nxp:driver for crypto h/w accelerator caam
NXP has hardware crypto accelerator called CAAM.
- Work with Job ring
- Jobs are submitted to CAAM in the form of 64 word
descriptor.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I02bcfce68143b8630e1833a74c4b126972f4323d
diff --git a/drivers/nxp/crypto/caam/caam.mk b/drivers/nxp/crypto/caam/caam.mk
new file mode 100644
index 0000000..548c7b1
--- /dev/null
+++ b/drivers/nxp/crypto/caam/caam.mk
@@ -0,0 +1,28 @@
+#
+# Copyright 2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+ifeq (${ADD_CAAM},)
+
+ADD_CAAM := 1
+CAAM_DRIVER_PATH := drivers/nxp/crypto/caam
+
+CAAM_DRIVER_SOURCES += $(wildcard $(CAAM_DRIVER_PATH)/src/*.c)
+
+PLAT_INCLUDES += -I$(CAAM_DRIVER_PATH)/include
+
+ifeq (${BL_COMM_CRYPTO_NEEDED},yes)
+BL_COMMON_SOURCES += ${CAAM_DRIVER_SOURCES}
+else
+ifeq (${BL2_CRYPTO_NEEDED},yes)
+BL2_SOURCES += ${CAAM_DRIVER_SOURCES}
+endif
+ifeq (${BL31_CRYPTO_NEEDED},yes)
+BL31_SOURCES += ${CAAM_DRIVER_SOURCES}
+endif
+endif
+
+endif
diff --git a/drivers/nxp/crypto/caam/include/caam.h b/drivers/nxp/crypto/caam/include/caam.h
new file mode 100644
index 0000000..580e133
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/caam.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CAAM_H
+#define CAAM_H
+
+#include "caam_io.h"
+#include "sec_jr_driver.h"
+
+
+/* Job ring 3 is reserved for usage by sec firmware */
+#define DEFAULT_JR 3
+
+#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_2)
+#define CAAM_JR0_OFFSET 0x10000
+#define CAAM_JR1_OFFSET 0x20000
+#define CAAM_JR2_OFFSET 0x30000
+#define CAAM_JR3_OFFSET 0x40000
+#endif
+
+enum sig_alg {
+ RSA,
+ ECC
+};
+
+/* This function does basic SEC Initialization */
+int sec_init(uintptr_t nxp_caam_addr);
+int config_sec_block(void);
+uintptr_t get_caam_addr(void);
+
+/* This function is used to submit jobs to JR */
+int run_descriptor_jr(struct job_descriptor *desc);
+
+/* This function is used to instatiate the HW RNG is already not instantiated */
+int hw_rng_instantiate(void);
+
+/* This function is used to return random bytes of byte_len from HW RNG */
+int get_rand_bytes_hw(uint8_t *bytes, int byte_len);
+
+/* This function is used to set the hw unique key from HW CAAM */
+int get_hw_unq_key_blob_hw(uint8_t *hw_key, int size);
+
+/* This function is used to fetch random number from
+ * CAAM of length either of 4 bytes or 8 bytes depending
+ * rngWidth value.
+ */
+unsigned long long get_random(int rngWidth);
+
+#endif /* CAAM_H */
diff --git a/drivers/nxp/crypto/caam/include/caam_io.h b/drivers/nxp/crypto/caam/include/caam_io.h
new file mode 100644
index 0000000..4fdb04d
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/caam_io.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2018-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef CAAM_IO_H
+#define CAAM_IO_H
+
+#include <endian.h>
+#include <lib/mmio.h>
+
+typedef unsigned long long phys_addr_t;
+typedef unsigned long long phys_size_t;
+
+/* Return higher 32 bits of physical address */
+#define PHYS_ADDR_HI(phys_addr) \
+ (uint32_t)(((uint64_t)phys_addr) >> 32)
+
+/* Return lower 32 bits of physical address */
+#define PHYS_ADDR_LO(phys_addr) \
+ (uint32_t)(((uint64_t)phys_addr) & 0xFFFFFFFF)
+
+#ifdef NXP_SEC_BE
+#define sec_in32(a) bswap32(mmio_read_32((uintptr_t)(a)))
+#define sec_out32(a, v) mmio_write_32((uintptr_t)(a), bswap32(v))
+#define sec_in64(addr) ( \
+ ((uint64_t)sec_in32((uintptr_t)(addr)) << 32) | \
+ (sec_in32(((uintptr_t)(addr)) + 4)))
+#define sec_out64(addr, val) ({ \
+ sec_out32(((uintptr_t)(addr)), (uint32_t)((val) >> 32)); \
+ sec_out32(((uintptr_t)(addr)) + 4, (uint32_t)(val)); })
+#elif defined(NXP_SEC_LE)
+#define sec_in32(a) mmio_read_32((uintptr_t)(a))
+#define sec_out32(a, v) mmio_write_32((uintptr_t)(a), (v))
+#define sec_in64(addr) ( \
+ ((uint64_t)sec_in32((uintptr_t)(addr) + 4) << 32) | \
+ (sec_in32((uintptr_t)(addr))))
+#define sec_out64(addr, val) ({ \
+ sec_out32(((uintptr_t)(addr)) + 4, (uint32_t)((val) >> 32)); \
+ sec_out32(((uintptr_t)(addr)), (uint32_t)(val)); })
+#else
+#error Please define CCSR SEC register endianness
+#endif
+
+static inline void *ptov(phys_addr_t *ptr)
+{
+ return (void *)ptr;
+}
+
+static inline phys_addr_t *vtop(void *ptr)
+{
+ return (phys_addr_t *)ptr;
+}
+#endif /* CAAM_IO_H */
diff --git a/drivers/nxp/crypto/caam/include/hash.h b/drivers/nxp/crypto/caam/include/hash.h
new file mode 100644
index 0000000..946087d
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/hash.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef __HASH_H__
+#define __HASH_H__
+
+#include <stdbool.h>
+
+/* List of hash algorithms */
+enum hash_algo {
+ SHA1 = 0,
+ SHA256
+};
+
+/* number of bytes in the SHA256-256 digest */
+#define SHA256_DIGEST_SIZE 32
+
+/*
+ * number of words in the digest - Digest is kept internally
+ * as 8 32-bit words
+ */
+#define _SHA256_DIGEST_LENGTH 8
+
+/*
+ * block length - A block, treated as a sequence of
+ * 32-bit words
+ */
+#define SHA256_BLOCK_LENGTH 16
+
+/* number of bytes in the block */
+#define SHA256_DATA_SIZE 64
+
+#define MAX_SG 12
+
+struct sg_entry {
+#if defined(NXP_SEC_LE)
+ uint32_t addr_lo; /* Memory Address - lo */
+ uint32_t addr_hi; /* Memory Address of start of buffer - hi */
