Merge pull request #1256 from jeenu-arm/tsp-ehf
TSP changes for EHF
diff --git a/Makefile b/Makefile
index 3b2e120..83b8808 100644
--- a/Makefile
+++ b/Makefile
@@ -193,6 +193,7 @@
lib/${ARCH}/cache_helpers.S \
lib/${ARCH}/misc_helpers.S \
plat/common/plat_log_common.c \
+ plat/common/platform_helpers_default.c \
plat/common/${ARCH}/plat_common.c \
plat/common/${ARCH}/platform_helpers.S \
${COMPILER_RT_SRCS} \
@@ -600,38 +601,39 @@
FIP_BL2_ARGS := tb-fw
endif
-$(if ${BL2}, $(eval $(call MAKE_TOOL_ARGS,2,${BL2},${FIP_BL2_ARGS})),\
+$(if ${BL2}, $(eval $(call TOOL_ADD_IMG,bl2,--${FIP_BL2_ARGS})),\
$(eval $(call MAKE_BL,2,${FIP_BL2_ARGS})))
endif
ifeq (${NEED_SCP_BL2},yes)
-$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
+$(eval $(call TOOL_ADD_IMG,scp_bl2,--scp-fw))
endif
ifeq (${NEED_BL31},yes)
BL31_SOURCES += ${SPD_SOURCES}
-$(if ${BL31}, $(eval $(call MAKE_TOOL_ARGS,31,${BL31},soc-fw)),\
+$(if ${BL31}, $(eval $(call TOOL_ADD_IMG,bl31,--soc-fw)),\
$(eval $(call MAKE_BL,31,soc-fw)))
endif
# If a BL32 image is needed but neither BL32 nor BL32_SOURCES is defined, the
-# build system will call FIP_ADD_IMG to print a warning message and abort the
+# build system will call TOOL_ADD_IMG to print a warning message and abort the
# process. Note that the dependency on BL32 applies to the FIP only.
ifeq (${NEED_BL32},yes)
-$(if ${BL32}, $(eval $(call MAKE_TOOL_ARGS,32,${BL32},tos-fw)),\
- $(if ${BL32_SOURCES}, $(eval $(call MAKE_BL,32,tos-fw)),\
- $(eval $(call FIP_ADD_IMG,BL32,--tos-fw))))
+
+BUILD_BL32 := $(if $(BL32),,$(if $(BL32_SOURCES),1))
+
+$(if ${BUILD_BL32}, $(eval $(call MAKE_BL,32,tos-fw)),\
+ $(eval $(call TOOL_ADD_IMG,bl32,--tos-fw)))
endif
# Add the BL33 image if required by the platform
ifeq (${NEED_BL33},yes)
-$(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
+$(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
endif
ifeq (${NEED_BL2U},yes)
-BL2U_PATH := $(if ${BL2U},${BL2U},$(call IMG_BIN,2u))
-$(if ${BL2U}, ,$(eval $(call MAKE_BL,2u)))
-$(eval $(call FWU_FIP_ADD_PAYLOAD,${BL2U_PATH},--ap-fwu-cfg))
+$(if ${BL2U}, $(eval $(call TOOL_ADD_IMG,bl2u,--ap-fwu-cfg,FWU_)),\
+ $(eval $(call MAKE_BL,2u,ap-fwu-cfg,FWU_)))
endif
# Expand build macros for the different images
diff --git a/bl1/aarch32/bl1_exceptions.S b/bl1/aarch32/bl1_exceptions.S
index f73db40..a1e32f0 100644
--- a/bl1/aarch32/bl1_exceptions.S
+++ b/bl1/aarch32/bl1_exceptions.S
@@ -73,6 +73,11 @@
ldr r1, [r8, #(ENTRY_POINT_INFO_PC_OFFSET + 4)]
msr spsr, r1
+ /* Some BL32 stages expect lr_svc to provide the BL33 entry address */
+ cps #MODE32_svc
+ ldr lr, [r8, #ENTRY_POINT_INFO_LR_SVC_OFFSET]
+ cps #MODE32_mon
+
add r8, r8, #ENTRY_POINT_INFO_ARGS_OFFSET
ldm r8, {r0, r1, r2, r3}
eret
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index 821b6a3..91b5f0b 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -178,6 +178,12 @@
INFO("BL1: Loading BL2\n");
#if LOAD_IMAGE_V2
+ err = bl1_plat_handle_pre_image_load();
+ if (err) {
+ ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
+ plat_error_handler(err);
+ }
+
err = load_auth_image(BL2_IMAGE_ID, image_info);
#else
/* Load the BL2 image */
@@ -194,6 +200,14 @@
plat_error_handler(err);
}
+#if LOAD_IMAGE_V2
+ /* Allow platform to handle image information. */
+ err = bl1_plat_handle_post_image_load();
+ if (err) {
+ ERROR("Failure in post image load handling of BL2 (%d)\n", err);
+ plat_error_handler(err);
+ }
+
/*
* Create a new layout of memory for BL2 as seen by BL1 i.e.
* tell it the amount of total and free memory available.
@@ -201,7 +215,6 @@
* to BL2. BL2 will read the memory layout before using its
* memory for other purposes.
*/
-#if LOAD_IMAGE_V2
bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->total_base;
#else
bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
diff --git a/bl2/bl2_image_load_v2.c b/bl2/bl2_image_load_v2.c
index 6517703..f51dea8 100644
--- a/bl2/bl2_image_load_v2.c
+++ b/bl2/bl2_image_load_v2.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -54,6 +54,12 @@
}
}
+ err = bl2_plat_handle_pre_image_load(bl2_node_info->image_id);
+ if (err) {
+ ERROR("BL2: Failure in pre image load handling (%i)\n", err);
+ plat_error_handler(err);
+ }
+
if (!(bl2_node_info->image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
INFO("BL2: Loading image id %d\n", bl2_node_info->image_id);
err = load_auth_image(bl2_node_info->image_id,
@@ -87,8 +93,10 @@
assert(bl2_to_next_bl_params->h.version >= VERSION_2);
assert(bl2_to_next_bl_params->head->ep_info);
- /* Populate arg0 for the next BL image */
- bl2_to_next_bl_params->head->ep_info->args.arg0 = (u_register_t)bl2_to_next_bl_params;
+ /* Populate arg0 for the next BL image if not already provided */
+ if (bl2_to_next_bl_params->head->ep_info->args.arg0 == (u_register_t)0)
+ bl2_to_next_bl_params->head->ep_info->args.arg0 =
+ (u_register_t)bl2_to_next_bl_params;
/* Flush the parameters to be passed to next image */
plat_flush_next_bl_params();
diff --git a/bl32/optee/optee.mk b/bl32/optee/optee.mk
new file mode 100644
index 0000000..462020f
--- /dev/null
+++ b/bl32/optee/optee.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# This makefile only aims at complying with ARM Trusted Firmware build process so
+# that "optee" is a valid ARM Trusted Firmware AArch32 Secure Playload identifier.
+
+ifneq ($(ARCH),aarch32)
+$(error This directory targets AArch32 support)
+endif
+
+$(eval $(call add_define,AARCH32_SP_OPTEE))
+
+$(info ARM Trusted Firmware built for OP-TEE payload support)
diff --git a/common/image_decompress.c b/common/image_decompress.c
new file mode 100644
index 0000000..7bd02b1
--- /dev/null
+++ b/common/image_decompress.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <image_decompress.h>
+#include <stdint.h>
+
+static uintptr_t decompressor_buf_base;
+static uint32_t decompressor_buf_size;
+static decompressor_t *decompressor;
+static struct image_info saved_image_info;
+
+void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
+ decompressor_t *_decompressor)
+{
+ decompressor_buf_base = buf_base;
+ decompressor_buf_size = buf_size;
+ decompressor = _decompressor;
+}
+
+void image_decompress_prepare(struct image_info *info)
+{
+ /*
+ * If the image is compressed, it should be loaded into the temporary
+ * buffer instead of its final destination. We save image_info, then
+ * override ->image_base and ->image_max_size so that load_image() will
+ * transfer the compressed data to the temporary buffer.
+ */
+ saved_image_info = *info;
+ info->image_base = decompressor_buf_base;
+ info->image_max_size = decompressor_buf_size;
+}
+
+int image_decompress(struct image_info *info)
+{
+ uintptr_t compressed_image_base, image_base, work_base;
+ uint32_t compressed_image_size, work_size;
+ int ret;
+
+ /*
+ * The size of compressed data has been filled by load_image().
+ * Read it out before restoring image_info.
+ */
+ compressed_image_size = info->image_size;
+ compressed_image_base = info->image_base;
+ *info = saved_image_info;
+
+ assert(compressed_image_size <= decompressor_buf_size);
+
+ image_base = info->image_base;
+
+ /*
+ * Use the rest of the temporary buffer as workspace of the
+ * decompressor since the decompressor may need additional memory.
+ */
+ work_base = compressed_image_base + compressed_image_size;
+ work_size = decompressor_buf_size - compressed_image_size;
+
+ ret = decompressor(&compressed_image_base, compressed_image_size,
+ &image_base, info->image_max_size,
+ work_base, work_size);
+ if (ret) {
+ ERROR("Failed to decompress image (err=%d)\n", ret);
+ return ret;
+ }
+
+ /* image_base is updated to the final pos when decompressor() exits. */
+ info->image_size = image_base - info->image_base;
+
+ flush_dcache_range(info->image_base, info->image_size);
+
+ return 0;
+}
diff --git a/docs/porting-guide.rst b/docs/porting-guide.rst
index 7683ded..de05e03 100644
--- a/docs/porting-guide.rst
+++ b/docs/porting-guide.rst
@@ -1259,6 +1259,30 @@
the firmware update images defined in the Trusted Board Boot Requirements
specification.
+Function : bl1\_plat\_handle\_pre\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+ Argument : void
+ Return : int
+
+This function can be used by the platforms to update/use image information
+for BL2. This function is currently invoked in BL1 before loading BL2,
+when LOAD\_IMAGE\_V2 is enabled.
+
+Function : bl1\_plat\_handle\_post\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+ Argument : void
+ Return : int
+
+This function can be used by the platforms to update/use image information
+for BL2. This function is currently invoked in BL1 after loading BL2,
+when LOAD\_IMAGE\_V2 is enabled.
+
Function : bl1\_plat\_fwu\_done() [optional]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -1424,10 +1448,22 @@
populated with the extents of secure RAM available for BL2 to use. See
``bl2_early_platform_setup()`` above.
+Following functions are optionally used only when LOAD\_IMAGE\_V2 is enabled.
+
+Function : bl2\_plat\_handle\_pre\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
-Following function is required only when LOAD\_IMAGE\_V2 is enabled.
+::
+
+ Argument : unsigned int
+ Return : int
+
+This function can be used by the platforms to update/use image information
+for given ``image_id``. This function is currently invoked in BL2 before
+loading each image, when LOAD\_IMAGE\_V2 is enabled.
-Function : bl2\_plat\_handle\_post\_image\_load() [mandatory]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Function : bl2\_plat\_handle\_post\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
::
@@ -1435,9 +1471,8 @@
Return : int
This function can be used by the platforms to update/use image information
-for given ``image_id``. This function is currently invoked in BL2 to handle
-BL image specific information based on the ``image_id`` passed, when
-LOAD\_IMAGE\_V2 is enabled.
+for given ``image_id``. This function is currently invoked in BL2 after
+loading each image, when LOAD\_IMAGE\_V2 is enabled.
Following functions are required only when LOAD\_IMAGE\_V2 is disabled.
diff --git a/include/common/ep_info.h b/include/common/ep_info.h
index 3f6213f..3c2fe44 100644
--- a/include/common/ep_info.h
+++ b/include/common/ep_info.h
@@ -20,7 +20,8 @@
******************************************************************************/
#define ENTRY_POINT_INFO_PC_OFFSET U(0x08)
#ifdef AARCH32
-#define ENTRY_POINT_INFO_ARGS_OFFSET U(0x10)
+#define ENTRY_POINT_INFO_LR_SVC_OFFSET U(0x10)
+#define ENTRY_POINT_INFO_ARGS_OFFSET U(0x14)
#else
#define ENTRY_POINT_INFO_ARGS_OFFSET U(0x18)
#endif
@@ -93,6 +94,7 @@
uintptr_t pc;
uint32_t spsr;
#ifdef AARCH32
+ uintptr_t lr_svc;
aapcs32_params_t args;
#else
aapcs64_params_t args;
@@ -108,6 +110,12 @@
__builtin_offsetof(entry_point_info_t, pc), \
assert_BL31_pc_offset_mismatch);
+#ifdef AARCH32
+CASSERT(ENTRY_POINT_INFO_LR_SVC_OFFSET ==
+ __builtin_offsetof(entry_point_info_t, lr_svc),
+ assert_entrypoint_lr_offset_error);
+#endif
+
CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
__builtin_offsetof(entry_point_info_t, args), \
assert_BL31_args_offset_mismatch);
diff --git a/include/common/image_decompress.h b/include/common/image_decompress.h
new file mode 100644
index 0000000..aed8df3
--- /dev/null
+++ b/include/common/image_decompress.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __IMAGE_DECOMPRESS_H__
+#define __IMAGE_DECOMPRESS_H__
+
+#include <stddef.h>
+#include <stdint.h>
+
+struct image_info;
+
+typedef int (decompressor_t)(uintptr_t *in_buf, size_t in_len,
+ uintptr_t *out_buf, size_t out_len,
+ uintptr_t work_buf, size_t work_len);
+
+void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
+ decompressor_t *decompressor);
+void image_decompress_prepare(struct image_info *info);
+int image_decompress(struct image_info *info);
+
+#endif /* __IMAGE_DECOMPRESS_H___ */
diff --git a/include/lib/zlib/tf_gunzip.h b/include/lib/zlib/tf_gunzip.h
new file mode 100644
index 0000000..46d20eb
--- /dev/null
+++ b/include/lib/zlib/tf_gunzip.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __TF_GUNZIP_H__
+#define __TF_GUNZIP_H__
+
+#include <stddef.h>
+#include <stdint.h>
+
+int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
+ size_t out_len, uintptr_t work_buf, size_t work_len);
+
+#endif /* __TF_GUNZIP_H___ */
diff --git a/include/plat/common/platform.h b/include/plat/common/platform.h
index 0960105..e2f1cfd 100644
--- a/include/plat/common/platform.h
+++ b/include/plat/common/platform.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -155,6 +155,15 @@
*/
__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
+#if LOAD_IMAGE_V2
+/*
+ * This function can be used by the platforms to update/use image
+ * information for BL2.
+ */
+int bl1_plat_handle_pre_image_load(void);
+int bl1_plat_handle_post_image_load(void);
+
+#endif /* LOAD_IMAGE_V2 */
/*******************************************************************************
* Mandatory BL2 functions
@@ -169,6 +178,7 @@
* This function can be used by the platforms to update/use image
* information for given `image_id`.
*/
+int bl2_plat_handle_pre_image_load(unsigned int image_id);
int bl2_plat_handle_post_image_load(unsigned int image_id);
#else /* LOAD_IMAGE_V2 */
diff --git a/lib/aarch64/misc_helpers.S b/lib/aarch64/misc_helpers.S
index 9dfe46a..3c64d3c 100644
--- a/lib/aarch64/misc_helpers.S
+++ b/lib/aarch64/misc_helpers.S
@@ -198,7 +198,7 @@
* Check for M bit (MMU enabled) of the current SCTLR_EL(1|3)
* register value and panic if the MMU is disabled.
*/
-#if defined(IMAGE_BL1) || defined(IMAGE_BL31)
+#if defined(IMAGE_BL1) || defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3)
mrs tmp1, sctlr_el3
#else
mrs tmp1, sctlr_el1
diff --git a/lib/optee/optee_utils.c b/lib/optee/optee_utils.c
index deb948c..87e52bd 100644
--- a/lib/optee/optee_utils.c
+++ b/lib/optee/optee_utils.c
@@ -158,9 +158,12 @@
* and BL32_EXTRA2_IMAGE_ID to load pager and paged bin.
*/
if (!tee_validate_header(optee_header)) {
- INFO("Invalid OPTEE header, legacy mode.\n");
- /* Set legacy OPTEE runtime arch - aarch64 */
+ INFO("Invalid OPTEE header, set legacy mode.\n");
+#ifdef AARCH64
header_ep->args.arg0 = MODE_RW_64;
+#else
+ header_ep->args.arg0 = MODE_RW_32;
+#endif
return 0;
}
@@ -208,10 +211,16 @@
header_ep->args.arg2 = paged_image_info->image_size;
/* Set OPTEE runtime arch - aarch32/aarch64 */
- if (optee_header->arch == 0)
+ if (optee_header->arch == 0) {
header_ep->args.arg0 = MODE_RW_32;
- else
+ } else {
+#ifdef AARCH64
header_ep->args.arg0 = MODE_RW_64;
+#else
+ ERROR("Cannot boot an AArch64 OP-TEE\n");
+ return -1;
+#endif
+ }
return 0;
}
diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c
new file mode 100644
index 0000000..d0be438
--- /dev/null
+++ b/lib/zlib/adler32.c
@@ -0,0 +1,186 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521U /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+ try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+ (thank you to John Reiser for pointing this out) */
+# define CHOP(a) \
+ do { \
+ unsigned long tmp = a >> 16; \
+ a &= 0xffffUL; \
+ a += (tmp << 4) - tmp; \
+ } while (0)
+# define MOD28(a) \
+ do { \
+ CHOP(a); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+# define MOD(a) \
+ do { \
+ CHOP(a); \
+ MOD28(a); \
+ } while (0)
+# define MOD63(a) \
+ do { /* this assumes a is not negative */ \
+ z_off64_t tmp = a >> 32; \
+ a &= 0xffffffffL; \
+ a += (tmp << 8) - (tmp << 5) + tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+#else
+# define MOD(a) a %= BASE
+# define MOD28(a) a %= BASE
+# define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_z(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ z_size_t len;
+{
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD28(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
+ DO16(buf);
+ buf += 16;
+ }
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ uInt len;
+{
+ return adler32_z(adler, buf, len);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* for negative len, return invalid adler32 as a clue for debugging */
+ if (len2 < 0)
+ return 0xffffffffUL;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ MOD63(len2); /* assumes len2 >= 0 */
+ rem = (unsigned)len2;
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
+ if (sum2 >= BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
diff --git a/lib/zlib/crc32.c b/lib/zlib/crc32.c
new file mode 100644
index 0000000..9580440
--- /dev/null
+++ b/lib/zlib/crc32.c
@@ -0,0 +1,442 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors. This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+ Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+ protection on the static variables used to control the first-use generation
+ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+ first call get_crc_table() to initialize the tables before allowing more than
+ one thread to use crc32().
