diff --git a/plat/intel/soc/stratix10/bl31_plat_setup.c b/plat/intel/soc/stratix10/bl31_plat_setup.c
new file mode 100644
index 0000000..21a3708
--- /dev/null
+++ b/plat/intel/soc/stratix10/bl31_plat_setup.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <drivers/console.h>
+#include <drivers/delay_timer.h>
+#include <drivers/arm/gic_common.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/ti/uart/uart_16550.h>
+#include <drivers/generic_delay_timer.h>
+#include <drivers/arm/gicv2.h>
+#include <s10_mailbox.h>
+#include <lib/xlat_tables/xlat_tables.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <platform_private.h>
+
+#include "aarch64/stratix10_private.h"
+#include "s10_handoff.h"
+#include "s10_reset_manager.h"
+#include "s10_memory_controller.h"
+#include "s10_pinmux.h"
+#include "s10_clock_manager.h"
+#include "s10_system_manager.h"
+
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	next_image_info = (type == NON_SECURE) ?
+			  &bl33_image_ep_info : &bl32_image_ep_info;
+
+	/* None of the images on this platform can have 0x0 as the entrypoint */
+	if (next_image_info->pc)
+		return next_image_info;
+	else
+		return NULL;
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	static console_16550_t console;
+
+	console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
+		&console);
+	/*
+	 * Check params passed from BL31 should not be NULL,
+	 */
+	void *from_bl2 = (void *) arg0;
+
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+	assert(params_from_bl2 != NULL);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	/*
+	 * Copy BL32 (if populated by BL31) and BL33 entry point information.
+	 * They are stored in Secure RAM, in BL31's address space.
+	 */
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	while (bl_params) {
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+}
+
+static const interrupt_prop_t s10_interrupt_props[] = {
+	PLAT_INTEL_S10_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
+	PLAT_INTEL_S10_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const gicv2_driver_data_t plat_gicv2_gic_data = {
+	.gicd_base = PLAT_INTEL_S10_GICD_BASE,
+	.gicc_base = PLAT_INTEL_S10_GICC_BASE,
+	.interrupt_props = s10_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(s10_interrupt_props),
+	.target_masks = target_mask_array,
+	.target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Perform any BL3-1 platform setup code
+ ******************************************************************************/
+void bl31_platform_setup(void)
+{
+	/* Initialize the gic cpu and distributor interfaces */
+	gicv2_driver_init(&plat_gicv2_gic_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+const mmap_region_t plat_stratix10_mmap[] = {
+	MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE, MT_MEMORY | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE2_BASE, DEVICE2_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE,
+		MT_NON_CACHEABLE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(DEVICE3_BASE, DEVICE3_SIZE,
+		MT_DEVICE | MT_RW | MT_SECURE),
+	MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	MAP_REGION_FLAT(DEVICE4_BASE, DEVICE4_SIZE, MT_DEVICE | MT_RW | MT_NS),
+	{0},
+};
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only intializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bl31_plat_arch_setup(void)
+{
+	const mmap_region_t bl_regions[] = {
+		MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
+			MT_MEMORY | MT_RW | MT_SECURE),
+		MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
+			MT_CODE | MT_SECURE),
+		MAP_REGION_FLAT(BL_RO_DATA_BASE,
+			BL_RO_DATA_END - BL_RO_DATA_BASE,
+			MT_RO_DATA | MT_SECURE),
+#if USE_COHERENT_MEM
+		MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
+			BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
+			MT_DEVICE | MT_RW | MT_SECURE),
+#endif
+		{0},
+	};
+
+	setup_page_tables(bl_regions, plat_stratix10_mmap);
+	enable_mmu_el3(0);
+}
+