+#else
+ uint32_t addr_hi; /* Memory Address of start of buffer - hi */
+ uint32_t addr_lo; /* Memory Address - lo */
+#endif
+
+ uint32_t len_flag; /* Length of the data in the frame */
+#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF
+#define SG_ENTRY_EXTENSION_BIT 0x80000000
+#define SG_ENTRY_FINAL_BIT 0x40000000
+ uint32_t bpid_offset;
+#define SG_ENTRY_BPID_MASK 0x00FF0000
+#define SG_ENTRY_BPID_SHIFT 16
+#define SG_ENTRY_OFFSET_MASK 0x00001FFF
+#define SG_ENTRY_OFFSET_SHIFT 0
+};
+
+/*
+ * SHA256-256 context
+ * contain the following fields
+ * State
+ * count low
+ * count high
+ * block data buffer
+ * index to the buffer
+ */
+struct hash_ctx {
+ struct sg_entry sg_tbl[MAX_SG];
+ uint32_t hash_desc[64];
+ uint8_t hash[SHA256_DIGEST_SIZE];
+ uint32_t sg_num;
+ uint32_t len;
+ uint8_t *data;
+ enum hash_algo algo;
+ bool active;
+};
+
+int hash_init(enum hash_algo algo, void **ctx);
+int hash_update(enum hash_algo algo, void *context, void *data_ptr,
+ unsigned int data_len);
+int hash_final(enum hash_algo algo, void *context, void *hash_ptr,
+ unsigned int hash_len);
+
+#endif
diff --git a/drivers/nxp/crypto/caam/include/jobdesc.h b/drivers/nxp/crypto/caam/include/jobdesc.h
new file mode 100644
index 0000000..5921f7b
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/jobdesc.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef __JOBDESC_H
+#define __JOBDESC_H
+
+#include <rsa.h>
+
+#define DESC_LEN_MASK 0x7f
+#define DESC_START_SHIFT 16
+
+#define KEY_BLOB_SIZE 32
+#define MAC_SIZE 16
+
+#define KEY_IDNFR_SZ_BYTES 16
+#define CLASS_SHIFT 25
+#define CLASS_2 (0x02 << CLASS_SHIFT)
+
+#define CMD_SHIFT 27
+#define CMD_OPERATION (U(0x10) << CMD_SHIFT)
+
+#define OP_TYPE_SHIFT 24
+#define OP_TYPE_ENCAP_PROTOCOL (0x07 << OP_TYPE_SHIFT)
+
+/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_SHIFT 16
+#define OP_PCLID_BLOB (0x0d << OP_PCLID_SHIFT)
+
+#define BLOB_PROTO_INFO 0x00000002
+
+uint32_t desc_length(uint32_t *desc);
+
+int cnstr_rng_jobdesc(uint32_t *desc, uint32_t state_handle,
+ uint32_t *add_inp, uint32_t add_ip_len,
+ uint8_t *out_data, uint32_t len);
+
+int cnstr_rng_instantiate_jobdesc(uint32_t *desc);
+
+/* Construct descriptor to generate hw key blob */
+int cnstr_hw_encap_blob_jobdesc(uint32_t *desc,
+ uint8_t *key_idnfr, uint32_t key_sz,
+ uint32_t key_class, uint8_t *plain_txt,
+ uint32_t in_sz, uint8_t *enc_blob,
+ uint32_t out_sz, uint32_t operation);
+
+void cnstr_hash_jobdesc(uint32_t *desc, uint8_t *msg, uint32_t msgsz,
+ uint8_t *digest);
+
+void cnstr_jobdesc_pkha_rsaexp(uint32_t *desc,
+ struct pk_in_params *pkin, uint8_t *out,
+ uint32_t out_siz);
+#endif
diff --git a/drivers/nxp/crypto/caam/include/jr_driver_config.h b/drivers/nxp/crypto/caam/include/jr_driver_config.h
new file mode 100644
index 0000000..f25c42e
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/jr_driver_config.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _JR_DRIVER_CONFIG_H_
+#define _JR_DRIVER_CONFIG_H_
+
+/* Helper defines */
+
+ /* Define used for setting a flag on */
+#define ON 1
+ /* Define used for setting a flag off */
+#define OFF 0
+
+ /* SEC is configured to start work in polling mode, */
+#define SEC_STARTUP_POLLING_MODE 0
+/*
+ * SEC is configured to start work in interrupt mode,
+ * when configured for NAPI notification style.
+ */
+#define SEC_STARTUP_INTERRUPT_MODE 1
+
+/*
+ * SEC driver will use ONLY interrupts to receive notifications
+ * for processed packets from SEC engine hardware.
+ */
+#define SEC_NOTIFICATION_TYPE_IRQ 1
+/*
+ * SEC driver will use ONLY polling to receive notifications
+ * for processed packets from SEC engine hardware.
+ */
+#define SEC_NOTIFICATION_TYPE_POLL 2
+
+/*
+ * Determines how SEC user space driver will receive notifications
+ * for processed packets from SEC engine.
+ * Valid values are: #SEC_NOTIFICATION_TYPE_POLL, #SEC_NOTIFICATION_TYPE_IRQ
+ */
+#define SEC_NOTIFICATION_TYPE SEC_NOTIFICATION_TYPE_POLL
+
+ /* Maximum number of job rings supported by SEC hardware */
+#define MAX_SEC_JOB_RINGS 1
+
+/*
+ * Size of cryptographic context that is used directly in communicating
+ * with SEC device.
+ * SEC device works only with physical addresses. This is the maximum size
+ * for a SEC descriptor ( = 64 words).
+ */
+
+#define SEC_CRYPTO_DESCRIPTOR_SIZE 256
+
+/*
+ * Size of job descriptor submitted to SEC device for each packet to be
+ * processed.
+ * Job descriptor contains 3 DMA address pointers:
+ * - to shared descriptor, to input buffer and to output buffer.
+ * The job descriptor contains other SEC specific commands as well:
+ * - HEADER command, SEQ IN PTR command SEQ OUT PTR command and opaque
+ * data, each measuring 4 bytes.
+ * Job descriptor size, depending on physical address representation:
+ * - 32 bit - size is 28 bytes - cacheline-aligned size is 64 bytes
+ * - 36 bit - size is 40 bytes - cacheline-aligned size is 64 bytes
+ * @note: Job descriptor must be cacheline-aligned to ensure efficient memory
+ * access.
+ * @note: If other format is used for job descriptor, then the size must be
+ * revised.
+ */
+
+#define SEC_JOB_DESCRIPTOR_SIZE 64
+
+/*
+ * Size of one entry in the input ring of a job ring.
