diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
new file mode 100644
index 0000000..0befadf
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/mentor/mi2cv.h>
+#include <lib/mmio.h>
+
+#include <mv_ddr_if.h>
+#include <mvebu_def.h>
+#include <plat_marvell.h>
+
+#define MVEBU_CP_MPP_CTRL37_OFFS		20
+#define MVEBU_CP_MPP_CTRL38_OFFS		24
+#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA	0x2
+#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA	0x2
+
+#define MVEBU_MPP_CTRL_MASK			0xf
+
+/*
+ * This struct provides the DRAM training code with
+ * the appropriate board DRAM configuration
+ */
+struct mv_ddr_iface dram_iface_ap0 = {
+	.ap_base = MVEBU_REGS_BASE_AP(0),
+	.state = MV_DDR_IFACE_NRDY,
+	.validation = MV_DDR_MEMORY_CHECK,
+	.sscg = SSCG_EN,
+	.id = 0,
+	.iface_base_addr = 0,
+	.tm = {
+		DEBUG_LEVEL_ERROR,
+		0x1, /* active interfaces */
+		/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
+		{ { { {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0},
+		      {0x1, 0x0, 0, 0} },
+		   SPEED_BIN_DDR_2400T,		/* speed_bin */
+		   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+		   MV_DDR_DIE_CAP_8GBIT,	/* die capacity */
+		   MV_DDR_FREQ_SAR,		/* frequency */
+		   0, 0,			/* cas_l, cas_wl */
+		   MV_DDR_TEMP_LOW} },		/* temperature */
+#if DDR32
+		MV_DDR_32BIT_ECC_PUP8_BUS_MASK,	/* subphys mask */
+#else
+		MV_DDR_64BIT_ECC_PUP8_BUS_MASK,	/* subphys mask */
+#endif
+		MV_DDR_CFG_SPD,			/* ddr configuration data src */
+		NOT_COMBINED,			/* ddr twin-die combined*/
+		{ {0} },			/* raw spd data */
+		{0},				/* timing parameters */
+		{	/* electrical configuration */
+			{	/* memory electrical configuration */
+				MV_DDR_RTT_NOM_PARK_RZQ_DISABLE,  /* rtt_nom */
+				{	/* rtt_park 1cs */
+					MV_DDR_RTT_NOM_PARK_RZQ_DIV4,
+					/* rtt_park 2cs */
+					MV_DDR_RTT_NOM_PARK_RZQ_DIV1
+				},
+				{	/* rtt_wr 1cs */
+					MV_DDR_RTT_WR_DYN_ODT_OFF,
+					/* rtt_wr 2cs */
+					MV_DDR_RTT_WR_RZQ_DIV2
+				},
+				MV_DDR_DIC_RZQ_DIV7	/* dic */
+			},
+			{	/* phy electrical configuration */
+				MV_DDR_OHM_30,	/* data_drv_p */
+				MV_DDR_OHM_30,	/* data_drv_n */
+				MV_DDR_OHM_30,	/* ctrl_drv_p */
+				MV_DDR_OHM_30,	/* ctrl_drv_n */
+				{
+					MV_DDR_OHM_60,	/* odt_p 1cs */
+					MV_DDR_OHM_120	/* odt_p 2cs */
+				},
+				{
+					MV_DDR_OHM_60,	/* odt_n 1cs */
+					MV_DDR_OHM_120	/* odt_n 2cs */
+				},
+			},
+			{	/* mac electrical configuration */
+				MV_DDR_ODT_CFG_NORMAL,	/* odtcfg_pattern */
+				MV_DDR_ODT_CFG_ALWAYS_ON,/* odtcfg_write */
+				MV_DDR_ODT_CFG_NORMAL	/* odtcfg_read */
+			},
+		},
+	},
+};
+
+/* Pointer to the first DRAM interface in the system */
+struct mv_ddr_iface *ptr_iface = &dram_iface_ap0;
+
+struct mv_ddr_iface *mv_ddr_iface_get(void)
+{
+	/* Return current ddr interface */
+	return ptr_iface;
+}
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &ptr_iface->tm;
+}
+
+static void mpp_config(void)
+{
+	uintptr_t reg;
+	uint32_t val;
+
+	reg = MVEBU_CP_MPP_REGS(0, 4);
+	/* configure CP0 MPP 37 and 38 to i2c */
+	val = mmio_read_32(reg);
+	val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
+	val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA <<
+			MVEBU_CP_MPP_CTRL37_OFFS) |
+		(MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA <<
+			MVEBU_CP_MPP_CTRL38_OFFS);
+	mmio_write_32(reg, val);
+}
+
+/*
+ * This function may modify the default DRAM parameters
+ * based on information received from SPD or bootloader
+ * configuration located on non volatile storage
+ */
+void plat_marvell_dram_update_topology(void)
+{
+	struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
+
+	INFO("Gathering DRAM information\n");
+
+	if (tm->cfg_src == MV_DDR_CFG_SPD) {
+		/* configure MPPs to enable i2c */
+		mpp_config();
+
+		/* initialize i2c */
+		i2c_init((void *)MVEBU_CP0_I2C_BASE);
+
+		/* select SPD memory page 0 to access DRAM configuration */
+		i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
+
+		/* read data from spd */
+		i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
+			 sizeof(tm->spd_data.all_bytes));
+	}
+}
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
new file mode 100644
index 0000000..7debd65
