diff --git a/plat/st/common/bl2_io_storage.c b/plat/st/common/bl2_io_storage.c
index 18342aa..5b649a3 100644
--- a/plat/st/common/bl2_io_storage.c
+++ b/plat/st/common/bl2_io_storage.c
@@ -57,12 +57,12 @@
 
 static const io_block_spec_t bl32_block_spec = {
 	.offset = BL32_BASE,
-	.length = STM32MP1_BL32_SIZE
+	.length = STM32MP_BL32_SIZE
 };
 
 static const io_block_spec_t bl2_block_spec = {
 	.offset = BL2_BASE,
-	.length = STM32MP1_BL2_SIZE,
+	.length = STM32MP_BL2_SIZE,
 };
 
 static const struct stm32image_part_info bl33_partition_spec = {
@@ -163,7 +163,7 @@
 	}
 }
 
-void stm32mp1_io_setup(void)
+void stm32mp_io_setup(void)
 {
 	int io_result __unused;
 	uint8_t idx;
@@ -173,7 +173,7 @@
 	uintptr_t mmc_default_instance;
 	const partition_entry_t *entry;
 	boot_api_context_t *boot_context =
-		(boot_api_context_t *)stm32mp1_get_boot_ctx_address();
+		(boot_api_context_t *)stm32mp_get_boot_ctx_address();
 
 	print_boot_device(boot_context);
 
@@ -200,21 +200,21 @@
 		if (boot_context->boot_interface_selected ==
 		    BOOT_API_CTX_BOOT_INTERFACE_SEL_FLASH_EMMC) {
 			device_info.mmc_dev_type = MMC_IS_EMMC;
-			mmc_default_instance = STM32MP1_SDMMC2_BASE;
+			mmc_default_instance = STM32MP_SDMMC2_BASE;
 		} else {
 			device_info.mmc_dev_type = MMC_IS_SD;
-			mmc_default_instance = STM32MP1_SDMMC1_BASE;
+			mmc_default_instance = STM32MP_SDMMC1_BASE;
 		}
 
 		switch (boot_context->boot_interface_instance) {
 		case 1:
-			params.reg_base = STM32MP1_SDMMC1_BASE;
+			params.reg_base = STM32MP_SDMMC1_BASE;
 			break;
 		case 2:
-			params.reg_base = STM32MP1_SDMMC2_BASE;
+			params.reg_base = STM32MP_SDMMC2_BASE;
 			break;
 		case 3:
-			params.reg_base = STM32MP1_SDMMC3_BASE;
+			params.reg_base = STM32MP_SDMMC3_BASE;
 			break;
 		default:
 			WARN("SDMMC instance not found, using default\n");
diff --git a/plat/st/common/include/stm32mp_common.h b/plat/st/common/include/stm32mp_common.h
index 11dd845..269d8ac 100644
--- a/plat/st/common/include/stm32mp_common.h
+++ b/plat/st/common/include/stm32mp_common.h
@@ -7,9 +7,11 @@
 #ifndef STM32MP_COMMON_H
 #define STM32MP_COMMON_H
 
+#include <stdbool.h>
+
 /* Functions to save and get boot context address given by ROM code */
-void stm32mp1_save_boot_ctx_address(uintptr_t address);
-uintptr_t stm32mp1_get_boot_ctx_address(void);
+void stm32mp_save_boot_ctx_address(uintptr_t address);
+uintptr_t stm32mp_get_boot_ctx_address(void);
 
 /*
  * Platform util functions for the GPIO driver
@@ -28,7 +30,16 @@
 unsigned long stm32_get_gpio_bank_clock(unsigned int bank);
 uint32_t stm32_get_gpio_bank_offset(unsigned int bank);
 
+/*
+ * Util for clock gating and to get clock rate for stm32 and platform drivers
+ * @id: Target clock ID, ID used in clock DT bindings
+ */
+bool stm32mp_clk_is_enabled(unsigned long id);
+int stm32mp_clk_enable(unsigned long id);
+int stm32mp_clk_disable(unsigned long id);
+unsigned long stm32mp_clk_get_rate(unsigned long id);
+
 /* Initialise the IO layer and register platform IO devices */
-void stm32mp1_io_setup(void);
+void stm32mp_io_setup(void);
 