+ * Input ring contains pointers to job descriptors.
+ * The memory used for an input ring and output ring must be physically
+ * contiguous.
+ */
+
+#define SEC_JOB_INPUT_RING_ENTRY_SIZE sizeof(phys_addr_t)
+
+/*
+ * Size of one entry in the output ring of a job ring.
+ * Output ring entry is a pointer to a job descriptor followed by a 4 byte
+ * status word.
+ * The memory used for an input ring and output ring must be physically
+ * contiguous.
+ * @note If desired to use also the optional SEQ OUT indication in output
+ * ring entries, then 4 more bytes must be added to the size.
+ */
+
+#define SEC_JOB_OUTPUT_RING_ENTRY_SIZE (SEC_JOB_INPUT_RING_ENTRY_SIZE + 4)
+
+ /* DMA memory required for an input ring of a job ring. */
+#define SEC_DMA_MEM_INPUT_RING_SIZE \
+ ((SEC_JOB_INPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
+
+/*
+ * DMA memory required for an output ring of a job ring.
+ * Required extra 4 byte for status word per each entry.
+ */
+#define SEC_DMA_MEM_OUTPUT_RING_SIZE \
+ ((SEC_JOB_OUTPUT_RING_ENTRY_SIZE) * (SEC_JOB_RING_SIZE))
+
+ /* DMA memory required for descriptors of a job ring. */
+#define SEC_DMA_MEM_DESCRIPTORS \
+ ((SEC_CRYPTO_DESCRIPTOR_SIZE)*(SEC_JOB_RING_SIZE))
+
+ /* DMA memory required for a job ring, including both input output rings. */
+#define SEC_DMA_MEM_JOB_RING_SIZE \
+ ((SEC_DMA_MEM_INPUT_RING_SIZE) + \
+ (SEC_DMA_MEM_OUTPUT_RING_SIZE))
+
+/*
+ * When calling sec_init() UA will provide an area of virtual memory
+ * of size #SEC_DMA_MEMORY_SIZE to be used internally by the driver
+ * to allocate data (like SEC descriptors) that needs to be passed to
+ * SEC device in physical addressing and later on retrieved from SEC device.
+ * At initialization the UA provides specialized ptov/vtop functions/macros to
+ * translate addresses allocated from this memory area.
+ */
+#define SEC_DMA_MEMORY_SIZE \
+ ((SEC_DMA_MEM_JOB_RING_SIZE) * (MAX_SEC_JOB_RINGS))
+
+/*
+ * SEC DEVICE related configuration.
+
+ * Enable/Disable logging support at compile time.
+ * Valid values:
+ * ON - enable logging
+ * OFF - disable logging
+ * The messages are logged at stdout.
+ */
+
+#define SEC_DRIVER_LOGGING OFF
+
+/*
+ * Configure logging level at compile time.
+ * Valid values:
+ * SEC_DRIVER_LOG_ERROR - log only errors
+ * SEC_DRIVER_LOG_INFO - log errors and info messages
+ * SEC_DRIVER_LOG_DEBUG - log errors, info and debug messages
+ */
+
+#define SEC_DRIVER_LOGGING_LEVEL SEC_DRIVER_LOG_DEBUG
+
+/*
+ * SEC JOB RING related configuration.
+
+ * Configure the size of the JOB RING.
+ * The maximum size of the ring is hardware limited to 1024.
+ * However the number of packets in flight in a time interval of
+ * 1ms can be calculated
+ * from the traffic rate (Mbps) and packet size.
+ * Here it was considered a packet size of 40 bytes.
+ * @note Round up to nearest power of 2 for optimized update
+ * of producer/consumer indexes of each job ring
+ * \todo Should set to 750, according to the calculation above, but
+ * the JR size must be power of 2, thus the next closest value must
+ * be chosen (i.e. 512 since 1024 is not available)
+ * For firmware choose this to be 16
+ */
+
+#define SEC_JOB_RING_SIZE 16
+
+/*
+ * Interrupt coalescing related configuration.
+ * NOTE: SEC hardware enabled interrupt
+ * coalescing is not supported on SEC version 3.1!
+ * SEC version 4.4 has support for interrupt
+ * coalescing.
+ */
+
+#if SEC_NOTIFICATION_TYPE != SEC_NOTIFICATION_TYPE_POLL
+
+#define SEC_INT_COALESCING_ENABLE ON
+/*
+ * Interrupt Coalescing Descriptor Count Threshold.
+ * While interrupt coalescing is enabled (ICEN=1), this value determines
+ * how many Descriptors are completed before raising an interrupt.
+ * Valid values for this field are from 0 to 255.
+ * Note that a value of 1 functionally defeats the advantages of interrupt
+ * coalescing since the threshold value is reached each time that a
+ * Job Descriptor is completed. A value of 0 is treated in the same
+ * manner as a value of 1.
+ *
+ */
+#define SEC_INTERRUPT_COALESCING_DESCRIPTOR_COUNT_THRESH 10
+
+/*
+ * Interrupt Coalescing Timer Threshold.
+ * While interrupt coalescing is enabled (ICEN=1), this value determines the
+ * maximum amount of time after processing a Descriptor before raising an
+ * interrupt.
+ * The threshold value is represented in units equal to 64 CAAM interface
+ * clocks. Valid values for this field are from 1 to 65535.
+ * A value of 0 results in behavior identical to that when interrupt
+ * coalescing is disabled.
+ */
+#define SEC_INTERRUPT_COALESCING_TIMER_THRESH 100
+#endif /* SEC_NOTIFICATION_TYPE_POLL */
+
+#endif /* _JR_DRIVER_CONFIG_H_ */
diff --git a/drivers/nxp/crypto/caam/include/rsa.h b/drivers/nxp/crypto/caam/include/rsa.h
new file mode 100644
index 0000000..bd5dc71
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/rsa.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _RSA_H__
+#define _RSA_H__
+
+/* RSA key size defines */
+#define RSA_4K_KEY_SZ 4096
+#define RSA_4K_KEY_SZ_BYTES (RSA_4K_KEY_SZ/8)
+#define RSA_2K_KEY_SZ 2048
+#define RSA_2K_KEY_SZ_BYTES (RSA_2K_KEY_SZ/8)
+#define RSA_1K_KEY_SZ 1024
+#define RSA_1K_KEY_SZ_BYTES (RSA_1K_KEY_SZ/8)
+
+#define SHA256_BYTES (256/8)
+
+struct pk_in_params {
+ uint8_t *e;
+ uint32_t e_siz;
+ uint8_t *n;
+ uint32_t n_siz;
+ uint8_t *a;
+ uint32_t a_siz;
+ uint8_t *b;
+ uint32_t b_siz;
+};
+
+struct rsa_context {
+ struct pk_in_params pkin;
+};
+
+int rsa_verify_signature(void *hash_ptr, unsigned int hash_len,
+ void *sig_ptr, unsigned int sig_len,
+ void *pk_ptr, unsigned int pk_len);
+
+#endif
diff --git a/drivers/nxp/crypto/caam/include/sec_hw_specific.h b/drivers/nxp/crypto/caam/include/sec_hw_specific.h
new file mode 100644
index 0000000..a82a1a0
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/sec_hw_specific.h
@@ -0,0 +1,506 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _SEC_HW_SPECIFIC_H_
+#define _SEC_HW_SPECIFIC_H_
+
+#include "caam.h"
+#include "sec_jr_driver.h"
+
+ /* DEFINES AND MACROS */
+
+/* Used to retry resetting a job ring in SEC hardware. */
+#define SEC_TIMEOUT 100000
+
+/*
+ * Offset to the registers of a job ring.
