Add common ARM and CSS platform code
This major change pulls out the common functionality from the
FVP and Juno platform ports into the following categories:
* (include/)plat/common. Common platform porting functionality that
typically may be used by all platforms.
* (include/)plat/arm/common. Common platform porting functionality
that may be used by all ARM standard platforms. This includes all
ARM development platforms like FVP and Juno but may also include
non-ARM-owned platforms.
* (include/)plat/arm/board/common. Common platform porting
functionality for ARM development platforms at the board
(off SoC) level.
* (include/)plat/arm/css/common. Common platform porting
functionality at the ARM Compute SubSystem (CSS) level. Juno
is an example of a CSS-based platform.
* (include/)plat/arm/soc/common. Common platform porting
functionality at the ARM SoC level, which is not already defined
at the ARM CSS level.
No guarantees are made about the backward compatibility of
functionality provided in (include/)plat/arm.
Also remove any unnecessary variation between the ARM development
platform ports, including:
* Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the
Juno implementation, which copies the information from BL2 memory
instead of expecting it to persist in shared memory.
* Unify the TZC configuration. There is no need to add a region
for SCP in Juno; it's enough to simply not allow any access to
this reserved region. Also set region 0 to provide no access by
default instead of assuming this is the case.
* Unify the number of memory map regions required for ARM
development platforms, although the actual ranges mapped for each
platform may be different. For the FVP port, this reduces the
mapped peripheral address space.
These latter changes will only be observed when the platform ports
are migrated to use the new common platform code in subsequent
patches.
Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
diff --git a/include/plat/arm/common/aarch64/arm_macros.S b/include/plat/arm/common/aarch64/arm_macros.S
new file mode 100644
index 0000000..594b096
--- /dev/null
+++ b/include/plat/arm/common/aarch64/arm_macros.S
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __ARM_MACROS_S__
+#define __ARM_MACROS_S__
+
+#include <cci.h>
+#include <gic_v2.h>
+#include <platform_def.h>
+
+.section .rodata.gic_reg_name, "aS"
+gicc_regs:
+ .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+gicd_pend_reg:
+ .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \
+ " Offset:\t\t\tvalue\n"
+newline:
+ .asciz "\n"
+spacer:
+ .asciz ":\t\t0x"
+
+ /* ---------------------------------------------
+ * The below utility macro prints out relevant GIC
+ * registers whenever an unhandled exception is
+ * taken in BL3-1 on ARM standard platforms.
+ * Expects: GICD base in x16, GICC base in x17
+ * Clobbers: x0 - x10, sp
+ * ---------------------------------------------
+ */
+ .macro arm_print_gic_regs
+ /* Load the gicc reg list to x6 */
+ adr x6, gicc_regs
+ /* Load the gicc regs to gp regs used by str_in_crash_buf_print */
+ ldr w8, [x17, #GICC_HPPIR]
+ ldr w9, [x17, #GICC_AHPPIR]
+ ldr w10, [x17, #GICC_CTLR]
+ /* Store to the crash buf and print to console */
+ bl str_in_crash_buf_print
+
+ /* Print the GICD_ISPENDR regs */
+ add x7, x16, #GICD_ISPENDR
+ adr x4, gicd_pend_reg
+ bl asm_print_str
+gicd_ispendr_loop:
+ sub x4, x7, x16
+ cmp x4, #0x280
+ b.eq exit_print_gic_regs
+ bl asm_print_hex
+
+ adr x4, spacer
+ bl asm_print_str
+
+ ldr x4, [x7], #8
+ bl asm_print_hex
+
+ adr x4, newline
+ bl asm_print_str
+ b gicd_ispendr_loop
+exit_print_gic_regs:
+ .endm
+
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+ .asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+ /* ------------------------------------------------
+ * The below required platform porting macro prints
+ * out relevant interconnect registers whenever an
+ * unhandled exception is taken in BL3-1.
+ * Clobbers: x0 - x9, sp
+ * ------------------------------------------------
+ */
+ .macro plat_print_interconnect_regs
+ adr x6, cci_iface_regs
+ /* Store in x7 the base address of the first interface */
+ mov_imm x7, (PLAT_ARM_CCI_BASE + SLAVE_IFACE_OFFSET( \
+ PLAT_ARM_CCI_CLUSTER0_SL_IFACE_IX))
+ ldr w8, [x7, #SNOOP_CTRL_REG]
+ /* Store in x7 the base address of the second interface */
+ mov_imm x7, (PLAT_ARM_CCI_BASE + SLAVE_IFACE_OFFSET( \
+ PLAT_ARM_CCI_CLUSTER1_SL_IFACE_IX))
+ ldr w9, [x7, #SNOOP_CTRL_REG]
+ /* Store to the crash buf and print to console */
+ bl str_in_crash_buf_print
+ .endm
+
+
+#endif /* __ARM_MACROS_S__ */