linaro Limited. All rights reserved.
- * Copyright (c) 2014-2017, Arm Limited. All rights reserved.
+ * Copyright (c) 2014-2019, Arm Limited. All rights reserved.
* Copyright (c) 2014, STMicroelectronics International N.V.
* All rights reserved.
*
@@ -445,7 +445,8 @@
} else {
xlat_table = (unsigned long)mmu_l2_base +
next_xlat * MMU32B_L2_TABLE_SIZE;
- assert(++next_xlat <= MAX_XLAT_TABLES);
+ next_xlat++;
+ assert(next_xlat <= MAX_XLAT_TABLES);
memset((char *)xlat_table, 0,
MMU32B_L2_TABLE_SIZE);
diff --git a/plat/intel/soc/agilex/bl2_plat_setup.c b/plat/intel/soc/agilex/bl2_plat_setup.c
index 385065f..e9ab928 100644
--- a/plat/intel/soc/agilex/bl2_plat_setup.c
+++ b/plat/intel/soc/agilex/bl2_plat_setup.c
@@ -69,9 +69,9 @@
deassert_peripheral_reset();
config_hps_hs_before_warm_reset();
- watchdog_init(get_wdt_clk(&reverse_handoff_ptr));
+ watchdog_init(get_wdt_clk());
- console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
+ console_16550_register(PLAT_UART0_BASE, get_uart_clk(), PLAT_BAUDRATE,
&console);
socfpga_delay_timer_init();
@@ -105,7 +105,7 @@
enable_mmu_el3(0);
- dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000);
+ dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000, get_mmc_clk());
info.mmc_dev_type = MMC_IS_SD;
info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3;
diff --git a/plat/intel/soc/agilex/include/agilex_clock_manager.h b/plat/intel/soc/agilex/include/agilex_clock_manager.h
index c1a7546..73e6c4e 100644
--- a/plat/intel/soc/agilex/include/agilex_clock_manager.h
+++ b/plat/intel/soc/agilex/include/agilex_clock_manager.h
@@ -80,41 +80,38 @@
#define CLKMGR_STAT_PERPLLLOCKED(x) (((x) & 0x00010000) >> 16)
#define CLKMGR_INTRCLR_MAINLOCKLOST_SET_MSK 0x00000004
#define CLKMGR_INTRCLR_PERLOCKLOST_SET_MSK 0x00000008
+#define CLKMGR_INTOSC_HZ 460000000
/* Main PLL Macros */
#define CLKMGR_MAINPLL_EN_RESET 0x000000ff
-#define CLKMGR_MAINPLL_PLLM_MDIV(x) ((x) & 0x000003ff)
-#define CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK 0x00000001
-#define CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK 0x00000002
-
-#define CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(x) (((x) & 0x00003f00) >> 8)
-#define CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(x) (((x) & 0x00000f00) >> 8)
-#define CLKMGR_MAINPLL_PLLGLOB_DREFCLKDIV(x) (((x) & 0x00003000) >> 12)
-
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC(x) (((x) & 0x00030000) >> 16)
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1 0x0
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC 0x1
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S 0x2
-#define CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000003ff)
-#define CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(x) (((x) << 16) & 0x00ff0000)
/* Peripheral PLL Macros */
#define CLKMGR_PERPLL_EN_RESET 0x00000fff
-#define CLKMGR_PERPLL_PLLM_MDIV(x) ((x) & 0x000003ff)
#define CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET(x) (((x) << 0) & 0x0000ffff)
-#define CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK 0x00000001
-
-#define CLKMGR_PERPLL_PLLGLOB_REFCLKDIV(x) (((x) & 0x00003f00) >> 8)
-#define CLKMGR_PERPLL_PLLGLOB_AREFCLKDIV(x) (((x) & 0x00000f00) >> 8)
-#define CLKMGR_PERPLL_PLLGLOB_DREFCLKDIV(x) (((x) & 0x00003000) >> 12)