+ *Is different for each job ring.
+ */
+#define CHAN_BASE(jr) ((phys_addr_t)(jr)->register_base_addr)
+
+#define unlikely(x) __builtin_expect(!!(x), 0)
+
+#define SEC_JOB_RING_IS_FULL(pi, ci, ring_max_size, ring_threshold) \
+ ((((pi) + 1 + ((ring_max_size) - (ring_threshold))) & \
+ (ring_max_size - 1)) == ((ci)))
+
+#define SEC_CIRCULAR_COUNTER(x, max) (((x) + 1) & (max - 1))
+
+ /* Struct representing various job ring registers */
+struct jobring_regs {
+#ifdef NXP_SEC_BE
+ unsigned int irba_h;
+ unsigned int irba_l;
+#else
+ unsigned int irba_l;
+ unsigned int irba_h;
+#endif
+ unsigned int rsvd1;
+ unsigned int irs;
+ unsigned int rsvd2;
+ unsigned int irsa;
+ unsigned int rsvd3;
+ unsigned int irja;
+#ifdef NXP_SEC_BE
+ unsigned int orba_h;
+ unsigned int orba_l;
+#else
+ unsigned int orba_l;
+ unsigned int orba_h;
+#endif
+ unsigned int rsvd4;
+ unsigned int ors;
+ unsigned int rsvd5;
+ unsigned int orjr;
+ unsigned int rsvd6;
+ unsigned int orsf;
+ unsigned int rsvd7;
+ unsigned int jrsta;
+ unsigned int rsvd8;
+ unsigned int jrint;
+ unsigned int jrcfg0;
+ unsigned int jrcfg1;
+ unsigned int rsvd9;
+ unsigned int irri;
+ unsigned int rsvd10;
+ unsigned int orwi;
+ unsigned int rsvd11;
+ unsigned int jrcr;
+};
+
+ /* Offsets representing common SEC Registers */
+#define SEC_REG_MCFGR_OFFSET 0x0004
+#define SEC_REG_SCFGR_OFFSET 0x000C
+#define SEC_REG_JR0ICIDR_MS_OFFSET 0x0010
+#define SEC_REG_JR0ICIDR_LS_OFFSET 0x0014
+#define SEC_REG_JR1ICIDR_MS_OFFSET 0x0018
+#define SEC_REG_JR1ICIDR_LS_OFFSET 0x001C
+#define SEC_REG_JR2ICIDR_MS_OFFSET 0x0020
+#define SEC_REG_JR2ICIDR_LS_OFFSET 0x0024
+#define SEC_REG_JR3ICIDR_MS_OFFSET 0x0028
+#define SEC_REG_JR3ICIDR_LS_OFFSET 0x002C
+#define SEC_REG_JRSTARTR_OFFSET 0x005C
+#define SEC_REG_CTPR_MS_OFFSET 0x0FA8
+
+ /* Offsets representing various RNG registers */
+#define RNG_REG_RTMCTL_OFFSET 0x0600
+#define RNG_REG_RTSDCTL_OFFSET 0x0610
+#define RNG_REG_RTFRQMIN_OFFSET 0x0618
+#define RNG_REG_RTFRQMAX_OFFSET 0x061C
+#define RNG_REG_RDSTA_OFFSET 0x06C0
+#define ALG_AAI_SH_SHIFT 4
+
+ /* SEC Registers Bitmasks */
+#define MCFGR_PS_SHIFT 16
+#define MCFGR_AWCACHE_SHIFT 8
+#define MCFGR_AWCACHE_MASK (0xF << MCFGR_AWCACHE_SHIFT)
+#define MCFGR_ARCACHE_SHIFT 12
+#define MCFGR_ARCACHE_MASK (0xF << MCFGR_ARCACHE_SHIFT)
+
+#define SCFGR_RNGSH0 0x00000200
+#define SCFGR_VIRT_EN 0x00008000
+
+#define JRICID_MS_LICID 0x80000000
+#define JRICID_MS_LAMTD 0x00020000
+#define JRICID_MS_AMTDT 0x00010000
+#define JRICID_MS_TZ 0x00008000
+#define JRICID_LS_SDID_MASK 0x00000FFF
+#define JRICID_LS_NSEQID_MASK 0x0FFF0000
+#define JRICID_LS_NSEQID_SHIFT 16
+#define JRICID_LS_SEQID_MASK 0x00000FFF
+
+#define JRSTARTR_STARTJR0 0x00000001
+#define JRSTARTR_STARTJR1 0x00000002
+#define JRSTARTR_STARTJR2 0x00000004
+#define JRSTARTR_STARTJR3 0x00000008
+
+#define CTPR_VIRT_EN_POR 0x00000002
+#define CTPR_VIRT_EN_INC 0x00000001
+
+ /* RNG RDSTA bitmask */
+#define RNG_STATE0_HANDLE_INSTANTIATED 0x00000001
+#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */
+ /* use von Neumann data in both entropy shifter and statistical checker */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_SC 0
+ /* use raw data in both entropy shifter and statistical checker */
+#define RTMCTL_SAMP_MODE_RAW_ES_SC 1
+ /* use von Neumann data in entropy shifter, raw data in statistical checker */
+#define RTMCTL_SAMP_MODE_VON_NEUMANN_ES_RAW_SC 2
+ /* invalid combination */
+#define RTMCTL_SAMP_MODE_INVALID 3
+#define RTSDCTL_ENT_DLY_MIN 3200
+#define RTSDCTL_ENT_DLY_MAX 12800
+#define RTSDCTL_ENT_DLY_SHIFT 16
+#define RTSDCTL_ENT_DLY_MASK (U(0xffff) << RTSDCTL_ENT_DLY_SHIFT)
+#define RTFRQMAX_DISABLE (1 << 20)
+
+ /* Constants for error handling on job ring */
+#define JR_REG_JRINT_ERR_TYPE_SHIFT 8
+#define JR_REG_JRINT_ERR_ORWI_SHIFT 16
+#define JR_REG_JRINIT_JRE_SHIFT 1
+
+#define JRINT_JRE (1 << JR_REG_JRINIT_JRE_SHIFT)
+#define JRINT_ERR_WRITE_STATUS (1 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_INPUT_BASE (3 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_OUTPUT_BASE (4 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_IRBA (5 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_ORBA (6 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_RES_B4_HALT (7 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_REM_TOO_MANY (8 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_ADD_TOO_MANY (9 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_HALT_MASK 0x0C
+#define JRINT_ERR_HALT_INPROGRESS 0x04
+#define JRINT_ERR_HALT_COMPLETE 0x08
+
+#define JR_REG_JRCR_VAL_RESET 0x00000001
+
+#define JR_REG_JRCFG_LO_ICTT_SHIFT 0x10
+#define JR_REG_JRCFG_LO_ICDCT_SHIFT 0x08
+#define JR_REG_JRCFG_LO_ICEN_EN 0x02
+#define JR_REG_JRCFG_LO_IMSK_EN 0x01
+
