diff --git a/plat/hisilicon/poplar/include/hi3798cv200.h b/plat/hisilicon/poplar/include/hi3798cv200.h
new file mode 100644
index 0000000..6318b9c
--- /dev/null
+++ b/plat/hisilicon/poplar/include/hi3798cv200.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __HI3798cv200_H__
+#define __HI3798cv200_H__
+
+/* PL011 */
+#define PL011_UART0_BASE		(0xF8B00000)
+#define PL011_BAUDRATE			(115200)
+#define PL011_UART0_CLK_IN_HZ		(75000000)
+
+/* Sys Counter */
+#define SYS_COUNTER_FREQ_IN_TICKS	(24000000)
+#define SYS_COUNTER_FREQ_IN_MHZ		(24)
+
+/* Timer */
+#define SEC_TIMER0_BASE			(0xF8008000)
+#define TIMER00_LOAD			(SEC_TIMER0_BASE + 0x000)
+#define TIMER00_VALUE			(SEC_TIMER0_BASE + 0x004)
+#define TIMER00_CONTROL			(SEC_TIMER0_BASE + 0x008)
+#define TIMER00_BGLOAD			(SEC_TIMER0_BASE + 0x018)
+
+#define SEC_TIMER2_BASE			(0xF8009000)
+#define TIMER20_LOAD			(SEC_TIMER2_BASE + 0x000)
+#define TIMER20_VALUE			(SEC_TIMER2_BASE + 0x004)
+#define TIMER20_CONTROL			(SEC_TIMER2_BASE + 0x008)
+#define TIMER20_BGLOAD			(SEC_TIMER2_BASE + 0x018)
+
+/* GPIO */
+#define	GPIO_MAX			(12)
+#define	GPIO_BASE(x)			(x != 5 ?			\
+					0xf820000 + x * 0x1000 : 0xf8004000)
+
+/* SCTL */
+#define REG_BASE_SCTL			(0xF8000000)
+#define REG_SC_GEN12			(0x00B0)
+
+/* CRG */
+#define REG_BASE_CRG			(0xF8A22000)
+#define REG_CPU_LP			(0x48)
+#define REG_CPU_RST			(0x50)
+#define REG_PERI_CRG39			(0x9C)
+#define REG_PERI_CRG40			(0xA0)
+
+/* MCI */
+#define REG_BASE_MCI			(0xF9830000)
+#define MCI_CDETECT			(0x50)
+#define MCI_VERID			(0x6C)
+#define MCI_VERID_VALUE			(0x5342250A)
+#define MCI_VERID_VALUE2		(0x5342270A)
+
+/* EMMC */
+#define REG_EMMC_PERI_CRG		REG_PERI_CRG40
+#define REG_SDCARD_PERI_CRG		REG_PERI_CRG39
+#define EMMC_CLK_MASK			(0x7 << 8)
+#define EMMC_SRST_REQ			(0x1 << 4)
+#define EMMC_CKEN			(0x1 << 1)
+#define EMMC_BUS_CKEN			(0x1 << 0)
+#define EMMC_CLK_100M			(0 << 8)
+#define EMMC_CLK_50M			(1 << 8)
+#define EMMC_CLK_25M			(2 << 8)
+
+#define EMMC_DESC_SIZE			(0xF0000)
+#define EMMC_INIT_PARAMS(base)				\
+	{	.bus_width = EMMC_BUS_WIDTH_8,		\
+		.clk_rate = 25 * 1000 * 1000,		\
+		.desc_base = (base) - EMMC_DESC_SIZE,	\
+		.desc_size = EMMC_DESC_SIZE,		\
+		.flags =  EMMC_FLAG_CMD23,		\
+		.reg_base = REG_BASE_MCI,		\
+	}
+
+/* GIC-400 */
+#define GICD_BASE			(0xF1001000)
+#define GICC_BASE			(0xF1002000)
+#define GICR_BASE			(0xF1000000)
+
+/* FIQ platform related define */
+#define HISI_IRQ_SEC_SGI_0		8
+#define HISI_IRQ_SEC_SGI_1		9
+#define HISI_IRQ_SEC_SGI_2		10
+#define HISI_IRQ_SEC_SGI_3		11
+#define HISI_IRQ_SEC_SGI_4		12
+#define HISI_IRQ_SEC_SGI_5		13
+#define HISI_IRQ_SEC_SGI_6		14
+#define HISI_IRQ_SEC_SGI_7		15
+#define HISI_IRQ_SEC_PPI_0		29
+#define HISI_IRQ_SEC_TIMER0		60
+#define HISI_IRQ_SEC_TIMER1		50
+#define HISI_IRQ_SEC_TIMER2		52
+#define HISI_IRQ_SEC_TIMER3		88
+#define HISI_IRQ_SEC_AXI		110
+
+/* Watchdog */
+#define HISI_WDG0_BASE			(0xF8A2C000)
+
+#endif	/* __HI3798cv200_H__ */