-
-#define CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK 0x00000002
-#define CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000003ff)
-#define CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(x) (((x) << 16) & 0x00ff0000)
/* Altera Macros */
#define CLKMGR_ALTERA_EXTCNTRST_RESET 0xff
+/* Shared Macros */
+#define CLKMGR_PSRC(x) (((x) & 0x00030000) >> 16)
+#define CLKMGR_PSRC_MAIN 0
+#define CLKMGR_PSRC_PER 1
+
+#define CLKMGR_PLLGLOB_PSRC_EOSC1 0x0
+#define CLKMGR_PLLGLOB_PSRC_INTOSC 0x1
+#define CLKMGR_PLLGLOB_PSRC_F2S 0x2
+
+#define CLKMGR_PLLM_MDIV(x) ((x) & 0x000003ff)
+#define CLKMGR_PLLGLOB_PD_SET_MSK 0x00000001
+#define CLKMGR_PLLGLOB_RST_SET_MSK 0x00000002
+
+#define CLKMGR_PLLGLOB_REFCLKDIV(x) (((x) & 0x00003f00) >> 8)
+#define CLKMGR_PLLGLOB_AREFCLKDIV(x) (((x) & 0x00000f00) >> 8)
+#define CLKMGR_PLLGLOB_DREFCLKDIV(x) (((x) & 0x00003000) >> 12)
+
+#define CLKMGR_VCOCALIB_HSCNT_SET(x) (((x) << 0) & 0x000003ff)
+#define CLKMGR_VCOCALIB_MSCNT_SET(x) (((x) << 16) & 0x00ff0000)
+
typedef struct {
uint32_t clk_freq_of_eosc1;
@@ -123,6 +120,8 @@
} CLOCK_SOURCE_CONFIG;
void config_clkmgr_handoff(handoff *hoff_ptr);
-int get_wdt_clk(handoff *hoff_ptr);
+uint32_t get_wdt_clk(void);
+uint32_t get_uart_clk(void);
+uint32_t get_mmc_clk(void);
#endif
diff --git a/plat/intel/soc/agilex/include/agilex_private.h b/plat/intel/soc/agilex/include/agilex_private.h
index 5ccbc8c..fc0e9fd 100644
--- a/plat/intel/soc/agilex/include/agilex_private.h
+++ b/plat/intel/soc/agilex/include/agilex_private.h
@@ -11,14 +11,13 @@
#define AGX_MMC_REG_BASE 0xff808000
#define EMMC_DESC_SIZE (1<<20)
-#define EMMC_INIT_PARAMS(base) \
+#define EMMC_INIT_PARAMS(base, clk) \
{ .bus_width = MMC_BUS_WIDTH_4, \
- .clk_rate = 50000000, \
+ .clk_rate = (clk), \
.desc_base = (base), \
.desc_size = EMMC_DESC_SIZE, \
.flags = 0, \
- .reg_base = AGX_MMC_REG_BASE, \
- \
+ .reg_base = AGX_MMC_REG_BASE \
}
typedef enum {
@@ -26,7 +25,7 @@
BOOT_SOURCE_SDMMC,
BOOT_SOURCE_NAND,
BOOT_SOURCE_RSVD,
- BOOT_SOURCE_QSPI,
+ BOOT_SOURCE_QSPI
} boot_source_type;
void enable_nonsecure_access(void);
diff --git a/plat/intel/soc/agilex/include/agilex_system_manager.h b/plat/intel/soc/agilex/include/agilex_system_manager.h
index 6ec2084..381c2d3 100644
--- a/plat/intel/soc/agilex/include/agilex_system_manager.h
+++ b/plat/intel/soc/agilex/include/agilex_system_manager.h
@@ -65,6 +65,11 @@
#define AGX_CCU_NOC_CPU0_RAMSPACE0_0 0xf7004688
#define AGX_CCU_NOC_IOM_RAMSPACE0_0 0xf7018628
+#define AGX_SYSMGR_CORE(x) (0xffd12000 + (x))
+#define SYSMGR_BOOT_SCRATCH_COLD_0 0x200
+#define SYSMGR_BOOT_SCRATCH_COLD_1 0x204
+#define SYSMGR_BOOT_SCRATCH_COLD_2 0x208
+
#define DISABLE_BRIDGE_FIREWALL 0x0ffe0101
#define DISABLE_L4_FIREWALL (BIT(0) | BIT(16) | BIT(24))
diff --git a/plat/intel/soc/agilex/soc/agilex_clock_manager.c b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
index 6e7b43e..218676a 100644
--- a/plat/intel/soc/agilex/soc/agilex_clock_manager.c
+++ b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
@@ -12,15 +12,8 @@
#include "agilex_clock_manager.h"
#include "agilex_handoff.h"
+#include "agilex_system_manager.h"
-static const CLOCK_SOURCE_CONFIG clk_source = {
- /* clk_freq_of_eosc1 */
- (uint32_t) 25000000,
- /* clk_freq_of_f2h_free */
