plat: renesas:rcar: Fix checkpatch warnings
Fix checkpatch warnings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: If9318a5113fbd6ae8b5c4bfb409da9e393673258
diff --git a/plat/renesas/rcar/bl2_secure_setting.c b/plat/renesas/rcar/bl2_secure_setting.c
index 7473df5..095d1f6 100644
--- a/plat/renesas/rcar/bl2_secure_setting.c
+++ b/plat/renesas/rcar/bl2_secure_setting.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -18,230 +18,244 @@
uint32_t reg;
uint32_t val;
} lifec[] = {
- /** LIFEC0 (SECURITY) settings */
- /* Security attribute setting for master ports */
- /* Bit 0: ARM realtime core (Cortex-R7) master port */
- /* 0: Non-Secure */
- {
- SEC_SRC, 0x0000001EU},
- /** Security attribute setting for slave ports 0 to 15 */
- /* {SEC_SEL0, 0xFFFFFFFFU}, */
- /* {SEC_SEL1, 0xFFFFFFFFU}, */
- /* {SEC_SEL2, 0xFFFFFFFFU}, */
- /* Bit19: AXI-Bus (Main Memory domain AXI) slave ports */
- /* 0: registers accessed from secure resource only */
- /* Bit 9: DBSC4 register access slave ports. */
- /* 0: registers accessed from secure resource only. */
+ /*
+ * LIFEC0 (SECURITY) settings
+ * Security attribute setting for master ports
+ * Bit 0: ARM realtime core (Cortex-R7) master port
+ * 0: Non-Secure
+ */
+ { SEC_SRC, 0x0000001EU },
+ /*
+ * Security attribute setting for slave ports 0 to 15
+ * {SEC_SEL0, 0xFFFFFFFFU},
+ * {SEC_SEL1, 0xFFFFFFFFU},
+ * {SEC_SEL2, 0xFFFFFFFFU},
+ * Bit19: AXI-Bus (Main Memory domain AXI) slave ports
+ * 0: registers accessed from secure resource only
+ * Bit 9: DBSC4 register access slave ports.
+ * 0: registers accessed from secure resource only.
+ */
#if (LIFEC_DBSC_PROTECT_ENABLE == 1)
- {
- SEC_SEL3, 0xFFF7FDFFU},
-#else
- {
- SEC_SEL3, 0xFFFFFFFFU},
-#endif
- /* {SEC_SEL4, 0xFFFFFFFFU}, */
- /* Bit 6: Boot ROM slave ports. */
- /* 0: registers accessed from secure resource only */
- {
- SEC_SEL5, 0xFFFFFFBFU},
- /* Bit13: SCEG PKA (secure APB) slave ports */
- /* 0: registers accessed from secure resource only */
- /* 1: Reserved[R-Car E3] */
- /* Bit12: SCEG PKA (public APB) slave ports */
- /* 0: registers accessed from secure resource only */
- /* 1: Reserved[R-Car E3] */
- /* Bit10: SCEG Secure Core slave ports */
- /* 0: registers accessed from secure resource only */
+ { SEC_SEL3, 0xFFF7FDFFU },
+#else /* LIFEC_DBSC_PROTECT_ENABLE == 1 */
+ { SEC_SEL3, 0xFFFFFFFFU },
+#endif /* LIFEC_DBSC_PROTECT_ENABLE == 1 */
+ /*
+ * {SEC_SEL4, 0xFFFFFFFFU},
+ * Bit 6: Boot ROM slave ports.