 #endif /* STM32MP_COMMON_H */
diff --git a/plat/st/common/stm32mp_common.c b/plat/st/common/stm32mp_common.c
index 7744aa0..20aa57d 100644
--- a/plat/st/common/stm32mp_common.c
+++ b/plat/st/common/stm32mp_common.c
@@ -25,12 +25,12 @@
 
 static uintptr_t boot_ctx_address;
 
-void stm32mp1_save_boot_ctx_address(uintptr_t address)
+void stm32mp_save_boot_ctx_address(uintptr_t address)
 {
 	boot_ctx_address = address;
 }
 
-uintptr_t stm32mp1_get_boot_ctx_address(void)
+uintptr_t stm32mp_get_boot_ctx_address(void)
 {
 	return boot_ctx_address;
 }
diff --git a/plat/st/common/stm32mp_dt.c b/plat/st/common/stm32mp_dt.c
index 2eaa9d9..0b6a0d3 100644
--- a/plat/st/common/stm32mp_dt.c
+++ b/plat/st/common/stm32mp_dt.c
@@ -21,7 +21,7 @@
 
 static int fdt_checked;
 
-static void *fdt = (void *)(uintptr_t)STM32MP1_DTB_BASE;
+static void *fdt = (void *)(uintptr_t)STM32MP_DTB_BASE;
 
 /*******************************************************************************
  * This function checks device tree file with its header.
diff --git a/plat/st/stm32mp1/bl2_plat_setup.c b/plat/st/stm32mp1/bl2_plat_setup.c
index 5525efd..beea69a 100644
--- a/plat/st/stm32mp1/bl2_plat_setup.c
+++ b/plat/st/stm32mp1/bl2_plat_setup.c
@@ -17,11 +17,11 @@
 #include <drivers/generic_delay_timer.h>
 #include <drivers/st/stm32_console.h>
 #include <drivers/st/stm32mp_pmic.h>
+#include <drivers/st/stm32mp_reset.h>
 #include <drivers/st/stm32mp1_clk.h>
 #include <drivers/st/stm32mp1_pwr.h>
 #include <drivers/st/stm32mp1_ram.h>
 #include <drivers/st/stm32mp1_rcc.h>
-#include <drivers/st/stm32mp1_reset.h>
 #include <lib/mmio.h>
 #include <lib/xlat_tables/xlat_tables_v2.h>
 #include <plat/common/platform.h>
@@ -120,7 +120,7 @@
 				  u_register_t arg2 __unused,
 				  u_register_t arg3 __unused)
 {
-	stm32mp1_save_boot_ctx_address(arg0);
+	stm32mp_save_boot_ctx_address(arg0);
 }
 
 void bl2_platform_setup(void)
@@ -146,7 +146,7 @@
 	struct dt_node_info dt_uart_info;
 	const char *board_model;
 	boot_api_context_t *boot_context =
-		(boot_api_context_t *)stm32mp1_get_boot_ctx_address();
+		(boot_api_context_t *)stm32mp_get_boot_ctx_address();
 	uint32_t clk_rate;
 
 	mmap_add_region(BL_CODE_BASE, BL_CODE_BASE,
@@ -159,9 +159,9 @@
 			MT_MEMORY | MT_RO | MT_SECURE);
 
 	/* Map non secure DDR for BL33 load and DDR training area restore */
-	mmap_add_region(STM32MP1_DDR_BASE,
-			STM32MP1_DDR_BASE,
-			STM32MP1_DDR_MAX_SIZE,
+	mmap_add_region(STM32MP_DDR_BASE,
+			STM32MP_DDR_BASE,
+			STM32MP_DDR_MAX_SIZE,
 			MT_MEMORY | MT_RW | MT_NS);
 
 	/* Prevent corruption of preloaded Device Tree */
@@ -221,19 +221,19 @@
 		goto skip_console_init;
 	}
 
-	if (stm32mp1_clk_enable((unsigned long)dt_uart_info.clock) != 0) {
+	if (stm32mp_clk_enable((unsigned long)dt_uart_info.clock) != 0) {
 		goto skip_console_init;
 	}
 