- (uint32_t) 400000000,
- /* clk_freq_of_cb_intosc_ls */
- (uint32_t) 50000000,
-};
uint32_t wait_pll_lock(void)
{
@@ -114,18 +107,18 @@
/* Put both PLL in reset and power down */
mmio_clrbits_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB,
- CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK |
- CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK);
+ CLKMGR_PLLGLOB_PD_SET_MSK |
+ CLKMGR_PLLGLOB_RST_SET_MSK);
mmio_clrbits_32(CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB,
- CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK |
- CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK);
+ CLKMGR_PLLGLOB_PD_SET_MSK |
+ CLKMGR_PLLGLOB_RST_SET_MSK);
/* Setup main PLL dividers */
- mdiv = CLKMGR_MAINPLL_PLLM_MDIV(hoff_ptr->main_pll_pllm);
+ mdiv = CLKMGR_PLLM_MDIV(hoff_ptr->main_pll_pllm);
- arefclk_div = CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(
+ arefclk_div = CLKMGR_PLLGLOB_AREFCLKDIV(
hoff_ptr->main_pll_pllglob);
- drefclk_div = CLKMGR_MAINPLL_PLLGLOB_DREFCLKDIV(
+ drefclk_div = CLKMGR_PLLGLOB_DREFCLKDIV(
hoff_ptr->main_pll_pllglob);
mscnt = 100 / (mdiv / BIT(drefclk_div));
@@ -134,8 +127,8 @@
hscnt = (mdiv * mscnt * BIT(drefclk_div) / arefclk_div) - 4;
mmio_write_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_VCOCALIB,
- CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(hscnt) |
- CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(mscnt));
+ CLKMGR_VCOCALIB_HSCNT_SET(hscnt) |
+ CLKMGR_VCOCALIB_MSCNT_SET(mscnt));
mmio_write_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_NOCDIV,
hoff_ptr->main_pll_nocdiv);
@@ -159,11 +152,11 @@
hoff_ptr->main_pll_nocclk);
/* Setup peripheral PLL dividers */
- mdiv = CLKMGR_PERPLL_PLLM_MDIV(hoff_ptr->per_pll_pllm);
+ mdiv = CLKMGR_PLLM_MDIV(hoff_ptr->per_pll_pllm);
- arefclk_div = CLKMGR_PERPLL_PLLGLOB_AREFCLKDIV(
+ arefclk_div = CLKMGR_PLLGLOB_AREFCLKDIV(
hoff_ptr->per_pll_pllglob);
- drefclk_div = CLKMGR_PERPLL_PLLGLOB_DREFCLKDIV(
+ drefclk_div = CLKMGR_PLLGLOB_DREFCLKDIV(
hoff_ptr->per_pll_pllglob);
mscnt = 100 / (mdiv / BIT(drefclk_div));
@@ -172,8 +165,8 @@
hscnt = (mdiv * mscnt * BIT(drefclk_div) / arefclk_div) - 4;
mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_VCOCALIB,
- CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(hscnt) |
- CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(mscnt));
+ CLKMGR_VCOCALIB_HSCNT_SET(hscnt) |
+ CLKMGR_VCOCALIB_MSCNT_SET(mscnt));
mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_EMACCTL,
hoff_ptr->per_pll_emacctl);
@@ -197,11 +190,11 @@
/* Take both PLL out of reset and power up */
mmio_setbits_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB,
- CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK |
- CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK);
+ CLKMGR_PLLGLOB_PD_SET_MSK |
+ CLKMGR_PLLGLOB_RST_SET_MSK);
mmio_setbits_32(CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB,
- CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK |
- CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK);
+ CLKMGR_PLLGLOB_PD_SET_MSK |
+ CLKMGR_PLLGLOB_RST_SET_MSK);
wait_pll_lock();
@@ -256,38 +249,123 @@
CLKMGR_MAINPLL_EN_RESET);
mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_EN,
CLKMGR_PERPLL_EN_RESET);
+
+ /* Pass clock source frequency into scratch register */