+ * 0: registers accessed from secure resource only
+ */
+ { SEC_SEL5, 0xFFFFFFBFU },
+ /*
+ * Bit13: SCEG PKA (secure APB) slave ports
+ * 0: registers accessed from secure resource only
+ * 1: Reserved[R-Car E3]
+ * Bit12: SCEG PKA (public APB) slave ports
+ * 0: registers accessed from secure resource only
+ * 1: Reserved[R-Car E3]
+ * Bit10: SCEG Secure Core slave ports
+ * 0: registers accessed from secure resource only
+ */
#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
- {
- SEC_SEL6, 0xFFFFFBFFU},
-#else
- {
- SEC_SEL6, 0xFFFFCBFFU},
-#endif
- /* {SEC_SEL7, 0xFFFFFFFFU}, */
- /* {SEC_SEL8, 0xFFFFFFFFU}, */
- /* {SEC_SEL9, 0xFFFFFFFFU}, */
- /* {SEC_SEL10, 0xFFFFFFFFU}, */
- /* {SEC_SEL11, 0xFFFFFFFFU}, */
- /* {SEC_SEL12, 0xFFFFFFFFU}, */
- /* Bit22: RPC slave ports. */
- /* 0: registers accessed from secure resource only. */
+ { SEC_SEL6, 0xFFFFFBFFU },
+#else /* (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3) */
+ { SEC_SEL6, 0xFFFFCBFFU },
+#endif /* (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3) */
+ /*
+ * {SEC_SEL7, 0xFFFFFFFFU},
+ * {SEC_SEL8, 0xFFFFFFFFU},
+ * {SEC_SEL9, 0xFFFFFFFFU},
+ * {SEC_SEL10, 0xFFFFFFFFU},
+ * {SEC_SEL11, 0xFFFFFFFFU},
+ * {SEC_SEL12, 0xFFFFFFFFU},
+ * Bit22: RPC slave ports.
+ * 0: registers accessed from secure resource only.
+ */
#if (RCAR_RPC_HYPERFLASH_LOCKED == 1)
- {SEC_SEL13, 0xFFBFFFFFU},
-#endif
- /* Bit27: System Timer (SCMT) slave ports */
- /* 0: registers accessed from secure resource only */
- /* Bit26: System Watchdog Timer (SWDT) slave ports */
- /* 0: registers accessed from secure resource only */
- {
- SEC_SEL14, 0xF3FFFFFFU},
- /* Bit13: RST slave ports. */
- /* 0: registers accessed from secure resource only */
- /* Bit 7: Life Cycle 0 slave ports */
- /* 0: registers accessed from secure resource only */
- {
- SEC_SEL15, 0xFFFFFF3FU},
- /** Security group 0 attribute setting for master ports 0 */
- /** Security group 1 attribute setting for master ports 0 */
- /* {SEC_GRP0CR0, 0x00000000U}, */
- /* {SEC_GRP1CR0, 0x00000000U}, */
- /** Security group 0 attribute setting for master ports 1 */
- /** Security group 1 attribute setting for master ports 1 */
- /* {SEC_GRP0CR1, 0x00000000U}, */
- /* {SEC_GRP1CR1, 0x00000000U}, */
- /** Security group 0 attribute setting for master ports 2 */
- /** Security group 1 attribute setting for master ports 2 */
- /* Bit17: SCEG Secure Core master ports. */
- /* SecurityGroup3 */
- {
- SEC_GRP0CR2, 0x00020000U}, {
- SEC_GRP1CR2, 0x00020000U},
- /** Security group 0 attribute setting for master ports 3 */
- /** Security group 1 attribute setting for master ports 3 */
- /* {SEC_GRP0CR3, 0x00000000U}, */
- /* {SEC_GRP1CR3, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 0 */
- /** Security group 1 attribute setting for slave ports 0 */
- /* {SEC_GRP0COND0, 0x00000000U}, */
- /* {SEC_GRP1COND0, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 1 */
- /** Security group 1 attribute setting for slave ports 1 */
- /* {SEC_GRP0COND1, 0x00000000U}, */
- /* {SEC_GRP1COND1, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 2 */
- /** Security group 1 attribute setting for slave ports 2 */
- /* {SEC_GRP0COND2, 0x00000000U}, */
- /* {SEC_GRP1COND2, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 3 */
- /** Security group 1 attribute setting for slave ports 3 */
- /* Bit19: AXI-Bus (Main Memory domain AXI) slave ports. */
- /* SecurityGroup3 */
- /* Bit 9: DBSC4 register access slave ports. */
- /* SecurityGroup3 */
+ { SEC_SEL13, 0xFFBFFFFFU },
+#endif /* (RCAR_RPC_HYPERFLASH_LOCKED == 1) */
+ /*
+ * Bit27: System Timer (SCMT) slave ports
+ * 0: registers accessed from secure resource only
+ * Bit26: System Watchdog Timer (SWDT) slave ports
+ * 0: registers accessed from secure resource only
+ */
+ { SEC_SEL14, 0xF3FFFFFFU },
+ /*
+ * Bit13: RST slave ports.