-	stm32mp1_reset_assert((uint32_t)dt_uart_info.reset);
+	stm32mp_reset_assert((uint32_t)dt_uart_info.reset);
 	udelay(2);
-	stm32mp1_reset_deassert((uint32_t)dt_uart_info.reset);
+	stm32mp_reset_deassert((uint32_t)dt_uart_info.reset);
 	mdelay(1);
 
-	clk_rate = stm32mp1_clk_get_rate((unsigned long)dt_uart_info.clock);
+	clk_rate = stm32mp_clk_get_rate((unsigned long)dt_uart_info.clock);
 
 	if (console_stm32_register(dt_uart_info.base, clk_rate,
-				   STM32MP1_UART_BAUDRATE, &console) == 0) {
+				   STM32MP_UART_BAUDRATE, &console) == 0) {
 		panic();
 	}
 
@@ -254,5 +254,5 @@
 
 	print_reset_reason();
 
-	stm32mp1_io_setup();
+	stm32mp_io_setup();
 }
diff --git a/plat/st/stm32mp1/include/platform_def.h b/plat/st/stm32mp1/include/platform_def.h
index 6d3d36d..5019b1a 100644
--- a/plat/st/stm32mp1/include/platform_def.h
+++ b/plat/st/stm32mp1/include/platform_def.h
@@ -29,8 +29,8 @@
 #define BL33_IMAGE_NAME			"ssbl"
 #define BL33_BINARY_TYPE		U(0x0)
 
-#define STM32MP1_PRIMARY_CPU		U(0x0)
-#define STM32MP1_SECONDARY_CPU		U(0x1)
+#define STM32MP_PRIMARY_CPU		U(0x0)
+#define STM32MP_SECONDARY_CPU		U(0x1)
 
 #define PLATFORM_CLUSTER_COUNT		ULL(1)
 #define PLATFORM_CLUSTER0_CORE_COUNT	U(2)
@@ -50,33 +50,33 @@
  * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
  * size plus a little space for growth.
  */
-#define BL2_BASE			STM32MP1_BL2_BASE
-#define BL2_LIMIT			(STM32MP1_BL2_BASE + \
-					 STM32MP1_BL2_SIZE)
+#define BL2_BASE			STM32MP_BL2_BASE
+#define BL2_LIMIT			(STM32MP_BL2_BASE + \
+					 STM32MP_BL2_SIZE)
 
 /*******************************************************************************
  * BL32 specific defines.
  ******************************************************************************/
-#define BL32_BASE			STM32MP1_BL32_BASE
-#define BL32_LIMIT			(STM32MP1_BL32_BASE + \
-					 STM32MP1_BL32_SIZE)
+#define BL32_BASE			STM32MP_BL32_BASE
+#define BL32_LIMIT			(STM32MP_BL32_BASE + \
+					 STM32MP_BL32_SIZE)
 
 /*******************************************************************************
  * BL33 specific defines.
  ******************************************************************************/
-#define BL33_BASE			STM32MP1_BL33_BASE
+#define BL33_BASE			STM32MP_BL33_BASE
 
 /*
  * Load address of BL33 for this platform port
  */
-#define PLAT_STM32MP1_NS_IMAGE_OFFSET	BL33_BASE
+#define PLAT_STM32MP_NS_IMAGE_OFFSET	BL33_BASE
 
 /*******************************************************************************
  * DTB specific defines.
  ******************************************************************************/
-#define DTB_BASE			STM32MP1_DTB_BASE
-#define DTB_LIMIT			(STM32MP1_DTB_BASE + \
-					 STM32MP1_DTB_SIZE)
+#define DTB_BASE			STM32MP_DTB_BASE
+#define DTB_LIMIT			(STM32MP_DTB_BASE + \
+					 STM32MP_DTB_SIZE)
 
 /*******************************************************************************
  * Platform specific page table and MMU setup constants
diff --git a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
index 6214194..0da93e4 100644
--- a/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
+++ b/plat/st/stm32mp1/plat_bl2_mem_params_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -50,7 +50,7 @@
 				      VERSION_2, entry_point_info_t,
 				      NON_SECURE | EXECUTABLE),
 
-		.ep_info.pc = PLAT_STM32MP1_NS_IMAGE_OFFSET,
+		.ep_info.pc = PLAT_STM32MP_NS_IMAGE_OFFSET,
 		.ep_info.spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
 					    SPSR_E_LITTLE,
 					    DISABLE_ALL_EXCEPTIONS),
@@ -58,9 +58,9 @@
 		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
 				      VERSION_2, image_info_t, 0),
 
