feat(ls1088aqds): add ls1088aqds board support
Add QDS support for ls1088a.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6c7a7a23fa6b9ba01c011a7e6237f8063d45e261
diff --git a/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
new file mode 100644
index 0000000..b7397ba
--- /dev/null
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+ {U(1600), U(8), U(8)},
+ {U(1867), U(8), U(8)},
+ {U(2134), U(8), U(9)},
+ {}
+};
+
+static const struct board_timing udimm[] = {
+ {U(0x04), rce, U(0x01020307), U(0x08090b06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+ int ret;
+ struct memctl_opt *popts = &priv->opt;
+
+ if (popts->rdimm != 0) {
+ debug("RDIMM parameters not set.\n");
+ return -EINVAL;
+ }
+
+ ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+ if (ret != 0) {
+ return ret;
+ }
+
+ popts->addr_hash = 1;
+ popts->cpo_sample = U(0x7b);
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_TRAIN_EN |
+ DDR_CDR2_VREF_RANGE_2;
+
+ return 0;
+}
+
+long long init_ddr(void)
+{
+ int spd_addr[] = { NXP_SPD_EEPROM0 };
+ struct ddr_info info;
+ struct sysinfo sys;
+ long long dram_size;
+
+ zeromem(&sys, sizeof(sys));
+ get_clocks(&sys);
+ debug("platform clock %lu\n", sys.freq_platform);
+ debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+ zeromem(&info, sizeof(struct ddr_info));
+ info.num_ctlrs = NUM_OF_DDRC;
+ info.dimm_on_ctlr = DDRC_NUM_DIMM;
+ info.clk = get_ddr_freq(&sys, 0);
+ info.spd_addr = spd_addr;
+ info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+ dram_size = dram_init(&info);
+ if (dram_size < 0) {
+ ERROR("DDR init failed.\n");
+ }
+
+ erratum_a008850_post();
+
+ return dram_size;
+}