refactor(versal): move set wake src fn to common place
Moved pm_client_set_wakeup_sources() to make common for both Versal and
Versal NET platforms.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Change-Id: Ib82c5f85a0a27bc47940f6796f1cf68b2c38a908
diff --git a/plat/xilinx/versal/include/platform_def.h b/plat/xilinx/versal/include/platform_def.h
index e47a6b5..bd23bfb 100644
--- a/plat/xilinx/versal/include/platform_def.h
+++ b/plat/xilinx/versal/include/platform_def.h
@@ -102,4 +102,6 @@
INTR_PROP_DESC(PLAT_VERSAL_IPI_IRQ, GIC_HIGHEST_SEC_PRIORITY, grp, \
GIC_INTR_CFG_EDGE), \
+#define IRQ_MAX 142U
+
#endif /* PLATFORM_DEF_H */
diff --git a/plat/xilinx/versal/pm_service/pm_client.c b/plat/xilinx/versal/pm_service/pm_client.c
index 7910d8f..d61788d 100644
--- a/plat/xilinx/versal/pm_service/pm_client.c
+++ b/plat/xilinx/versal/pm_service/pm_client.c
@@ -25,8 +25,6 @@
#include "pm_defs.h"
#define UNDEFINED_CPUID (~0)
-#define IRQ_MAX 142U
-#define NUM_GICD_ISENABLER ((IRQ_MAX >> 5U) + 1U)
DEFINE_BAKERY_LOCK(pm_client_secure_lock);
@@ -106,63 +104,13 @@
*
* Return: PM node index corresponding to the specified interrupt
*/
-static enum pm_device_node_idx irq_to_pm_node_idx(uint32_t irq)
+enum pm_device_node_idx irq_to_pm_node_idx(uint32_t irq)
{
assert(irq <= IRQ_MAX);
return irq_node_map[irq];
}
/**
- * pm_client_set_wakeup_sources - Set all devices with enabled interrupts as
- * wake sources in the LibPM.
- * @node_id: Node id of processor
- */
-static void pm_client_set_wakeup_sources(uint32_t node_id)
-{
- uint32_t reg_num;
- uint32_t device_id;
- uint8_t pm_wakeup_nodes_set[XPM_NODEIDX_DEV_MAX] = { 0U };
- uintptr_t isenabler1 = PLAT_GICD_BASE_VALUE + GICD_ISENABLER + 4;
-
- for (reg_num = 0U; reg_num < NUM_GICD_ISENABLER; reg_num++) {
- uint32_t base_irq = reg_num << ISENABLER_SHIFT;
- uint32_t reg = mmio_read_32(isenabler1 + (reg_num << 2));
-
- if (reg == 0U) {
- continue;
- }
-
- while (reg != 0U) {
- enum pm_device_node_idx node_idx;
- uint32_t idx, irq, lowest_set = reg & (-reg);
- enum pm_ret_status ret;
-
- idx = __builtin_ctz(lowest_set);
- irq = base_irq + idx;
-
- if (irq > IRQ_MAX) {
- break;
- }
-
- node_idx = irq_to_pm_node_idx(irq);
- reg &= ~lowest_set;
-
- if (node_idx > XPM_NODEIDX_DEV_MIN && node_idx < XPM_NODEIDX_DEV_MAX) {
- if (pm_wakeup_nodes_set[node_idx] == 0U) {
- /* Get device ID from node index */
- device_id = PERIPH_DEVID(node_idx);
- ret = pm_set_wakeup_source(node_id,
- device_id, 1,
- SECURE_FLAG);
- pm_wakeup_nodes_set[node_idx] = (ret == PM_RET_SUCCESS) ?
- 1 : 0;
- }
- }
- }
- }
-}
-
-/**
* pm_client_suspend() - Client-specific suspend actions
*
* This function should contain any PU-specific actions