diff --git a/plat/intel/soc/agilex/bl2_plat_setup.c b/plat/intel/soc/agilex/bl2_plat_setup.c
index e9ab928..fa9a6a5 100644
--- a/plat/intel/soc/agilex/bl2_plat_setup.c
+++ b/plat/intel/soc/agilex/bl2_plat_setup.c
@@ -18,7 +18,6 @@
 #include <socfpga_private.h>
 
 #include "agilex_clock_manager.h"
-#include "agilex_handoff.h"
 #include "agilex_mailbox.h"
 #include "agilex_memory_controller.h"
 #include "agilex_pinmux.h"
@@ -28,6 +27,7 @@
 
 #include "ccu/ncore_ccu.h"
 #include "qspi/cadence_qspi.h"
+#include "socfpga_handoff.h"
 #include "wdt/watchdog.h"
 
 
@@ -59,7 +59,7 @@
 
 	generic_delay_timer_init();
 
-	if (agilex_get_handoff(&reverse_handoff_ptr))
+	if (socfpga_get_handoff(&reverse_handoff_ptr))
 		return;
 	config_pinmux(&reverse_handoff_ptr);
 	boot_source = reverse_handoff_ptr.boot_source;
diff --git a/plat/intel/soc/agilex/bl31_plat_setup.c b/plat/intel/soc/agilex/bl31_plat_setup.c
index c8765e8..e7852cf 100644
--- a/plat/intel/soc/agilex/bl31_plat_setup.c
+++ b/plat/intel/soc/agilex/bl31_plat_setup.c
@@ -67,15 +67,15 @@
 }
 
 static const interrupt_prop_t s10_interrupt_props[] = {
-	PLAT_INTEL_AGX_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
-	PLAT_INTEL_AGX_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
+	PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
+	PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
 };
 
 static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
 
 static const gicv2_driver_data_t plat_gicv2_gic_data = {
-	.gicd_base = PLAT_INTEL_AGX_GICD_BASE,
-	.gicc_base = PLAT_INTEL_AGX_GICC_BASE,
+	.gicd_base = PLAT_INTEL_SOCFPGA_GICD_BASE,
+	.gicc_base = PLAT_INTEL_SOCFPGA_GICC_BASE,
 	.interrupt_props = s10_interrupt_props,
 	.interrupt_props_num = ARRAY_SIZE(s10_interrupt_props),
 	.target_masks = target_mask_array,
diff --git a/plat/intel/soc/agilex/include/agilex_clock_manager.h b/plat/intel/soc/agilex/include/agilex_clock_manager.h
index 0822290..8af6a60 100644
--- a/plat/intel/soc/agilex/include/agilex_clock_manager.h
+++ b/plat/intel/soc/agilex/include/agilex_clock_manager.h
@@ -7,7 +7,7 @@
 #ifndef CLOCKMANAGER_H
 #define CLOCKMANAGER_H
 
-#include "agilex_handoff.h"
+#include "socfpga_handoff.h"
 
