nxp: platform files for bl2 and bl31 setup
For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017
diff --git a/plat/nxp/common/setup/common.mk b/plat/nxp/common/setup/common.mk
new file mode 100644
index 0000000..1fcf1d0
--- /dev/null
+++ b/plat/nxp/common/setup/common.mk
@@ -0,0 +1,105 @@
+#
+# Copyright 2018-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+###############################################################################
+# Flow begins in BL2 at EL3 mode
+BL2_AT_EL3 := 1
+
+# Though one core is powered up by default, there are
+# platform specific ways to release more than one core
+COLD_BOOT_SINGLE_CPU := 0
+
+PROGRAMMABLE_RESET_ADDRESS := 1
+
+USE_COHERENT_MEM := 0
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS := 1
+
+PLAT_XLAT_TABLES_DYNAMIC := 0
+
+ENABLE_SVE_FOR_NS := 0
+
+ENABLE_STACK_PROTECTOR := 0
+
+ERROR_DEPRECATED := 0
+
+LS_DISABLE_TRUSTED_WDOG := 1
+
+# On ARM platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA := 1
+
+# Enable new version of image loading on ARM platforms
+LOAD_IMAGE_V2 := 1
+
+RCW := ""
+
+ifneq (${SPD},none)
+$(eval $(call add_define, NXP_LOAD_BL32))
+endif
+
+###############################################################################
+
+PLAT_TOOL_PATH := tools/nxp
+CREATE_PBL_TOOL_PATH := ${PLAT_TOOL_PATH}/create_pbl
+PLAT_SETUP_PATH := ${PLAT_PATH}/common/setup
+
+PLAT_INCLUDES += -I${PLAT_SETUP_PATH}/include \
+ -Iinclude/plat/arm/common \
+ -Iinclude/drivers/arm \
+ -Iinclude/lib \
+ -Iinclude/drivers/io \
+ -Ilib/psci
+
+# Required without TBBR.
+# To include the defines for DDR PHY Images.
+PLAT_INCLUDES += -Iinclude/common/tbbr
+
+include ${PLAT_SETUP_PATH}/core.mk
+PLAT_BL_COMMON_SOURCES += ${CPU_LIBS} \
+ plat/nxp/common/setup/ls_err.c \
+ plat/nxp/common/setup/ls_common.c
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES += ${PLAT_SETUP_PATH}/ls_stack_protector.c
+endif
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
+
+BL2_SOURCES += drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ common/desc_image_load.c \
+ plat/nxp/common/setup/ls_image_load.c \
+ plat/nxp/common/setup/ls_io_storage.c \
+ plat/nxp/common/setup/ls_bl2_el3_setup.c \
+ plat/nxp/common/setup/${ARCH}/ls_bl2_mem_params_desc.c
+
+BL31_SOURCES += plat/nxp/common/setup/ls_bl31_setup.c \
+
+ifeq (${LS_EL3_INTERRUPT_HANDLER}, yes)
+$(eval $(call add_define, LS_EL3_INTERRUPT_HANDLER))
+BL31_SOURCES += plat/nxp/common/setup/ls_interrupt_mgmt.c
+endif
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES += ${TEST_SOURCES}
+endif
+
+# Verify build config
+# -------------------
+
+ifneq (${LOAD_IMAGE_V2}, 1)
+ $(error Error: Layerscape needs LOAD_IMAGE_V2=1)
+else
+$(eval $(call add_define,LOAD_IMAGE_V2))
+endif
+
+include $(CREATE_PBL_TOOL_PATH)/create_pbl.mk