+ mmio_write_32(AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1),
+ hoff_ptr->hps_osc_clk_h);
+ mmio_write_32(AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2),
+ hoff_ptr->fpga_clk_hz);
}
-int get_wdt_clk(handoff *hoff_ptr)
+/* Extract reference clock from platform clock source */
+uint32_t get_ref_clk(uint32_t pllglob)
{
- int main_noc_base_clk, l3_main_free_clk, l4_sys_free_clk;
- int data32, mdiv, arefclkdiv, ref_clk;
+ uint32_t arefclkdiv, ref_clk;
+ uint32_t scr_reg;
- data32 = mmio_read_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB);
-
- switch (CLKMGR_MAINPLL_PLLGLOB_PSRC(data32)) {
- case CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1:
- ref_clk = clk_source.clk_freq_of_eosc1;
+ switch (CLKMGR_PSRC(pllglob)) {
+ case CLKMGR_PLLGLOB_PSRC_EOSC1:
+ scr_reg = AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1);
+ ref_clk = mmio_read_32(scr_reg);
break;
- case CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC:
- ref_clk = clk_source.clk_freq_of_cb_intosc_ls;
+ case CLKMGR_PLLGLOB_PSRC_INTOSC:
+ ref_clk = CLKMGR_INTOSC_HZ;
break;
- case CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S:
- ref_clk = clk_source.clk_freq_of_f2h_free;
+ case CLKMGR_PLLGLOB_PSRC_F2S:
+ scr_reg = AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2);
+ ref_clk = mmio_read_32(scr_reg);
break;
default:
ref_clk = 0;
assert(0);
break;
+ }
+
+ arefclkdiv = CLKMGR_PLLGLOB_AREFCLKDIV(pllglob);
+ ref_clk /= arefclkdiv;
+
+ return ref_clk;
+}
+
+/* Calculate clock frequency based on parameter */
+uint32_t get_clk_freq(uint32_t psrc_reg, uint32_t main_pllc, uint32_t per_pllc)
+{
+ uint32_t clk_psrc, mdiv, ref_clk;
+ uint32_t pllm_reg, pllc_reg, pllc_div, pllglob_reg;
+
+ clk_psrc = mmio_read_32(CLKMGR_MAINPLL + psrc_reg);
+
+ switch (CLKMGR_PSRC(clk_psrc)) {
+ case CLKMGR_PSRC_MAIN:
+ pllm_reg = CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLM;
+ pllc_reg = CLKMGR_MAINPLL + main_pllc;
+ pllglob_reg = CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB;
+ break;
+ case CLKMGR_PSRC_PER:
+ pllm_reg = CLKMGR_PERPLL + CLKMGR_PERPLL_PLLM;
+ pllc_reg = CLKMGR_PERPLL + per_pllc;
+ pllglob_reg = CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB;
+ break;
+ default:
+ return 0;
}
+ ref_clk = get_ref_clk(mmio_read_32(pllglob_reg));
+ mdiv = CLKMGR_PLLM_MDIV(mmio_read_32(pllm_reg));
+ ref_clk *= mdiv;
+
+ pllc_div = mmio_read_32(pllc_reg) & 0x7ff;
+
+ return ref_clk / pllc_div;
+}
+
+/* Return L3 interconnect clock */
+uint32_t get_l3_clk(void)
+{
+ uint32_t l3_clk;
+
+ l3_clk = get_clk_freq(CLKMGR_MAINPLL_NOCCLK, CLKMGR_MAINPLL_PLLC1,
+ CLKMGR_PERPLL_PLLC1);
+ return l3_clk;
+}
+
+/* Calculate clock frequency to be used for watchdog timer */
+uint32_t get_wdt_clk(void)
+{
+ uint32_t l3_clk, l4_sys_clk;
+
+ l3_clk = get_l3_clk();
+ l4_sys_clk = l3_clk / 4;
+
+ return l4_sys_clk;
+}
+
+/* Calculate clock frequency to be used for UART driver */
+uint32_t get_uart_clk(void)
+{
+ uint32_t data32, l3_clk, l4_sp_clk;
+
+ l3_clk = get_l3_clk();
+
+ data32 = mmio_read_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_NOCDIV);
+ data32 = (data32 >> 16) & 0x3;
+
+ l4_sp_clk = l3_clk >> data32;
+
+ return l4_sp_clk;
+}
+
+/* Calculate clock frequency to be used for SDMMC driver */