+ * 0: registers accessed from secure resource only
+ * Bit 7: Life Cycle 0 slave ports
+ * 0: registers accessed from secure resource only
+ */
+ { SEC_SEL15, 0xFFFFFF3FU },
+ /*
+ * Security group 0 attribute setting for master ports 0
+ * Security group 1 attribute setting for master ports 0
+ * {SEC_GRP0CR0, 0x00000000U},
+ * {SEC_GRP1CR0, 0x00000000U},
+ * Security group 0 attribute setting for master ports 1
+ * Security group 1 attribute setting for master ports 1
+ * {SEC_GRP0CR1, 0x00000000U},
+ * {SEC_GRP1CR1, 0x00000000U},
+ * Security group 0 attribute setting for master ports 2
+ * Security group 1 attribute setting for master ports 2
+ * Bit17: SCEG Secure Core master ports.
+ * SecurityGroup3
+ */
+ { SEC_GRP0CR2, 0x00020000U },
+ { SEC_GRP1CR2, 0x00020000U },
+ /*
+ * Security group 0 attribute setting for master ports 3
+ * Security group 1 attribute setting for master ports 3
+ * {SEC_GRP0CR3, 0x00000000U},
+ * {SEC_GRP1CR3, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 0
+ * Security group 1 attribute setting for slave ports 0
+ * {SEC_GRP0COND0, 0x00000000U},
+ * {SEC_GRP1COND0, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 1
+ * Security group 1 attribute setting for slave ports 1
+ * {SEC_GRP0COND1, 0x00000000U},
+ * {SEC_GRP1COND1, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 2
+ * Security group 1 attribute setting for slave ports 2
+ * {SEC_GRP0COND2, 0x00000000U},
+ * {SEC_GRP1COND2, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 3
+ * Security group 1 attribute setting for slave ports 3
+ * Bit19: AXI-Bus (Main Memory domain AXI) slave ports.
+ * SecurityGroup3
+ * Bit 9: DBSC4 register access slave ports.
+ * SecurityGroup3
+ */
#if (LIFEC_DBSC_PROTECT_ENABLE == 1)
- {
- SEC_GRP0COND3, 0x00080200U}, {
- SEC_GRP1COND3, 0x00080200U},
-#else
- {
- SEC_GRP0COND3, 0x00000000U}, {
- SEC_GRP1COND3, 0x00000000U},
-#endif
- /** Security group 0 attribute setting for slave ports 4 */
- /** Security group 1 attribute setting for slave ports 4 */
- /* {SEC_GRP0COND4, 0x00000000U}, */
- /* {SEC_GRP1COND4, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 5 */
- /** Security group 1 attribute setting for slave ports 5 */
- /* Bit 6: Boot ROM slave ports */
- /* SecurityGroup3 */
- {
- SEC_GRP0COND5, 0x00000040U}, {
- SEC_GRP1COND5, 0x00000040U},
- /** Security group 0 attribute setting for slave ports 6 */
- /** Security group 1 attribute setting for slave ports 6 */
- /* Bit13: SCEG PKA (secure APB) slave ports */
- /* SecurityGroup3 */
- /* Reserved[R-Car E3] */
- /* Bit12: SCEG PKA (public APB) slave ports */
- /* SecurityGroup3 */
- /* Reserved[R-Car E3] */
- /* Bit10: SCEG Secure Core slave ports */
- /* SecurityGroup3 */
+ { SEC_GRP0COND3, 0x00080200U },
+ { SEC_GRP1COND3, 0x00080200U },
+#else /* (LIFEC_DBSC_PROTECT_ENABLE == 1) */
+ { SEC_GRP0COND3, 0x00000000U },
+ { SEC_GRP1COND3, 0x00000000U },
+#endif /* (LIFEC_DBSC_PROTECT_ENABLE == 1) */
+ /*
+ * Security group 0 attribute setting for slave ports 4
+ * Security group 1 attribute setting for slave ports 4
+ * {SEC_GRP0COND4, 0x00000000U},
+ * {SEC_GRP1COND4, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 5
+ * Security group 1 attribute setting for slave ports 5
+ * Bit 6: Boot ROM slave ports
+ * SecurityGroup3