+
+ DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+# include <stdio.h>
+# ifndef DYNAMIC_CRC_TABLE
+# define DYNAMIC_CRC_TABLE
+# endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h" /* for STDC and FAR definitions */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+# define BYFOUR
+#endif
+#ifdef BYFOUR
+ local unsigned long crc32_little OF((unsigned long,
+ const unsigned char FAR *, z_size_t));
+ local unsigned long crc32_big OF((unsigned long,
+ const unsigned char FAR *, z_size_t));
+# define TBLS 8
+#else
+# define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+ local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+ Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+ x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+ Polynomials over GF(2) are represented in binary, one bit per coefficient,
+ with the lowest powers in the most significant bit. Then adding polynomials
+ is just exclusive-or, and multiplying a polynomial by x is a right shift by
+ one. If we call the above polynomial p, and represent a byte as the
+ polynomial q, also with the lowest power in the most significant bit (so the
+ byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+ where a mod b means the remainder after dividing a by b.
+
+ This calculation is done using the shift-register method of multiplying and
+ taking the remainder. The register is initialized to zero, and for each
+ incoming bit, x^32 is added mod p to the register if the bit is a one (where
+ x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+ x (which is shifting right by one and adding x^32 mod p if the bit shifted
+ out is a one). We start with the highest power (least significant bit) of
+ q and repeat for all eight bits of q.
+
+ The first table is simply the CRC of all possible eight bit values. This is
+ all the information needed to generate CRCs on data a byte at a time for all
+ combinations of CRC register values and incoming bytes. The remaining tables
+ allow for word-at-a-time CRC calculation for both big-endian and little-
+ endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+ z_crc_t c;
+ int n, k;
+ z_crc_t poly; /* polynomial exclusive-or pattern */
+ /* terms of polynomial defining this crc (except x^32): */
+ static volatile int first = 1; /* flag to limit concurrent making */
+ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+ /* See if another task is already doing this (not thread-safe, but better
+ than nothing -- significantly reduces duration of vulnerability in
+ case the advice about DYNAMIC_CRC_TABLE is ignored) */
+ if (first) {
+ first = 0;
+
+ /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+ poly = 0;
+ for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+ poly |= (z_crc_t)1 << (31 - p[n]);
+
+ /* generate a crc for every 8-bit value */
+ for (n = 0; n < 256; n++) {
+ c = (z_crc_t)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[0][n] = c;
+ }
+
+#ifdef BYFOUR
+ /* generate crc for each value followed by one, two, and three zeros,
+ and then the byte reversal of those as well as the first table */
+ for (n = 0; n < 256; n++) {
+ c = crc_table[0][n];
+ crc_table[4][n] = ZSWAP32(c);
+ for (k = 1; k < 4; k++) {
+ c = crc_table[0][c & 0xff] ^ (c >> 8);
+ crc_table[k][n] = c;
+ crc_table[k + 4][n] = ZSWAP32(c);
+ }
+ }
+#endif /* BYFOUR */
+
+ crc_table_empty = 0;
+ }
+ else { /* not first */
+ /* wait for the other guy to finish (not efficient, but rare) */
+ while (crc_table_empty)
+ ;
+ }
+
+#ifdef MAKECRCH
+ /* write out CRC tables to crc32.h */
+ {
+ FILE *out;
+
+ out = fopen("crc32.h", "w");
+ if (out == NULL) return;
+ fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+ fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+ fprintf(out, "local const z_crc_t FAR ");
+ fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
+ write_table(out, crc_table[0]);
+# ifdef BYFOUR
+ fprintf(out, "#ifdef BYFOUR\n");
+ for (k = 1; k < 8; k++) {
+ fprintf(out, " },\n {\n");
+ write_table(out, crc_table[k]);
+ }
+ fprintf(out, "#endif\n");
+# endif /* BYFOUR */
+ fprintf(out, " }\n};\n");
+ fclose(out);
+ }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+ FILE *out;
+ const z_crc_t FAR *table;
+{
+ int n;
+
+ for (n = 0; n < 256; n++)
+ fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
+ (unsigned long)(table[n]),
+ n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+ return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32_z(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ z_size_t len;
+{
+ if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+ if (sizeof(void *) == sizeof(ptrdiff_t)) {
+ z_crc_t endian;
+
+ endian = 1;
+ if (*((unsigned char *)(&endian)))
+ return crc32_little(crc, buf, len);
+ else
+ return crc32_big(crc, buf, len);
+ }
+#endif /* BYFOUR */
+ crc = crc ^ 0xffffffffUL;
+ while (len >= 8) {
+ DO8;
+ len -= 8;
+ }
+ if (len) do {
+ DO1;
+ } while (--len);
+ return crc ^ 0xffffffffUL;
+}
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ uInt len;
+{
+ return crc32_z(crc, buf, len);
+}
+
+#ifdef BYFOUR
+
+/*
+ This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+ integer pointer type. This violates the strict aliasing rule, where a
+ compiler can assume, for optimization purposes, that two pointers to
+ fundamentally different types won't ever point to the same memory. This can
+ manifest as a problem only if one of the pointers is written to. This code
+ only reads from those pointers. So long as this code remains isolated in
+ this compilation unit, there won't be a problem. For this reason, this code
+ should not be copied and pasted into a compilation unit in which other code
+ writes to the buffer that is passed to these routines.
+ */
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+ c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+ crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ z_size_t len;
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = (z_crc_t)crc;
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOLIT32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOLIT4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *buf4++; \
+ c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+ crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ z_size_t len;
+{
+ register z_crc_t c;
+ register const z_crc_t FAR *buf4;
+
+ c = ZSWAP32((z_crc_t)crc);
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ len--;
+ }
+
+ buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOBIG32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOBIG4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+ unsigned long *mat;
+ unsigned long vec;
+{
+ unsigned long sum;
+
+ sum = 0;
+ while (vec) {
+ if (vec & 1)
+ sum ^= *mat;
+ vec >>= 1;
+ mat++;
+ }
+ return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+ unsigned long *square;
+ unsigned long *mat;
+{
+ int n;
+
+ for (n = 0; n < GF2_DIM; n++)
+ square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ int n;
+ unsigned long row;
+ unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
+ unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
+
+ /* degenerate case (also disallow negative lengths) */
+ if (len2 <= 0)
+ return crc1;
+
+ /* put operator for one zero bit in odd */
+ odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
+ row = 1;
+ for (n = 1; n < GF2_DIM; n++) {
+ odd[n] = row;
+ row <<= 1;
+ }
+
+ /* put operator for two zero bits in even */
+ gf2_matrix_square(even, odd);
+
+ /* put operator for four zero bits in odd */
+ gf2_matrix_square(odd, even);
+
+ /* apply len2 zeros to crc1 (first square will put the operator for one
+ zero byte, eight zero bits, in even) */
+ do {
+ /* apply zeros operator for this bit of len2 */
+ gf2_matrix_square(even, odd);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(even, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ if (len2 == 0)
+ break;
+
+ /* another iteration of the loop with odd and even swapped */
+ gf2_matrix_square(odd, even);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(odd, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ } while (len2 != 0);
+
+ /* return combined crc */
+ crc1 ^= crc2;
+ return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
diff --git a/lib/zlib/crc32.h b/lib/zlib/crc32.h
new file mode 100644
index 0000000..9e0c778
--- /dev/null
+++ b/lib/zlib/crc32.h
@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+ {
+ 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+ 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+ 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+ 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+ 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+ 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+ 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+ 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+ 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+ 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+ 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+ 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+ 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+ 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+ 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+ 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+ 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+ 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+ 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+ 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+ 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+ 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+ 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+ 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+ 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+ 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+ 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+ 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+ 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+ 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+ 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+ 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+ 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+ 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+ 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+ 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+ 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+ 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+ 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+ 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+ 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+ 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+ 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+ 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+ 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+ 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+ 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+ 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+ 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+ 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+ 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+ 0x2d02ef8dUL
+#ifdef BYFOUR
+ },
+ {
+ 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+ 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+ 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+ 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+ 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+ 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+ 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+ 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+ 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+ 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+ 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+ 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+ 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+ 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+ 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+ 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+ 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+ 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+ 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+ 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+ 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+ 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+ 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+ 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+ 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+ 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+ 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+ 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+ 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+ 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+ 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+ 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+ 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+ 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+ 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+ 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+ 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+ 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+ 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+ 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+ 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+ 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+ 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+ 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+ 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+ 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+ 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+ 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+ 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+ 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+ 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+ 0x9324fd72UL
+ },
+ {
+ 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+ 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+ 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+ 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+ 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+ 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+ 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+ 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+ 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+ 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+ 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+ 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+ 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+ 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+ 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+ 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+ 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+ 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+ 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+ 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+ 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+ 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+ 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+ 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+ 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+ 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+ 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+ 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+ 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+ 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+ 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+ 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+ 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+ 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+ 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+ 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+ 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+ 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+ 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+ 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+ 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+ 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+ 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+ 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+ 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+ 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+ 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+ 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+ 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+ 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+ 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+ 0xbe9834edUL
+ },
+ {
+ 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+ 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+ 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+ 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+ 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+ 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+ 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+ 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+ 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+ 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+ 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+ 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+ 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+ 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+ 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+ 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+ 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+ 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+ 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+ 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+ 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+ 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+ 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+ 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+ 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+ 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+ 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+ 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+ 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+ 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+ 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+ 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+ 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+ 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+ 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+ 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+ 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+ 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+ 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+ 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+ 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+ 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+ 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+ 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+ 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+ 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+ 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+ 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+ 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+ 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+ 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+ 0xde0506f1UL
+ },
+ {
+ 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+ 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+ 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+ 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+ 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+ 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+ 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+ 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+ 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+ 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+ 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+ 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+ 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+ 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+ 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+ 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+ 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+ 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+ 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+ 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+ 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+ 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+ 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+ 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+ 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+ 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+ 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+ 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+ 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+ 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+ 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+ 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+ 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+ 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+ 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+ 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+ 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+ 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+ 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+ 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+ 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+ 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+ 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+ 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+ 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+ 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+ 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+ 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+ 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+ 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+ 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+ 0x8def022dUL
+ },
+ {
+ 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+ 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+ 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+ 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+ 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+ 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+ 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+ 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+ 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+ 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+ 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+ 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+ 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+ 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+ 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+ 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+ 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+ 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+ 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+ 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+ 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+ 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+ 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+ 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+ 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+ 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+ 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+ 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+ 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+ 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+ 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+ 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+ 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+ 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+ 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+ 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+ 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+ 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+ 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+ 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+ 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+ 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+ 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+ 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+ 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+ 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+ 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+ 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+ 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+ 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+ 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+ 0x72fd2493UL
+ },
+ {
+ 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+ 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+ 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+ 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+ 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+ 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+ 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+ 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+ 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+ 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+ 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+ 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+ 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+ 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+ 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+ 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+ 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+ 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+ 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+ 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+ 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+ 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+ 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+ 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+ 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+ 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+ 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+ 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+ 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+ 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+ 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+ 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+ 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+ 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+ 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+ 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+ 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+ 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+ 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+ 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+ 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+ 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+ 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+ 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+ 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+ 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+ 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+ 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+ 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+ 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+ 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+ 0xed3498beUL
+ },
+ {
+ 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+ 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+ 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+ 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+ 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+ 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+ 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+ 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+ 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+ 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+ 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+ 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+ 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+ 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+ 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+ 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+ 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+ 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+ 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+ 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+ 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+ 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+ 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+ 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+ 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+ 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+ 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+ 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+ 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+ 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+ 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+ 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+ 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+ 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+ 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+ 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+ 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+ 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+ 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+ 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+ 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+ 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+ 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+ 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+ 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+ 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+ 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+ 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+ 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+ 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+ 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+ 0xf10605deUL
+#endif
+ }
+};
diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c
new file mode 100644
index 0000000..0dbd1db
--- /dev/null
+++ b/lib/zlib/inffast.c
@@ -0,0 +1,323 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef ASMINF
+# pragma message("Assembler code may have bugs -- use at your own risk")
+#else
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *in; /* local strm->next_in */
+ z_const unsigned char FAR *last; /* have enough input while in < last */
+ unsigned char FAR *out; /* local strm->next_out */
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
+ unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const FAR *lcode; /* local strm->lencode */
+ code const FAR *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code here; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char FAR *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ in = strm->next_in;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ wnext = state->wnext;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ here = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op == 0) { /* literal */
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ *out++ = (unsigned char)(here.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ Tracevv((stderr, "inflate: length %u\n", len));
+ if (bits < 15) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ here = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(*in++) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ Tracevv((stderr, "inflate: distance %u\n", dist));
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ if (state->sane) {
+ strm->msg =
+ (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (len <= op - whave) {
+ do {
+ *out++ = 0;
+ } while (--len);
+ continue;
+ }
+ len -= op - whave;
+ do {
+ *out++ = 0;
+ } while (--op > whave);
+ if (op == 0) {
+ from = out - dist;
+ do {
+ *out++ = *from++;
+ } while (--len);
+ continue;
+ }
+#endif
+ }
+ from = window;
+ if (wnext == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (wnext < op) { /* wrap around window */
+ from += wsize + wnext - op;
+ op -= wnext;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = window;
+ if (wnext < len) { /* some from start of window */
+ op = wnext;
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += wnext - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ *out++ = *from++;
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
+ len -= 3;
+ }
+ if (len) {
+ *out++ = *from++;
+ if (len > 1)
+ *out++ = *from++;
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ *out++ = *from++;
+ *out++ = *from++;
+ *out++ = *from++;
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ *out++ = *from++;
+ if (len > 1)
+ *out++ = *from++;
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ here = dcode[here.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ here = lcode[here.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in;
+ strm->next_out = out;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and wnext == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/lib/zlib/inffast.h b/lib/zlib/inffast.h
new file mode 100644
index 0000000..e5c1aa4
--- /dev/null
+++ b/lib/zlib/inffast.h
@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/lib/zlib/inffixed.h b/lib/zlib/inffixed.h
new file mode 100644
index 0000000..d628327
--- /dev/null
+++ b/lib/zlib/inffixed.h
@@ -0,0 +1,94 @@
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications.