+uint32_t get_mmc_clk(void)
+{
+ uint32_t data32, mmc_clk;
+
- arefclkdiv = CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(data32);
- mdiv = CLKMGR_MAINPLL_PLLM_MDIV(hoff_ptr->main_pll_pllm);
+ mmc_clk = get_clk_freq(CLKMGR_ALTERA_SDMMCCTR,
+ CLKMGR_MAINPLL_PLLC3, CLKMGR_PERPLL_PLLC3);
- ref_clk = (ref_clk / arefclkdiv) * mdiv;
- main_noc_base_clk = ref_clk / (hoff_ptr->main_pll_pllc1 & 0x7ff);
- l3_main_free_clk = main_noc_base_clk / (hoff_ptr->main_pll_nocclk + 1);
- l4_sys_free_clk = l3_main_free_clk / 4;
+ data32 = mmio_read_32(CLKMGR_ALTERA + CLKMGR_ALTERA_SDMMCCTR);
+ data32 = (data32 & 0x7ff) + 1;
+ mmc_clk = (mmc_clk / data32) / 4;
- return l4_sys_free_clk;
+ return mmc_clk;
}
diff --git a/plat/rockchip/common/bl31_plat_setup.c b/plat/rockchip/common/bl31_plat_setup.c
index a13ee49..c4a0359 100644
--- a/plat/rockchip/common/bl31_plat_setup.c
+++ b/plat/rockchip/common/bl31_plat_setup.c
@@ -14,7 +14,6 @@
#include <drivers/console.h>
#include <drivers/generic_delay_timer.h>
#include <drivers/ti/uart/uart_16550.h>
-#include <lib/coreboot.h>
#include <lib/mmio.h>
#include <plat_private.h>
#include <plat/common/platform.h>
@@ -62,16 +61,10 @@
params_early_setup(arg1);
-#if COREBOOT
- if (coreboot_serial.type)
- console_16550_register(coreboot_serial.baseaddr,
- coreboot_serial.input_hertz,
- coreboot_serial.baud,
- &console);
-#else
- console_16550_register(rockchip_get_uart_base(), PLAT_RK_UART_CLOCK,
- PLAT_RK_UART_BAUDRATE, &console);
-#endif
+ if (rockchip_get_uart_base() != 0)
+ console_16550_register(rockchip_get_uart_base(),
+ rockchip_get_uart_clock(),
+ rockchip_get_uart_baudrate(), &console);
VERBOSE("bl31_setup\n");
diff --git a/plat/rockchip/common/include/plat_private.h b/plat/rockchip/common/include/plat_private.h
index 714a8bf..990d106 100644
--- a/plat/rockchip/common/include/plat_private.h
+++ b/plat/rockchip/common/include/plat_private.h
@@ -139,6 +139,8 @@
extern const mmap_region_t plat_rk_mmap[];
uint32_t rockchip_get_uart_base(void);
+uint32_t rockchip_get_uart_baudrate(void);
+uint32_t rockchip_get_uart_clock(void);
#endif /* __ASSEMBLER__ */
diff --git a/plat/rockchip/common/params_setup.c b/plat/rockchip/common/params_setup.c
index d0fea4f..8c2e5e9 100644
--- a/plat/rockchip/common/params_setup.c
+++ b/plat/rockchip/common/params_setup.c
@@ -26,12 +26,6 @@
static struct bl_aux_gpio_info suspend_gpio[10];
uint32_t suspend_gpio_cnt;
static struct bl_aux_rk_apio_info suspend_apio;
-static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
-
-uint32_t rockchip_get_uart_base(void)
-{
- return rk_uart_base;
-}
#if COREBOOT
static int dt_process_fdt(u_register_t param_from_bl2)
@@ -39,6 +33,9 @@
return -ENODEV;
}
#else
+static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
+static uint32_t rk_uart_baudrate = PLAT_RK_UART_BAUDRATE;
+static uint32_t rk_uart_clock = PLAT_RK_UART_CLOCK;
static uint8_t fdt_buffer[0x10000];
void *plat_get_fdt(void)
@@ -53,9 +50,12 @@
int node_offset;
int stdout_path_len;
const char *stdout_path;
+ const char *separator;
+ const char *baud_start;
char serial_char;
int serial_no;
uint32_t uart_base;
+ uint32_t baud;
node_offset = fdt_path_offset(fdt, path_name);
if (node_offset < 0)
@@ -68,7 +68,7 @@
/*
* We expect something like:
- * "serial0:...""