+ /* Constants for Descriptor Processing errors */
+#define SEC_HW_ERR_SSRC_NO_SRC 0x00
+#define SEC_HW_ERR_SSRC_CCB_ERR 0x02
+#define SEC_HW_ERR_SSRC_JMP_HALT_U 0x03
+#define SEC_HW_ERR_SSRC_DECO 0x04
+#define SEC_HW_ERR_SSRC_JR 0x06
+#define SEC_HW_ERR_SSRC_JMP_HALT_COND 0x07
+
+#define SEC_HW_ERR_DECO_HFN_THRESHOLD 0xF1
+#define SEC_HW_ERR_CCB_ICV_CHECK_FAIL 0x0A
+
+ /* Macros for extracting error codes for the job ring */
+
+#define JR_REG_JRINT_ERR_TYPE_EXTRACT(value) \
+ ((value) & 0x00000F00)
+
+#define JR_REG_JRINT_ERR_ORWI_EXTRACT(value) \
+ (((value) & 0x3FFF0000) >> \
+ JR_REG_JRINT_ERR_ORWI_SHIFT)
+
+#define JR_REG_JRINT_JRE_EXTRACT(value) \
+ ((value) & JRINT_JRE)
+
+ /* Macros for manipulating JR registers */
+typedef union {
+ uint64_t m_whole;
+ struct {
+#ifdef NXP_SEC_BE
+ uint32_t high;
+ uint32_t low;
+#else
+ uint32_t low;
+ uint32_t high;
+#endif
+ } m_halves;
+} ptr_addr_t;
+
+#if defined(CONFIG_PHYS_64BIT)
+#define sec_read_addr(a) sec_in64((a))
+#define sec_write_addr(a, v) sec_out64((a), (v))
+#else
+#define sec_read_addr(a) sec_in32((a))
+#define sec_write_addr(a, v) sec_out32((a), (v))
+#endif
+
+#define JR_REG(name, jr) (CHAN_BASE(jr) + JR_REG_##name##_OFFSET)
+#define JR_REG_LO(name, jr) (CHAN_BASE(jr) + JR_REG_##name##_OFFSET_LO)
+
+#define GET_JR_REG(name, jr) (sec_in32(JR_REG(name, (jr))))
+#define GET_JR_REG_LO(name, jr) (sec_in32(JR_REG_LO(name, (jr))))
+
+#define SET_JR_REG(name, jr, val) \
+ (sec_out32(JR_REG(name, (jr)), (val)))
+
+#define SET_JR_REG_LO(name, jr, val) \
+ (sec_out32(JR_REG_LO(name, (jr)), (val)))
+
+ /* STRUCTURES AND OTHER TYPEDEFS */
+ /* Lists the possible states for a job ring. */
+typedef enum sec_job_ring_state_e {
+ SEC_JOB_RING_STATE_STARTED, /* Job ring is initialized */
+ SEC_JOB_RING_STATE_RESET, /* Job ring reset is in progres */
+} sec_job_ring_state_t;
+
+struct sec_job_ring_t {
+ /*
+ * Consumer index for job ring (jobs array).
+ * @note: cidx and pidx are accessed from
+ * different threads.
+ * Place the cidx and pidx inside the structure
+ * so that they lay on different cachelines, to
+ * avoid false sharing between threads when the
+ * threads run on different cores!
+ */
+ uint32_t cidx;
+
+ /* Producer index for job ring (jobs array) */
+ uint32_t pidx;
+
+ /* Ring of input descriptors. Size of array is power of 2 to allow
+ * fast update of producer/consumer indexes with bitwise operations.
+ */
+ phys_addr_t *input_ring;
+
+ /* Ring of output descriptors. */
+ struct sec_outring_entry *output_ring;
+
+ /* The file descriptor used for polling for interrupts notifications */
+ uint32_t irq_fd;
+
+ /* Model used by SEC Driver to receive notifications from SEC.
+ * Can be either of the three:
+ * #SEC_NOTIFICATION_TYPE_IRQ or
+ * #SEC_NOTIFICATION_TYPE_POLL
+ */
+ uint32_t jr_mode;
+ /* Base address for SEC's register memory for this job ring. */
+ void *register_base_addr;
+ /* notifies if coelescing is enabled for the job ring */
+ uint8_t coalescing_en;
+ /* The state of this job ring */
+ sec_job_ring_state_t jr_state;
+};
+
+ /* Forward structure declaration */
+typedef struct sec_job_ring_t sec_job_ring_t;
+
+struct sec_outring_entry {
+ phys_addr_t desc; /* Pointer to completed descriptor */
+ uint32_t status; /* Status for completed descriptor */
+} __packed;
+
+ /* Lists the states possible for the SEC user space driver. */
+typedef enum sec_driver_state_e {
+ SEC_DRIVER_STATE_IDLE, /*< Driver not initialized */
+ SEC_DRIVER_STATE_STARTED, /*< Driver initialized and */
+ SEC_DRIVER_STATE_RELEASE, /*< Driver release is in progress */
+} sec_driver_state_t;
+
+ /* Union describing the possible error codes that */
+ /* can be set in the descriptor status word */
+
+union hw_error_code {
+ uint32_t error;
+ union {
+ struct {
+ uint32_t ssrc:4;
+ uint32_t ssed_val:28;
+ } __packed value;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t res:28;
+ } __packed no_status_src;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t jmp:1;
+ uint32_t res:11;
+ uint32_t desc_idx:8;
+ uint32_t cha_id:4;
+ uint32_t err_id:4;
+ } __packed ccb_status_src;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t jmp:1;
+ uint32_t res:11;
+ uint32_t desc_idx:8;
+ uint32_t offset:8;
+ } __packed jmp_halt_user_src;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t jmp:1;
+ uint32_t res:11;
+ uint32_t desc_idx:8;
+ uint32_t desc_err:8;
+ } __packed deco_src;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t res:17;
+ uint32_t naddr:3;
+ uint32_t desc_err:8;
+ } __packed jr_src;
+ struct {
+ uint32_t ssrc:4;
+ uint32_t jmp:1;
+ uint32_t res:11;
+ uint32_t desc_idx:8;
+ uint32_t cond:8;
+ } __packed jmp_halt_cond_src;
+ } __packed error_desc;
+} __packed;
+
+ /* FUNCTION PROTOTYPES */
+
+/*
+ * @brief Initialize a job ring/channel in SEC device.
