rockchip: px30: move secure init to separate file
Similar to others like rk3399 and rk3288 move the secure init to a
separate file to unclutter the soc init a bit.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: Iebb38e24f1c7fe5353f139c896fb8ca769bf9691
diff --git a/plat/rockchip/px30/drivers/secure/secure.h b/plat/rockchip/px30/drivers/secure/secure.h
new file mode 100644
index 0000000..498027d
--- /dev/null
+++ b/plat/rockchip/px30/drivers/secure/secure.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SECURE_H
+#define SECURE_H
+
+/***************************************************************************
+ * SGRF
+ ***************************************************************************/
+#define SGRF_SOC_CON(i) ((i) * 0x4)
+#define SGRF_DMAC_CON(i) (0x30 + (i) * 0x4)
+
+#define SGRF_MST_S_ALL_NS 0xffffffff
+#define SGRF_SLV_S_ALL_NS 0xffff0000
+#define DMA_IRQ_BOOT_NS 0xffffffff
+#define DMA_PERI_CH_NS_15_0 0xffffffff
+#define DMA_PERI_CH_NS_19_16 0x000f000f
+#define DMA_MANAGER_BOOT_NS 0x00010001
+#define DMA_SOFTRST_REQ BITS_WITH_WMASK(1, 0x1, 12)
+#define DMA_SOFTRST_RLS BITS_WITH_WMASK(0, 0x1, 12)
+
+/***************************************************************************
+ * DDR FIREWALL
+ ***************************************************************************/
+#define FIREWALL_DDR_FW_DDR_RGN(i) ((i) * 0x4)
+#define FIREWALL_DDR_FW_DDR_MST(i) (0x20 + (i) * 0x4)
+#define FIREWALL_DDR_FW_DDR_CON_REG 0x40
+#define FIREWALL_DDR_FW_DDR_RGN_NUM 8
+#define FIREWALL_DDR_FW_DDR_MST_NUM 6
+
+#define PLAT_MAX_DDR_CAPACITY_MB 4096
+#define RG_MAP_SECURE(top, base) ((((top) - 1) << 16) | (base))
+
+/**************************************************
+ * secure timer
+ **************************************************/
+
+/* chanal0~5 */
+#define STIMER_CHN_BASE(n) (STIME_BASE + 0x20 * (n))
+
+#define TIMER_LOAD_COUNT0 0x0
+#define TIMER_LOAD_COUNT1 0x4
+
+#define TIMER_CUR_VALUE0 0x8
+#define TIMER_CUR_VALUE1 0xc
+
+#define TIMER_CONTROL_REG 0x10
+#define TIMER_INTSTATUS 0x18
+
+#define TIMER_DIS 0x0
+#define TIMER_EN 0x1
+
+#define TIMER_FMODE (0x0 << 1)
+#define TIMER_RMODE (0x1 << 1)
+
+#define TIMER_LOAD_COUNT0_MSK (0xffffffff)
+#define TIMER_LOAD_COUNT1_MSK (0xffffffff00000000)
+
+void secure_timer_init(void);
+void sgrf_init(void);
+
+#endif /* SECURE_H */