+ * "serial0:baudrate"
*/
if (strncmp("serial", stdout_path, 6) != 0)
return;
@@ -96,11 +96,38 @@
uart_base = UART4_BASE;
break;
#endif
+#ifdef UART5_BASE
+ case 5:
+ uart_base = UART5_BASE;
+ break;
+#endif
default:
return;
}
rk_uart_base = uart_base;
+
+ separator = strchr(stdout_path, ':');
+ if (!separator)
+ return;
+
+ baud = 0;
+ baud_start = separator + 1;
+ while (*baud_start != '\0') {
+ /*
+ * uart binding is <baud>{<parity>{<bits>{...}}}
+ * So the baudrate either is the whole string, or
+ * we end in the parity characters.
+ */
+ if (*baud_start == 'n' || *baud_start == 'o' ||
+ *baud_start == 'e')
+ break;
+
+ baud = baud * 10 + (*baud_start - '0');
+ baud_start++;
+ }
+
+ rk_uart_baudrate = baud;
}
static int dt_process_fdt(u_register_t param_from_bl2)
@@ -118,6 +145,33 @@
}
#endif
+uint32_t rockchip_get_uart_base(void)
+{
+#if COREBOOT
+ return coreboot_serial.baseaddr;
+#else
+ return rk_uart_base;
+#endif
+}
+
+uint32_t rockchip_get_uart_baudrate(void)
+{
+#if COREBOOT
+ return coreboot_serial.baud;
+#else
+ return rk_uart_baudrate;
+#endif
+}
+
+uint32_t rockchip_get_uart_clock(void)
+{
+#if COREBOOT
+ return coreboot_serial.input_hertz;
+#else
+ return rk_uart_clock;
+#endif
+}
+
struct bl_aux_gpio_info *plat_get_rockchip_gpio_reset(void)
{
return &rst_gpio;
diff --git a/plat/rockchip/common/sp_min_plat_setup.c b/plat/rockchip/common/sp_min_plat_setup.c
index 7b1a0b5..6d15075 100644
--- a/plat/rockchip/common/sp_min_plat_setup.c
+++ b/plat/rockchip/common/sp_min_plat_setup.c
@@ -15,7 +15,6 @@
#include <drivers/console.h>
#include <drivers/generic_delay_timer.h>
#include <drivers/ti/uart/uart_16550.h>
-#include <lib/coreboot.h>
#include <lib/mmio.h>
#include <plat_private.h>
#include <plat/common/platform.h>
@@ -57,16 +56,11 @@
params_early_setup(arg1);
-#if COREBOOT
- if (coreboot_serial.type)
- console_16550_register(coreboot_serial.baseaddr,
- coreboot_serial.input_hertz,
- coreboot_serial.baud,
- &console);
-#else
- console_16550_register(rockchip_get_uart_base(), PLAT_RK_UART_CLOCK,
- PLAT_RK_UART_BAUDRATE, &console);
-#endif
+ if (rockchip_get_uart_base() != 0)
+ console_16550_register(rockchip_get_uart_base(),
+ rockchip_get_uart_clock(),
+ rockchip_get_uart_baudrate(), &console);
+
VERBOSE("sp_min_setup\n");
bl31_params_parse_helper(arg0, NULL, &bl33_ep_info);
diff --git a/plat/rockchip/px30/px30_def.h b/plat/rockchip/px30/px30_def.h
index 021165a..9b8ccfc 100644
--- a/plat/rockchip/px30/px30_def.h
+++ b/plat/rockchip/px30/px30_def.h
@@ -54,6 +54,9 @@
#define UART2_BASE 0xff160000
#define UART2_SIZE SIZE_K(64)
+#define UART5_BASE 0xff178000
+#define UART5_SIZE SIZE_K(64)
+
#define I2C0_BASE 0xff180000
#define I2C0_SIZE SIZE_K(64)
diff --git a/plat/rockchip/rk3399/drivers/pmu/pmu.c b/plat/rockchip/rk3399/drivers/pmu/pmu.c
index a6b5973..30941fd 100644
--- a/plat/rockchip/rk3399/drivers/pmu/pmu.c
+++ b/plat/rockchip/rk3399/drivers/pmu/pmu.c
@@ -1125,32 +1125,41 @@
void suspend_uart(void)
{
- uart_save.uart_lcr = mmio_read_32(PLAT_RK_UART_BASE + UART_LCR);