+ * Write configuration register/s to properly initialize a job ring.
+ *
+ * @param [in] job_ring The job ring
+ *
+ * @retval 0 for success
+ * @retval other for error
+ */
+int hw_reset_job_ring(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Reset a job ring/channel in SEC device.
+ * Write configuration register/s to reset a job ring.
+ *
+ * @param [in] job_ring The job ring
+ *
+ * @retval 0 for success
+ * @retval -1 in case job ring reset failed
+ */
+int hw_shutdown_job_ring(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Handle a job ring/channel error in SEC device.
+ * Identify the error type and clear error bits if required.
+ *
+ * @param [in] job_ring The job ring
+ * @param [in] sec_error_code error code as first read from SEC engine
+ */
+
+void hw_handle_job_ring_error(sec_job_ring_t *job_ring,
+ uint32_t sec_error_code);
+/*
+ * @brief Handle a job ring error in the device.
+ * Identify the error type and printout a explanatory
+ * messages.
+ *
+ * @param [in] job_ring The job ring
+ *
+ */
+
+int hw_job_ring_error(sec_job_ring_t *job_ring);
+
+/* @brief Set interrupt coalescing parameters on the Job Ring.
+ * @param [in] job_ring The job ring
+ * @param [in] irq_coalesing_timer
+ * Interrupt coalescing timer threshold.
+ * This value determines the maximum
+ * amount of time after processing a descriptor
+ * before raising an interrupt.
+ * @param [in] irq_coalescing_count
+ * Interrupt coalescing count threshold.
+ * This value determines how many descriptors
+ * are completed before raising an interrupt.
+ */
+
+int hw_job_ring_set_coalescing_param(sec_job_ring_t *job_ring,
+ uint16_t irq_coalescing_timer,
+ uint8_t irq_coalescing_count);
+
+/* @brief Enable interrupt coalescing on a job ring
+ * @param [in] job_ring The job ring
+ */
+
+int hw_job_ring_enable_coalescing(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Disable interrupt coalescing on a job ring
+ * @param [in] job_ring The job ring
+ */
+
+int hw_job_ring_disable_coalescing(sec_job_ring_t *job_ring);
+
+/*
+ * @brief Poll the HW for already processed jobs in the JR
+ * and notify the available jobs to UA.
+ *
+ * @param [in] job_ring The job ring to poll.
+ * @param [in] limit The maximum number of jobs to notify.
+ * If set to negative value, all available
+ * jobs are notified.
+ *
+ * @retval >=0 for No of jobs notified to UA.
+ * @retval -1 for error
+ */
+
+int hw_poll_job_ring(struct sec_job_ring_t *job_ring, int32_t limit);
+
+/* @brief Poll the HW for already processed jobs in the JR
+ * and silently discard the available jobs or notify them to UA
+ * with indicated error code.
+
+ * @param [in,out] job_ring The job ring to poll.
+ * @param [in] do_notify Can be #TRUE or #FALSE.
+ * Indicates if descriptors to be discarded
+ * or notified to UA with given error_code.
+ * @param [in] error_code The detailed SEC error code.
+ * @param [out] notified_descs Number of notified descriptors.
+ * Can be NULL if do_notify is #FALSE
+ */
+void hw_flush_job_ring(struct sec_job_ring_t *job_ring,
+ uint32_t do_notify,
+ uint32_t error_code, uint32_t *notified_descs);
+
+/*
+ * @brief Flush job rings of any processed descs.
+ * The processed descs are silently dropped,
+ * WITHOUT being notified to UA.
+ */
+void flush_job_rings(void);
+
+/*
+ * @brief Handle desc that generated error in SEC engine.
+ * Identify the exact type of error and handle the error.
+ * Depending on the error type, the job ring could be reset.
+ * All descs that are submitted for processing on this job ring
+ * are notified to User Application with error status and detailed error code.
+
+ * @param [in] job_ring Job ring
+ * @param [in] sec_error_code Error code read from job ring's Channel
+ * Status Register
+ * @param [out] notified_descs Number of notified descs. Can be NULL if
+ * do_notify is #FALSE
+ * @param [out] do_driver_shutdown If set to #TRUE, then UA is returned code
+ * #SEC_PROCESSING_ERROR
+ * which is indication that UA must call
+ * sec_release() after this.
+ */
+void sec_handle_desc_error(struct sec_job_ring_t *job_ring,
+ uint32_t sec_error_code,
+ uint32_t *notified_descs,
+ uint32_t *do_driver_shutdown);
+
+/*
+ * @brief Release the software and hardware resources tied to a job ring.
+ * @param [in] job_ring The job ring
+ * @retval 0 for success
+ * @retval -1 for error
+ */
+int shutdown_job_ring(struct sec_job_ring_t *job_ring);
+
+/*
+ * @brief Enable irqs on associated job ring.
+ * @param [in] job_ring The job ring
+ * @retval 0 for success
+ * @retval -1 for error
+ */
+int jr_enable_irqs(struct sec_job_ring_t *job_ring);
+
+/*
+ * @brief Disable irqs on associated job ring.
+ * @param [in] job_ring The job ring
+ * @retval 0 for success
+ * @retval -1 for error
+ */
+int jr_disable_irqs(struct sec_job_ring_t *job_ring);
+
+ /*
+ * IRJA - Input Ring Jobs Added Register shows
+ * how many new jobs were added to the Input Ring.