 /* Clock Manager Registers */
 #define CLKMGR_OFFSET				0xffd10000
diff --git a/plat/intel/soc/agilex/include/agilex_handoff.h b/plat/intel/soc/agilex/include/agilex_handoff.h
deleted file mode 100644
index 2016406..0000000
--- a/plat/intel/soc/agilex/include/agilex_handoff.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (c) 2019, Intel Corporation. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef	HANDOFF_H
-#define	HANDOFF_H
-
-#define HANDOFF_MAGIC_HEADER		0x424f4f54	/* BOOT */
-#define HANDOFF_MAGIC_PINMUX_SEL	0x504d5558	/* PMUX */
-#define HANDOFF_MAGIC_IOCTLR		0x494f4354	/* IOCT */
-#define HANDOFF_MAGIC_FPGA		0x46504741	/* FPGA */
-#define HANDOFF_MAGIC_IODELAY		0x444c4159	/* DLAY */
-#define HANDOFF_MAGIC_CLOCK		0x434c4b53	/* CLKS */
-#define HANDOFF_MAGIC_MISC		0x4d495343	/* MISC */
-
-typedef struct handoff_t {
-	/* header */
-	uint32_t	header_magic;
-	uint32_t	header_device;
-	uint32_t	_pad_0x08_0x10[2];
-
-	/* pinmux configuration - select */
-	uint32_t	pinmux_sel_magic;
-	uint32_t	pinmux_sel_length;
-	uint32_t	_pad_0x18_0x20[2];
-	uint32_t	pinmux_sel_array[96];	/* offset, value */
-
-	/* pinmux configuration - io control */
-	uint32_t	pinmux_io_magic;
-	uint32_t	pinmux_io_length;
-	uint32_t	_pad_0x1a8_0x1b0[2];
-	uint32_t	pinmux_io_array[96];	/* offset, value */
-
-	/* pinmux configuration - use fpga switch */
-	uint32_t	pinmux_fpga_magic;
-	uint32_t	pinmux_fpga_length;
-	uint32_t	_pad_0x338_0x340[2];
-	uint32_t	pinmux_fpga_array[42];	/* offset, value */
-	uint32_t	_pad_0x3e8_0x3f0[2];
-
-	/* pinmux configuration - io delay */
-	uint32_t	pinmux_delay_magic;
-	uint32_t	pinmux_delay_length;
-	uint32_t	_pad_0x3f8_0x400[2];
-	uint32_t	pinmux_iodelay_array[96];	/* offset, value */
-
-	/* clock configuration */
-	uint32_t	clock_magic;
-	uint32_t	clock_length;
-	uint32_t	_pad_0x588_0x590[2];
-	uint32_t	main_pll_mpuclk;
-	uint32_t	main_pll_nocclk;
-	uint32_t	main_pll_nocdiv;
-	uint32_t	main_pll_pllglob;
-	uint32_t	main_pll_fdbck;
-	uint32_t	main_pll_pllc0;
-	uint32_t	main_pll_pllc1;
-	uint32_t	main_pll_pllc2;
-	uint32_t	main_pll_pllc3;
-	uint32_t	main_pll_pllm;
-	uint32_t	per_pll_emacctl;
-	uint32_t	per_pll_gpiodiv;
-	uint32_t	per_pll_pllglob;
-	uint32_t	per_pll_fdbck;
-	uint32_t	per_pll_pllc0;
-	uint32_t	per_pll_pllc1;
-	uint32_t	per_pll_pllc2;
-	uint32_t	per_pll_pllc3;
-	uint32_t	per_pll_pllm;
-	uint32_t	alt_emacactr;
-	uint32_t	alt_emacbctr;
-	uint32_t	alt_emacptpctr;
-	uint32_t	alt_gpiodbctr;
-	uint32_t	alt_sdmmcctr;
-	uint32_t	alt_s2fuser0ctr;
-	uint32_t	alt_s2fuser1ctr;
-	uint32_t	alt_psirefctr;
-	uint32_t	hps_osc_clk_h;
-	uint32_t	fpga_clk_hz;
-	uint32_t	_pad_0x604_0x610[3];
-
-	/* misc configuration */
-	uint32_t	misc_magic;
-	uint32_t	misc_length;
-	uint32_t	_pad_0x618_0x620[2];
-	uint32_t	boot_source;
-} handoff;
-
-int verify_handoff_image(handoff *hoff_ptr, handoff *reverse_hoff_ptr);
-int agilex_get_handoff(handoff *hoff_ptr);
-
-#endif
-
-
diff --git a/plat/intel/soc/agilex/include/agilex_pinmux.h b/plat/intel/soc/agilex/include/agilex_pinmux.h
index e6a7b34..fe01062 100644
--- a/plat/intel/soc/agilex/include/agilex_pinmux.h
+++ b/plat/intel/soc/agilex/include/agilex_pinmux.h
@@ -12,7 +12,7 @@
 #define AGX_PINMUX_PINMUX_EMAC0_USEFPGA	0xffd13300
 #define AGX_PINMUX_IO0_DELAY		0xffd13400
 