+ */
+ { SEC_GRP0COND5, 0x00000040U },
+ { SEC_GRP1COND5, 0x00000040U },
+ /*
+ * Security group 0 attribute setting for slave ports 6
+ * Security group 1 attribute setting for slave ports 6
+ * Bit13: SCEG PKA (secure APB) slave ports
+ * SecurityGroup3
+ * Reserved[R-Car E3]
+ * Bit12: SCEG PKA (public APB) slave ports
+ * SecurityGroup3
+ * Reserved[R-Car E3]
+ * Bit10: SCEG Secure Core slave ports
+ * SecurityGroup3
+ */
#if RCAR_LSI == RCAR_E3
- {
- SEC_GRP0COND6, 0x00000400U}, {
- SEC_GRP1COND6, 0x00000400U},
-#else
- {
- SEC_GRP0COND6, 0x00003400U}, {
- SEC_GRP1COND6, 0x00003400U},
-#endif
- /** Security group 0 attribute setting for slave ports 7 */
- /** Security group 1 attribute setting for slave ports 7 */
- /* {SEC_GRP0COND7, 0x00000000U}, */
- /* {SEC_GRP1COND7, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 8 */
- /** Security group 1 attribute setting for slave ports 8 */
- /* {SEC_GRP0COND8, 0x00000000U}, */
- /* {SEC_GRP1COND8, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 9 */
- /** Security group 1 attribute setting for slave ports 9 */
- /* {SEC_GRP0COND9, 0x00000000U}, */
- /* {SEC_GRP1COND9, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 10 */
- /** Security group 1 attribute setting for slave ports 10 */
- /* {SEC_GRP0COND10, 0x00000000U}, */
- /* {SEC_GRP1COND10, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 11 */
- /** Security group 1 attribute setting for slave ports 11 */
- /* {SEC_GRP0COND11, 0x00000000U}, */
- /* {SEC_GRP1COND11, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 12 */
- /** Security group 1 attribute setting for slave ports 12 */
- /* {SEC_GRP0COND12, 0x00000000U}, */
- /* {SEC_GRP1COND12, 0x00000000U}, */
- /** Security group 0 attribute setting for slave ports 13 */
- /** Security group 1 attribute setting for slave ports 13 */
- /* Bit22: RPC slave ports. */
- /* SecurityGroup3 */
+ { SEC_GRP0COND6, 0x00000400U },
+ { SEC_GRP1COND6, 0x00000400U },
+#else /* RCAR_LSI == RCAR_E3 */
+ { SEC_GRP0COND6, 0x00003400U },
+ { SEC_GRP1COND6, 0x00003400U },
+#endif /* RCAR_LSI == RCAR_E3 */
+ /*
+ * Security group 0 attribute setting for slave ports 7
+ * Security group 1 attribute setting for slave ports 7
+ * {SEC_GRP0COND7, 0x00000000U},
+ * {SEC_GRP1COND7, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 8
+ * Security group 1 attribute setting for slave ports 8
+ * {SEC_GRP0COND8, 0x00000000U},
+ * {SEC_GRP1COND8, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 9
+ * Security group 1 attribute setting for slave ports 9
+ * {SEC_GRP0COND9, 0x00000000U},
+ * {SEC_GRP1COND9, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 10
+ * Security group 1 attribute setting for slave ports 10
+ * {SEC_GRP0COND10, 0x00000000U},
+ * {SEC_GRP1COND10, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 11
+ * Security group 1 attribute setting for slave ports 11
+ * {SEC_GRP0COND11, 0x00000000U},
+ * {SEC_GRP1COND11, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 12
+ * Security group 1 attribute setting for slave ports 12
+ * {SEC_GRP0COND12, 0x00000000U},
+ * {SEC_GRP1COND12, 0x00000000U},
+ * Security group 0 attribute setting for slave ports 13
+ * Security group 1 attribute setting for slave ports 13
+ * Bit22: RPC slave ports.