-		.image_info.image_base = PLAT_STM32MP1_NS_IMAGE_OFFSET,
-		.image_info.image_max_size = STM32MP1_DDR_MAX_SIZE -
-			(PLAT_STM32MP1_NS_IMAGE_OFFSET - STM32MP1_DDR_BASE),
+		.image_info.image_base = PLAT_STM32MP_NS_IMAGE_OFFSET,
+		.image_info.image_max_size = STM32MP_DDR_MAX_SIZE -
+			(PLAT_STM32MP_NS_IMAGE_OFFSET - STM32MP_DDR_BASE),
 
 		.next_handoff_image_id = INVALID_IMAGE_ID,
 	}
diff --git a/plat/st/stm32mp1/sp_min/sp_min_setup.c b/plat/st/stm32mp1/sp_min/sp_min_setup.c
index f747ee7..329ff68 100644
--- a/plat/st/stm32mp1/sp_min/sp_min_setup.c
+++ b/plat/st/stm32mp1/sp_min/sp_min_setup.c
@@ -123,7 +123,7 @@
 
 	if ((result > 0) && (dt_uart_info.status != 0U)) {
 		if (console_stm32_register(dt_uart_info.base, 0,
-					   STM32MP1_UART_BAUDRATE, &console) ==
+					   STM32MP_UART_BAUDRATE, &console) ==
 		    0) {
 			panic();
 		}
diff --git a/plat/st/stm32mp1/stm32mp1.ld.S b/plat/st/stm32mp1/stm32mp1.ld.S
index a8e8220..c041fb6 100644
--- a/plat/st/stm32mp1/stm32mp1.ld.S
+++ b/plat/st/stm32mp1/stm32mp1.ld.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -17,7 +17,7 @@
 
 MEMORY {
 	HEADER (rw) : ORIGIN = 0x00000000, LENGTH = 0x3000
-	RAM (rwx) : ORIGIN = STM32MP1_BINARY_BASE, LENGTH = STM32MP1_BINARY_SIZE
+	RAM (rwx) : ORIGIN = STM32MP_BINARY_BASE, LENGTH = STM32MP_BINARY_SIZE
 }
 
 SECTIONS
@@ -32,7 +32,7 @@
         __HEADER_END__ = .;
     } >HEADER
 
-    . = STM32MP1_BINARY_BASE;
+    . = STM32MP_BINARY_BASE;
     .data . : {
         . = ALIGN(PAGE_SIZE);
         __DATA_START__ = .;
@@ -43,7 +43,7 @@
          * The strongest and only alignment contraint is MMU 4K page.
          * Indeed as images below will be removed, 4K pages will be re-used.
          */
-        . = ( STM32MP1_DTB_BASE - STM32MP1_BINARY_BASE );
+        . = ( STM32MP_DTB_BASE - STM32MP_BINARY_BASE );
         __DTB_IMAGE_START__ = .;
         *(.dtb_image*)
         __DTB_IMAGE_END__ = .;
@@ -53,7 +53,7 @@
          * The strongest and only alignment contraint is MMU 4K page.
          * Indeed as images below will be removed, 4K pages will be re-used.
          */
-        . = ( STM32MP1_BL2_BASE - STM32MP1_BINARY_BASE );
+        . = ( STM32MP_BL2_BASE - STM32MP_BINARY_BASE );
         __BL2_IMAGE_START__ = .;
         *(.bl2_image*)
         __BL2_IMAGE_END__ = .;
@@ -63,7 +63,7 @@
          * The strongest and only alignment constraint is 8 words to simplify
          * memraise8 assembly code.
          */
-        . = ( STM32MP1_BL32_BASE - STM32MP1_BINARY_BASE );
+        . = ( STM32MP_BL32_BASE - STM32MP_BINARY_BASE );
         __BL32_IMAGE_START__ = .;
         *(.bl32_image*)
         __BL32_IMAGE_END__ = .;
diff --git a/plat/st/stm32mp1/stm32mp1_context.c b/plat/st/stm32mp1/stm32mp1_context.c
index a8f9bf4..c402c20 100644
--- a/plat/st/stm32mp1/stm32mp1_context.c
+++ b/plat/st/stm32mp1/stm32mp1_context.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -23,9 +23,9 @@
 	uint32_t tamp_clk_off = 0;
 	uint32_t bkpr_itf_idx = tamp_bkpr(TAMP_BOOT_ITF_BACKUP_REG_ID);
 