+ It is part of the implementation of this library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c
new file mode 100644
index 0000000..ac333e8
--- /dev/null
+++ b/lib/zlib/inflate.c
@@ -0,0 +1,1561 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0 24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ * creation of window when not needed, minimize use of window when it is
+ * needed, make inffast.c even faster, implement gzip decoding, and to
+ * improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1 25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2 4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ * to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3 22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ * buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4 1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ * source file infback.c to provide a call-back interface to inflate for
+ * programs like gzip and unzip -- uses window as output buffer to avoid
+ * window copying
+ *
+ * 1.2.beta5 1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ * input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6 4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ * make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7 27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0 9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ * for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ * and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+# ifndef BUILDFIXED
+# define BUILDFIXED
+# endif
+#endif
+
+/* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ unsigned copy));
+#ifdef BUILDFIXED
+ void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+ unsigned len));
+
+local int inflateStateCheck(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (strm == Z_NULL ||
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+ return 1;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state == Z_NULL || state->strm != strm ||
+ state->mode < HEAD || state->mode > SYNC)
+ return 1;
+ return 0;
+}
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = Z_NULL;
+ if (state->wrap) /* to support ill-conceived Java test suite */
+ strm->adler = state->wrap & 1;
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+ state->sane = 1;
+ state->back = -1;
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->wsize = 0;
+ state->whave = 0;
+ state->wnext = 0;
+ return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+ int wrap;
+ struct inflate_state FAR *state;
+
+ /* get the state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* extract wrap request from windowBits parameter */
+ if (windowBits < 0) {
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ wrap = (windowBits >> 4) + 5;
+#ifdef GUNZIP
+ if (windowBits < 48)
+ windowBits &= 15;
+#endif
+ }
+
+ /* set number of window bits, free window if different */
+ if (windowBits && (windowBits < 8 || windowBits > 15))
+ return Z_STREAM_ERROR;
+ if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+ ZFREE(strm, state->window);
+ state->window = Z_NULL;
+ }
+
+ /* update state and reset the rest of it */
+ state->wrap = wrap;
+ state->wbits = (unsigned)windowBits;
+ return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+ int ret;
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)
+ ZALLOC(strm, 1, sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->strm = strm;
+ state->window = Z_NULL;
+ state->mode = HEAD; /* to pass state test in inflateReset2() */
+ ret = inflateReset2(strm, windowBits);
+ if (ret != Z_OK) {
+ ZFREE(strm, state);
+ strm->state = Z_NULL;
+ }
+ return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits < 0) {
+ state->hold = 0;
+ state->bits = 0;
+ return Z_OK;
+ }
+ if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += (unsigned)value << state->bits;
+ state->bits += (uInt)bits;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+ Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
+ defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
+ those tables to stdout, which would be piped to inffixed.h. A small program
+ can simply call makefixed to do this:
+
+ void makefixed(void);
+
+ int main(void)
+ {
+ makefixed();
+ return 0;
+ }
+
+ Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+ a.out > inffixed.h
+ */
+void makefixed()
+{
+ unsigned low, size;
+ struct inflate_state state;
+
+ fixedtables(&state);
+ puts(" /* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by makefixed().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 7) == 0) printf("\n ");
+ printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+ state.lencode[low].bits, state.lencode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+ state.distcode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. If window does not exist yet, create it. This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+ struct inflate_state FAR *state;
+ unsigned dist;
+
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* if it hasn't been done already, allocate space for the window */
+ if (state->window == Z_NULL) {
+ state->window = (unsigned char FAR *)
+ ZALLOC(strm, 1U << state->wbits,
+ sizeof(unsigned char));
+ if (state->window == Z_NULL) return 1;
+ }
+
+ /* if window not in use yet, initialize */
+ if (state->wsize == 0) {
+ state->wsize = 1U << state->wbits;
+ state->wnext = 0;
+ state->whave = 0;
+ }
+
+ /* copy state->wsize or less output bytes into the circular window */
+ if (copy >= state->wsize) {
+ zmemcpy(state->window, end - state->wsize, state->wsize);
+ state->wnext = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->wnext;
+ if (dist > copy) dist = copy;
+ zmemcpy(state->window + state->wnext, end - copy, dist);
+ copy -= dist;
+ if (copy) {
+ zmemcpy(state->window, end - copy, copy);
+ state->wnext = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->wnext += dist;
+ if (state->wnext == state->wsize) state->wnext = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+ return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+# define UPDATE(check, buf, len) \
+ (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+# define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+# define CRC2(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ check = crc32(check, hbuf, 2); \
+ } while (0)
+
+# define CRC4(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ hbuf[2] = (unsigned char)((word) >> 16); \
+ hbuf[3] = (unsigned char)((word) >> 24); \
+ check = crc32(check, hbuf, 4); \
+ } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+#ifdef GUNZIP
+ unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
+#endif
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+#ifdef GUNZIP
+ if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
+ if (state->wbits == 0)
+ state->wbits = 15;
+ state->check = crc32(0L, Z_NULL, 0);
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = FLAGS;
+ break;
+ }
+ state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
+ if (!(state->wrap & 1) || /* check if zlib header allowed */
+#else
+ if (
+#endif
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (state->wbits == 0)
+ state->wbits = len;
+ if (len > 15 || len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+#ifdef GUNZIP
+ case FLAGS:
+ NEEDBITS(16);
+ state->flags = (int)(hold);
+ if ((state->flags & 0xff) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ if (state->flags & 0xe000) {
+ strm->msg = (char *)"unknown header flags set";
+ state->mode = BAD;
+ break;
+ }
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = TIME;
+ case TIME:
+ NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC4(state->check, hold);
+ INITBITS();
+ state->mode = OS;
+ case OS:
+ NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = EXLEN;
+ case EXLEN:
+ if (state->flags & 0x0400) {
+ NEEDBITS(16);
+ state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ CRC2(state->check, hold);
+ INITBITS();
+ }
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
+ state->mode = EXTRA;
+ case EXTRA:
+ if (state->flags & 0x0400) {
+ copy = state->length;
+ if (copy > have) copy = have;
+ if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ state->length -= copy;
+ }
+ if (state->length) goto inf_leave;
+ }
+ state->length = 0;
+ state->mode = NAME;
+ case NAME:
+ if (state->flags & 0x0800) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = (Bytef)len;
+ } while (len && copy < have);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
+ state->mode = COMMENT;
+ case COMMENT:
+ if (state->flags & 0x1000) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = (Bytef)len;
+ } while (len && copy < have);
+ if ((state->flags & 0x0200) && (state->wrap & 4))
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
+ state->mode = HCRC;
+ case HCRC:
+ if (state->flags & 0x0200) {
+ NEEDBITS(16);
+ if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
+ strm->msg = (char *)"header crc mismatch";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
+ strm->adler = state->check = crc32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ break;
+#endif
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = ZSWAP32(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN_; /* decode codes */
+ if (flush == Z_TREES) {
+ DROPBITS(2);
+ goto inf_leave;
+ }
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+ state->mode = COPY_;
+ if (flush == Z_TREES) goto inf_leave;
+ case COPY_:
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (const code FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN_;
+ if (flush == Z_TREES) goto inf_leave;
+ case LEN_:
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ if (state->mode == TYPE)
+ state->back = -1;
+ break;
+ }
+ state->back = 0;
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ state->length = (unsigned)here.val;
+ if ((int)(here.op) == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ state->mode = LIT;
+ break;
+ }
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->back = -1;
+ state->mode = TYPE;
+ break;
+ }
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->was = state->length;
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->whave) {
+ if (state->sane) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ Trace((stderr, "inflate.c too far\n"));
+ copy -= state->whave;
+ if (copy > state->length) copy = state->length;
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = 0;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+#endif
+ }
+ if (copy > state->wnext) {
+ copy -= state->wnext;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->wnext - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if ((state->wrap & 4) && out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((state->wrap & 4) && (
+#ifdef GUNZIP
+ state->flags ? hold :
+#endif
+ ZSWAP32(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: check matches trailer\n"));
+ }
+#ifdef GUNZIP
+ state->mode = LENGTH;
+ case LENGTH:
+ if (state->wrap && state->flags) {
+ NEEDBITS(32);
+ if (hold != (state->total & 0xffffffffUL)) {
+ strm->msg = (char *)"incorrect length check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: length matches trailer\n"));
+ }
+#endif
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call updatewindow() to create and/or update the window state.
+ Note: a memory error from inflate() is non-recoverable.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+ (state->mode < CHECK || flush != Z_FINISH)))
+ if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if ((state->wrap & 4) && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+ strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0) +
+ (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+ return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (inflateStateCheck(strm))
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->window != Z_NULL) ZFREE(strm, state->window);
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* copy dictionary */
+ if (state->whave && dictionary != Z_NULL) {
+ zmemcpy(dictionary, state->window + state->wnext,
+ state->whave - state->wnext);
+ zmemcpy(dictionary + state->whave - state->wnext,
+ state->window, state->wnext);
+ }
+ if (dictLength != Z_NULL)
+ *dictLength = state->whave;
+ return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+ struct inflate_state FAR *state;
+ unsigned long dictid;
+ int ret;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary identifier */
+ if (state->mode == DICT) {
+ dictid = adler32(0L, Z_NULL, 0);
+ dictid = adler32(dictid, dictionary, dictLength);
+ if (dictid != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window using updatewindow(), which will amend the
+ existing dictionary if appropriate */
+ ret = updatewindow(strm, dictionary + dictLength, dictLength);
+ if (ret) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ state->havedict = 1;
+ Tracev((stderr, "inflate: dictionary set\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state FAR *state;
+
+ /* check parameters */
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+ struct inflate_state FAR *state;
+ struct inflate_state FAR *copy;
+ unsigned char FAR *window;
+ unsigned wsize;
+
+ /* check input */
+ if (inflateStateCheck(source) || dest == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)source->state;
+
+ /* allocate space */
+ copy = (struct inflate_state FAR *)
+ ZALLOC(source, 1, sizeof(struct inflate_state));
+ if (copy == Z_NULL) return Z_MEM_ERROR;
+ window = Z_NULL;
+ if (state->window != Z_NULL) {
+ window = (unsigned char FAR *)
+ ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+ if (window == Z_NULL) {
+ ZFREE(source, copy);
+ return Z_MEM_ERROR;
+ }
+ }
+
+ /* copy state */
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+ zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+ copy->strm = dest;
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
+ copy->next = copy->codes + (state->next - state->codes);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
+ copy->window = window;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ state->sane = !subvert;
+ return Z_OK;
+#else
+ (void)subvert;
+ state->sane = 1;
+ return Z_DATA_ERROR;
+#endif
+}
+
+int ZEXPORT inflateValidate(strm, check)
+z_streamp strm;
+int check;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (check)
+ state->wrap |= 4;
+ else
+ state->wrap &= ~4;
+ return Z_OK;
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (inflateStateCheck(strm))
+ return -(1L << 16);
+ state = (struct inflate_state FAR *)strm->state;
+ return (long)(((unsigned long)((long)state->back)) << 16) +
+ (state->mode == COPY ? state->length :
+ (state->mode == MATCH ? state->was - state->length : 0));
+}
+
+unsigned long ZEXPORT inflateCodesUsed(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (inflateStateCheck(strm)) return (unsigned long)-1;
+ state = (struct inflate_state FAR *)strm->state;
+ return (unsigned long)(state->next - state->codes);
+}
diff --git a/lib/zlib/inflate.h b/lib/zlib/inflate.h
new file mode 100644
index 0000000..a46cce6
--- /dev/null
+++ b/lib/zlib/inflate.h
@@ -0,0 +1,125 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip decoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD = 16180, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY_, /* i/o: same as COPY below, but only first time in */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN_, /* i: same as LEN below, but only first time in */
+ LEN, /* i: waiting for length/lit/eob code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib) or (raw)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+ HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ (raw) -> TYPEDO
+ Read deflate blocks:
+ TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+ STORED -> COPY_ -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN_
+ LEN_ -> LEN
+ Read deflate codes in fixed or dynamic block:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+ including the allocated sliding window, which is up to 32K bytes. */
+struct inflate_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip,
+ bit 2 true to validate check value */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+ int sane; /* if false, allow invalid distance too far */
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
+};
diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c
new file mode 100644
index 0000000..2ea08fc
--- /dev/null
+++ b/lib/zlib/inftrees.c
@@ -0,0 +1,304 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+ " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code here; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ unsigned match; /* use base and extra for symbol >= match */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)1;
+ here.val = (unsigned short)0;
+ *(*table)++ = here; /* make a table to force an error */
+ *(*table)++ = here;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min < max; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftrees.h
+ for more information.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ match = 20;
+ break;
+ case LENS:
+ base = lbase;
+ extra = lext;
+ match = 257;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ match = 0;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ here.bits = (unsigned char)(len - drop);
+ if (work[sym] + 1U < match) {
+ here.op = (unsigned char)0;
+ here.val = work[sym];
+ }
+ else if (work[sym] >= match) {
+ here.op = (unsigned char)(extra[work[sym] - match]);
+ here.val = base[work[sym] - match];
+ }
+ else {
+ here.op = (unsigned char)(32 + 64); /* end of block */
+ here.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = here;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /* fill in remaining table entry if code is incomplete (guaranteed to have
+ at most one remaining entry, since if the code is incomplete, the
+ maximum code length that was allowed to get this far is one bit) */
+ if (huff != 0) {
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)(len - drop);
+ here.val = (unsigned short)0;
+ next[huff] = here;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
diff --git a/lib/zlib/inftrees.h b/lib/zlib/inftrees.h
new file mode 100644
index 0000000..baa53a0
--- /dev/null
+++ b/lib/zlib/inftrees.h
@@ -0,0 +1,62 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1444, which is the sum of 852 for literal/length codes and 592 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in inflate.c and infback.c. If the root table size is
+ changed, then these maximum sizes would be need to be recalculated and
+ updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
diff --git a/lib/zlib/tf_gunzip.c b/lib/zlib/tf_gunzip.c
new file mode 100644
index 0000000..574d871
--- /dev/null
+++ b/lib/zlib/tf_gunzip.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <errno.h>
+#include <string.h>
+#include <tf_gunzip.h>
+#include <utils.h>
+
+#include "zutil.h"
+
+/*
+ * memory allocated by malloc() is supposed to be aligned for any built-in type
+ */
+#define ZALLOC_ALIGNMENT sizeof(void *)
+
+static uintptr_t zalloc_start;
+static uintptr_t zalloc_end;
+static uintptr_t zalloc_current;
+
+static void * ZLIB_INTERNAL zcalloc(void *opaque, unsigned int items,
+ unsigned int size)
+{
+ uintptr_t p, p_end;
+
+ size *= items;
+
+ p = round_up(zalloc_current, ZALLOC_ALIGNMENT);
+ p_end = p + size;
+
+ if (p_end > zalloc_end)
+ return NULL;
+
+ memset((void *)p, 0, size);
+
+ zalloc_current = p_end;
+
+ return (void *)p;
+}
+
+static void ZLIB_INTERNAL zfree(void *opaque, void *ptr)
+{
+}
+
+/*
+ * gunzip - decompress gzip data
+ * @in_buf: source of compressed input. Upon exit, the end of input.
+ * @in_len: length of in_buf
+ * @out_buf: destination of decompressed output. Upon exit, the end of output.
+ * @out_len: length of out_buf
+ * @work_buf: workspace
+ * @work_len: length of workspace
+ */
+int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
+ size_t out_len, uintptr_t work_buf, size_t work_len)
+{
+ z_stream stream;
+ int zret, ret;
+
+ zalloc_start = work_buf;
+ zalloc_end = work_buf + work_len;
+ zalloc_current = zalloc_start;
+
+ stream.next_in = (typeof(stream.next_in))*in_buf;
+ stream.avail_in = in_len;
+ stream.next_out = (typeof(stream.next_out))*out_buf;
+ stream.avail_out = out_len;
+ stream.zalloc = zcalloc;
+ stream.zfree = zfree;
+ stream.opaque = (voidpf)0;
+
+ zret = inflateInit(&stream);
+ if (zret != Z_OK) {
+ ERROR("zlib: inflate init failed (ret = %d)\n", zret);
+ return (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
+ }
+
+ zret = inflate(&stream, Z_NO_FLUSH);
+ if (zret == Z_STREAM_END) {
+ ret = 0;
+ } else {
+ if (stream.msg)
+ ERROR("%s\n", stream.msg);
+ ERROR("zlib: inflate failed (ret = %d)\n", zret);
+ ret = (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
+ }
+
+ VERBOSE("zlib: %lu byte input\n", stream.total_in);
+ VERBOSE("zlib: %lu byte output\n", stream.total_out);
+
+ *in_buf = (uintptr_t)stream.next_in;
+ *out_buf = (uintptr_t)stream.next_out;
+
+ inflateEnd(&stream);
+
+ return ret;
+}
diff --git a/lib/zlib/zconf.h b/lib/zlib/zconf.h
new file mode 100644
index 0000000..5e1d68a
--- /dev/null
+++ b/lib/zlib/zconf.h
@@ -0,0 +1,534 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# define adler32_z z_adler32_z
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define crc32_z z_crc32_z
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateGetDictionary z_deflateGetDictionary
+# define deflateInit z_deflateInit
+# define deflateInit2 z_deflateInit2
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzfread z_gzfread
+# define gzfwrite z_gzfwrite
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzvprintf z_gzvprintf
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit z_inflateBackInit
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCodesUsed z_inflateCodesUsed
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit z_inflateInit
+# define inflateInit2 z_inflateInit2
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateResetKeep z_inflateResetKeep
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateValidate z_inflateValidate
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# define uncompress2 z_uncompress2
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
+# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
+#endif
+
+#ifdef Z_SOLO
+ typedef unsigned long z_size_t;
+#else
+# define z_longlong long long
+# if defined(NO_SIZE_T)
+ typedef unsigned NO_SIZE_T z_size_t;
+# elif defined(STDC)
+# include <stddef.h>
+ typedef size_t z_size_t;
+# else
+ typedef unsigned long z_size_t;
+# endif
+# undef z_longlong
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
+#else
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h
new file mode 100644
index 0000000..f09cdaf
--- /dev/null
+++ b/lib/zlib/zlib.h
@@ -0,0 +1,1912 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.2.11, January 15th, 2017
+
+ Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+ (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 11
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip and raw deflate streams in
+ memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in the case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ z_const Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total number of input bytes read so far */
+
+ Bytef *next_out; /* next output byte will go here */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total number of bytes output so far */
+
+ z_const char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: binary or text
+ for deflate, or the decoding state for inflate */
+ uLong adler; /* Adler-32 or CRC-32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe. In that case, zlib is thread-safe. When zalloc and zfree are
+ Z_NULL on entry to the initialization function, they are set to internal
+ routines that use the standard library functions malloc() and free().
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use by the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field for deflate() */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Generate more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary. Some output may be provided even if
+ flush is zero.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending. See deflatePending(),
+ which can be used if desired to determine whether or not there is more ouput
+ in that case.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed
+ codes block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space. If deflate returns with Z_OK or Z_BUF_ERROR, this
+ function must be called again with Z_FINISH and more output space (updated
+ avail_out) but no more input data, until it returns with Z_STREAM_END or an
+ error. After deflate has returned Z_STREAM_END, the only possible operations
+ on the stream are deflateReset or deflateEnd.
+
+ Z_FINISH can be used in the first deflate call after deflateInit if all the
+ compression is to be done in a single step. In order to complete in one
+ call, avail_out must be at least the value returned by deflateBound (see
+ below). Then deflate is guaranteed to return Z_STREAM_END. If not enough
+ output space is provided, deflate will not return Z_STREAM_END, and it must
+ be called again as described above.
+
+ deflate() sets strm->adler to the Adler-32 checksum of all input read
+ so far (that is, total_in bytes). If a gzip stream is being generated, then
+ strm->adler will be the CRC-32 checksum of the input read so far. (See
+ deflateInit2 below.)
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). If in doubt, the data is
+ considered binary. This field is only for information purposes and does not
+ affect the compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was Z_NULL or the state was inadvertently written over
+ by the application), or Z_BUF_ERROR if no progress is possible (for example
+ avail_in or avail_out was zero). Note that Z_BUF_ERROR is not fatal, and
+ deflate() can be called again with more input and more output space to
+ continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. In the current version of inflate, the provided input is not
+ read or consumed. The allocation of a sliding window will be deferred to
+ the first call of inflate (if the decompression does not complete on the
+ first call). If zalloc and zfree are set to Z_NULL, inflateInit updates
+ them to use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression.
+ Actual decompression will be done by inflate(). So next_in, and avail_in,
+ next_out, and avail_out are unused and unchanged. The current
+ implementation of inflateInit() does not process any header information --
+ that is deferred until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), then next_in and avail_in are updated
+ accordingly, and processing will resume at this point for the next call of
+ inflate().
+
+ - Generate more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. If the
+ caller of inflate() does not provide both available input and available
+ output space, it is possible that there will be no progress made. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ To assist in this, on return inflate() always sets strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all of the uncompressed data for the
+ operation to complete. (The size of the uncompressed data may have been
+ saved by the compressor for this purpose.) The use of Z_FINISH is not
+ required to perform an inflation in one step. However it may be used to
+ inform inflate that a faster approach can be used for the single inflate()
+ call. Z_FINISH also informs inflate to not maintain a sliding window if the
+ stream completes, which reduces inflate's memory footprint. If the stream
+ does not complete, either because not all of the stream is provided or not
+ enough output space is provided, then a sliding window will be allocated and
+ inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+ been used.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the effects of the flush parameter in this implementation are
+ on the return value of inflate() as noted below, when inflate() returns early
+ when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+ memory for a sliding window when Z_FINISH is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the Adler-32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed Adler-32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained unless inflateGetHeader() is used. When processing
+ gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+ produced so far. The CRC-32 is checked against the gzip trailer, as is the
+ uncompressed length, modulo 2^32.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value, in which case strm->msg points to a string with a more specific
+ error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL, or the state was inadvertently written over
+ by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+ if no progress was possible or if there was not enough room in the output
+ buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is to be attempted.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+ was inconsistent.