+ * SecurityGroup3
+ */
#if (RCAR_RPC_HYPERFLASH_LOCKED == 1)
- {SEC_GRP0COND13, 0x00400000U},
- {SEC_GRP1COND13, 0x00400000U},
-#endif
- /** Security group 0 attribute setting for slave ports 14 */
- /** Security group 1 attribute setting for slave ports 14 */
- /* Bit26: System Timer (SCMT) slave ports */
- /* SecurityGroup3 */
- /* Bit27: System Watchdog Timer (SWDT) slave ports */
- /* SecurityGroup3 */
- {
- SEC_GRP0COND14, 0x0C000000U}, {
- SEC_GRP1COND14, 0x0C000000U},
- /** Security group 0 attribute setting for slave ports 15 */
- /** Security group 1 attribute setting for slave ports 15 */
- /* Bit13: RST slave ports */
- /* SecurityGroup3 */
- /* Bit 7: Life Cycle 0 slave ports */
- /* SecurityGroup3 */
- /* Bit 6: TDBG slave ports */
- /* SecurityGroup3 */
- {
- SEC_GRP0COND15, 0x000000C0U}, {
- SEC_GRP1COND15, 0x000000C0U},
- /** Security write protection attribute setting slave ports 0 */
- /* {SEC_READONLY0, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 1 */
- /* {SEC_READONLY1, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 2 */
- /* {SEC_READONLY2, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 3 */
- /* {SEC_READONLY3, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 4 */
- /* {SEC_READONLY4, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 5 */
- /* {SEC_READONLY5, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 6 */
- /* {SEC_READONLY6, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 7 */
- /* {SEC_READONLY7, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 8 */
- /* {SEC_READONLY8, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 9 */
- /* {SEC_READONLY9, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 10 */
- /* {SEC_READONLY10, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 11 */
- /* {SEC_READONLY11, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 12 */
- /* {SEC_READONLY12, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 13 */
- /* {SEC_READONLY13, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 14 */
- /* {SEC_READONLY14, 0x00000000U}, */
- /** Security write protection attribute setting slave ports 15 */
- /* {SEC_READONLY15, 0x00000000U} */
+ { SEC_GRP0COND13, 0x00400000U },
+ { SEC_GRP1COND13, 0x00400000U },
+#endif /* (RCAR_RPC_HYPERFLASH_LOCKED == 1) */
+ /*
+ * Security group 0 attribute setting for slave ports 14
+ * Security group 1 attribute setting for slave ports 14
+ * Bit26: System Timer (SCMT) slave ports
+ * SecurityGroup3
+ * Bit27: System Watchdog Timer (SWDT) slave ports
+ * SecurityGroup3
+ */
+ { SEC_GRP0COND14, 0x0C000000U },
+ { SEC_GRP1COND14, 0x0C000000U },
+ /*
+ * Security group 0 attribute setting for slave ports 15
+ * Security group 1 attribute setting for slave ports 15
+ * Bit13: RST slave ports
+ * SecurityGroup3
+ * Bit 7: Life Cycle 0 slave ports
+ * SecurityGroup3
+ * Bit 6: TDBG slave ports
+ * SecurityGroup3
+ */
+ { SEC_GRP0COND15, 0x000000C0U },
+ { SEC_GRP1COND15, 0x000000C0U },
+ /*
+ * Security write protection attribute setting slave ports 0
+ * {SEC_READONLY0, 0x00000000U},