-	if (!stm32mp1_clk_is_enabled(RTCAPB)) {
+	if (!stm32mp_clk_is_enabled(RTCAPB)) {
 		tamp_clk_off = 1;
-		if (stm32mp1_clk_enable(RTCAPB) != 0) {
+		if (stm32mp_clk_enable(RTCAPB) != 0) {
 			return -EINVAL;
 		}
 	}
@@ -36,7 +36,7 @@
 			   TAMP_BOOT_ITF_SHIFT);
 
 	if (tamp_clk_off != 0U) {
-		if (stm32mp1_clk_disable(RTCAPB) != 0) {
+		if (stm32mp_clk_disable(RTCAPB) != 0) {
 			return -EINVAL;
 		}
 	}
diff --git a/plat/st/stm32mp1/stm32mp1_def.h b/plat/st/stm32mp1/stm32mp1_def.h
index d12a93f..a456f26 100644
--- a/plat/st/stm32mp1/stm32mp1_def.h
+++ b/plat/st/stm32mp1/stm32mp1_def.h
@@ -22,14 +22,13 @@
  * STM32MP1 memory map related constants
  ******************************************************************************/
 
-#define STM32MP1_SRAM_BASE		U(0x2FFC0000)
-#define STM32MP1_SRAM_SIZE		U(0x00040000)
+#define STM32MP_SYSRAM_BASE		U(0x2FFC0000)
+#define STM32MP_SYSRAM_SIZE		U(0x00040000)
 
 /* DDR configuration */
-#define STM32MP1_DDR_BASE		U(0xC0000000)
-#define STM32MP1_DDR_SIZE_DFLT		U(0x20000000)	/* 512 MB */
-#define STM32MP1_DDR_MAX_SIZE		U(0x40000000)	/* Max 1GB */
-#define STM32MP1_DDR_SPEED_DFLT		528
+#define STM32MP_DDR_BASE		U(0xC0000000)
+#define STM32MP_DDR_MAX_SIZE		U(0x40000000)	/* Max 1GB */
+#define STM32MP_DDR_SPEED_DFLT		528
 
 /* DDR power initializations */
 #ifndef __ASSEMBLY__
@@ -40,36 +39,36 @@
 #endif
 
 /* Section used inside TF binaries */
-#define STM32MP1_PARAM_LOAD_SIZE	U(0x00002400)	/* 9 Ko for param */
+#define STM32MP_PARAM_LOAD_SIZE		U(0x00002400)	/* 9 Ko for param */
 /* 256 Octets reserved for header */
-#define STM32MP1_HEADER_SIZE		U(0x00000100)
+#define STM32MP_HEADER_SIZE		U(0x00000100)
 
-#define STM32MP1_BINARY_BASE		(STM32MP1_SRAM_BASE +		\
-					 STM32MP1_PARAM_LOAD_SIZE +	\
-					 STM32MP1_HEADER_SIZE)
+#define STM32MP_BINARY_BASE		(STM32MP_SYSRAM_BASE +		\
+					 STM32MP_PARAM_LOAD_SIZE +	\
+					 STM32MP_HEADER_SIZE)
 
-#define STM32MP1_BINARY_SIZE		(STM32MP1_SRAM_SIZE -		\
-					 (STM32MP1_PARAM_LOAD_SIZE +	\
-					  STM32MP1_HEADER_SIZE))
+#define STM32MP_BINARY_SIZE		(STM32MP_SYSRAM_SIZE -		\
+					 (STM32MP_PARAM_LOAD_SIZE +	\
+					  STM32MP_HEADER_SIZE))
 
 #if STACK_PROTECTOR_ENABLED
-#define STM32MP1_BL32_SIZE		U(0x00012000)	/* 72 Ko for BL32 */
+#define STM32MP_BL32_SIZE		U(0x00012000)	/* 72 Ko for BL32 */
 #else
-#define STM32MP1_BL32_SIZE		U(0x00011000)	/* 68 Ko for BL32 */
+#define STM32MP_BL32_SIZE		U(0x00011000)	/* 68 Ko for BL32 */
 #endif
 
