Poplar: Initial commit for Poplar E-96Boards
The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.
SOC Hisilicon Hi3798CV200
CPU Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB Two USB 2.0 ports One USB 3.0 ports
CONSOLE USB-micro port for console support
ETHERNET 1 GBe Ethernet
PCIE One PCIe 2.0 interfaces
JTAG 8-Pin JTAG
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI 802.11AC 2*2 with Bluetooth
CONNECTORS One connector for Smart Card One connector for TSI
The platform boot sequence is as follows:
l-loader --> arm_trusted_firmware --> u-boot
Repositories:
- https://github.com/Linaro/poplar-l-loader.git
- https://github.com/Linaro/poplar-u-boot.git
U-Boot is also upstream in the project's master branch.
Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).
Build Line:
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
diff --git a/plat/hisilicon/poplar/plat_storage.c b/plat/hisilicon/poplar/plat_storage.c
new file mode 100644
index 0000000..623a61b
--- /dev/null
+++ b/plat/hisilicon/poplar/plat_storage.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <firmware_image_package.h>
+#include <io_block.h>
+#include <io_driver.h>
+#include <io_fip.h>
+#include <io_memmap.h>
+#include <io_storage.h>
+#include <mmio.h>
+#include <partition/partition.h>
+#include <semihosting.h>
+#include <string.h>
+#include <tbbr_img_def.h>
+#include <utils.h>
+#include "platform_def.h"
+
+static const io_dev_connector_t *mmap_dev_con;
+static const io_dev_connector_t *fip_dev_con;
+
+static uintptr_t mmap_dev_handle;
+static uintptr_t fip_dev_handle;
+
+static int open_mmap(const uintptr_t spec);
+static int open_fip(const uintptr_t spec);
+
+static const io_block_spec_t loader_fip_spec = {
+ .offset = FIP_BASE,
+ .length = FIP_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+ .uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+ .uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+ .uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+struct plat_io_policy {
+ uintptr_t *dev_handle;
+ uintptr_t image_spec;
+ int (*check)(const uintptr_t spec);
+};
+
+static const struct plat_io_policy policies[] = {
+ [FIP_IMAGE_ID] = {
+ &mmap_dev_handle,
+ (uintptr_t)&loader_fip_spec,
+ open_mmap
+ },
+ [BL2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl2_uuid_spec,
+ open_fip
+ },
+ [BL31_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl31_uuid_spec,
+ open_fip
+ },
+ [BL33_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl33_uuid_spec,
+ open_fip
+ },
+};
+
+static int open_mmap(const uintptr_t spec)
+{
+ int result;
+ uintptr_t local_image_handle;
+
+ result = io_dev_init(mmap_dev_handle, (uintptr_t)NULL);
+ if (result == 0) {
+ result = io_open(mmap_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ io_close(local_image_handle);
+ }
+ }
+ return result;
+}
+
+static int open_fip(const uintptr_t spec)
+{
+ uintptr_t local_image_handle;
+ int result;
+
+ result = io_dev_init(fip_dev_handle, (uintptr_t) FIP_IMAGE_ID);
+ if (result == 0) {
+ result = io_open(fip_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ io_close(local_image_handle);
+ } else {
+ VERBOSE("error opening fip\n");
+ }
+ } else {
+ VERBOSE("error initializing fip\n");
+ }
+
+ return result;
+}
+
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+ uintptr_t *image_spec)
+{
+ const struct plat_io_policy *policy;
+ int result;
+
+ assert(image_id < ARRAY_SIZE(policies));
+
+ policy = &policies[image_id];
+ result = policy->check(policy->image_spec);
+ assert(result == 0);
+
+ *image_spec = policy->image_spec;
+ *dev_handle = *(policy->dev_handle);
+
+ return result;
+}
+
+void plat_io_setup(void)
+{
+ int result;
+
+ result = register_io_dev_memmap(&mmap_dev_con);
+ assert(result == 0);
+
+ result = register_io_dev_fip(&fip_dev_con);
+ assert(result == 0);
+
+ result = io_dev_open(fip_dev_con, (uintptr_t)&loader_fip_spec,
+ &fip_dev_handle);
+ assert(result == 0);
+
+ result = io_dev_open(mmap_dev_con, (uintptr_t)NULL, &mmap_dev_handle);
+ assert(result == 0);
+
+ (void) result;
+}