+*/
+
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ For the current implementation of deflate(), a windowBits value of 8 (a
+ window size of 256 bytes) is not supported. As a result, a request for 8
+ will result in 9 (a 512-byte window). In that case, providing 8 to
+ inflateInit2() will result in an error when the zlib header with 9 is
+ checked against the initialization of inflate(). The remedy is to not use 8
+ with deflateInit2() with this initialization, or at least in that case use 9
+ with inflateInit2().
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute a check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to the appropriate value,
+ if the operating system was determined at compile time. If a gzip stream is
+ being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+ For raw deflate or gzip encoding, a request for a 256-byte window is
+ rejected as invalid, since only the zlib header provides a means of
+ transmitting the window size to the decompressor.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. When using the zlib format, this
+ function must be called immediately after deflateInit, deflateInit2 or
+ deflateReset, and before any call of deflate. When doing raw deflate, this
+ function must be called either before any call of deflate, or immediately
+ after the completion of a deflate block, i.e. after all input has been
+ consumed and all output has been delivered when using any of the flush
+ options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
+ compressor and decompressor must use exactly the same dictionary (see
+ inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
+
+ Upon return of this function, strm->adler is set to the Adler-32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler-32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.) If a raw deflate was requested, then the
+ Adler-32 value is not computed and strm->adler is not set.
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if not at a block boundary for raw deflate). deflateSetDictionary does
+ not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by deflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If deflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ deflateGetDictionary() may return a length less than the window size, even
+ when more than the window size in input has been provided. It may return up
+ to 258 bytes less in that case, due to how zlib's implementation of deflate
+ manages the sliding window and lookahead for matches, where matches can be
+ up to 258 bytes long. If the application needs the last window-size bytes of
+ input, then that would need to be saved by the application outside of zlib.
+
+ deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit, but
+ does not free and reallocate the internal compression state. The stream
+ will leave the compression level and any other attributes that may have been
+ set unchanged.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2(). This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression approach (which is a function of the level) or the
+ strategy is changed, and if any input has been consumed in a previous
+ deflate() call, then the input available so far is compressed with the old
+ level and strategy using deflate(strm, Z_BLOCK). There are three approaches
+ for the compression levels 0, 1..3, and 4..9 respectively. The new level
+ and strategy will take effect at the next call of deflate().
+
+ If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+ not have enough output space to complete, then the parameter change will not
+ take effect. In this case, deflateParams() can be called again with the
+ same parameters and more output space to try again.
+
+ In order to assure a change in the parameters on the first try, the
+ deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+ request until strm.avail_out is not zero, before calling deflateParams().
+ Then no more input data should be provided before the deflateParams() call.
+ If this is done, the old level and strategy will be applied to the data
+ compressed before deflateParams(), and the new level and strategy will be
+ applied to the the data compressed after deflateParams().
+
+ deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+ state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+ there was not enough output space to complete the compression of the
+ available input data before a change in the strategy or approach. Note that
+ in the case of a Z_BUF_ERROR, the parameters are not changed. A return
+ value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+ retried with more output space.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate(). If that first deflate() call is provided the
+ sourceLen input bytes, an output buffer allocated to the size returned by
+ deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+ to return Z_STREAM_END. Note that it is possible for the compressed size to
+ be larger than the value returned by deflateBound() if flush options other
+ than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+ unsigned *pending,
+ int *bits));
+/*
+ deflatePending() returns the number of bytes and bits of output that have
+ been generated, but not yet provided in the available output. The bytes not
+ provided would be due to the available output space having being consumed.
+ The number of bits of output not provided are between 0 and 7, where they
+ await more bits to join them in order to fill out a full byte. If pending
+ or bits are Z_NULL, then those values are not set.
+
+ deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+ room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see
+ below), inflate() will not automatically decode concatenated gzip streams.
+ inflate() will return Z_STREAM_END at the end of the gzip stream. The state
+ would need to be reset to continue decoding a subsequent gzip stream.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the Adler-32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called at any
+ time to set the dictionary. If the provided dictionary is smaller than the
+ window and there is already data in the window, then the provided dictionary
+ will amend what's there. The application must insure that the dictionary
+ that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect Adler-32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by inflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If inflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a possible full flush point (see above
+ for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+ All full flush points have this pattern, but not all occurrences of this
+ pattern are full flush points.
+
+ inflateSync returns Z_OK if a possible full flush point has been found,
+ Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+ has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+ In the success case, the application may save the current current value of
+ total_in which indicates where valid compressed data was found. In the
+ error case, the application may repeatedly call inflateSync, providing more
+ input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
+
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2. If the window size is changed, then the
+ memory allocated for the window is freed, and the window will be reallocated
+ by inflate() if needed.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above, or -65536 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is potentially more efficient than
+ inflate() for file i/o applications, in that it avoids copying between the
+ output and the sliding window by simply making the window itself the output
+ buffer. inflate() can be faster on modern CPUs when used with large
+ buffers. inflateBack() trusts the application to not change the output
+ buffer passed by the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the default
+ behavior of inflate(), which expects a zlib header and trailer around the
+ deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero -- buf is ignored in that
+ case -- and inflateBack() will return a buffer error. inflateBack() will
+ call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+ out() should return zero on success, or non-zero on failure. If out()
+ returns non-zero, inflateBack() will return with an error. Neither in() nor
+ out() are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: ZLIB_DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed data. compress() is equivalent to compress2() with a level
+ parameter of Z_DEFAULT_COMPRESSION.
+
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed data.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed data.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
+ the case where there is not enough room, uncompress() will fill the output
+ buffer with the uncompressed data up to that point.
+*/
+
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong *sourceLen));
+/*
+ Same as uncompress, except that sourceLen is a pointer, where the
+ length of the source is *sourceLen. On return, *sourceLen is the number of
+ source bytes consumed.
+*/
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) 'T' will
+ request transparent writing or appending with no compression and not using
+ the gzip format.
+
+ "a" can be used instead of "w" to request that the gzip stream that will
+ be written be appended to the file. "+" will result in an error, since
+ reading and writing to the same gzip file is not supported. The addition of
+ "x" when writing will create the file exclusively, which fails if the file
+ already exists. On systems that support it, the addition of "e" when
+ reading or writing will set the flag to close the file on an execve() call.
+
+ These functions, as well as gzip, will read and decode a sequence of gzip
+ streams in a file. The append function of gzopen() can be used to create
+ such a file. (Also see gzflush() for another way to do this.) When
+ appending, gzopen does not test whether the file begins with a gzip stream,
+ nor does it look for the end of the gzip streams to begin appending. gzopen
+ will simply append a gzip stream to the existing file.
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression. When
+ reading, this will be detected automatically by looking for the magic two-
+ byte gzip header.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails. If you are using fileno() to get the
+ file descriptor from a FILE *, then you will have to use dup() to avoid
+ double-close()ing the file descriptor. Both gzclose() and fclose() will
+ close the associated file descriptor, so they need to have different file
+ descriptors.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Three times that size in buffer space is allocated. A larger buffer
+ size of, for example, 64K or 128K bytes will noticeably increase the speed
+ of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters. Previously provided
+ data is flushed before the parameter change.
+
+ gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+ opened for writing, Z_ERRNO if there is an error writing the flushed data,
+ or Z_MEM_ERROR if there is a memory allocation error.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file is not in gzip format, gzread copies the given number of
+ bytes into the buffer directly from the file.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream. Any number of gzip streams may be
+ concatenated in the input file, and will all be decompressed by gzread().
+ If something other than a gzip stream is encountered after a gzip stream,
+ that remaining trailing garbage is ignored (and no error is returned).
+
+ gzread can be used to read a gzip file that is being concurrently written.
+ Upon reaching the end of the input, gzread will return with the available
+ data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+ gzclearerr can be used to clear the end of file indicator in order to permit
+ gzread to be tried again. Z_OK indicates that a gzip stream was completed
+ on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
+ middle of a gzip stream. Note that gzread does not return -1 in the event
+ of an incomplete gzip stream. This error is deferred until gzclose(), which
+ will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+ stream. Alternatively, gzerror can be used before gzclose to detect this
+ case.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error. If len is too large to fit in an int,
+ then nothing is read, -1 is returned, and the error state is set to
+ Z_STREAM_ERROR.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+ gzFile file));
+/*
+ Read up to nitems items of size size from file to buf, otherwise operating
+ as gzread() does. This duplicates the interface of stdio's fread(), with
+ size_t request and return types. If the library defines size_t, then
+ z_size_t is identical to size_t. If not, then z_size_t is an unsigned
+ integer type that can contain a pointer.
+
+ gzfread() returns the number of full items read of size size, or zero if
+ the end of the file was reached and a full item could not be read, or if
+ there was an error. gzerror() must be consulted if zero is returned in
+ order to determine if there was an error. If the multiplication of size and
+ nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+ is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+ In the event that the end of file is reached and only a partial item is
+ available at the end, i.e. the remaining uncompressed data length is not a
+ multiple of size, then the final partial item is nevetheless read into buf
+ and the end-of-file flag is set. The length of the partial item read is not
+ provided, but could be inferred from the result of gztell(). This behavior
+ is the same as the behavior of fread() implementations in common libraries,
+ but it prevents the direct use of gzfread() to read a concurrently written
+ file, reseting and retrying on end-of-file, when size is not 1.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+ z_size_t nitems, gzFile file));
+/*
+ gzfwrite() writes nitems items of size size from buf to file, duplicating
+ the interface of stdio's fwrite(), with size_t request and return types. If
+ the library defines size_t, then z_size_t is identical to size_t. If not,
+ then z_size_t is an unsigned integer type that can contain a pointer.
+
+ gzfwrite() returns the number of full items written of size size, or zero
+ if there was an error. If the multiplication of size and nitems overflows,
+ i.e. the product does not fit in a z_size_t, then nothing is written, zero
+ is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or a negative zlib error code in case
+ of error. The number of uncompressed bytes written is limited to 8191, or
+ one less than the buffer size given to gzbuffer(). The caller should assure
+ that this limit is not exceeded. If it is exceeded, then gzprintf() will
+ return an error (0) with nothing written. In this case, there may also be a
+ buffer overflow with unpredictable consequences, which is possible only if
+ zlib was compiled with the insecure functions sprintf() or vsprintf()
+ because the secure snprintf() or vsnprintf() functions were not available.
+ This can be determined using zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error. This is implemented as a macro for speed.
+ As such, it does not do all of the checking the other functions do. I.e.
+ it does not check to see if file is NULL, nor whether the structure file
+ points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatenated gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+
+ When writing, gzdirect() returns true (1) if transparent writing was
+ requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
+ gzdirect() is not needed when writing. Transparent writing must be
+ explicitly requested, so the application already knows the answer. When
+ linking statically, using gzdirect() will include all of the zlib code for
+ gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+ last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the compression
+ library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+ much faster.
+
+ Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+ z_size_t len));
+/*
+ Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
+ that the z_off_t type (like off_t) is a signed integer. If len2 is
+ negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
+
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+ z_size_t len));
+/*
+ Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#ifdef Z_PREFIX_SET
+# define z_deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+# define z_inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+# define z_inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+# define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+# define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+# define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+# define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+# define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure. Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro. The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously. They can
+ * only be used by the gzgetc() macro. You have been warned.
+ */
+struct gzFile_s {
+ unsigned have;
+ unsigned char *next;
+ z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+# define z_gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#else
+# define gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+# ifdef Z_PREFIX_SET
+# define z_gzopen z_gzopen64
+# define z_gzseek z_gzseek64
+# define z_gztell z_gztell64
+# define z_gzoffset z_gzoffset64
+# define z_adler32_combine z_adler32_combine64
+# define z_crc32_combine z_crc32_combine64
+# else
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# endif
+# ifndef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long ZEXPORT inflateCodesUsed OF ((z_streamp));
+ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
+ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
+ const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ const char *format,
+ va_list va));
+# endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
diff --git a/lib/zlib/zlib.mk b/lib/zlib/zlib.mk
new file mode 100644
index 0000000..98d4efa
--- /dev/null
+++ b/lib/zlib/zlib.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+ZLIB_PATH := lib/zlib
+
+# Imported from zlib 1.2.11 (do not modify them)
+ZLIB_SOURCES := $(addprefix $(ZLIB_PATH)/, \
+ adler32.c \
+ crc32.c \
+ inffast.c \
+ inflate.c \
+ inftrees.c \
+ zutil.c)
+
+# Implemented for TF
+ZLIB_SOURCES += $(addprefix $(ZLIB_PATH)/, \
+ tf_gunzip.c)
+
+INCLUDES += -Iinclude/lib/zlib
+
+# REVISIT: the following flags need not be given globally
+TF_CFLAGS += -DZ_SOLO -DDEF_WBITS=31
diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c
new file mode 100644
index 0000000..a76c6b0
--- /dev/null
+++ b/lib/zlib/zutil.c
@@ -0,0 +1,325 @@
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2017 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+#ifndef Z_SOLO
+# include "gzguts.h"
+#endif
+
+z_const char * const z_errmsg[10] = {
+ (z_const char *)"need dictionary", /* Z_NEED_DICT 2 */
+ (z_const char *)"stream end", /* Z_STREAM_END 1 */
+ (z_const char *)"", /* Z_OK 0 */
+ (z_const char *)"file error", /* Z_ERRNO (-1) */
+ (z_const char *)"stream error", /* Z_STREAM_ERROR (-2) */
+ (z_const char *)"data error", /* Z_DATA_ERROR (-3) */
+ (z_const char *)"insufficient memory", /* Z_MEM_ERROR (-4) */
+ (z_const char *)"buffer error", /* Z_BUF_ERROR (-5) */
+ (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+ (z_const char *)""
+};
+
+
+const char * ZEXPORT zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+ uLong flags;
+
+ flags = 0;
+ switch ((int)(sizeof(uInt))) {
+ case 2: break;
+ case 4: flags += 1; break;
+ case 8: flags += 2; break;
+ default: flags += 3;
+ }
+ switch ((int)(sizeof(uLong))) {
+ case 2: break;
+ case 4: flags += 1 << 2; break;
+ case 8: flags += 2 << 2; break;
+ default: flags += 3 << 2;
+ }
+ switch ((int)(sizeof(voidpf))) {
+ case 2: break;
+ case 4: flags += 1 << 4; break;
+ case 8: flags += 2 << 4; break;
+ default: flags += 3 << 4;
+ }
+ switch ((int)(sizeof(z_off_t))) {
+ case 2: break;
+ case 4: flags += 1 << 6; break;
+ case 8: flags += 2 << 6; break;
+ default: flags += 3 << 6;
+ }
+#ifdef ZLIB_DEBUG
+ flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+ flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+ flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+ flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+ flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+ flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+ flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+ flags += 1L << 20;
+#endif
+#ifdef FASTEST
+ flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifdef NO_vsnprintf
+ flags += 1L << 25;
+# ifdef HAS_vsprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_vsnprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#else
+ flags += 1L << 24;
+# ifdef NO_snprintf
+ flags += 1L << 25;
+# ifdef HAS_sprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_snprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#endif
+ return flags;
+}
+
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
+# ifndef verbose
+# define verbose 0
+# endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (m)
+ char *m;
+{
+ fprintf(stderr, "%s\n", m);
+ exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+ int err;
+{
+ return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
+ int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
+ Bytef* dest;
+ const Bytef* source;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = *source++; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
+ const Bytef* s1;
+ const Bytef* s2;
+ uInt len;
+{
+ uInt j;
+
+ for (j = 0; j < len; j++) {
+ if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+ }
+ return 0;
+}
+
+void ZLIB_INTERNAL zmemzero(dest, len)
+ Bytef* dest;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = 0; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+#endif
+
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+ voidpf org_ptr;
+ voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ voidpf buf;
+ ulg bsize = (ulg)items*size;
+
+ (void)opaque;
+
+ /* If we allocate less than 65520 bytes, we assume that farmalloc
+ * will return a usable pointer which doesn't have to be normalized.