-#include "agilex_handoff.h"
+#include "socfpga_handoff.h"
 
 void config_pinmux(handoff *handoff);
 
diff --git a/plat/intel/soc/agilex/include/platform_def.h b/plat/intel/soc/agilex/include/platform_def.h
deleted file mode 100644
index 277862a..0000000
--- a/plat/intel/soc/agilex/include/platform_def.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
- * Copyright (c) 2019, Intel Corporation. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef PLATFORM_DEF_H
-#define PLATFORM_DEF_H
-
-#include <arch.h>
-#include <common/interrupt_props.h>
-#include <common/tbbr/tbbr_img_def.h>
-#include <plat/common/common_def.h>
-
-
-#define PLAT_CPUID_RELEASE			0xffe1b000
-#define PLAT_SEC_ENTRY				0xffe1b008
-
-/* Define next boot image name and offset */
-#define PLAT_NS_IMAGE_OFFSET			0x50000
-#define PLAT_HANDOFF_OFFSET			0xFFE3F000
-
-/*******************************************************************************
- * Platform binary types for linking
- ******************************************************************************/
-#define PLATFORM_LINKER_FORMAT			"elf64-littleaarch64"
-#define PLATFORM_LINKER_ARCH			aarch64
-
-/* Agilex supports up to 124GB RAM */
-#define PLAT_PHY_ADDR_SPACE_SIZE		(1ULL << 39)
-#define PLAT_VIRT_ADDR_SPACE_SIZE		(1ULL << 39)
-
-
-/*******************************************************************************
- * Generic platform constants
- ******************************************************************************/
-#define PLAT_PRIMARY_CPU			0
-#define PLAT_SECONDARY_ENTRY_BASE		0x01f78bf0
-
-/* Size of cacheable stacks */
-#define PLATFORM_STACK_SIZE			0x2000
-
-/* PSCI related constant */
-#define PLAT_NUM_POWER_DOMAINS			5
-#define PLAT_MAX_PWR_LVL			1
-#define PLAT_MAX_RET_STATE			1
-#define PLAT_MAX_OFF_STATE			2
-#define PLATFORM_SYSTEM_COUNT			1
-#define PLATFORM_CLUSTER_COUNT			1
-#define PLATFORM_CLUSTER0_CORE_COUNT		4
-#define PLATFORM_CLUSTER1_CORE_COUNT		0
-#define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER1_CORE_COUNT + \
-					PLATFORM_CLUSTER0_CORE_COUNT)
-#define PLATFORM_MAX_CPUS_PER_CLUSTER		4
-
-/* Interrupt related constant */
-
-#define INTEL_AGX_IRQ_SEC_PHY_TIMER		29
-
-#define INTEL_AGX_IRQ_SEC_SGI_0			8
-#define INTEL_AGX_IRQ_SEC_SGI_1			9
-#define INTEL_AGX_IRQ_SEC_SGI_2			10
-#define INTEL_AGX_IRQ_SEC_SGI_3			11
-#define INTEL_AGX_IRQ_SEC_SGI_4			12
-#define INTEL_AGX_IRQ_SEC_SGI_5			13
-#define INTEL_AGX_IRQ_SEC_SGI_6			14
-#define INTEL_AGX_IRQ_SEC_SGI_7			15
-
-#define TSP_IRQ_SEC_PHY_TIMER		INTEL_AGX_IRQ_SEC_PHY_TIMER
-#define TSP_SEC_MEM_BASE		BL32_BASE
-#define TSP_SEC_MEM_SIZE		(BL32_LIMIT - BL32_BASE + 1)
-/*******************************************************************************
- * Platform memory map related constants
- ******************************************************************************/
-#define DRAM_BASE				(0x0)
-#define DRAM_SIZE				(0x80000000)
-
-#define OCRAM_BASE				(0xFFE00000)
-#define OCRAM_SIZE				(0x00040000)
-
-#define MEM64_BASE				(0x0100000000)
-#define MEM64_SIZE				(0x1F00000000)
-
-#define DEVICE1_BASE				(0x80000000)
-#define DEVICE1_SIZE				(0x60000000)
-
-#define DEVICE2_BASE				(0xF7000000)
-#define DEVICE2_SIZE				(0x08E00000)
-
-#define DEVICE3_BASE				(0xFFFC0000)
-#define DEVICE3_SIZE				(0x00008000)
-
-#define DEVICE4_BASE				(0x2000000000)
-#define DEVICE4_SIZE				(0x0100000000)
-
-/*******************************************************************************
- * BL31 specific defines.
- ******************************************************************************/
-/*
- * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if
- * present). BL31_BASE is calculated using the current BL3-1 debug size plus a
- * little space for growth.
- */
-
-
-#define FIRMWARE_WELCOME_STR		"Booting Trusted Firmware\n"
-
-#define BL1_RO_BASE	(0xffe00000)
-#define BL1_RO_LIMIT	(0xffe0f000)
-#define BL1_RW_BASE	(0xffe10000)
-#define BL1_RW_LIMIT	(0xffe1ffff)
-#define BL1_RW_SIZE	(0x14000)
-
-#define BL2_BASE	(0xffe00000)
-#define BL2_LIMIT	(0xffe1b000)
-
-#define BL31_BASE	(0xffe1c000)
-#define BL31_LIMIT	(0xffe3bfff)
-
-/*******************************************************************************
- * Platform specific page table and MMU setup constants
