feat(plat/imx/imx8m/imx8mp): add in BL2 with FIP
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have its
address range modified upwards to accommodate. BL31 must be loaded from a
FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is unaffected
and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I78914d6002755f733ea866127cb47982a00f9700
diff --git a/plat/imx/imx8m/imx8mp/platform.mk b/plat/imx/imx8m/imx8mp/platform.mk
index 6be2f98..f134f33 100644
--- a/plat/imx/imx8m/imx8mp/platform.mk
+++ b/plat/imx/imx8m/imx8mp/platform.mk
@@ -6,7 +6,9 @@
PLAT_INCLUDES := -Iplat/imx/common/include \
-Iplat/imx/imx8m/include \
- -Iplat/imx/imx8m/imx8mp/include
+ -Iplat/imx/imx8m/imx8mp/include \
+ -Idrivers/imx/usdhc \
+ -Iinclude/common/tbbr
# Translation tables library
include lib/xlat_tables_v2/xlat_tables.mk
@@ -40,6 +42,58 @@
${IMX_GIC_SOURCES} \
${XLAT_TABLES_LIB_SRCS}
+ifeq (${NEED_BL2},yes)
+BL2_SOURCES += common/desc_image_load.c \
+ plat/imx/common/imx8_helpers.S \
+ plat/imx/common/imx_uart_console.S \
+ plat/imx/imx8m/imx8mp/imx8mp_bl2_el3_setup.c \
+ plat/imx/imx8m/imx8mp/gpc.c \
+ plat/imx/imx8m/imx_aipstz.c \
+ plat/imx/imx8m/imx_rdc.c \
+ plat/imx/imx8m/imx8m_caam.c \
+ plat/common/plat_psci_common.c \
+ lib/cpus/aarch64/cortex_a53.S \
+ drivers/arm/tzc/tzc380.c \
+ drivers/delay_timer/delay_timer.c \
+ drivers/delay_timer/generic_delay_timer.c \
+ ${PLAT_GIC_SOURCES} \
+ ${PLAT_DRAM_SOURCES} \
+ ${XLAT_TABLES_LIB_SRCS} \
+ drivers/mmc/mmc.c \
+ drivers/io/io_block.c \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ drivers/imx/usdhc/imx_usdhc.c \
+ plat/imx/imx8m/imx8mp/imx8mp_bl2_mem_params_desc.c \
+ plat/imx/common/imx_io_storage.c \
+ plat/imx/imx8m/imx8m_image_load.c \
+ lib/optee/optee_utils.c
+endif
+
+# Add the build options to pack BLx images and kernel device tree
+# in the FIP if the platform requires.
+ifneq ($(BL2),)
+RESET_TO_BL31 := 0
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+endif
+ifneq ($(BL32_EXTRA1),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+endif
+ifneq ($(BL32_EXTRA2),)
+$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+endif
+ifneq ($(HW_CONFIG),)
+$(eval $(call TOOL_ADD_IMG,HW_CONFIG,--hw-config))
+endif
+
+ifeq (${NEED_BL2},yes)
+$(eval $(call add_define,NEED_BL2))
+LOAD_IMAGE_V2 := 1
+# Non-TF Boot ROM
+BL2_AT_EL3 := 1
+endif
+
USE_COHERENT_MEM := 1
RESET_TO_BL31 := 1
A53_DISABLE_NON_TEMPORAL_HINT := 0