+ */
+ if (bsize < 65520L) {
+ buf = farmalloc(bsize);
+ if (*(ush*)&buf != 0) return buf;
+ } else {
+ buf = farmalloc(bsize + 16L);
+ }
+ if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+ table[next_ptr].org_ptr = buf;
+
+ /* Normalize the pointer to seg:0 */
+ *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+ *(ush*)&buf = 0;
+ table[next_ptr++].new_ptr = buf;
+ return buf;
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ int n;
+
+ (void)opaque;
+
+ if (*(ush*)&ptr != 0) { /* object < 64K */
+ farfree(ptr);
+ return;
+ }
+ /* Find the original pointer */
+ for (n = 0; n < next_ptr; n++) {
+ if (ptr != table[n].new_ptr) continue;
+
+ farfree(table[n].org_ptr);
+ while (++n < next_ptr) {
+ table[n-1] = table[n];
+ }
+ next_ptr--;
+ return;
+ }
+ Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+# define _halloc halloc
+# define _hfree hfree
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+{
+ (void)opaque;
+ return _halloc((long)items, size);
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ (void)opaque;
+ _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp malloc OF((uInt size));
+extern voidp calloc OF((uInt items, uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+ voidpf opaque;
+ unsigned items;
+ unsigned size;
+{
+ (void)opaque;
+ return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+ (voidpf)calloc(items, size);
+}
+
+void ZLIB_INTERNAL zcfree (opaque, ptr)
+ voidpf opaque;
+ voidpf ptr;
+{
+ (void)opaque;
+ free(ptr);
+}
+
+#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h
new file mode 100644
index 0000000..b079ea6
--- /dev/null
+++ b/lib/zlib/zutil.h
@@ -0,0 +1,271 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
+#include "zlib.h"
+
+#if defined(STDC) && !defined(Z_SOLO)
+# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+# include <stddef.h>
+# endif
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef Z_SOLO
+ typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+ define "local" for the non-static meaning of "static", for readability
+ (compile with -Dlocal if your debugger can't find static symbols) */
+
+typedef unsigned char uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long ulg;
+
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+ return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+ /* common constants */
+
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+ /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+# define OS_CODE 0x00
+# ifndef Z_SOLO
+# if defined(__TURBOC__) || defined(__BORLANDC__)
+# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+ /* Allow compilation with ANSI keywords only enabled */
+ void _Cdecl farfree( void *block );
+ void *_Cdecl farmalloc( unsigned long nbytes );
+# else
+# include <alloc.h>
+# endif
+# else /* MSC or DJGPP */
+# include <malloc.h>
+# endif
+# endif
+#endif
+
+#ifdef AMIGA
+# define OS_CODE 1
+#endif
+
+#if defined(VAXC) || defined(VMS)
+# define OS_CODE 2
+# define F_OPEN(name, mode) \
+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#ifdef __370__
+# if __TARGET_LIB__ < 0x20000000
+# define OS_CODE 4
+# elif __TARGET_LIB__ < 0x40000000
+# define OS_CODE 11
+# else
+# define OS_CODE 8
+# endif
+#endif
+
+#if defined(ATARI) || defined(atarist)
+# define OS_CODE 5
+#endif
+
+#ifdef OS2
+# define OS_CODE 6
+# if defined(M_I86) && !defined(Z_SOLO)
+# include <malloc.h>
+# endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+# define OS_CODE 7
+# ifndef Z_SOLO
+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fdopen */
+# else
+# ifndef fdopen
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __acorn
+# define OS_CODE 13
+#endif
+
+#if defined(WIN32) && !defined(__CYGWIN__)
+# define OS_CODE 10
+#endif
+
+#ifdef _BEOS_
+# define OS_CODE 16
+#endif
+
+#ifdef __TOS_OS400__
+# define OS_CODE 18
+#endif
+
+#ifdef __APPLE__
+# define OS_CODE 19
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+# if defined(_WIN32_WCE)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# ifndef _PTRDIFF_T_DEFINED
+ typedef int ptrdiff_t;
+# define _PTRDIFF_T_DEFINED
+# endif
+# else
+# define fdopen(fd,type) _fdopen(fd,type)
+# endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+ #pragma warn -8004
+ #pragma warn -8008
+ #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+ /* common defaults */
+
+#ifndef OS_CODE
+# define OS_CODE 3 /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+# define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+ /* functions */
+
+#if defined(pyr) || defined(Z_SOLO)
+# define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+ * You may have to use the same strategy for Borland C (untested).
+ * The __SC__ check is for Symantec.
+ */
+# define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+# define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+# define zmemcpy _fmemcpy
+# define zmemcmp _fmemcmp
+# define zmemzero(dest, len) _fmemset(dest, 0, len)
+# else
+# define zmemcpy memcpy
+# define zmemcmp memcmp
+# define zmemzero(dest, len) memset(dest, 0, len)
+# endif
+#else
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef ZLIB_DEBUG
+# include <stdio.h>
+ extern int ZLIB_INTERNAL z_verbose;
+ extern void ZLIB_INTERNAL z_error OF((char *m));
+# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+# define Trace(x) {if (z_verbose>=0) fprintf x ;}
+# define Tracev(x) {if (z_verbose>0) fprintf x ;}
+# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+#ifndef Z_SOLO
+ voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+ unsigned size));
+ void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
+#endif
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */
diff --git a/maintainers.rst b/maintainers.rst
index 04ab695..72a11a5 100644
--- a/maintainers.rst
+++ b/maintainers.rst
@@ -43,8 +43,8 @@
- services/spd/trusty/\*
- plat/nvidia/\*
-eMMC/UFS drivers and HiSilicon platform sub-maintainer
-------------------------------------------------------
+eMMC/UFS drivers and HiSilicon HiKey and HiKey960 platform sub-maintainer
+-------------------------------------------------------------------------
Haojian Zhuang (haojian.zhuang@linaro.org, `hzhuang1`_)
@@ -52,7 +52,6 @@
- docs/plat/hikey.rst
- docs/plat/hikey960.rst
-- docs/plat/poplar.rst
- drivers/emmc/\*
- drivers/partition/\*
- drivers/synopsys/emmc/\*
@@ -62,7 +61,18 @@
- include/drivers/emmc.h
- include/drivers/ufs.h
- include/drivers/synopsys/dw\_mmc.h
-- plat/hisilicon/\*
+- plat/hisilicon/hikey/\*
+- plat/hisilicon/hikey960/\*
+
+HiSilicon Poplar platform sub-maintainer
+----------------------------------------
+
+Shawn Guo (shawn.guo@linaro.org, `shawnguo2`_)
+
+Files:
+
+- docs/plat/poplar.rst
+- plat/hisilicon/poplar/\*
MediaTek platform sub-maintainer
--------------------------------
@@ -124,6 +134,7 @@
.. _jenswi-linaro: https://github.com/jenswi-linaro
.. _vwadekar: https://github.com/vwadekar
.. _hzhuang1: https://github.com/hzhuang1
+.. _shawnguo2: https://github.com/shawnguo2
.. _masahir0y: https://github.com/masahir0y
.. _mtk09422: https://github.com/mtk09422
.. _TonyXie06: https://github.com/TonyXie06
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index a4fbc5a..0d2cf10 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -98,75 +98,90 @@
${BUILD_PLAT}/bl$(1).bin
endef
-# FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
-# to package a new payload. Optionally, it adds the dependency on this payload
+# TOOL_ADD_PAYLOAD appends the command line arguments required by fiptool to
+# package a new payload and/or by cert_create to generate certificate.
+# Optionally, it adds the dependency on this payload
# $(1) = payload filename (i.e. bl31.bin)
# $(2) = command line option for the specified payload (i.e. --soc-fw)
-# $(3) = fip target dependency (optional) (i.e. bl31)
-define FIP_ADD_PAYLOAD
- $(eval FIP_ARGS += $(2) $(1))
- $(eval $(if $(3),FIP_DEPS += $(3)))
+# $(3) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
+# $(4) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
+define TOOL_ADD_PAYLOAD
+ $(4)FIP_ARGS += $(2) $(1)
+ $(if $(3),$(4)FIP_DEPS += $(3))
+ $(4)CRT_ARGS += $(2) $(1)
+ $(if $(3),$(4)CRT_DEPS += $(3))
endef
+# TOOL_ADD_IMG_PAYLOAD works like TOOL_ADD_PAYLOAD, but applies image filters
+# before passing them to host tools if BL*_PRE_TOOL_FILTER is defined.
+# $(1) = image_type (scp_bl2, bl33, etc.)
+# $(2) = payload filepath (ex. build/fvp/release/bl31.bin)
+# $(3) = command line option for the specified payload (ex. --soc-fw)
+# $(4) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
+# $(5) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
+
+define TOOL_ADD_IMG_PAYLOAD
+
+$(eval PRE_TOOL_FILTER := $($(call uppercase,$(1))_PRE_TOOL_FILTER))
+
+ifneq ($(PRE_TOOL_FILTER),)
+
+$(eval PROCESSED_PATH := $(BUILD_PLAT)/$(1).bin$($(PRE_TOOL_FILTER)_SUFFIX))
+
+$(call $(PRE_TOOL_FILTER)_RULE,$(PROCESSED_PATH),$(2))
+
+$(PROCESSED_PATH): $(4)
+
+$(call TOOL_ADD_PAYLOAD,$(PROCESSED_PATH),$(3),$(PROCESSED_PATH),$(5))
+
+else
+$(call TOOL_ADD_PAYLOAD,$(2),$(3),$(4),$(5))
+endif
+endef
+
# CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
# $(1) = parameter filename
# $(2) = cert_create command line option for the specified parameter
-# $(3) = input parameter (false if empty)
+# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
define CERT_ADD_CMD_OPT
- $(eval $(if $(3),CRT_DEPS += $(1)))
- $(eval CRT_ARGS += $(2) $(1))
+ $(3)CRT_ARGS += $(2) $(1)
endef
-# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP
-# using a build option. It also adds a dependency on the image file, aborting
-# the build if the file does not exist.
-# $(1) = build option to specify the image filename (SCP_BL2, BL33, etc)
+# TOOL_ADD_IMG allows the platform to specify an external image to be packed
+# in the FIP and/or for which certificate is generated. It also adds a
+# dependency on the image file, aborting the build if the file does not exist.
+# $(1) = image_type (scp_bl2, bl33, etc.)
# $(2) = command line option for fiptool (--scp-fw, --nt-fw, etc)
+# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
# Example:
-# $(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
-define FIP_ADD_IMG
- CRT_DEPS += check_$(1)
- FIP_DEPS += check_$(1)
- $(call FIP_ADD_PAYLOAD,$(value $(1)),$(2))
+# $(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
+define TOOL_ADD_IMG
+ # Build option to specify the image filename (SCP_BL2, BL33, etc)
+ # This is the uppercase form of the first parameter
+ $(eval _V := $(call uppercase,$(1)))
+
+ $(3)CRT_DEPS += check_$(1)
+ $(3)FIP_DEPS += check_$(1)
+ $(call TOOL_ADD_IMG_PAYLOAD,$(1),$(value $(_V)),$(2),,$(3))
.PHONY: check_$(1)
check_$(1):
- $$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
+ $$(if $(value $(_V)),,$$(error "Platform '${PLAT}' requires $(_V). Please set $(_V) to point to the right file"))
+ $$(if $(wildcard $(value $(_V))),,$$(error '$(_V)=$(value $(_V))' was specified, but '$(value $(_V))' does not exist))
endef
-# FWU_FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
-# to package a new FWU payload. Optionally, it adds the dependency on this payload
-# $(1) = payload filename (e.g. ns_bl2u.bin)
-# $(2) = command line option for the specified payload (e.g. --fwu)
-# $(3) = fip target dependency (optional) (e.g. ns_bl2u)
-define FWU_FIP_ADD_PAYLOAD
- $(eval $(if $(3),FWU_FIP_DEPS += $(3)))
- $(eval FWU_FIP_ARGS += $(2) $(1))
-endef
+################################################################################
+# Generic image processing filters
+################################################################################
-# FWU_CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
-# $(1) = parameter filename
-# $(2) = cert_create command line option for the specified parameter
-# $(3) = input parameter (false if empty)
-define FWU_CERT_ADD_CMD_OPT
- $(eval $(if $(3),FWU_CRT_DEPS += $(1)))
- $(eval FWU_CRT_ARGS += $(2) $(1))
+# GZIP
+define GZIP_RULE
+$(1): $(2)
+ @echo " GZIP $$@"
+ $(Q)gzip -n -f -9 $$< --stdout > $$@
endef
-# FWU_FIP_ADD_IMG allows the platform to pack a binary image in the FWU FIP
-# $(1) build option to specify the image filename (BL2U, NS_BL2U, etc)
-# $(2) command line option for fiptool (--ap-fwu-cfg, --fwu, etc)
-# Example:
-# $(eval $(call FWU_FIP_ADD_IMG,BL2U,--ap-fwu-cfg))
-define FWU_FIP_ADD_IMG
- FWU_CRT_DEPS += check_$(1)
- FWU_FIP_DEPS += check_$(1)
- $(call FWU_FIP_ADD_PAYLOAD,$(value $(1)),$(2))
-
-.PHONY: check_$(1)
-check_$(1):
- $$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
-endef
+GZIP_SUFFIX := .gz
################################################################################
# Auxiliary macros to build TF images from sources
@@ -254,16 +269,6 @@
$(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
endef
-
-# MAKE_TOOL_ARGS macro defines the command line arguments for fiptool for
-# each BL image. Arguments:
-# $(1) = BL stage (2, 30, 31, 32, 33)
-# $(2) = Binary file
-# $(3) = FIP command line option (if empty, image will not be included in the FIP)
-define MAKE_TOOL_ARGS
- $(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--$(3),bl$(1))))
-endef
-
# Allow overriding the timestamp, for example for reproducible builds, or to
# synchronize timestamps across multiple projects.
# This must be set to a C string (including quotes where applicable).
@@ -273,6 +278,7 @@
# Arguments:
# $(1) = BL stage (2, 2u, 30, 31, 32, 33)
# $(2) = FIP command line option (if empty, image will not be included in the FIP)
+# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
define MAKE_BL
$(eval BUILD_DIR := ${BUILD_PLAT}/bl$(1))
$(eval BL_SOURCES := $(BL$(call uppercase,$(1))_SOURCES))
@@ -334,7 +340,7 @@
all: bl$(1)
-$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2)))
+$(if $(2),$(call TOOL_ADD_IMG_PAYLOAD,bl$(1),$(BIN),--$(2),$(BIN),$(3)))
endef
diff --git a/make_helpers/tbbr/tbbr_tools.mk b/make_helpers/tbbr/tbbr_tools.mk
index cda8d72..afc007a 100644
--- a/make_helpers/tbbr/tbbr_tools.mk
+++ b/make_helpers/tbbr/tbbr_tools.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -43,12 +43,10 @@
$(eval $(call CERT_ADD_CMD_OPT,${NTFW_NVCTR_VAL},--ntfw-nvctr))
# Add Trusted Key certificate to the fiptool and cert_create command line options
-$(eval $(call FIP_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
-$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_KEY_CERT},--trusted-key-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
# Add fwu certificate to the fiptool and cert_create command line options
-$(eval $(call FWU_FIP_ADD_PAYLOAD,${FWU_CERT},--fwu-cert))
-$(eval $(call FWU_CERT_ADD_CMD_OPT,${FWU_CERT},--fwu-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${FWU_CERT},--fwu-cert,,FWU_))
# Add the keys to the cert_create command line options (private keys are NOT
# packed in the FIP). Developers can use their own keys by specifying the proper
@@ -56,78 +54,42 @@
$(if ${KEY_ALG},$(eval $(call CERT_ADD_CMD_OPT,${KEY_ALG},--key-alg)))
$(if ${HASH_ALG},$(eval $(call CERT_ADD_CMD_OPT,${HASH_ALG},--hash-alg)))
$(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
-$(if ${ROT_KEY},$(eval $(call FWU_CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
+$(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key,FWU_)))
$(if ${TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_WORLD_KEY},--trusted-world-key)))
$(if ${NON_TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${NON_TRUSTED_WORLD_KEY},--non-trusted-world-key)))
-# Add the BL2 CoT (image cert + image)
-$(if ${BL2},$(eval $(call CERT_ADD_CMD_OPT,${BL2},--tb-fw,true)),\
- $(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,2),--tb-fw,true)))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+
+# Add the BL2 CoT (image cert)
ifeq (${BL2_AT_EL3}, 0)
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
endif
-# Add the SCP_BL2 CoT (key cert + img cert + image)
+# Add the SCP_BL2 CoT (key cert + img cert)
ifneq (${SCP_BL2},)
- $(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2},--scp-fw,true))
$(if ${SCP_BL2_KEY},$(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2_KEY},--scp-fw-key)))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
endif
ifeq (${ARCH},aarch64)
ifeq (${NEED_BL31},yes)
-# Add the BL31 CoT (key cert + img cert + image)
-$(if ${BL31},$(eval $(call CERT_ADD_CMD_OPT,${BL31},--soc-fw,true)),\
- $(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,31),--soc-fw,true)))
+# Add the BL31 CoT (key cert + img cert)
$(if ${BL31_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL31_KEY},--soc-fw-key)))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
endif
endif
-# Add the BL32 CoT (key cert + img cert + image)
+# Add the BL32 CoT (key cert + img cert)
ifeq (${NEED_BL32},yes)
- $(if ${BL32},$(eval $(call CERT_ADD_CMD_OPT,${BL32},--tos-fw,true)),\
- $(if ${BL32_SOURCES},$(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,32),--tos-fw,true))))
$(if ${BL32_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL32_KEY},--tos-fw-key)))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
-ifneq (${BL32_EXTRA1},)
- $(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA1},--tos-fw-extra1,true))
-endif
-ifneq (${BL32_EXTRA2},)
- $(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA2},--tos-fw-extra2,true))
-endif
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
endif
-# Add the BL33 CoT (key cert + img cert + image)
+# Add the BL33 CoT (key cert + img cert)
ifneq (${BL33},)
- $(eval $(call CERT_ADD_CMD_OPT,${BL33},--nt-fw,true))
$(if ${BL33_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL33_KEY},--nt-fw-key)))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
- $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
- $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
-endif
-
-# Add the BL2U image
-$(if ${BL2U},$(eval $(call FWU_CERT_ADD_CMD_OPT,${BL2U},--ap-fwu-cfg,true)),\
- $(eval $(call FWU_CERT_ADD_CMD_OPT,$(call IMG_BIN,2u),--ap-fwu-cfg,true)))
-
-# Add the SCP_BL2U image
-ifneq (${SCP_BL2U},)
- $(eval $(call FWU_CERT_ADD_CMD_OPT,${SCP_BL2U},--scp-fwu-cfg,true))
-endif
-
-# Add the NS_BL2U image
-ifneq (${NS_BL2U},)
- $(eval $(call FWU_CERT_ADD_CMD_OPT,${NS_BL2U},--fwu,true))
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
+ $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
endif
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index e6ce18a..48e7071 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -87,10 +87,10 @@
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
endif
# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
@@ -211,7 +211,7 @@
BL2_SOURCES += ${AUTH_SOURCES} \
plat/common/tbbr/plat_tbbr.c
- $(eval $(call FWU_FIP_ADD_IMG,NS_BL2U,--fwu))
+ $(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
# We expect to locate the *.mk files under the directories specified below
ifeq (${ARM_CRYPTOCELL_INTEG},0)
diff --git a/plat/arm/css/common/css_common.mk b/plat/arm/css/common/css_common.mk
index 63e3059..cfbb3e9 100644
--- a/plat/arm/css/common/css_common.mk
+++ b/plat/arm/css/common/css_common.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -49,7 +49,7 @@
ifeq (${CSS_LOAD_SCP_IMAGES},1)
NEED_SCP_BL2 := yes
ifneq (${TRUSTED_BOARD_BOOT},0)
- $(eval $(call FWU_FIP_ADD_IMG,SCP_BL2U,--scp-fwu-cfg))
+ $(eval $(call TOOL_ADD_IMG,scp_bl2u,--scp-fwu-cfg,FWU_))
endif
ifeq (${CSS_USE_SCMI_SDS_DRIVER},1)
diff --git a/plat/common/aarch32/platform_helpers.S b/plat/common/aarch32/platform_helpers.S
index 0a0e927..d618539 100644
--- a/plat/common/aarch32/platform_helpers.S
+++ b/plat/common/aarch32/platform_helpers.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -15,10 +15,7 @@
.weak plat_disable_acp
.weak bl1_plat_prepare_exit
.weak platform_mem_init
- .weak plat_error_handler
.weak plat_panic_handler
- .weak bl2_plat_preload_setup
- .weak plat_try_next_boot_source
/* -----------------------------------------------------
* Placeholder function which should be redefined by
@@ -95,16 +92,6 @@
endfunc bl1_plat_prepare_exit
/* -----------------------------------------------------
- * void plat_error_handler(int err) __dead2;
- * Endless loop by default.