- uart_save.uart_ier = mmio_read_32(PLAT_RK_UART_BASE + UART_IER);
- uart_save.uart_mcr = mmio_read_32(PLAT_RK_UART_BASE + UART_MCR);
- mmio_write_32(PLAT_RK_UART_BASE + UART_LCR,
+ uint32_t uart_base = rockchip_get_uart_base();
+
+ if (uart_base == 0)
+ return;
+
+ uart_save.uart_lcr = mmio_read_32(uart_base + UART_LCR);
+ uart_save.uart_ier = mmio_read_32(uart_base + UART_IER);
+ uart_save.uart_mcr = mmio_read_32(uart_base + UART_MCR);
+ mmio_write_32(uart_base + UART_LCR,
uart_save.uart_lcr | UARTLCR_DLAB);
- uart_save.uart_dll = mmio_read_32(PLAT_RK_UART_BASE + UART_DLL);
- uart_save.uart_dlh = mmio_read_32(PLAT_RK_UART_BASE + UART_DLH);
- mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_save.uart_lcr);
+ uart_save.uart_dll = mmio_read_32(uart_base + UART_DLL);
+ uart_save.uart_dlh = mmio_read_32(uart_base + UART_DLH);
+ mmio_write_32(uart_base + UART_LCR, uart_save.uart_lcr);
}
void resume_uart(void)
{
+ uint32_t uart_base = rockchip_get_uart_base();
uint32_t uart_lcr;
- mmio_write_32(PLAT_RK_UART_BASE + UARTSRR,
+ if (uart_base == 0)
+ return;
+
+ mmio_write_32(uart_base + UARTSRR,
XMIT_FIFO_RESET | RCVR_FIFO_RESET | UART_RESET);
- uart_lcr = mmio_read_32(PLAT_RK_UART_BASE + UART_LCR);
- mmio_write_32(PLAT_RK_UART_BASE + UART_MCR, DIAGNOSTIC_MODE);
- mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_lcr | UARTLCR_DLAB);
- mmio_write_32(PLAT_RK_UART_BASE + UART_DLL, uart_save.uart_dll);
- mmio_write_32(PLAT_RK_UART_BASE + UART_DLH, uart_save.uart_dlh);
- mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_save.uart_lcr);
- mmio_write_32(PLAT_RK_UART_BASE + UART_IER, uart_save.uart_ier);
- mmio_write_32(PLAT_RK_UART_BASE + UART_FCR, UARTFCR_FIFOEN);
- mmio_write_32(PLAT_RK_UART_BASE + UART_MCR, uart_save.uart_mcr);
+ uart_lcr = mmio_read_32(uart_base + UART_LCR);
+ mmio_write_32(uart_base + UART_MCR, DIAGNOSTIC_MODE);
+ mmio_write_32(uart_base + UART_LCR, uart_lcr | UARTLCR_DLAB);
+ mmio_write_32(uart_base + UART_DLL, uart_save.uart_dll);
+ mmio_write_32(uart_base + UART_DLH, uart_save.uart_dlh);
+ mmio_write_32(uart_base + UART_LCR, uart_save.uart_lcr);
+ mmio_write_32(uart_base + UART_IER, uart_save.uart_ier);
+ mmio_write_32(uart_base + UART_FCR, UARTFCR_FIFOEN);
+ mmio_write_32(uart_base + UART_MCR, uart_save.uart_mcr);
}
void save_usbphy(void)
diff --git a/services/spd/opteed/opteed.mk b/services/spd/opteed/opteed.mk
index b1b2175..643b054 100644
--- a/services/spd/opteed/opteed.mk
+++ b/services/spd/opteed/opteed.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -13,3 +13,6 @@
services/spd/opteed/opteed_pm.c
NEED_BL32 := yes
+
+# required so that optee code can control access to the timer registers
+NS_TIMER_SWITCH := 1
diff --git a/services/std_svc/spm/spm_buffers.c b/services/std_svc/spm/spm_buffers.c
index 3e0c949..79398ba 100644
--- a/services/std_svc/spm/spm_buffers.c
+++ b/services/std_svc/spm/spm_buffers.c
@@ -38,6 +38,8 @@
struct sprt_response *resp = &(responses[i]);
if ((resp->is_valid == 1) && (resp->token == token)) {
+ spin_unlock(&responses_lock);
+
return -1;
}
}