+ */
+static inline void hw_enqueue_desc_on_job_ring(struct jobring_regs *regs,
+ int num)
+{
+ sec_out32(®s->irja, num);
+}
+
+#endif /* _SEC_HW_SPECIFIC_H_ */
diff --git a/drivers/nxp/crypto/caam/include/sec_jr_driver.h b/drivers/nxp/crypto/caam/include/sec_jr_driver.h
new file mode 100644
index 0000000..1381eab
--- /dev/null
+++ b/drivers/nxp/crypto/caam/include/sec_jr_driver.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef _JR_DRIVER_H_
+#define _JR_DRIVER_H_
+
+#include "jr_driver_config.h"
+
+/* The maximum size of a SEC descriptor, in WORDs (32 bits). */
+#define MAX_DESC_SIZE_WORDS 64
+
+#define CAAM_TIMEOUT 200000 /* ms */
+
+/* Return codes for JR user space driver APIs */
+typedef enum sec_return_code_e {
+ SEC_SUCCESS = 0,
+ SEC_INVALID_INPUT_PARAM,
+ SEC_OUT_OF_MEMORY,
+ SEC_DESCRIPTOR_IN_FLIGHT,
+ SEC_LAST_DESCRIPTOR_IN_FLIGHT,
+ SEC_PROCESSING_ERROR,
+ SEC_DESC_PROCESSING_ERROR,
+ SEC_JR_IS_FULL,
+ SEC_DRIVER_RELEASE_IN_PROGRESS,
+ SEC_DRIVER_ALREADY_INITIALIZED,
+ SEC_DRIVER_NOT_INITIALIZED,
+ SEC_JOB_RING_RESET_IN_PROGRESS,
+ SEC_RESET_ENGINE_FAILED,
+ SEC_ENABLE_IRQS_FAILED,
+ SEC_DISABLE_IRQS_FAILED,
+ SEC_RETURN_CODE_MAX_VALUE,
+} sec_return_code_t;
+
+/* STRUCTURES AND OTHER TYPEDEFS */
+
+/*
+ * @brief Function called by JR User Space driver to notify every processed
+ * descriptor.
+ *
+ * Callback provided by the User Application.
+ * Callback is invoked by JR User Space driver for each descriptor processed by
+ * SEC
+ * @param [in] status Status word indicating processing result for
+ * this descriptor.
+ * @param [in] arg Opaque data passed by User Application
+ * It is opaque from JR driver's point of view.
+ * @param [in] job_ring The job ring handle on which the processed
+ * descriptor word was enqueued
+ */
+typedef void (*user_callback) (uint32_t *desc, uint32_t status,
+ void *arg, void *job_ring);
+
+/*
+ * Structure encompassing a job descriptor which is to be processed
+ * by SEC. User should also initialise this structure with the callback
+ * function pointer which will be called by driver after recieving proccessed
+ * descriptor from SEC. User data is also passed in this data structure which
+ * will be sent as an argument to the user callback function.
+ */
+struct job_descriptor {
+ uint32_t desc[MAX_DESC_SIZE_WORDS];
+ void *arg;
+ user_callback callback;
+};
+
+/*
+ * @brief Initialize the JR User Space driver.
+ * This function will handle initialization of sec library
+ * along with registering platform specific callbacks,
+ * as well as local data initialization.
+ * Call once during application startup.
+ * @note Global SEC initialization is done in SEC kernel driver.
+ * @note The hardware IDs of the initialized Job Rings are opaque to the UA.
+ * The exact Job Rings used by this library are decided between SEC user
+ * space driver and SEC kernel driver. A static partitioning of Job Rings is
+ * assumed, configured in DTS(device tree specification) file.
+ * @param [in] platform_cb Registering the platform specific
+ * callbacks with driver
+ * @retval ::0 for successful execution
+ * @retval ::-1 failure
+ */
+int sec_jr_lib_init(void);
+
+/*
+ * @brief Initialize the software and hardware resources tied to a job ring.
+ * @param [in] jr_mode; Model to be used by SEC Driver to receive
+ * notifications from SEC. Can be either
+ * SEC_NOTIFICATION_TYPE_IRQ or
+ * SEC_NOTIFICATION_TYPE_POLL
+ * @param [in] irq_coalescing_timer This value determines the maximum
+ * amount of time after processing a
+ * descriptor before raising an interrupt.
+ * @param [in] irq_coalescing_count This value determines how many
+ * descriptors are completed before
+ * raising an interrupt.
+ * @param [in] reg_base_addr The job ring base address register
+ * @param [in] irq_id The job ring interrupt identification number.
+ * @retval job_ring_handle for successful job ring configuration
+ * @retval NULL on error
+ */
+void *init_job_ring(uint8_t jr_mode,
+ uint16_t irq_coalescing_timer,
+ uint8_t irq_coalescing_count,
+ void *reg_base_addr, uint32_t irq_id);
+
+/*
+ * @brief Release the resources used by the JR User Space driver.
+ * Reset and release SEC's job rings indicated by the User Application at
+ * init_job_ring() and free any memory allocated internally.
+ * Call once during application tear down.
+ * @note In case there are any descriptors in-flight (descriptors received by
+ * JR driver for processing and for which no response was yet provided to UA),
+ * the descriptors are discarded without any notifications to User Application.
+ * @retval ::0 is returned for a successful execution
+ * @retval ::-1 is returned if JR driver release is in progress
+ */
+int sec_release(void);
+
+/*
+ * @brief Submit a descriptor for SEC processing.
+ * This function creates a "job" which is meant to instruct SEC HW
+ * to perform the processing on the input buffer. The "job" is enqueued
+ * in the Job Ring associated. The function will return after the "job"
+ * enqueue is finished. The function will not wait for SEC to
+ * start or/and finish the "job" processing.
+ * After the processing is finished the SEC HW writes the processing result
+ * to the provided output buffer.
+ * The Caller must poll JR driver using jr_dequeue()
+ * to receive notifications of the processing completion
+ * status. The notifications are received by caller by means of callback
+ * (see ::user_callback).
+ * @param [in] job_ring_handle The handle of the job ring on which
+ * descriptor is to be enqueued
+ * @param [in] job_descriptor The job descriptor structure of type
+ * struct job_descriptor. This structure
+ * should be filled with job descriptor along
+ * with callback function to be called after
+ * processing of descriptor and some
+ * opaque data passed to be passed to the
+ * callback function
+ *
+ * @retval ::0 is returned for successful execution
+ * @retval ::-1 is returned if there is some enqueue failure
+ */
+int enq_jr_desc(void *job_ring_handle, struct job_descriptor *jobdescr);
+
+/*
+ * @brief Polls for available descriptors processed by SEC on a specific
+ * Job Ring
+ * This function polls the SEC Job Rings and delivers processed descriptors
+ * Each processed descriptor has a user_callback registered.
+ * This user_callback is invoked for each processed descriptor.
+ * The polling is stopped when "limit" descriptors are notified or when
+ * there are no more descriptors to notify.
+ * @note The dequeue_jr() API cannot be called from within a user_callback
+ * function
+ * @param [in] job_ring_handle The Job Ring handle.
+ * @param [in] limit This value represents the maximum number
+ * of processed descriptors that can be
+ * notified API call on this Job Ring.