- ******************************************************************************/
-#define MAX_XLAT_TABLES			8
-#define MAX_MMAP_REGIONS		16
-
-/*******************************************************************************
- * Declarations and constants to access the mailboxes safely. Each mailbox is
- * aligned on the biggest cache line size in the platform. This is known only
- * to the platform as it might have a combination of integrated and external
- * caches. Such alignment ensures that two maiboxes do not sit on the same cache
- * line at any cache level. They could belong to different cpus/clusters &
- * get written while being protected by different locks causing corruption of
- * a valid mailbox address.
- ******************************************************************************/
-#define CACHE_WRITEBACK_SHIFT			6
-#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
-
-#define PLAT_GIC_BASE			(0xFFFC0000)
-#define PLAT_GICC_BASE			(PLAT_GIC_BASE + 0x2000)
-#define PLAT_GICD_BASE			(PLAT_GIC_BASE + 0x1000)
-#define PLAT_GICR_BASE			0
-
-/*******************************************************************************
- * UART related constants
- ******************************************************************************/
-#define PLAT_UART0_BASE		(0xFFC02000)
-#define PLAT_UART1_BASE		(0xFFC02100)
-
-#define CRASH_CONSOLE_BASE	PLAT_UART0_BASE
-
-#define PLAT_BAUDRATE		(115200)
-#define PLAT_UART_CLOCK		(100000000)
-
-/*******************************************************************************
- * System counter frequency related constants
- ******************************************************************************/
-#define PLAT_SYS_COUNTER_FREQ_IN_TICKS	(400000000)
-#define PLAT_SYS_COUNTER_FREQ_IN_MHZ	(400)
-
-#define PLAT_INTEL_AGX_GICD_BASE	PLAT_GICD_BASE
-#define PLAT_INTEL_AGX_GICC_BASE	PLAT_GICC_BASE
-
-/*
- * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
- * terminology. On a GICv2 system or mode, the lists will be merged and treated
- * as Group 0 interrupts.
- */
-#define PLAT_INTEL_AGX_G1S_IRQ_PROPS(grp) \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
-			grp, GIC_INTR_CFG_LEVEL), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE), \
-	INTR_PROP_DESC(INTEL_AGX_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
-			GIC_INTR_CFG_EDGE)
-
-#define PLAT_INTEL_AGX_G0_IRQ_PROPS(grp)
-
-#define MAX_IO_HANDLES			4
-#define MAX_IO_DEVICES			4
-#define MAX_IO_BLOCK_DEVICES		2
-
-#endif /* PLATFORM_DEF_H */
-
diff --git a/plat/intel/soc/agilex/include/socfpga_plat_def.h b/plat/intel/soc/agilex/include/socfpga_plat_def.h
new file mode 100644
index 0000000..a346cb5
--- /dev/null
+++ b/plat/intel/soc/agilex/include/socfpga_plat_def.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019, Intel Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_SOCFPGA_DEF_H
+#define PLAT_SOCFPGA_DEF_H
+
+#include <platform_def.h>
+
+/* Platform Setting */
+#define PLATFORM_MODEL				PLAT_SOCFPGA_AGILEX
+
+/* Register Mapping */
+#define SOCFPGA_MMC_REG_BASE			0xff808000
+
+#define SOCFPGA_RSTMGR_OFST			0xffd11000
+#define SOCFPGA_RSTMGR_MPUMODRST_OFST		0xffd11020
+
+#endif /* PLAT_SOCFPGA_DEF_H */
+
diff --git a/plat/intel/soc/agilex/platform.mk b/plat/intel/soc/agilex/platform.mk
index d1ea629..f21e842 100644
--- a/plat/intel/soc/agilex/platform.mk
+++ b/plat/intel/soc/agilex/platform.mk
@@ -40,10 +40,10 @@
 		plat/intel/soc/agilex/socfpga_storage.c			\
                 plat/intel/soc/common/bl2_plat_mem_params_desc.c	\
 		plat/intel/soc/agilex/soc/agilex_reset_manager.c	\
-		plat/intel/soc/agilex/soc/agilex_handoff.c		\
 		plat/intel/soc/agilex/soc/agilex_clock_manager.c	\
 		plat/intel/soc/agilex/soc/agilex_pinmux.c		\
 		plat/intel/soc/agilex/soc/agilex_memory_controller.c	\
+		plat/intel/soc/common/soc/socfpga_handoff.c		\
 		plat/intel/soc/common/socfpga_delay_timer.c		\
 		plat/intel/soc/common/socfpga_image_load.c		\
 		plat/intel/soc/agilex/soc/agilex_system_manager.c	\
@@ -65,7 +65,6 @@
 		plat/intel/soc/agilex/soc/agilex_reset_manager.c	\
 		plat/intel/soc/agilex/soc/agilex_pinmux.c		\
 		plat/intel/soc/agilex/soc/agilex_clock_manager.c	\
-		plat/intel/soc/agilex/soc/agilex_handoff.c		\
 		plat/intel/soc/agilex/soc/agilex_mailbox.c
 