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <armada_common.h>
+#include <mvebu_def.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map_cp0[] = {
+	/* CP0 SPI1 CS0 Direct Mode access */
+	{0xe800,	0x2000000,	AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	switch (base) {
+	case MVEBU_CP_REGS_BASE(0):
+		*win = amb_memory_map_cp0;
+		*size = ARRAY_SIZE(amb_memory_map_cp0);
+		return 0;
+	case MVEBU_CP_REGS_BASE(1):
+	case MVEBU_CP_REGS_BASE(2):
+	default:
+		*size = 0;
+		*win = 0;
+		return 1;
+	}
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+	/* SB (MCi0) PCIe0-2 on CP1 */
+	{0x00000000e2000000,		0x3000000,	MCI_0_TID},
+	/* SB (MCi1) PCIe0-2 on CP2 */
+	{0x00000000e5000000,		0x3000000,	MCI_1_TID},
+	/* SB (MCi0) internal regs */
+	{0x00000000f4000000,		0x2000000,	MCI_0_TID},
+	/* SB (MCi1) internal regs */
+	{0x00000000f6000000,		0x2000000,	MCI_1_TID},
+	/* MCI 0 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(0),	0x100000,	MCI_0_TID},
+	/* MCI 1 indirect window */
+	{MVEBU_MCI_REG_BASE_REMAP(1),	0x100000,	MCI_1_TID},
+#endif
+};
+
+/* Global Control Register - window default target */
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+	/*
+	 * PIDI == iMCIP AP to SB internal MoChi connection.
+	 * In other words CP0
+	 */
+	return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+				  uint32_t *size)
+{
+	*win = io_win_memory_map;
+	if (*win == NULL)
+		*size = 0;
+	else
+		*size = ARRAY_SIZE(io_win_memory_map);
+
+	return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+	/* SPI1_CS0 (RUNIT) window */
+	{0x00000000e8000000,	0x2000000,	RUNIT_TID},
+	/* PEX2_X1 window */
+	{0x00000000e1000000,	0x1000000,	PEX2_TID},
+	/* PEX1_X1 window */
+	{0x00000000e0000000,	0x1000000,	PEX1_TID},
+	/* PEX0_X4 window */
+	{0x00000000c0000000,	0x20000000,	PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+
+	/* PEX2_X1 window */
+	{0x00000000e4000000,	0x1000000,	PEX2_TID},
+	/* PEX1_X1 window */
+	{0x00000000e3000000,	0x1000000,	PEX1_TID},
+	/* PEX0_X4 window */
+	{0x00000000e2000000,	0x1000000,	PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp2[] = {
+
+	/* PEX2_X1 window */
+	{0x00000000e7000000,	0x1000000,	PEX2_TID},
+	/* PEX1_X1 window */
+	{0x00000000e6000000,	0x1000000,	PEX1_TID},
+	/* PEX0_X4 window */
+	{0x00000000e5000000,	0x1000000,	PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+			       uintptr_t base)
+{
+	switch (base) {
+	case MVEBU_CP_REGS_BASE(0):
+		*win = iob_memory_map_cp0;
+		*size = ARRAY_SIZE(iob_memory_map_cp0);
+		return 0;
+	case MVEBU_CP_REGS_BASE(1):
+		*win = iob_memory_map_cp1;
+		*size = ARRAY_SIZE(iob_memory_map_cp1);
+		return 0;
+	case MVEBU_CP_REGS_BASE(2):
+		*win = iob_memory_map_cp2;
+		*size = ARRAY_SIZE(iob_memory_map_cp2);
+		return 0;
+	default:
+		*size = 0;
+		*win = 0;
+		return 1;
+	}
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = {	/* IO window */
+#ifdef IMAGE_BLE
+	{0x00000000f2000000,	0x6000000,	IO_0_TID}, /* IO window */
+#else
+#if LLC_SRAM
+	{PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID},
+#endif
+	{0x00000000f2000000,	0xe000000,	IO_0_TID}, /* IO window */
+	{0x00000000c0000000,	0x30000000,	IO_0_TID}, /* IO window */
+	{0x0000002000000000,	0x70e000000,	IO_0_TID}, /* IO for CV-OS */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+	return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+			       uint32_t *size)
+{
+	*win = ccu_memory_map;
+	*size = ARRAY_SIZE(ccu_memory_map);
+
+	return 0;
+}
+
+#ifdef IMAGE_BLE
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+void *plat_get_skip_image_data(void)
+{
+	/* No recovery button on CN-9130 board? */
+	return NULL;
+}
+#endif
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
new file mode 100644
index 0000000..a866055
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/phy-porting-layer.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PHY_PORTING_LAYER_H
+#define __PHY_PORTING_LAYER_H
+
+
+#define MAX_LANE_NR		6
+#define XFI_PARAMS static const struct xfi_params
+
+
+XFI_PARAMS xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	/* AP0 */
+	{
+		/* CP 0 */
+		{
+			{ 0 }, /* Comphy0 not relevant*/
+			{ 0 }, /* Comphy1 not relevant*/
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0x1c,