- * -----------------------------------------------------
- */
-func plat_error_handler
- wfi
- b plat_error_handler
-endfunc plat_error_handler
-
- /* -----------------------------------------------------
* void plat_panic_handler(void) __dead2;
* Endless loop by default.
* -----------------------------------------------------
@@ -112,23 +99,3 @@
func plat_panic_handler
b plat_panic_handler
endfunc plat_panic_handler
-
-
- /* -----------------------------------------------------
- * Placeholder function which should be redefined by
- * each platfrom.
- * -----------------------------------------------------
- */
-func bl2_plat_preload_setup
- bx lr
-endfunc bl2_plat_preload_setup
-
- /* -----------------------------------------------------
- * Placeholder function which should be redefined by
- * each platfrom.
- * -----------------------------------------------------
- */
-func plat_try_next_boot_source
- mov r0, #0
- bx lr
-endfunc plat_try_next_boot_source
diff --git a/plat/common/aarch64/platform_helpers.S b/plat/common/aarch64/platform_helpers.S
index 8526752..033a12f 100644
--- a/plat/common/aarch64/platform_helpers.S
+++ b/plat/common/aarch64/platform_helpers.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -16,10 +16,7 @@
.weak plat_reset_handler
.weak plat_disable_acp
.weak bl1_plat_prepare_exit
- .weak plat_error_handler
.weak plat_panic_handler
- .weak bl2_plat_preload_setup
- .weak plat_try_next_boot_source
#if !ENABLE_PLAT_COMPAT
.globl platform_get_core_pos
@@ -159,16 +156,6 @@
endfunc bl1_plat_prepare_exit
/* -----------------------------------------------------
- * void plat_error_handler(int err) __dead2;
- * Endless loop by default.
- * -----------------------------------------------------
- */
-func plat_error_handler
- wfi
- b plat_error_handler
-endfunc plat_error_handler
-
- /* -----------------------------------------------------
* void plat_panic_handler(void) __dead2;
* Endless loop by default.
* -----------------------------------------------------
@@ -177,22 +164,3 @@
wfi
b plat_panic_handler
endfunc plat_panic_handler
-
- /* -----------------------------------------------------
- * Placeholder function which should be redefined by
- * each platfrom.
- * -----------------------------------------------------
- */
-func bl2_plat_preload_setup
- ret
-endfunc bl2_plat_preload_setup
-
- /* -----------------------------------------------------
- * Placeholder function which should be redefined by
- * each platfrom.
- * -----------------------------------------------------
- */
-func plat_try_next_boot_source
- mov x0, #0
- ret
-endfunc plat_try_next_boot_source
diff --git a/plat/common/platform_helpers_default.c b/plat/common/platform_helpers_default.c
new file mode 100644
index 0000000..ce1a731
--- /dev/null
+++ b/plat/common/platform_helpers_default.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <platform.h>
+
+/*
+ * Placeholder functions which can be redefined by each platfrom.
+ */
+
+#pragma weak plat_error_handler
+#pragma weak bl1_plat_handle_pre_image_load
+#pragma weak bl1_plat_handle_post_image_load
+#pragma weak bl2_plat_preload_setup
+#pragma weak bl2_plat_handle_pre_image_load
+#pragma weak bl2_plat_handle_post_image_load
+#pragma weak plat_try_next_boot_source
+
+void __dead2 plat_error_handler(int err)
+{
+ while (1)
+ wfi();
+}
+
+int bl1_plat_handle_pre_image_load(void)
+{
+ return 0;
+}
+
+int bl1_plat_handle_post_image_load(void)
+{
+ return 0;
+}
+
+void bl2_plat_preload_setup(void)
+{
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+ return 0;
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return 0;
+}
+
+int plat_try_next_boot_source(void)
+{
+ return 0;
+}
diff --git a/plat/hisilicon/hikey/platform.mk b/plat/hisilicon/hikey/platform.mk
index b11d208..3662914 100644
--- a/plat/hisilicon/hikey/platform.mk
+++ b/plat/hisilicon/hikey/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -9,11 +9,11 @@
# On Hikey, the TSP can execute from TZC secure area in DRAM (default)
# or SRAM.
-HIKEY_TSP_RAM_LOCATION := dram
+HIKEY_TSP_RAM_LOCATION ?= dram
ifeq (${HIKEY_TSP_RAM_LOCATION}, dram)
HIKEY_TSP_RAM_LOCATION_ID = HIKEY_DRAM_ID
else ifeq (${HIKEY_TSP_RAM_LOCATION}, sram)
- HIKEY_TSP_RAM_LOCATION_ID := HIKEY_SRAM_ID
+ HIKEY_TSP_RAM_LOCATION_ID = HIKEY_SRAM_ID
else
$(error "Currently unsupported HIKEY_TSP_RAM_LOCATION value")
endif
@@ -36,10 +36,10 @@
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
endif
ENABLE_PLAT_COMPAT := 0
diff --git a/plat/hisilicon/hikey960/platform.mk b/plat/hisilicon/hikey960/platform.mk
index cb97deb..ffe1073 100644
--- a/plat/hisilicon/hikey960/platform.mk
+++ b/plat/hisilicon/hikey960/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -8,11 +8,11 @@
LOAD_IMAGE_V2 := 1
# On Hikey960, the TSP can execute from TZC secure area in DRAM.
-HIKEY960_TSP_RAM_LOCATION := dram
+HIKEY960_TSP_RAM_LOCATION ?= dram
ifeq (${HIKEY960_TSP_RAM_LOCATION}, dram)
HIKEY960_TSP_RAM_LOCATION_ID = HIKEY960_DRAM_ID
else ifeq (${HIKEY960_TSP_RAM_LOCATION}, sram)
- HIKEY960_TSP_RAM_LOCATION_ID := HIKEY960_SRAM_ID
+ HIKEY960_TSP_RAM_LOCATION_ID = HIKEY960_SRAM_ID
else
$(error "Currently unsupported HIKEY960_TSP_RAM_LOCATION value")
endif
@@ -29,10 +29,10 @@
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
endif
ENABLE_PLAT_COMPAT := 0
diff --git a/plat/hisilicon/poplar/aarch64/platform_common.c b/plat/hisilicon/poplar/aarch64/platform_common.c
index 762bd84..5498065 100644
--- a/plat/hisilicon/poplar/aarch64/platform_common.c
+++ b/plat/hisilicon/poplar/aarch64/platform_common.c
@@ -29,10 +29,24 @@
TSP_SEC_MEM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
+#if LOAD_IMAGE_V2
+#ifdef SPD_opteed
+#define MAP_OPTEE_PAGEABLE MAP_REGION_FLAT( \
+ POPLAR_OPTEE_PAGEABLE_LOAD_BASE, \
+ POPLAR_OPTEE_PAGEABLE_LOAD_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif
+#endif
+
static const mmap_region_t poplar_mmap[] = {
MAP_DDR,
MAP_DEVICE,
MAP_TSP_MEM,
+#if LOAD_IMAGE_V2
+#ifdef SPD_opteed
+ MAP_OPTEE_PAGEABLE,
+#endif
+#endif
{0}
};
diff --git a/plat/hisilicon/poplar/bl1_plat_setup.c b/plat/hisilicon/poplar/bl1_plat_setup.c
index 7d6f10c..3955113 100644
--- a/plat/hisilicon/poplar/bl1_plat_setup.c
+++ b/plat/hisilicon/poplar/bl1_plat_setup.c
@@ -38,23 +38,49 @@
return &bl1_tzram_layout;
}
+#if LOAD_IMAGE_V2
+/*******************************************************************************
+ * Function that takes a memory layout into which BL2 has been loaded and
+ * populates a new memory layout for BL2 that ensures that BL1's data sections
+ * resident in secure RAM are not visible to BL2.
+ ******************************************************************************/
+void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+ meminfo_t *bl2_mem_layout)
+{
+
+ assert(bl1_mem_layout != NULL);
+ assert(bl2_mem_layout != NULL);
+
+ /*
+ * Cannot use default weak implementation in bl1main.c because
+ * BL1 RW data is not at the top of bl1_mem_layout
+ */
+ bl2_mem_layout->total_base = BL2_BASE;
+ bl2_mem_layout->total_size = BL32_LIMIT - BL2_BASE;
+
+ flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
+}
+#endif /* LOAD_IMAGE_V2 */
+
void bl1_early_platform_setup(void)
{
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Allow BL1 to see the whole Trusted RAM */
- bl1_tzram_layout.total_base = BL_MEM_BASE;
- bl1_tzram_layout.total_size = BL_MEM_SIZE;
+ bl1_tzram_layout.total_base = BL1_RW_BASE;
+ bl1_tzram_layout.total_size = BL1_RW_SIZE;
+#if !LOAD_IMAGE_V2
/* Calculate how much RAM BL1 is using and how much remains free */
- bl1_tzram_layout.free_base = BL_MEM_BASE;
- bl1_tzram_layout.free_size = BL_MEM_SIZE;
+ bl1_tzram_layout.free_base = BL1_RW_BASE;
+ bl1_tzram_layout.free_size = BL1_RW_SIZE;
reserve_mem(&bl1_tzram_layout.free_base,
&bl1_tzram_layout.free_size,
BL1_RAM_BASE,
BL1_RAM_LIMIT - BL1_RAM_BASE);
+#endif
INFO("BL1: 0x%lx - 0x%lx [size = %zu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
BL1_RAM_LIMIT - BL1_RAM_BASE);
@@ -64,7 +90,7 @@
{
plat_configure_mmu_el3(bl1_tzram_layout.total_base,
bl1_tzram_layout.total_size,
- BL_MEM_BASE, /* l-loader and BL1 ROM */
+ BL1_RO_BASE, /* l-loader and BL1 ROM */
BL1_RO_LIMIT,
BL1_COHERENT_RAM_BASE,
BL1_COHERENT_RAM_LIMIT);
diff --git a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
new file mode 100644
index 0000000..c73ead8
--- /dev/null
+++ b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+ /* Fill SCP_BL2 related information if it exists */
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+#endif /* SCP_BL2_BASE */
+
+#ifdef EL3_PAYLOAD_BASE
+ /* Fill EL3 payload related information (BL31 is EL3 payload)*/
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+
+#else /* EL3_PAYLOAD_BASE */
+
+ /* Fill BL31 related information */
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+ .ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
+#endif
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+# ifdef BL32_BASE
+ .next_handoff_image_id = BL32_IMAGE_ID,
+# else
+ .next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+ },
+
+# ifdef BL32_BASE
+ /* Fill BL32 related information */
+ {
+ .image_id = BL32_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
+
+ /*
+ * Fill BL32 external 1 related information.
+ * A typical use for extra1 image is with OP-TEE where it is the pager image.
+ */
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+
+ /*
+ * Fill BL32 external 2 related information.
+ * A typical use for extra2 image is with OP-TEE where it is the paged image.
+ */
+ {
+ .image_id = BL32_EXTRA2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+#ifdef SPD_opteed
+ .image_info.image_base = POPLAR_OPTEE_PAGEABLE_LOAD_BASE,
+ .image_info.image_max_size = POPLAR_OPTEE_PAGEABLE_LOAD_SIZE,
+#endif
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+# endif /* BL32_BASE */
+
+ /* Fill BL33 related information */
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+ .ep_info.pc = PRELOADED_BL33_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+# else
+ .ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = DDR_BASE + DDR_SIZE -
+ PLAT_POPLAR_NS_IMAGE_OFFSET,
+# endif /* PRELOADED_BL33_BASE */
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
+#endif /* EL3_PAYLOAD_BASE */
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index 7edfab7..177630b 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -9,11 +9,13 @@
#include <bl_common.h>
#include <console.h>
#include <debug.h>
+#include <desc_image_load.h>
#include <dw_mmc.h>
#include <emmc.h>
#include <errno.h>
#include <generic_delay_timer.h>
#include <mmio.h>
+#include <optee_utils.h>
#include <partition/partition.h>
#include <platform.h>
#include <string.h>
@@ -28,6 +30,15 @@
#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+#if !LOAD_IMAGE_V2
+
+/*******************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL31, e.g. while passing control to it from BL2, bl31_params
+ * and other platform specific params
+ ******************************************************************************/
typedef struct bl2_to_bl31_params_mem {
bl31_params_t bl31_params;
image_info_t bl31_image_info;
@@ -38,13 +49,165 @@
entry_point_info_t bl31_ep_info;
} bl2_to_bl31_params_mem_t;
-static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
static bl2_to_bl31_params_mem_t bl31_params_mem;
meminfo_t *bl2_plat_sec_mem_layout(void)
{
return &bl2_tzram_layout;
}
+
+#ifdef SCP_BL2_BASE
+void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
+{
+ /*
+ * This platform has no SCP_BL2 yet
+ */
+}
+#endif
+#endif /* LOAD_IMAGE_V2 */
+
+/*******************************************************************************
+ * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
+ * Return 0 on success, -1 otherwise.
+ ******************************************************************************/
+#if LOAD_IMAGE_V2
+int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+#else
+int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
+#endif
+{
+ /*
+ * This platform has no SCP_BL2 yet
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t poplar_get_spsr_for_bl32_entry(void)
+{
+ /*
+ * The Secure Payload Dispatcher service is responsible for
+ * setting the SPSR prior to entry into the BL3-2 image.
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+#ifndef AARCH32
+uint32_t poplar_get_spsr_for_bl33_entry(void)
+{
+ unsigned long el_status;
+ unsigned int mode;
+ uint32_t spsr;
+
+ /* Figure out what mode we enter the non-secure world in */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#else
+uint32_t poplar_get_spsr_for_bl33_entry(void)
+{
+ unsigned int hyp_status, mode, spsr;
+
+ hyp_status = GET_VIRT_EXT(read_id_pfr1());
+
+ mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
+ SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#endif /* AARCH32 */
+
+#if LOAD_IMAGE_V2
+int poplar_bl2_handle_post_image_load(unsigned int image_id)
+{
+ int err = 0;
+ bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+#ifdef SPD_opteed
+ bl_mem_params_node_t *pager_mem_params = NULL;
+ bl_mem_params_node_t *paged_mem_params = NULL;
+#endif
+
+ assert(bl_mem_params);
+
+ switch (image_id) {
+#ifdef AARCH64
+ case BL32_IMAGE_ID:
+#ifdef SPD_opteed
+ pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+ assert(pager_mem_params);
+
+ paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+ assert(paged_mem_params);
+
+ err = parse_optee_header(&bl_mem_params->ep_info,
+ &pager_mem_params->image_info,
+ &paged_mem_params->image_info);
+ if (err != 0) {
+ WARN("OPTEE header parse error.\n");
+ }
+
+ /*
+ * OP-TEE expect to receive DTB address in x2.
+ * This will be copied into x2 by dispatcher.
+ * Set this (arg3) if necessary
+ */
+ /* bl_mem_params->ep_info.args.arg3 = PLAT_HIKEY_DT_BASE; */
+#endif
+ bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl32_entry();
+ break;
+#endif
+
+ case BL33_IMAGE_ID:
+ /* BL33 expects to receive the primary CPU MPID (through r0) */
+ bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+ bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl33_entry();
+ break;
+
+#ifdef SCP_BL2_BASE
+ case SCP_BL2_IMAGE_ID:
+ /* The subsequent handling of SCP_BL2 is platform specific */
+ err = plat_poplar_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+ if (err) {
+ WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+ }
+ break;
+#endif
+ }
+
+ return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return poplar_bl2_handle_post_image_load(image_id);
+}
+
+#else /* LOAD_IMAGE_V2 */
bl31_params_t *bl2_plat_get_bl31_params(void)
{
@@ -92,6 +255,10 @@
struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
{
+#if DEBUG
+ bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
+#endif
+
return &bl31_params_mem.bl31_ep_info;
}
@@ -138,32 +305,11 @@
}
#endif /* BL32_BASE */
-static uint32_t hisi_get_spsr_for_bl33_entry(void)
-{
- unsigned long el_status;
- unsigned int mode;
- uint32_t spsr;
-
- /* Figure out what mode we enter the non-secure world in */
- el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
- el_status &= ID_AA64PFR0_ELX_MASK;
-
- mode = (el_status) ? MODE_EL2 : MODE_EL1;
-
- /*
- * TODO: Consider the possibility of specifying the SPSR in
- * the FIP ToC and allowing the platform to have a say as
- * well.