 PROGRAMMABLE_RESET_ADDRESS	:= 0
diff --git a/plat/intel/soc/agilex/soc/agilex_clock_manager.c b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
index 06891ff..96b669c 100644
--- a/plat/intel/soc/agilex/soc/agilex_clock_manager.c
+++ b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
@@ -11,8 +11,8 @@
 #include <lib/mmio.h>
 
 #include "agilex_clock_manager.h"
-#include "agilex_handoff.h"
 #include "agilex_system_manager.h"
+#include "socfpga_handoff.h"
 
 
 uint32_t wait_pll_lock(void)
diff --git a/plat/intel/soc/agilex/soc/agilex_handoff.c b/plat/intel/soc/agilex/soc/agilex_handoff.c
deleted file mode 100644
index a458686..0000000
--- a/plat/intel/soc/agilex/soc/agilex_handoff.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2019, Intel Corporation. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <platform_def.h>
-#include <string.h>
-
-#include "agilex_handoff.h"
-
-#define SWAP_UINT32(x) (((x) >> 24) | (((x) & 0x00FF0000) >> 8) |	\
-				(((x) & 0x0000FF00) << 8) | ((x) << 24))
-
-int agilex_get_handoff(handoff *reverse_hoff_ptr)
-{
-	int i;
-	uint32_t *buffer;
-	handoff *handoff_ptr = (handoff *) PLAT_HANDOFF_OFFSET;
-
-	memcpy(reverse_hoff_ptr, handoff_ptr, sizeof(handoff));
-	buffer = (uint32_t *)reverse_hoff_ptr;
-
-	/* convert big endian to little endian */
-	for (i = 0; i < sizeof(handoff) / 4; i++)
-		buffer[i] = SWAP_UINT32(buffer[i]);
-
-	if (reverse_hoff_ptr->header_magic != HANDOFF_MAGIC_HEADER)
-		return -1;
-	if (reverse_hoff_ptr->pinmux_sel_magic != HANDOFF_MAGIC_PINMUX_SEL)
-		return -1;
-	if (reverse_hoff_ptr->pinmux_io_magic != HANDOFF_MAGIC_IOCTLR)
-		return -1;
-	if (reverse_hoff_ptr->pinmux_fpga_magic != HANDOFF_MAGIC_FPGA)
-		return -1;
-	if (reverse_hoff_ptr->pinmux_delay_magic != HANDOFF_MAGIC_IODELAY)
-		return -1;
-
-	return 0;
-}