-#define STM32MP1_BL32_BASE		(STM32MP1_SRAM_BASE + \
-					 STM32MP1_SRAM_SIZE - \
-					 STM32MP1_BL32_SIZE)
+#define STM32MP_BL32_BASE		(STM32MP_SYSRAM_BASE + \
+					 STM32MP_SYSRAM_SIZE - \
+					 STM32MP_BL32_SIZE)
 
 #if STACK_PROTECTOR_ENABLED
-#define STM32MP1_BL2_SIZE		U(0x00015000)	/* 84 Ko for BL2 */
+#define STM32MP_BL2_SIZE		U(0x00015000)	/* 84 Ko for BL2 */
 #else
-#define STM32MP1_BL2_SIZE		U(0x00013000)	/* 76 Ko for BL2 */
+#define STM32MP_BL2_SIZE		U(0x00013000)	/* 76 Ko for BL2 */
 #endif
 
-#define STM32MP1_BL2_BASE		(STM32MP1_BL32_BASE - \
-					 STM32MP1_BL2_SIZE)
+#define STM32MP_BL2_BASE		(STM32MP_BL32_BASE - \
+					 STM32MP_BL2_SIZE)
 
 /* BL2 and BL32/sp_min require 5 tables */
 #define MAX_XLAT_TABLES			5
@@ -86,12 +85,12 @@
 #endif
 
 /* DTB initialization value */
-#define STM32MP1_DTB_SIZE		U(0x00004000)	/* 16Ko for DTB */
+#define STM32MP_DTB_SIZE		U(0x00004000)	/* 16Ko for DTB */
 
-#define STM32MP1_DTB_BASE		(STM32MP1_BL2_BASE - \
-					 STM32MP1_DTB_SIZE)
+#define STM32MP_DTB_BASE		(STM32MP_BL2_BASE - \
+					 STM32MP_DTB_SIZE)
 
-#define STM32MP1_BL33_BASE		(STM32MP1_DDR_BASE + U(0x100000))
+#define STM32MP_BL33_BASE		(STM32MP_DDR_BASE + U(0x100000))
 
 /*******************************************************************************
  * STM32MP1 device/io map related constants (used for MMU)
@@ -156,12 +155,12 @@
 #define USART6_BASE			U(0x44003000)
 #define UART7_BASE			U(0x40018000)
 #define UART8_BASE			U(0x40019000)
-#define STM32MP1_UART_BAUDRATE		U(115200)
+#define STM32MP_UART_BAUDRATE		U(115200)
 
 /* For UART crash console */
-#define STM32MP1_DEBUG_USART_BASE	UART4_BASE
+#define STM32MP_DEBUG_USART_BASE	UART4_BASE
 /* UART4 on HSI@64MHz, TX on GPIOG11 Alternate 6 */
-#define STM32MP1_DEBUG_USART_CLK_FRQ	64000000
+#define STM32MP_DEBUG_USART_CLK_FRQ	64000000
 #define DEBUG_UART_TX_GPIO_BANK_ADDRESS	GPIOG_BASE
 #define DEBUG_UART_TX_GPIO_BANK_CLK_REG	RCC_MP_AHB4ENSETR
 #define DEBUG_UART_TX_GPIO_BANK_CLK_EN	RCC_MP_AHB4ENSETR_GPIOGEN
@@ -193,15 +192,15 @@
 /*******************************************************************************
  * STM32MP1 SDMMC
  ******************************************************************************/
-#define STM32MP1_SDMMC1_BASE		U(0x58005000)
-#define STM32MP1_SDMMC2_BASE		U(0x58007000)
-#define STM32MP1_SDMMC3_BASE		U(0x48004000)
+#define STM32MP_SDMMC1_BASE		U(0x58005000)
+#define STM32MP_SDMMC2_BASE		U(0x58007000)
+#define STM32MP_SDMMC3_BASE		U(0x48004000)
 