+ * Security write protection attribute setting slave ports 1
+ * {SEC_READONLY1, 0x00000000U},
+ * Security write protection attribute setting slave ports 2
+ * {SEC_READONLY2, 0x00000000U},
+ * Security write protection attribute setting slave ports 3
+ * {SEC_READONLY3, 0x00000000U},
+ * Security write protection attribute setting slave ports 4
+ * {SEC_READONLY4, 0x00000000U},
+ * Security write protection attribute setting slave ports 5
+ * {SEC_READONLY5, 0x00000000U},
+ * Security write protection attribute setting slave ports 6
+ * {SEC_READONLY6, 0x00000000U},
+ * Security write protection attribute setting slave ports 7
+ * {SEC_READONLY7, 0x00000000U},
+ * Security write protection attribute setting slave ports 8
+ * {SEC_READONLY8, 0x00000000U},
+ * Security write protection attribute setting slave ports 9
+ * {SEC_READONLY9, 0x00000000U},
+ * Security write protection attribute setting slave ports 10
+ * {SEC_READONLY10, 0x00000000U},
+ * Security write protection attribute setting slave ports 11
+ * {SEC_READONLY11, 0x00000000U},
+ * Security write protection attribute setting slave ports 12
+ * {SEC_READONLY12, 0x00000000U},
+ * Security write protection attribute setting slave ports 13
+ * {SEC_READONLY13, 0x00000000U},
+ * Security write protection attribute setting slave ports 14
+ * {SEC_READONLY14, 0x00000000U},
+ * Security write protection attribute setting slave ports 15
+ * {SEC_READONLY15, 0x00000000U}
+ */
};
/* AXI settings */
@@ -249,78 +263,78 @@
uint32_t reg;
uint32_t val;
} axi[] = {
- /* DRAM protection */
- /* AXI dram protected area division */
- {
- AXI_DPTDIVCR0, 0x0E0403F0U}, {
- AXI_DPTDIVCR1, 0x0E0407E0U}, {
- AXI_DPTDIVCR2, 0x0E080000U}, {
- AXI_DPTDIVCR3, 0x0E080000U}, {
- AXI_DPTDIVCR4, 0x0E080000U}, {
- AXI_DPTDIVCR5, 0x0E080000U}, {
- AXI_DPTDIVCR6, 0x0E080000U}, {
- AXI_DPTDIVCR7, 0x0E080000U}, {
- AXI_DPTDIVCR8, 0x0E080000U}, {
- AXI_DPTDIVCR9, 0x0E080000U}, {
- AXI_DPTDIVCR10, 0x0E080000U}, {
- AXI_DPTDIVCR11, 0x0E080000U}, {
- AXI_DPTDIVCR12, 0x0E080000U}, {
- AXI_DPTDIVCR13, 0x0E080000U}, {
- AXI_DPTDIVCR14, 0x0E080000U},
- /* AXI dram protected area setting */
- {
- AXI_DPTCR0, 0x0E000000U}, {
- AXI_DPTCR1, 0x0E000E0EU}, {
- AXI_DPTCR2, 0x0E000000U}, {
- AXI_DPTCR3, 0x0E000000U}, {
- AXI_DPTCR4, 0x0E000000U}, {
- AXI_DPTCR5, 0x0E000000U}, {
- AXI_DPTCR6, 0x0E000000U}, {
- AXI_DPTCR7, 0x0E000000U}, {
- AXI_DPTCR8, 0x0E000000U}, {
- AXI_DPTCR9, 0x0E000000U}, {
- AXI_DPTCR10, 0x0E000000U}, {
- AXI_DPTCR11, 0x0E000000U}, {
- AXI_DPTCR12, 0x0E000000U}, {
- AXI_DPTCR13, 0x0E000000U}, {
- AXI_DPTCR14, 0x0E000000U}, {
- AXI_DPTCR15, 0x0E000000U},
- /* SRAM ptotection */
- /* AXI sram protected area division */
- {
- AXI_SPTDIVCR0, 0x0E0E6304U}, {
- AXI_SPTDIVCR1, 0x0E0E6360U}, {
- AXI_SPTDIVCR2, 0x0E0E6360U}, {
- AXI_SPTDIVCR3, 0x0E0E6360U}, {
- AXI_SPTDIVCR4, 0x0E0E6360U}, {
- AXI_SPTDIVCR5, 0x0E0E6360U}, {
- AXI_SPTDIVCR6, 0x0E0E6360U}, {
- AXI_SPTDIVCR7, 0x0E0E6360U}, {
- AXI_SPTDIVCR8, 0x0E0E6360U}, {
- AXI_SPTDIVCR9, 0x0E0E6360U}, {
