plat: marvell: octeontx: add support for t9130
CN-9130 has single CP0 inside the package and 2 additional one from MoChi
interface. In case of db-9130-modular board the MCI interface is routed to:
- on-board CP115 (MCI0)
- extension board CP115 (MCI1)
The board is based on DIMM DDR.
The 9130 has up to 3CP, and decoding windows looks like below:
(free for further use)
.----------. 0xf800 0000
| CP2 CFG |
'----------' 0xf600 0000
| CP1 CFG |
'----------' 0xf400 0000
| CP0 CFG |
'----------' 0xf200 0000
| AP CFG |
'----------' 0xf000 0000
(free for further use)
.----------. 0xec00 0000
| SPI |
| MEM_MAP | (Currently not opened)
'----------' 0xe800 0000
| PEX2_CP2 |
'----------' 0xe700 0000
| PEX1_CP2 |
'----------' 0xe600 0000
| PEX0-CP2 |
'----------'
.----------. 0xe500 0000
| PEX2_CP1 |
'----------' 0xe400 0000
| PEX1_CP1 |
'----------' 0xe300 0000
| PEX0-CP1 |
'----------'
.----------. 0xe200 0000
| PEX2-CP0 |
'----------' 0xe100 0000
| PEX1-CP0 |
'----------' 0xe000 0000
| PEX0-CP0 |
| 512MB |
'----------' 0xc000 0000
Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
new file mode 100644
index 0000000..7debd65
--- /dev/null
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/marvell_plat_config.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#include <armada_common.h>
+#include <mvebu_def.h>
+
+/*
+ * If bootrom is currently at BLE there's no need to include the memory
+ * maps structure at this point
+ */
+#ifndef IMAGE_BLE
+
+/*****************************************************************************
+ * AMB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win amb_memory_map_cp0[] = {
+ /* CP0 SPI1 CS0 Direct Mode access */
+ {0xe800, 0x2000000, AMB_SPI1_CS0_ID},
+};
+
+int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = amb_memory_map_cp0;
+ *size = ARRAY_SIZE(amb_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ case MVEBU_CP_REGS_BASE(2):
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * IO WIN Configuration
+ *****************************************************************************
+ */
+struct addr_map_win io_win_memory_map[] = {
+#ifndef IMAGE_BLE
+ /* SB (MCi0) PCIe0-2 on CP1 */
+ {0x00000000e2000000, 0x3000000, MCI_0_TID},
+ /* SB (MCi1) PCIe0-2 on CP2 */
+ {0x00000000e5000000, 0x3000000, MCI_1_TID},
+ /* SB (MCi0) internal regs */
+ {0x00000000f4000000, 0x2000000, MCI_0_TID},
+ /* SB (MCi1) internal regs */
+ {0x00000000f6000000, 0x2000000, MCI_1_TID},
+ /* MCI 0 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
+ /* MCI 1 indirect window */
+ {MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
+#endif
+};
+
+/* Global Control Register - window default target */
+uint32_t marvell_get_io_win_gcr_target(int ap_index)
+{
+ /*
+ * PIDI == iMCIP AP to SB internal MoChi connection.
+ * In other words CP0
+ */
+ return PIDI_TID;
+}
+
+int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = io_win_memory_map;
+ if (*win == NULL)
+ *size = 0;
+ else
+ *size = ARRAY_SIZE(io_win_memory_map);
+
+ return 0;
+}
+
+#ifndef IMAGE_BLE
+/*****************************************************************************
+ * IOB Configuration
+ *****************************************************************************
+ */
+struct addr_map_win iob_memory_map_cp0[] = {
+ /* SPI1_CS0 (RUNIT) window */
+ {0x00000000e8000000, 0x2000000, RUNIT_TID},
+ /* PEX2_X1 window */
+ {0x00000000e1000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e0000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000c0000000, 0x20000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp1[] = {
+
+ /* PEX2_X1 window */
+ {0x00000000e4000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e3000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000e2000000, 0x1000000, PEX0_TID},
+};
+
+struct addr_map_win iob_memory_map_cp2[] = {
+
+ /* PEX2_X1 window */
+ {0x00000000e7000000, 0x1000000, PEX2_TID},
+ /* PEX1_X1 window */
+ {0x00000000e6000000, 0x1000000, PEX1_TID},
+ /* PEX0_X4 window */
+ {0x00000000e5000000, 0x1000000, PEX0_TID},
+};
+
+int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
+ uintptr_t base)
+{
+ switch (base) {
+ case MVEBU_CP_REGS_BASE(0):
+ *win = iob_memory_map_cp0;
+ *size = ARRAY_SIZE(iob_memory_map_cp0);
+ return 0;
+ case MVEBU_CP_REGS_BASE(1):
+ *win = iob_memory_map_cp1;
+ *size = ARRAY_SIZE(iob_memory_map_cp1);
+ return 0;
+ case MVEBU_CP_REGS_BASE(2):
+ *win = iob_memory_map_cp2;
+ *size = ARRAY_SIZE(iob_memory_map_cp2);
+ return 0;
+ default:
+ *size = 0;
+ *win = 0;
+ return 1;
+ }
+}
+#endif
+
+/*****************************************************************************
+ * CCU Configuration
+ *****************************************************************************
+ */
+struct addr_map_win ccu_memory_map[] = { /* IO window */
+#ifdef IMAGE_BLE
+ {0x00000000f2000000, 0x6000000, IO_0_TID}, /* IO window */
+#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, DRAM_0_TID},
+#endif
+ {0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
+ {0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
+ {0x0000002000000000, 0x70e000000, IO_0_TID}, /* IO for CV-OS */
+#endif
+};
+
+uint32_t marvell_get_ccu_gcr_target(int ap)
+{
+ return DRAM_0_TID;
+}
+
+int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
+ uint32_t *size)
+{
+ *win = ccu_memory_map;
+ *size = ARRAY_SIZE(ccu_memory_map);
+
+ return 0;
+}
+
+#ifdef IMAGE_BLE
+/*****************************************************************************
+ * SKIP IMAGE Configuration
+ *****************************************************************************
+ */
+void *plat_get_skip_image_data(void)
+{
+ /* No recovery button on CN-9130 board? */
+ return NULL;
+}
+#endif