-#define STM32MP1_MMC_INIT_FREQ			400000		/*400 KHz*/
-#define STM32MP1_SD_NORMAL_SPEED_MAX_FREQ	25000000	/*25 MHz*/
-#define STM32MP1_SD_HIGH_SPEED_MAX_FREQ		50000000	/*50 MHz*/
-#define STM32MP1_EMMC_NORMAL_SPEED_MAX_FREQ	26000000	/*26 MHz*/
-#define STM32MP1_EMMC_HIGH_SPEED_MAX_FREQ	52000000	/*52 MHz*/
+#define STM32MP_MMC_INIT_FREQ			400000		/*400 KHz*/
+#define STM32MP_SD_NORMAL_SPEED_MAX_FREQ	25000000	/*25 MHz*/
+#define STM32MP_SD_HIGH_SPEED_MAX_FREQ		50000000	/*50 MHz*/
+#define STM32MP_EMMC_NORMAL_SPEED_MAX_FREQ	26000000	/*26 MHz*/
+#define STM32MP_EMMC_HIGH_SPEED_MAX_FREQ	52000000	/*52 MHz*/
 
 /*******************************************************************************
  * STM32MP1 BSEC / OTP
diff --git a/plat/st/stm32mp1/stm32mp1_helper.S b/plat/st/stm32mp1/stm32mp1_helper.S
index 8c2e1b6..c675965 100644
--- a/plat/st/stm32mp1/stm32mp1_helper.S
+++ b/plat/st/stm32mp1/stm32mp1_helper.S
@@ -74,7 +74,7 @@
 	ldcopr	r0, MPIDR
 	ldr	r1, =(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
 	and	r0, r1
-	cmp	r0, #STM32MP1_PRIMARY_CPU
+	cmp	r0, #STM32MP_PRIMARY_CPU
 	moveq	r0, #1
 	movne	r0, #0
 	bx	lr
@@ -143,9 +143,9 @@
 	orr	r2, r2, #DEBUG_UART_TX_EN
 	str	r2, [r1]
 
-	ldr	r0, =STM32MP1_DEBUG_USART_BASE
-	ldr	r1, =STM32MP1_DEBUG_USART_CLK_FRQ
-	ldr	r2, =STM32MP1_UART_BAUDRATE
+	ldr	r0, =STM32MP_DEBUG_USART_BASE
+	ldr	r1, =STM32MP_DEBUG_USART_CLK_FRQ
+	ldr	r2, =STM32MP_UART_BAUDRATE
 	b	console_stm32_core_init
 endfunc plat_crash_console_init
 
@@ -156,7 +156,7 @@
 	 * ---------------------------------------------
 	 */
 func plat_crash_console_flush
-	ldr	r1, =STM32MP1_DEBUG_USART_BASE
+	ldr	r1, =STM32MP_DEBUG_USART_BASE
 	b	console_stm32_core_flush
 endfunc plat_crash_console_flush
 
@@ -172,6 +172,6 @@
 	 * ---------------------------------------------
 	 */
 func plat_crash_console_putc
-	ldr	r1, =STM32MP1_DEBUG_USART_BASE
+	ldr	r1, =STM32MP_DEBUG_USART_BASE
 	b	console_stm32_core_putc
 endfunc plat_crash_console_putc
diff --git a/plat/st/stm32mp1/stm32mp1_pm.c b/plat/st/stm32mp1/stm32mp1_pm.c
index 20f66e9..18921ef 100644
--- a/plat/st/stm32mp1/stm32mp1_pm.c
+++ b/plat/st/stm32mp1/stm32mp1_pm.c
@@ -70,15 +70,15 @@
 		return PSCI_E_INVALID_PARAMS;
 	}
 
-	if ((stm32_sec_entrypoint < STM32MP1_SRAM_BASE) ||
-	    (stm32_sec_entrypoint > (STM32MP1_SRAM_BASE +
-				     (STM32MP1_SRAM_SIZE - 1)))) {
+	if ((stm32_sec_entrypoint < STM32MP_SYSRAM_BASE) ||
+	    (stm32_sec_entrypoint > (STM32MP_SYSRAM_BASE +
+				     (STM32MP_SYSRAM_SIZE - 1)))) {
 		return PSCI_E_INVALID_ADDRESS;
 	}
 