+				.g1_emph = 0xe,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1 }, /* Comphy2 */
+			{ 0 }, /* Comphy3 not relevant*/
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0x1c,
+				.g1_emph = 0xe,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1 }, /* Comphy4 */
+			{ 0 }, /* Comphy5 not relevant*/
+		},
+#if CP_NUM > 1
+		/* CP 1 */
+		{
+			{ 0 }, /* Comphy0 not relevant*/
+			{ 0 }, /* Comphy1 not relevant*/
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0x1c,
+				.g1_emph = 0xe,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1 }, /* Comphy2 */
+			{ 0 }, /* Comphy3 not relevant*/
+			/* different from defaults */
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0xc,
+				.g1_emph = 0x5,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1}, /* Comphy4 */
+			{ 0 }, /* Comphy5 not relevant*/
+		},
+#if CP_NUM > 2
+		/* CP 2 */
+		{
+			{ 0 }, /* Comphy0 not relevant*/
+			{ 0 }, /* Comphy1 not relevant*/
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0x1c,
+				.g1_emph = 0xe,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1 }, /* Comphy2 */
+			{ 0 }, /* Comphy3 not relevant*/
+			{ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+					.align90 = 0x5f,
+				.g1_dfe_res = 0x2, .g1_amp = 0x1c,
+				.g1_emph = 0xe,
+				.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+				.g1_tx_emph_en = 0x1,
+				.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1,
+				.g1_rx_selmufi = 0x0,
+				.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+				.valid = 1 }, /* Comphy4 */
+			{ 0 }, /* Comphy5 not relevant*/
+		},
+#endif
+#endif
+	},
+};
+
+#define SATA_PARAMS static const struct sata_params
+SATA_PARAMS sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.g1_amp = 0x8, .g2_amp = 0xa,
+		.g3_amp = 0x1e,
+		.g1_emph = 0x1, .g2_emph = 0x2,
+		.g3_emph = 0xe,
+		.g1_emph_en = 0x1, .g2_emph_en = 0x1,
+		.g3_emph_en = 0x1,
+		.g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+		.g3_tx_amp_adj = 0x1,
+		.g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+		.g3_tx_emph_en = 0x0,
+		.g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+		.g3_tx_emph = 0x1,
+		.g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+		.g3_ffe_cap_sel = 0xf,
+		.align90 = 0x61,
+		.g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+		.g3_rx_selmuff = 0x3,
+		.g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+		.g3_rx_selmufi = 0x3,
+		.g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+		.g3_rx_selmupf = 0x2,
+		.g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+		.g3_rx_selmupi = 0x2,
+		.valid = 0x1
+	},
+};
+
+#endif /* __PHY_PORTING_LAYER_H */
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h b/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h
new file mode 100644
index 0000000..490be73
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/mvebu_def.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __MVEBU_DEF_H__
+#define __MVEBU_DEF_H__
+
+#include <a8k_plat_def.h>
+
+/*
+ * CN-9130 has single CP0 inside the package and 2 additional one
+ * from MoChi interface. In case of db-9130-modular board the MCI interface
+ * is routed to:
+ * - on-board CP115 (MCI0)
+ * - extension board CP115 (MCI1)
+ */
+#define CP_COUNT		CP_NUM
+#define MVEBU_SOC_AP807		1
+#define I2C_SPD_ADDR		0x53	/* Access SPD data */
+#define I2C_SPD_P0_ADDR		0x36	/* Select SPD data page 0 */
+
+#endif /* __MVEBU_DEF_H__ */
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/platform.mk b/plat/marvell/octeontx/otx2/t91/t9130/platform.mk
new file mode 100644
index 0000000..1e2716d
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/platform.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2018 Marvell International Ltd.
+#
+# SPDX-License-Identifier:	BSD-3-Clause
+# https://spdx.org/licenses
+#
+
+PCI_EP_SUPPORT		:= 0
+
+CP_NUM			:= 1
+$(eval $(call add_define,CP_NUM))
+
+DOIMAGE_SEC     	:=	tools/doimage/secure/sec_img_7K.cfg
+
+MARVELL_MOCHI_DRV	:=	drivers/marvell/mochi/ap807_setup.c
+
+BOARD_DIR		:= $(shell dirname $(lastword $(MAKEFILE_LIST)))
+include plat/marvell/armada/a8k/common/a8k_common.mk
+
+include plat/marvell/armada/common/marvell_common.mk