- AXI_SPTDIVCR10, 0x0E0E6360U}, {
- AXI_SPTDIVCR11, 0x0E0E6360U}, {
- AXI_SPTDIVCR12, 0x0E0E6360U}, {
- AXI_SPTDIVCR13, 0x0E0E6360U}, {
- AXI_SPTDIVCR14, 0x0E0E6360U},
- /* AXI sram protected area setting */
- {
- AXI_SPTCR0, 0x0E000E0EU}, {
- AXI_SPTCR1, 0x0E000000U}, {
- AXI_SPTCR2, 0x0E000000U}, {
- AXI_SPTCR3, 0x0E000000U}, {
- AXI_SPTCR4, 0x0E000000U}, {
- AXI_SPTCR5, 0x0E000000U}, {
- AXI_SPTCR6, 0x0E000000U}, {
- AXI_SPTCR7, 0x0E000000U}, {
- AXI_SPTCR8, 0x0E000000U}, {
- AXI_SPTCR9, 0x0E000000U}, {
- AXI_SPTCR10, 0x0E000000U}, {
- AXI_SPTCR11, 0x0E000000U}, {
- AXI_SPTCR12, 0x0E000000U}, {
- AXI_SPTCR13, 0x0E000000U}, {
- AXI_SPTCR14, 0x0E000000U}, {
- AXI_SPTCR15, 0x0E000000U}
+ /*
+ * DRAM protection
+ * AXI dram protected area division
+ */
+ {AXI_DPTDIVCR0, 0x0E0403F0U},
+ {AXI_DPTDIVCR1, 0x0E0407E0U},
+ {AXI_DPTDIVCR2, 0x0E080000U},
+ {AXI_DPTDIVCR3, 0x0E080000U},
+ {AXI_DPTDIVCR4, 0x0E080000U},
+ {AXI_DPTDIVCR5, 0x0E080000U},
+ {AXI_DPTDIVCR6, 0x0E080000U},
+ {AXI_DPTDIVCR7, 0x0E080000U},
+ {AXI_DPTDIVCR8, 0x0E080000U},
+ {AXI_DPTDIVCR9, 0x0E080000U},
+ {AXI_DPTDIVCR10, 0x0E080000U},
+ {AXI_DPTDIVCR11, 0x0E080000U},
+ {AXI_DPTDIVCR12, 0x0E080000U},
+ {AXI_DPTDIVCR13, 0x0E080000U},
+ {AXI_DPTDIVCR14, 0x0E080000U},
+ /* AXI dram protected area setting */
+ {AXI_DPTCR0, 0x0E000000U},
+ {AXI_DPTCR1, 0x0E000E0EU},
+ {AXI_DPTCR2, 0x0E000000U},
+ {AXI_DPTCR3, 0x0E000000U},
+ {AXI_DPTCR4, 0x0E000000U},
+ {AXI_DPTCR5, 0x0E000000U},
+ {AXI_DPTCR6, 0x0E000000U},
+ {AXI_DPTCR7, 0x0E000000U},
+ {AXI_DPTCR8, 0x0E000000U},
+ {AXI_DPTCR9, 0x0E000000U},
+ {AXI_DPTCR10, 0x0E000000U},
+ {AXI_DPTCR11, 0x0E000000U},
+ {AXI_DPTCR12, 0x0E000000U},
+ {AXI_DPTCR13, 0x0E000000U},
+ {AXI_DPTCR14, 0x0E000000U},
+ {AXI_DPTCR15, 0x0E000000U},
+ /*
+ * SRAM ptotection
+ * AXI sram protected area division
+ */
+ {AXI_SPTDIVCR0, 0x0E0E6304U},
+ {AXI_SPTDIVCR1, 0x0E0E6360U},
+ {AXI_SPTDIVCR2, 0x0E0E6360U},
+ {AXI_SPTDIVCR3, 0x0E0E6360U},
+ {AXI_SPTDIVCR4, 0x0E0E6360U},
+ {AXI_SPTDIVCR5, 0x0E0E6360U},
+ {AXI_SPTDIVCR6, 0x0E0E6360U},
+ {AXI_SPTDIVCR7, 0x0E0E6360U},
+ {AXI_SPTDIVCR8, 0x0E0E6360U},
+ {AXI_SPTDIVCR9, 0x0E0E6360U},
+ {AXI_SPTDIVCR10, 0x0E0E6360U},
+ {AXI_SPTDIVCR11, 0x0E0E6360U},
+ {AXI_SPTDIVCR12, 0x0E0E6360U},
+ {AXI_SPTDIVCR13, 0x0E0E6360U},
+ {AXI_SPTDIVCR14, 0x0E0E6360U},
+ /* AXI sram protected area setting */
+ {AXI_SPTCR0, 0x0E000E0EU},
+ {AXI_SPTCR1, 0x0E000000U},
+ {AXI_SPTCR2, 0x0E000000U},
+ {AXI_SPTCR3, 0x0E000000U},
+ {AXI_SPTCR4, 0x0E000000U},
+ {AXI_SPTCR5, 0x0E000000U},
+ {AXI_SPTCR6, 0x0E000000U},
+ {AXI_SPTCR7, 0x0E000000U},
+ {AXI_SPTCR8, 0x0E000000U},
+ {AXI_SPTCR9, 0x0E000000U},
+ {AXI_SPTCR10, 0x0E000000U},
+ {AXI_SPTCR11, 0x0E000000U},
+ {AXI_SPTCR12, 0x0E000000U},
+ {AXI_SPTCR13, 0x0E000000U},
+ {AXI_SPTCR14, 0x0E000000U},
+ {AXI_SPTCR15, 0x0E000000U}
};
static void lifec_security_setting(void)
@@ -342,11 +356,7 @@
void bl2_secure_setting(void)
{
- const uint32_t delay = 10;
-
lifec_security_setting();
axi_security_setting();
- rcar_micro_delay(delay);
-
- return;
+ rcar_micro_delay(10U);
}