- */
- spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
- return spsr;
-}
-
void bl2_plat_set_bl33_ep_info(image_info_t *image,
entry_point_info_t *bl33_ep_info)
{
SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
- bl33_ep_info->spsr = hisi_get_spsr_for_bl33_entry();
+ bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
bl33_ep_info->args.arg2 = image->image_size;
}
@@ -180,6 +326,7 @@
bl33_meminfo->free_base = DDR_BASE;
bl33_meminfo->free_size = DDR_SIZE;
}
+#endif /* LOAD_IMAGE_V2 */
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
@@ -217,7 +364,11 @@
{
}
-unsigned long plat_get_ns_image_entrypoint(void)
+uintptr_t plat_get_ns_image_entrypoint(void)
{
+#ifdef PRELOADED_BL33_BASE
+ return PRELOADED_BL33_BASE;
+#else
return PLAT_POPLAR_NS_IMAGE_OFFSET;
+#endif
}
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index e3a5c50..ec72acd 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -59,14 +59,64 @@
return NULL;
}
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+#if LOAD_IMAGE_V2
+void bl31_early_platform_setup(void *from_bl2,
+ void *plat_params_from_bl2)
+#else
void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2)
+#endif
{
console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Init console for crash report */
plat_crash_console_init();
+#if LOAD_IMAGE_V2
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
+
+ /*
+ * Copy BL33 and BL32 (if present), entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ while (bl_params) {
+ if (bl_params->image_id == BL32_IMAGE_ID)
+ bl32_image_ep_info = *bl_params->ep_info;
+
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (bl33_image_ep_info.pc == 0)
+ panic();
+
+#else /* LOAD_IMAGE_V2 */
+
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL31);
+ assert(params_from_bl2->h.version >= VERSION_1);
/*
* Copy BL32 (if populated by BL2) and BL33 entry point information.
@@ -75,6 +125,7 @@
if (from_bl2->bl32_ep_info)
bl32_image_ep_info = *from_bl2->bl32_ep_info;
bl33_image_ep_info = *from_bl2->bl33_ep_info;
+#endif /* LOAD_IMAGE_V2 */
}
void bl31_platform_setup(void)
@@ -97,8 +148,8 @@
void bl31_plat_arch_setup(void)
{
- plat_configure_mmu_el3(BL31_RO_BASE,
- (BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
+ plat_configure_mmu_el3(BL31_BASE,
+ (BL31_LIMIT - BL31_BASE),
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
diff --git a/plat/hisilicon/poplar/include/plat_private.h b/plat/hisilicon/poplar/include/plat_private.h
index e2272cc..845b1bd 100644
--- a/plat/hisilicon/poplar/include/plat_private.h
+++ b/plat/hisilicon/poplar/include/plat_private.h
@@ -24,7 +24,6 @@
unsigned long coh_start,
unsigned long coh_limit);
-void plat_delay_timer_init(void);
void plat_io_setup(void);
#endif /* __PLAT_PRIVATE_H__ */
diff --git a/plat/hisilicon/poplar/include/platform_def.h b/plat/hisilicon/poplar/include/platform_def.h
index c0f8371..805c152 100644
--- a/plat/hisilicon/poplar/include/platform_def.h
+++ b/plat/hisilicon/poplar/include/platform_def.h
@@ -16,6 +16,9 @@
#include "hi3798cv200.h"
#include "poplar_layout.h" /* BL memory region sizes, etc */
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define POPLAR_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
#define PLATFORM_LINKER_ARCH aarch64
@@ -39,9 +42,20 @@
#define MAX_IO_HANDLES (4)
#define MAX_IO_BLOCK_DEVICES (2)
+/* Memory size options */
+#define POPLAR_DRAM_SIZE_1G 0
+#define POPLAR_DRAM_SIZE_2G 1
+
/* Memory map related constants */
#define DDR_BASE (0x00000000)
+
+#if (POPLAR_DRAM_SIZE_ID == POPLAR_DRAM_SIZE_2G)
+#define DDR_SIZE (0x80000000)
+#elif (POPLAR_DRAM_SIZE_ID == POPLAR_DRAM_SIZE_1G)
#define DDR_SIZE (0x40000000)
+#else
+#error "Currently unsupported POPLAR_DRAM_SIZE_ID value"
+#endif
#define DEVICE_BASE (0xF0000000)
#define DEVICE_SIZE (0x0F000000)
@@ -64,10 +78,6 @@
#define DDR_SEC_SIZE 0x01000000
#define DDR_SEC_BASE 0x03000000
-#define BL_MEM_BASE (BL1_RO_BASE)
-#define BL_MEM_LIMIT (BL31_LIMIT)
-#define BL_MEM_SIZE (BL_MEM_LIMIT - BL_MEM_BASE)
-
/*
* BL3-2 specific defines.
*/
@@ -78,6 +88,14 @@
#define BL32_DRAM_BASE 0x03000000
#define BL32_DRAM_LIMIT 0x04000000
+#if LOAD_IMAGE_V2
+#ifdef SPD_opteed
+/* Load pageable part of OP-TEE at end of allocated DRAM space for BL32 */
+#define POPLAR_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 /* 4MB */
+#define POPLAR_OPTEE_PAGEABLE_LOAD_BASE (BL32_DRAM_LIMIT - POPLAR_OPTEE_PAGEABLE_LOAD_SIZE) /* 0x03C0_0000 */
+#endif
+#endif
+
#if (POPLAR_TSP_RAM_LOCATION_ID == POPLAR_DRAM_ID)
#define TSP_SEC_MEM_BASE BL32_DRAM_BASE
#define TSP_SEC_MEM_SIZE (BL32_DRAM_LIMIT - BL32_DRAM_BASE)
diff --git a/plat/hisilicon/poplar/include/poplar_layout.h b/plat/hisilicon/poplar/include/poplar_layout.h
index 9ce0434..9fb5a94 100644
--- a/plat/hisilicon/poplar/include/poplar_layout.h
+++ b/plat/hisilicon/poplar/include/poplar_layout.h
@@ -88,7 +88,7 @@
#define BL1_RO_SIZE 0x00008000 /* page multiple */
#define BL1_RW_SIZE 0x00008000 /* page multiple */
#define BL1_SIZE (BL1_RO_SIZE + BL1_RW_SIZE)
-#define BL2_SIZE 0x0000c000 /* page multiple */
+#define BL2_SIZE 0x0000d000 /* page multiple */
#define BL31_SIZE 0x00014000
#if !POPLAR_RECOVERY
/*
diff --git a/plat/hisilicon/poplar/plat_storage.c b/plat/hisilicon/poplar/plat_storage.c
index 468e229..db52c67 100644
--- a/plat/hisilicon/poplar/plat_storage.c
+++ b/plat/hisilicon/poplar/plat_storage.c
@@ -70,6 +70,14 @@
.uuid = UUID_SECURE_PAYLOAD_BL32,
};
+static const io_uuid_spec_t bl32_extra1_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA1,
+};
+
+static const io_uuid_spec_t bl32_extra2_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32_EXTRA2,
+};
+
static const io_uuid_spec_t bl33_uuid_spec = {
.uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
};
@@ -109,6 +117,16 @@
(uintptr_t)&bl32_uuid_spec,
open_fip
},
+ [BL32_EXTRA1_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_extra1_uuid_spec,
+ open_fip
+ },
+ [BL32_EXTRA2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_extra2_uuid_spec,
+ open_fip
+ },
[BL33_IMAGE_ID] = {
&fip_dev_handle,
(uintptr_t)&bl33_uuid_spec,
diff --git a/plat/hisilicon/poplar/platform.mk b/plat/hisilicon/poplar/platform.mk
index d53e062..7c8027e 100644
--- a/plat/hisilicon/poplar/platform.mk
+++ b/plat/hisilicon/poplar/platform.mk
@@ -4,20 +4,42 @@
# SPDX-License-Identifier: BSD-3-Clause
#
+# Enable version2 of image loading
+LOAD_IMAGE_V2 := 1
+
# On Poplar, the TSP can execute from TZC secure area in DRAM.
-POPLAR_TSP_RAM_LOCATION := dram
+POPLAR_TSP_RAM_LOCATION ?= dram
ifeq (${POPLAR_TSP_RAM_LOCATION}, dram)
POPLAR_TSP_RAM_LOCATION_ID = POPLAR_DRAM_ID
-else ifeq (${HIKEY960_TSP_RAM_LOCATION}, sram)
- POPLAR_TSP_RAM_LOCATION_ID := POPLAR_SRAM_ID
+else ifeq (${POPLAR_TSP_RAM_LOCATION}, sram)
+ POPLAR_TSP_RAM_LOCATION_ID = POPLAR_SRAM_ID
else
$(error "Currently unsupported POPLAR_TSP_RAM_LOCATION value")
endif
$(eval $(call add_define,POPLAR_TSP_RAM_LOCATION_ID))
+POPLAR_DRAM_SIZE ?= two_gig
+ifeq (${POPLAR_DRAM_SIZE}, two_gig)
+ POPLAR_DRAM_SIZE_ID = POPLAR_DRAM_SIZE_2G
+else ifeq (${POPLAR_DRAM_SIZE}, one_gig)
+ POPLAR_DRAM_SIZE_ID = POPLAR_DRAM_SIZE_1G
+else
+ $(error "Currently unsupported POPLAR_DRAM_SIZE value")
+endif
+$(eval $(call add_define,POPLAR_DRAM_SIZE_ID))
+
POPLAR_RECOVERY := 0
$(eval $(call add_define,POPLAR_RECOVERY))
+# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
+# in the FIP if the platform requires.
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+endif
+
NEED_BL33 := yes
COLD_BOOT_SINGLE_CPU := 1
@@ -68,8 +90,7 @@
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
plat/hisilicon/poplar/bl1_plat_setup.c \
- plat/hisilicon/poplar/plat_storage.c \
-
+ plat/hisilicon/poplar/plat_storage.c
BL2_SOURCES += \
drivers/arm/pl061/pl061_gpio.c \
@@ -83,6 +104,17 @@
plat/hisilicon/poplar/bl2_plat_setup.c \
plat/hisilicon/poplar/plat_storage.c
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES += \
+ plat/hisilicon/poplar/bl2_plat_mem_params_desc.c \
+ plat/hisilicon/poplar/poplar_image_load.c \
+ common/desc_image_load.c
+
+ifeq (${SPD},opteed)
+BL2_SOURCES += \
+ lib/optee/optee_utils.c
+endif
+endif
BL31_SOURCES += \
lib/cpus/aarch64/aem_generic.S \
diff --git a/plat/hisilicon/poplar/poplar_image_load.c b/plat/hisilicon/poplar/poplar_image_load.c
new file mode 100644
index 0000000..32ca36d
--- /dev/null
+++ b/plat/hisilicon/poplar/poplar_image_load.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+ flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+ return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+ return get_next_bl_params_from_mem_params_desc();
+}
diff --git a/plat/qemu/aarch32/plat_helpers.S b/plat/qemu/aarch32/plat_helpers.S
new file mode 100644
index 0000000..a9b1d8f
--- /dev/null
+++ b/plat/qemu/aarch32/plat_helpers.S
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <platform_def.h>
+
+ .globl plat_my_core_pos
+ .globl plat_get_my_entrypoint
+ .globl platform_mem_init
+ .globl plat_qemu_calc_core_pos
+ .globl plat_crash_console_init
+ .globl plat_crash_console_putc
+ .globl plat_secondary_cold_boot_setup
+ .globl plat_get_my_entrypoint
+ .globl plat_is_my_cpu_primary
+
+
+func plat_my_core_pos
+ ldcopr r0, MPIDR
+ b plat_qemu_calc_core_pos
+endfunc plat_my_core_pos
+
+/*
+ * unsigned int plat_qemu_calc_core_pos(u_register_t mpidr);
+ * With this function: CorePos = (ClusterId * 4) + CoreId
+ */
+func plat_qemu_calc_core_pos
+ and r1, r0, #MPIDR_CPU_MASK
+ and r0, r0, #MPIDR_CLUSTER_MASK
+ add r0, r1, r0, LSR #6
+ bx lr
+endfunc plat_qemu_calc_core_pos
+
+ /* -----------------------------------------------------
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu.
+ * -----------------------------------------------------
+ */
+func plat_is_my_cpu_primary
+ ldcopr r0, MPIDR
+ ldr r1, =(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+ and r0, r1
+ cmp r0, #QEMU_PRIMARY_CPU
+ moveq r0, #1
+ movne r0, #0
+ bx lr
+endfunc plat_is_my_cpu_primary
+
+ /* -----------------------------------------------------
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ * -----------------------------------------------------
+ */
+func plat_secondary_cold_boot_setup
+ /* Calculate address of our hold entry */
+ bl plat_my_core_pos
+ lsl r0, r0, #PLAT_QEMU_HOLD_ENTRY_SHIFT
+ mov_imm r2, PLAT_QEMU_HOLD_BASE
+
+ /* Wait until we have a go */
+poll_mailbox:
+ ldr r1, [r2, r0]
+ cmp r1, #0
+ beq 1f
+ mov_imm r0, PLAT_QEMU_TRUSTED_MAILBOX_BASE
+ ldr r1, [r0]
+ bx r1
+1:
+ wfe
+ b poll_mailbox
+endfunc plat_secondary_cold_boot_setup
+
+func plat_get_my_entrypoint
+ /* TODO support warm boot */
+ mov r0, #0
+ bx lr
+endfunc plat_get_my_entrypoint
+
+func platform_mem_init
+ bx lr
+endfunc platform_mem_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_init(void)
+ * Function to initialize the crash console
+ * without a C Runtime to print crash report.
+ * Clobber list : x0, x1, x2
+ * ---------------------------------------------
+ */
+func plat_crash_console_init
+ mov_imm r0, PLAT_QEMU_CRASH_UART_BASE
+ mov_imm r1, PLAT_QEMU_CRASH_UART_CLK_IN_HZ
+ mov_imm r2, PLAT_QEMU_CONSOLE_BAUDRATE
+ b console_core_init
+endfunc plat_crash_console_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_putc(int c)
+ * Function to print a character on the crash
+ * console without a C Runtime.
+ * Clobber list : x1, x2
+ * ---------------------------------------------
+ */
+func plat_crash_console_putc
+ mov_imm r1, PLAT_QEMU_CRASH_UART_BASE
+ b console_core_putc
+endfunc plat_crash_console_putc
+
diff --git a/plat/qemu/include/platform_def.h b/plat/qemu/include/platform_def.h
index 0ae28ea..3eafb43 100644
--- a/plat/qemu/include/platform_def.h
+++ b/plat/qemu/include/platform_def.h
@@ -16,10 +16,17 @@
#define PLATFORM_STACK_SIZE 0x1000
+#if ARM_ARCH_MAJOR == 7
+#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
+#define PLATFORM_CLUSTER_COUNT 1
+#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CLUSTER1_CORE_COUNT 0
+#else
#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
#define PLATFORM_CLUSTER_COUNT 2
#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
#define PLATFORM_CLUSTER1_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
+#endif
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
PLATFORM_CLUSTER1_CORE_COUNT)
diff --git a/plat/qemu/platform.mk b/plat/qemu/platform.mk
index 43ab846..334fbe4 100644
--- a/plat/qemu/platform.mk
+++ b/plat/qemu/platform.mk
@@ -1,9 +1,28 @@
#
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
+ifeq (${ARM_ARCH_MAJOR},7)
+# ARMv7 Qemu support in trusted firmware expects the Cortex-A15 model.
+# Qemu Cortex-A15 model does not implement the virtualization extension.
+# For this reason, we cannot set ARM_CORTEX_A15=yes and must define all
+# the ARMv7 build directives.
+MARCH32_DIRECTIVE := -mcpu=cortex-a15
+$(eval $(call add_define,ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING))
+$(eval $(call add_define,ARMV7_SUPPORTS_GENERIC_TIMER))
+# Qemu expects a BL32 boot stage.
+NEED_BL32 := yes
+endif # ARMv7
+
+ifeq (${SPD},opteed)
+add-lib-optee := yes
+endif
+ifeq ($(AARCH32_SP),optee)
+add-lib-optee := yes
+endif
+
include lib/libfdt/libfdt.mk
# Enable new version of image loading on QEMU platforms
@@ -15,10 +34,13 @@
PLAT_PATH := plat/qemu/
PLAT_INCLUDES := -Iinclude/plat/arm/common/ \
- -Iinclude/plat/arm/common/aarch64/ \
-Iplat/qemu/include \
-Iinclude/common/tbbr
+ifeq (${ARM_ARCH_MAJOR},8)
+PLAT_INCLUDES += -Iinclude/plat/arm/common/${ARCH}
+endif
+
# Use translation tables library v2 by default
ARM_XLAT_TABLES_LIB_V1 := 0
$(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
@@ -26,11 +48,11 @@
PLAT_BL_COMMON_SOURCES := plat/qemu/qemu_common.c \
- drivers/arm/pl011/aarch64/pl011_console.S
+ drivers/arm/pl011/${ARCH}/pl011_console.S
ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \
- lib/xlat_tables/aarch64/xlat_tables.c
+ lib/xlat_tables/${ARCH}/xlat_tables.c
else
include lib/xlat_tables_v2/xlat_tables.mk
@@ -87,22 +109,27 @@
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
lib/semihosting/semihosting.c \
- lib/semihosting/aarch64/semihosting_call.S \
+ lib/semihosting/${ARCH}/semihosting_call.S \
plat/qemu/qemu_io_storage.c \
- lib/cpus/aarch64/aem_generic.S \
- lib/cpus/aarch64/cortex_a53.S \
- lib/cpus/aarch64/cortex_a57.S \
- plat/qemu/aarch64/plat_helpers.S \
+ plat/qemu/${ARCH}/plat_helpers.S \
plat/qemu/qemu_bl1_setup.c
+ifeq (${ARM_ARCH_MAJOR},8)
+BL1_SOURCES += lib/cpus/aarch64/aem_generic.S \
+ lib/cpus/aarch64/cortex_a53.S \
+ lib/cpus/aarch64/cortex_a57.S
+else
+BL1_SOURCES += lib/cpus/${ARCH}/cortex_a15.S
+endif
+
BL2_SOURCES += drivers/io/io_semihosting.c \
drivers/io/io_storage.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
lib/semihosting/semihosting.c \
- lib/semihosting/aarch64/semihosting_call.S\
+ lib/semihosting/${ARCH}/semihosting_call.S\
plat/qemu/qemu_io_storage.c \
- plat/qemu/aarch64/plat_helpers.S \
+ plat/qemu/${ARCH}/plat_helpers.S \
plat/qemu/qemu_bl2_setup.c \
plat/qemu/dt.c \
$(LIBFDT_SRCS)
@@ -111,11 +138,12 @@
plat/qemu/qemu_image_load.c \
common/desc_image_load.c
endif
-ifeq (${SPD},opteed)
+ifeq ($(add-lib-optee),yes)
BL2_SOURCES += lib/optee/optee_utils.c
endif
+ifeq (${ARM_ARCH_MAJOR},8)
BL31_SOURCES += lib/cpus/aarch64/aem_generic.S \
lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a57.S \
@@ -128,15 +156,15 @@
plat/qemu/aarch64/plat_helpers.S \
plat/qemu/qemu_bl31_setup.c \
plat/qemu/qemu_gic.c
-
+endif
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
endif
# Disable the PSCI platform compatibility layer
diff --git a/plat/qemu/qemu_bl1_setup.c b/plat/qemu/qemu_bl1_setup.c
index 5a70558..7c820fd 100644
--- a/plat/qemu/qemu_bl1_setup.c
+++ b/plat/qemu/qemu_bl1_setup.c
@@ -57,9 +57,15 @@
* does basic initialization. Later architectural setup (bl1_arch_setup())
* does not do anything platform specific.
