diff --git a/drivers/st/ddr/stm32mp1_ddr.c b/drivers/st/ddr/stm32mp1_ddr.c
index 79aff6e..b934754 100644
--- a/drivers/st/ddr/stm32mp1_ddr.c
+++ b/drivers/st/ddr/stm32mp1_ddr.c
@@ -639,7 +639,7 @@
 	 */
 
 	/* Change Bypass Mode Frequency Range */
-	if (stm32mp1_clk_get_rate(DDRPHYC) < 100000000U) {
+	if (stm32mp_clk_get_rate(DDRPHYC) < 100000000U) {
 		mmio_clrbits_32((uintptr_t)&priv->phy->dllgcr,
 				DDRPHYC_DLLGCR_BPS200);
 	} else {
diff --git a/drivers/st/ddr/stm32mp1_ram.c b/drivers/st/ddr/stm32mp1_ram.c
index e65fbea..532062e 100644
--- a/drivers/st/ddr/stm32mp1_ram.c
+++ b/drivers/st/ddr/stm32mp1_ram.c
@@ -31,7 +31,7 @@
 
 	ddr_enable_clock();
 
-	ddrphy_clk = stm32mp1_clk_get_rate(DDRPHYC);
+	ddrphy_clk = stm32mp_clk_get_rate(DDRPHYC);
 
 	VERBOSE("DDR: mem_speed (%d kHz), RCC %ld kHz\n",
 		mem_speed, ddrphy_clk / 1000U);
@@ -65,10 +65,10 @@
 	uint32_t pattern;
 
 	for (pattern = 1U; pattern != 0U; pattern <<= 1) {
-		mmio_write_32(STM32MP1_DDR_BASE, pattern);
+		mmio_write_32(STM32MP_DDR_BASE, pattern);
 
-		if (mmio_read_32(STM32MP1_DDR_BASE) != pattern) {
-			return (uint32_t)STM32MP1_DDR_BASE;
+		if (mmio_read_32(STM32MP_DDR_BASE) != pattern) {
+			return (uint32_t)STM32MP_DDR_BASE;
 		}
 	}
 
@@ -92,44 +92,44 @@
 	/* Write the default pattern at each of the power-of-two offsets. */
 	for (offset = sizeof(uint32_t); (offset & addressmask) != 0U;
 	     offset <<= 1) {
-		mmio_write_32(STM32MP1_DDR_BASE + (uint32_t)offset,
+		mmio_write_32(STM32MP_DDR_BASE + (uint32_t)offset,
 			      DDR_PATTERN);
 	}
 
 	/* Check for address bits stuck high. */
-	mmio_write_32(STM32MP1_DDR_BASE + (uint32_t)testoffset,
+	mmio_write_32(STM32MP_DDR_BASE + (uint32_t)testoffset,
 		      DDR_ANTIPATTERN);
 
 	for (offset = sizeof(uint32_t); (offset & addressmask) != 0U;
 	     offset <<= 1) {
-		if (mmio_read_32(STM32MP1_DDR_BASE + (uint32_t)offset) !=
+		if (mmio_read_32(STM32MP_DDR_BASE + (uint32_t)offset) !=
 		    DDR_PATTERN) {
-			return (uint32_t)(STM32MP1_DDR_BASE + offset);
+			return (uint32_t)(STM32MP_DDR_BASE + offset);
 		}
 	}
 
-	mmio_write_32(STM32MP1_DDR_BASE + (uint32_t)testoffset, DDR_PATTERN);
+	mmio_write_32(STM32MP_DDR_BASE + (uint32_t)testoffset, DDR_PATTERN);
 
 	/* Check for address bits stuck low or shorted. */
 	for (testoffset = sizeof(uint32_t); (testoffset & addressmask) != 0U;
 	     testoffset <<= 1) {
-		mmio_write_32(STM32MP1_DDR_BASE + (uint32_t)testoffset,
+		mmio_write_32(STM32MP_DDR_BASE + (uint32_t)testoffset,
 			      DDR_ANTIPATTERN);
 
-		if (mmio_read_32(STM32MP1_DDR_BASE) != DDR_PATTERN) {
-			return STM32MP1_DDR_BASE;
+		if (mmio_read_32(STM32MP_DDR_BASE) != DDR_PATTERN) {
+			return STM32MP_DDR_BASE;
 		}
 
 		for (offset = sizeof(uint32_t); (offset & addressmask) != 0U;
 		     offset <<= 1) {
-			if ((mmio_read_32(STM32MP1_DDR_BASE +
+			if ((mmio_read_32(STM32MP_DDR_BASE +
 					  (uint32_t)offset) != DDR_PATTERN) &&
 			    (offset != testoffset)) {
-				return (uint32_t)(STM32MP1_DDR_BASE + offset);
+				return (uint32_t)(STM32MP_DDR_BASE + offset);
 			}
 		}
 
-		mmio_write_32(STM32MP1_DDR_BASE + (uint32_t)testoffset,
+		mmio_write_32(STM32MP_DDR_BASE + (uint32_t)testoffset,
 			      DDR_PATTERN);
 	}
 
@@ -147,13 +147,13 @@
 {
 	uint32_t offset = sizeof(uint32_t);
 
-	mmio_write_32(STM32MP1_DDR_BASE, DDR_PATTERN);
+	mmio_write_32(STM32MP_DDR_BASE, DDR_PATTERN);
 
-	while (offset < STM32MP1_DDR_MAX_SIZE) {
-		mmio_write_32(STM32MP1_DDR_BASE + offset, DDR_ANTIPATTERN);
+	while (offset < STM32MP_DDR_MAX_SIZE) {
+		mmio_write_32(STM32MP_DDR_BASE + offset, DDR_ANTIPATTERN);
 		dsb();
 
-		if (mmio_read_32(STM32MP1_DDR_BASE) != DDR_PATTERN) {
+		if (mmio_read_32(STM32MP_DDR_BASE) != DDR_PATTERN) {
 			break;
 		}
 
@@ -240,15 +240,15 @@
 		}
 	}
 
-	if (!stm32mp1_clk_is_enabled(RTCAPB)) {
+	if (!stm32mp_clk_is_enabled(RTCAPB)) {
 		tamp_clk_off = 1;
-		if (stm32mp1_clk_enable(RTCAPB) != 0) {
+		if (stm32mp_clk_enable(RTCAPB) != 0) {
 			return -EINVAL;
 		}
 	}
 
 	if (tamp_clk_off != 0U) {
-		if (stm32mp1_clk_disable(RTCAPB) != 0) {
+		if (stm32mp_clk_disable(RTCAPB) != 0) {
 			return -EINVAL;
 		}
 	}
@@ -306,7 +306,7 @@
 	priv->pwr = PWR_BASE;
 	priv->rcc = RCC_BASE;
 
-	priv->info.base = STM32MP1_DDR_BASE;
+	priv->info.base = STM32MP_DDR_BASE;
 	priv->info.size = 0;
 
 	return stm32mp1_ddr_setup();