-	if (!stm32mp1_clk_is_enabled(RTCAPB)) {
+	if (!stm32mp_clk_is_enabled(RTCAPB)) {
 		tamp_clk_off = 1;
-		if (stm32mp1_clk_enable(RTCAPB) != 0) {
+		if (stm32mp_clk_enable(RTCAPB) != 0) {
 			panic();
 		}
 	}
@@ -92,13 +92,13 @@
 	mmio_write_32(bkpr_core1_magic, BOOT_API_A7_CORE1_MAGIC_NUMBER);
 
 	if (tamp_clk_off != 0U) {
-		if (stm32mp1_clk_disable(RTCAPB) != 0) {
+		if (stm32mp_clk_disable(RTCAPB) != 0) {
 			panic();
 		}
 	}
 
 	/* Generate an IT to core 1 */
-	gicv2_raise_sgi(ARM_IRQ_SEC_SGI_0, STM32MP1_SECONDARY_CPU);
+	gicv2_raise_sgi(ARM_IRQ_SEC_SGI_0, STM32MP_SECONDARY_CPU);
 
 	return PSCI_E_SUCCESS;
 }
@@ -194,7 +194,7 @@
 static int stm32_validate_ns_entrypoint(uintptr_t entrypoint)
 {
 	/* The non-secure entry point must be in DDR */
-	if (entrypoint < STM32MP1_DDR_BASE) {
+	if (entrypoint < STM32MP_DDR_BASE) {
 		return PSCI_E_INVALID_ADDRESS;
 	}
 
diff --git a/plat/st/stm32mp1/stm32mp1_private.c b/plat/st/stm32mp1/stm32mp1_private.c
index f3beb59..20eb88e 100644
--- a/plat/st/stm32mp1/stm32mp1_private.c
+++ b/plat/st/stm32mp1/stm32mp1_private.c
@@ -8,8 +8,8 @@
 
 #include <lib/xlat_tables/xlat_tables_v2.h>
 
-#define MAP_SRAM	MAP_REGION_FLAT(STM32MP1_SRAM_BASE, \
-					STM32MP1_SRAM_SIZE, \
+#define MAP_SRAM	MAP_REGION_FLAT(STM32MP_SYSRAM_BASE, \
+					STM32MP_SYSRAM_SIZE, \
 					MT_MEMORY | \
 					MT_RW | \
 					MT_SECURE | \
diff --git a/plat/st/stm32mp1/stm32mp1_security.c b/plat/st/stm32mp1/stm32mp1_security.c
index 99719e4..bb66b4b 100644
--- a/plat/st/stm32mp1/stm32mp1_security.c
+++ b/plat/st/stm32mp1/stm32mp1_security.c
@@ -22,7 +22,7 @@
 static void init_tzc400(void)
 {
 	unsigned long long region_base, region_top;
-	unsigned long long ddr_base = STM32MP1_DDR_BASE;
+	unsigned long long ddr_base = STM32MP_DDR_BASE;
 	unsigned long long ddr_size = (unsigned long long)dt_get_ddr_size();
 
 	tzc400_init(STM32MP1_TZC_BASE);
@@ -62,11 +62,11 @@
  ******************************************************************************/
 static void early_init_tzc400(void)
 {
-	if (stm32mp1_clk_enable(TZC1) != 0) {
+	if (stm32mp_clk_enable(TZC1) != 0) {
 		ERROR("Cannot enable TZC1 clock\n");
 		panic();
 	}
-	if (stm32mp1_clk_enable(TZC2) != 0) {
+	if (stm32mp_clk_enable(TZC2) != 0) {
 		ERROR("Cannot enable TZC2 clock\n");
 		panic();
 	}
@@ -80,9 +80,9 @@
 	 * same configuration to all filters in the TZC.
 	 */
 	tzc400_configure_region(STM32MP1_FILTER_BIT_ALL, 1,
-				STM32MP1_DDR_BASE,
-				STM32MP1_DDR_BASE +
-				(STM32MP1_DDR_MAX_SIZE - 1U),
+				STM32MP_DDR_BASE,
+				STM32MP_DDR_BASE +
+				(STM32MP_DDR_MAX_SIZE - 1U),
 				TZC_REGION_S_RDWR,
 				TZC_REGION_ACCESS_RDWR(STM32MP1_TZC_A7_ID) |
 				TZC_REGION_ACCESS_RDWR(STM32MP1_TZC_SDMMC_ID));