*****************************************************************************/
+#ifdef AARCH32
+#define QEMU_CONFIGURE_BL1_MMU(...) qemu_configure_mmu_secure(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL1_MMU(...) qemu_configure_mmu_el3(__VA_ARGS__)
+#endif
+
void bl1_plat_arch_setup(void)
{
- qemu_configure_mmu_el3(bl1_tzram_layout.total_base,
+ QEMU_CONFIGURE_BL1_MMU(bl1_tzram_layout.total_base,
bl1_tzram_layout.total_size,
BL1_RO_BASE, BL1_RO_LIMIT,
BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
diff --git a/plat/qemu/qemu_bl2_mem_params_desc.c b/plat/qemu/qemu_bl2_mem_params_desc.c
index 47f88ac..9965cfd 100644
--- a/plat/qemu/qemu_bl2_mem_params_desc.c
+++ b/plat/qemu/qemu_bl2_mem_params_desc.c
@@ -34,6 +34,7 @@
.next_handoff_image_id = INVALID_IMAGE_ID,
},
#else /* EL3_PAYLOAD_BASE */
+#ifdef AARCH64
/* Fill BL31 related information */
{ .image_id = BL31_IMAGE_ID,
@@ -57,16 +58,27 @@
.next_handoff_image_id = BL33_IMAGE_ID,
# endif
},
+#endif /* AARCH64 */
# ifdef QEMU_LOAD_BL32
+
+#ifdef AARCH64
+#define BL32_EP_ATTRIBS (SECURE | EXECUTABLE)
+#define BL32_IMG_ATTRIBS 0
+#else
+#define BL32_EP_ATTRIBS (SECURE | EXECUTABLE | EP_FIRST_EXE)
+#define BL32_IMG_ATTRIBS IMAGE_ATTRIB_PLAT_SETUP
+#endif
+
/* Fill BL32 related information */
{ .image_id = BL32_IMAGE_ID,
SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
- entry_point_info_t, SECURE | EXECUTABLE),
+ entry_point_info_t, BL32_EP_ATTRIBS),
.ep_info.pc = BL32_BASE,
- SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2, image_info_t,
- 0),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+ image_info_t, BL32_IMG_ATTRIBS),
+
.image_info.image_base = BL32_BASE,
.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
@@ -103,7 +115,7 @@
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
.image_info.image_base = QEMU_OPTEE_PAGEABLE_LOAD_BASE,
.image_info.image_max_size = QEMU_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
index 60d9623..9e4a4a0 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -9,10 +9,9 @@
#include <console.h>
#include <debug.h>
#include <desc_image_load.h>
-#ifdef SPD_opteed
#include <optee_utils.h>
-#endif
#include <libfdt.h>
+#include <platform.h>
#include <platform_def.h>
#include <string.h>
#include <utils.h>
@@ -183,9 +182,15 @@
/* TODO Initialize timer */
}
+#ifdef AARCH32
+#define QEMU_CONFIGURE_BL2_MMU(...) qemu_configure_mmu_secure(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL2_MMU(...) qemu_configure_mmu_el1(__VA_ARGS__)
+#endif
+
void bl2_plat_arch_setup(void)
{
- qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
+ QEMU_CONFIGURE_BL2_MMU(bl2_tzram_layout.total_base,
bl2_tzram_layout.total_size,
BL2_RO_BASE, BL2_RO_LIMIT,
BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
@@ -196,11 +201,16 @@
******************************************************************************/
static uint32_t qemu_get_spsr_for_bl32_entry(void)
{
+#ifdef AARCH64
/*
* The Secure Payload Dispatcher service is responsible for
* setting the SPSR prior to entry into the BL3-2 image.
*/
return 0;
+#else
+ return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE,
+ DISABLE_ALL_EXCEPTIONS);
+#endif
}
/*******************************************************************************
@@ -208,8 +218,9 @@
******************************************************************************/
static uint32_t qemu_get_spsr_for_bl33_entry(void)
{
- unsigned int mode;
uint32_t spsr;
+#ifdef AARCH64
+ unsigned int mode;
/* Figure out what mode we enter the non-secure world in */
mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1;
@@ -220,6 +231,11 @@
* well.
*/
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+#else
+ spsr = SPSR_MODE32(MODE32_svc,
+ plat_get_ns_image_entrypoint() & 0x1,
+ SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+#endif
return spsr;
}
@@ -228,7 +244,7 @@
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
bl_mem_params_node_t *pager_mem_params = NULL;
bl_mem_params_node_t *paged_mem_params = NULL;
#endif
@@ -236,9 +252,8 @@
assert(bl_mem_params);
switch (image_id) {
-# ifdef AARCH64
case BL32_IMAGE_ID:
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params);
@@ -252,16 +267,31 @@
WARN("OPTEE header parse error.\n");
}
+#if defined(SPD_opteed)
/*
* OP-TEE expect to receive DTB address in x2.
* This will be copied into x2 by dispatcher.
*/
bl_mem_params->ep_info.args.arg3 = PLAT_QEMU_DT_BASE;
+#else /* case AARCH32_SP_OPTEE */
+ bl_mem_params->ep_info.args.arg0 =
+ bl_mem_params->ep_info.args.arg1;
+ bl_mem_params->ep_info.args.arg1 = 0;
+ bl_mem_params->ep_info.args.arg2 = PLAT_QEMU_DT_BASE;
+ bl_mem_params->ep_info.args.arg3 = 0;
+#endif
#endif
bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl32_entry();
break;
-# endif
+
case BL33_IMAGE_ID:
+#ifdef AARCH32_SP_OPTEE
+ /* AArch32 only core: OP-TEE expects NSec EP in register LR */
+ pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
+ assert(pager_mem_params);
+ pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
+#endif
+
/* BL33 expects to receive the primary CPU MPID (through r0) */
bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl33_entry();
@@ -349,7 +379,7 @@
}
#endif /* !LOAD_IMAGE_V2 */
-unsigned long plat_get_ns_image_entrypoint(void)
+uintptr_t plat_get_ns_image_entrypoint(void)
{
return NS_IMAGE_OFFSET;
}
diff --git a/plat/qemu/qemu_common.c b/plat/qemu/qemu_common.c
index e34b16f..6f9fcc6 100644
--- a/plat/qemu/qemu_common.c
+++ b/plat/qemu/qemu_common.c
@@ -85,6 +85,16 @@
{0}
};
#endif
+#ifdef IMAGE_BL32
+static const mmap_region_t plat_qemu_mmap[] = {
+ MAP_SHARED_RAM,
+ MAP_DEVICE0,
+#ifdef MAP_DEVICE1
+ MAP_DEVICE1,
+#endif
+ {0}
+};
+#endif
/*******************************************************************************
* Macro generating the code for the function setting up the pagetables as per
@@ -92,7 +102,7 @@
******************************************************************************/
#define DEFINE_CONFIGURE_MMU_EL(_el) \
- void qemu_configure_mmu_el##_el(unsigned long total_base, \
+ void qemu_configure_mmu_##_el(unsigned long total_base, \
unsigned long total_size, \
unsigned long ro_start, \
unsigned long ro_limit, \
@@ -111,11 +121,15 @@
mmap_add(plat_qemu_mmap); \
init_xlat_tables(); \
\
- enable_mmu_el##_el(0); \
+ enable_mmu_##_el(0); \
}
/* Define EL1 and EL3 variants of the function initialising the MMU */
-DEFINE_CONFIGURE_MMU_EL(1)
-DEFINE_CONFIGURE_MMU_EL(3)
+#ifdef AARCH32
+DEFINE_CONFIGURE_MMU_EL(secure)
+#else
+DEFINE_CONFIGURE_MMU_EL(el1)
+DEFINE_CONFIGURE_MMU_EL(el3)
+#endif
diff --git a/plat/qemu/qemu_private.h b/plat/qemu/qemu_private.h
index 1671ec7..202d604 100644
--- a/plat/qemu/qemu_private.h
+++ b/plat/qemu/qemu_private.h
@@ -9,6 +9,11 @@
#include <sys/types.h>
+void qemu_configure_mmu_secure(unsigned long total_base,
+ unsigned long total_size,
+ unsigned long ro_start, unsigned long ro_limit,
+ unsigned long coh_start, unsigned long coh_limit);
+
void qemu_configure_mmu_el1(unsigned long total_base, unsigned long total_size,
unsigned long ro_start, unsigned long ro_limit,
unsigned long coh_start, unsigned long coh_limit);
diff --git a/plat/qemu/sp_min/sp_min-qemu.mk b/plat/qemu/sp_min/sp_min-qemu.mk
new file mode 100644
index 0000000..5e8875b
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min-qemu.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+BL32_SOURCES += plat/qemu/sp_min/sp_min_setup.c \
+ plat/qemu/aarch32/plat_helpers.S \
+ plat/qemu/qemu_gic.c \
+ plat/qemu/qemu_pm.c \
+ plat/qemu/topology.c
+
+BL32_SOURCES += lib/cpus/aarch32/aem_generic.S \
+ lib/cpus/aarch32/cortex_a15.S
+
+BL32_SOURCES += plat/common/aarch32/platform_mp_stack.S \
+ plat/common/plat_psci_common.c
+
+
+BL32_SOURCES += drivers/arm/gic/v2/gicv2_helpers.c \
+ drivers/arm/gic/v2/gicv2_main.c \
+ drivers/arm/gic/common/gic_common.c
diff --git a/plat/qemu/sp_min/sp_min_setup.c b/plat/qemu/sp_min/sp_min_setup.c
new file mode 100644
index 0000000..fd8fa1c
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min_setup.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <arm_gic.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+#include <xlat_tables.h>
+#include "../qemu_private.h"
+
+#if RESET_TO_SP_MIN
+#error qemu does not support RESET_TO_SP_MIN
+#endif
+
+static entry_point_info_t bl33_image_ep_info;
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL3-1 image. These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned. It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_RO_BASE (unsigned long)(&__RO_START__)
+#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
+#define BL32_END (unsigned long)(&__BL32_END__)
+
+#if USE_COHERENT_MEM
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned. It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+#endif
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+#define PLATFORM_G1S_PROPS(grp) \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, \
+ grp, GIC_INTR_CFG_LEVEL)
+
+#define PLATFORM_G0_PROPS(grp)
+
+static const interrupt_prop_t stih410_interrupt_props[] = {
+ PLATFORM_G1S_PROPS(GICV2_INTR_GROUP0),
+ PLATFORM_G0_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const struct gicv2_driver_data plat_gicv2_driver_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .interrupt_props = stih410_interrupt_props,
+ .interrupt_props_num = ARRAY_SIZE(stih410_interrupt_props),
+ .target_masks = target_mask_array,
+ .target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *sp_min_plat_get_bl33_ep_info(void)
+{
+ entry_point_info_t *next_image_info = &bl33_image_ep_info;
+
+ /*
+ * None of the images on the ARM development platforms can have 0x0
+ * as the entrypoint
+ */
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+void sp_min_early_platform_setup(void *from_bl2, void *plat_params_from_bl2)
+{
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+ /* Initialize the console to provide early debug support */
+ console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
+ PLAT_QEMU_CONSOLE_BAUDRATE);
+
+ ERROR("qemu sp_min, console init\n");
+ /*
+ * Check params passed from BL2
+ */
+ assert(params_from_bl2);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
+
+ /*
+ * Copy BL33 entry point information from BL2's address space.
+ */
+ while (bl_params) {
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (!bl33_image_ep_info.pc)
+ panic();
+}
+
+void sp_min_plat_arch_setup(void)
+{
+ qemu_configure_mmu_secure(BL32_RO_BASE, BL32_END - BL32_RO_BASE,
+ BL32_RO_BASE, BL32_RO_LIMIT,
+ BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
+
+}
+
+void sp_min_platform_setup(void)
+{
+ /* Initialize the gic cpu and distributor interfaces */
+ gicv2_driver_init(&plat_gicv2_driver_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+void sp_min_plat_fiq_handler(uint32_t id)
+{
+ VERBOSE("[sp_min] interrupt #%d\n", id);
+}
diff --git a/plat/socionext/uniphier/platform.mk b/plat/socionext/uniphier/platform.mk
index 18b56a0..6de5164 100644
--- a/plat/socionext/uniphier/platform.mk
+++ b/plat/socionext/uniphier/platform.mk
@@ -103,6 +103,23 @@
endif
+ifeq (${FIP_GZIP},1)
+
+include lib/zlib/zlib.mk
+
+BL2_SOURCES += common/image_decompress.c \
+ $(ZLIB_SOURCES)
+
+$(eval $(call add_define,UNIPHIER_DECOMPRESS_GZIP))
+
+# compress all images loaded by BL2
+SCP_BL2_PRE_TOOL_FILTER := GZIP
+BL31_PRE_TOOL_FILTER := GZIP
+BL32_PRE_TOOL_FILTER := GZIP
+BL33_PRE_TOOL_FILTER := GZIP
+
+endif
+
.PHONY: bl2_gzip
bl2_gzip: $(BUILD_PLAT)/bl2.bin.gz
%.gz: %
diff --git a/plat/socionext/uniphier/uniphier.h b/plat/socionext/uniphier/uniphier.h
index 2af30df..1768e3b 100644
--- a/plat/socionext/uniphier/uniphier.h
+++ b/plat/socionext/uniphier/uniphier.h
@@ -42,7 +42,9 @@
int uniphier_io_setup(unsigned int soc);
int uniphier_check_image(unsigned int image_id);
-void uniphier_image_descs_fixup(void);
+
+struct image_info;
+struct image_info *uniphier_get_image_info(unsigned int image_id);
int uniphier_scp_is_running(void);
void uniphier_scp_start(void);
@@ -80,7 +82,11 @@
#define UNIPHIER_BLOCK_BUF_BASE ((UNIPHIER_SCP_BASE) + \
(UNIPHIER_SCP_MAX_SIZE))
-#define UNIPHIER_BLOCK_BUF_SIZE ((UNIPHIER_NS_DRAM_LIMIT) - \
- (UNIPHIER_BLOCK_BUF_BASE))
+#define UNIPHIER_BLOCK_BUF_SIZE 0x00100000
+
+#define UNIPHIER_IMAGE_BUF_BASE ((UNIPHIER_BLOCK_BUF_BASE) + \
+ (UNIPHIER_BLOCK_BUF_SIZE))
+#define UNIPHIER_IMAGE_BUF_SIZE ((UNIPHIER_NS_DRAM_LIMIT) - \
+ (UNIPHIER_IMAGE_BUF_BASE))
#endif /* __UNIPHIER_H__ */
diff --git a/plat/socionext/uniphier/uniphier_bl2_setup.c b/plat/socionext/uniphier/uniphier_bl2_setup.c
index 29108c0..54b30e5 100644
--- a/plat/socionext/uniphier/uniphier_bl2_setup.c
+++ b/plat/socionext/uniphier/uniphier_bl2_setup.c
@@ -9,8 +9,12 @@
#include <desc_image_load.h>
#include <errno.h>
#include <io/io_storage.h>
+#include <image_decompress.h>
#include <platform.h>
#include <platform_def.h>
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+#include <tf_gunzip.h>
+#endif
#include <xlat_tables_v2.h>
#include "uniphier.h"
@@ -93,8 +97,12 @@
}
}
- if (skip_scp)
- uniphier_image_descs_fixup();
+ if (skip_scp) {
+ struct image_info *image_info;
+
+ image_info = uniphier_get_image_info(SCP_BL2_IMAGE_ID);
+ image_info->h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
+ }
}
void bl2_platform_setup(void)
@@ -116,8 +124,38 @@
return get_next_bl_params_from_mem_params_desc();
}
+void bl2_plat_preload_setup(void)
+{
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+ image_decompress_init(UNIPHIER_IMAGE_BUF_BASE,
+ UNIPHIER_IMAGE_BUF_SIZE,
+ gunzip);
+#endif
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+ image_decompress_prepare(uniphier_get_image_info(image_id));
+#endif
+ return 0;
+}
+
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+ struct image_info *image_info;
+ int ret;
+
+ image_info = uniphier_get_image_info(image_id);
+
+ if (!(image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
+ ret = image_decompress(uniphier_get_image_info(image_id));
+ if (ret)
+ return ret;
+ }
+#endif
+
if (image_id == SCP_BL2_IMAGE_ID && uniphier_bl2_kick_scp)
uniphier_scp_start();
diff --git a/plat/socionext/uniphier/uniphier_image_desc.c b/plat/socionext/uniphier/uniphier_image_desc.c
index 1e474c5..f4651db 100644
--- a/plat/socionext/uniphier/uniphier_image_desc.c
+++ b/plat/socionext/uniphier/uniphier_image_desc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -86,12 +86,11 @@
};
REGISTER_BL_IMAGE_DESCS(uniphier_image_descs)
-/* SCP is optional. Allow run-time fixup of the descriptor array. */
-void uniphier_image_descs_fixup(void)
+struct image_info *uniphier_get_image_info(unsigned int image_id)
{
struct bl_mem_params_node *desc;
- desc = get_bl_mem_params_node(SCP_BL2_IMAGE_ID);
- assert(desc != NULL);
- desc->image_info.h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
+ desc = get_bl_mem_params_node(image_id);
+ assert(desc);
+ return &desc->image_info;
}