+ * Note that fewer descriptors may be notified
+ * if enough processed descriptors are not
+ * available.
+ * If limit has a negative value, then all
+ * ready descriptors will be notified.
+ *
+ * @retval :: >=0 is returned where retval is the total
+ * Number of descriptors notified
+ * during this function call.
+ * @retval :: -1 is returned in case of some error
+ */
+int dequeue_jr(void *job_ring_handle, int32_t limit);
+
+#endif /* _JR_DRIVER_H_ */
diff --git a/drivers/nxp/crypto/caam/src/auth/auth.mk b/drivers/nxp/crypto/caam/src/auth/auth.mk
new file mode 100644
index 0000000..d1f8c75
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/auth/auth.mk
@@ -0,0 +1,12 @@
+#
+# Copyright 2018-2020 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+
+SEC_DRIVERS_PATH := drivers/nxp/crypto/caam
+
+ifeq (${TRUSTED_BOARD_BOOT},1)
+AUTH_SOURCES += $(wildcard $(SEC_DRIVERS_PATH)/src/auth/*.c)
+endif
diff --git a/drivers/nxp/crypto/caam/src/auth/hash.c b/drivers/nxp/crypto/caam/src/auth/hash.c
new file mode 100644
index 0000000..1665df1
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/auth/hash.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include <drivers/auth/crypto_mod.h>
+
+#include "hash.h"
+#include "jobdesc.h"
+#include "sec_hw_specific.h"
+
+/* Since no Allocator is available . Taking a global static ctx.
+ * This would mean that only one active ctx can be there at a time.
+ */
+
+static struct hash_ctx glbl_ctx;
+
+static void hash_done(uint32_t *desc, uint32_t status, void *arg,
+ void *job_ring)
+{
+ INFO("Hash Desc SUCCESS with status %x\n", status);
+}
+
+/***************************************************************************
+ * Function : hash_init
+ * Arguments : ctx - SHA context
+ * Return : init,
+ * Description : This function initializes the context for SHA calculation
+ ***************************************************************************/
+int hash_init(enum hash_algo algo, void **ctx)
+{
+ if (glbl_ctx.active == false) {
+ memset(&glbl_ctx, 0, sizeof(struct hash_ctx));
+ glbl_ctx.active = true;
+ glbl_ctx.algo = algo;
+ *ctx = &glbl_ctx;
+ return 0;
+ } else {
+ return -1;
+ }
+}
+
+/***************************************************************************
+ * Function : hash_update
+ * Arguments : ctx - SHA context
+ * buffer - Data
+ * length - Length
+ * Return : -1 on error
+ * 0 on SUCCESS
+ * Description : This function creates SG entry of the data provided
+ ***************************************************************************/
+int hash_update(enum hash_algo algo, void *context, void *data_ptr,
+ unsigned int data_len)
+{
+ struct hash_ctx *ctx = context;
+ /* MAX_SG would be MAX_SG_ENTRIES + key + hdr + sg table */
+ if (ctx->sg_num >= MAX_SG) {
+ ERROR("Reached limit for calling %s\n", __func__);
+ ctx->active = false;
+ return -EINVAL;
+
+ }
+
+ if (ctx->algo != algo) {
+ ERROR("ctx for algo not correct\n");
+ ctx->active = false;
+ return -EINVAL;
+ }
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)data_ptr, data_len);
+ dmbsy();
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_hi,
+ (uint32_t) ((uintptr_t) data_ptr >> 32));
+#else
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_hi, 0x0);
+#endif
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].addr_lo, (uintptr_t) data_ptr);
+
+ sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag,
+ (data_len & SG_ENTRY_LENGTH_MASK));
+
+ ctx->sg_num++;
+
+ ctx->len += data_len;
+
+ return 0;
+}
+
+/***************************************************************************
+ * Function : hash_final
+ * Arguments : ctx - SHA context
+ * Return : SUCCESS or FAILURE
+ * Description : This function sets the final bit and enqueues the decriptor
+ ***************************************************************************/
+int hash_final(enum hash_algo algo, void *context, void *hash_ptr,
+ unsigned int hash_len)
+{
+ int ret = 0;
+ struct hash_ctx *ctx = context;
+ uint32_t final = 0U;
+
+ struct job_descriptor jobdesc __aligned(CACHE_WRITEBACK_GRANULE);
+
+ jobdesc.arg = NULL;
+ jobdesc.callback = hash_done;
+
+ if (ctx->algo != algo) {
+ ERROR("ctx for algo not correct\n");
+ ctx->active = false;
+ return -EINVAL;
+ }
+
+ final = sec_in32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag) |
+ SG_ENTRY_FINAL_BIT;
+ sec_out32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag, final);
+
+ dsb();
+
+ /* create the hw_rng descriptor */
+ cnstr_hash_jobdesc(jobdesc.desc, (uint8_t *) ctx->sg_tbl,
+ ctx->len, hash_ptr);
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)ctx->sg_tbl,
+ (sizeof(struct sg_entry) * MAX_SG));
+ inv_dcache_range((uintptr_t)hash_ptr, hash_len);
+
+ dmbsy();
+#endif
+
+ /* Finally, generate the requested random data bytes */
+ ret = run_descriptor_jr(&jobdesc);
+ if (ret != 0) {
+ ERROR("Error in running descriptor\n");
+ ret = -1;
+ }
+ ctx->active = false;
+ return ret;
+}
diff --git a/drivers/nxp/crypto/caam/src/auth/nxp_crypto.c b/drivers/nxp/crypto/caam/src/auth/nxp_crypto.c
new file mode 100644
index 0000000..646e981
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/auth/nxp_crypto.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <stddef.h>
+#include <string.h>
+
+#include "caam.h"
+#include <common/debug.h>
+#include <drivers/auth/crypto_mod.h>
+
+#include "hash.h"
+#include "rsa.h"
+
+#define LIB_NAME "NXP crypto"
+
+/*
+ * Initialize the library and export the descriptor
+ */
+static void init(void)
+{
+ /* Initialize NXP crypto library`:*/
+ NOTICE("Initializing & configuring SEC block.\n");
+
+ if (config_sec_block() < 0) {
+ ERROR("Init & config failure for caam.\n");
+ }
+}
+
+/*
+ * Verify a signature.
+ *
+ * For IMG_PLAT - data points to a PKCS#1.5 encoded HASH
+ * sig_alg will be RSA or ECC
+ * Parameters are passed using the DER encoding format following the ASN.1
+ * structures detailed above.
+ */
+static int verify_signature(void *data_ptr, unsigned int data_len,
+ void *sig_ptr, unsigned int sig_len,
+ void *sign_alg, unsigned int sig_alg_len,
+ void *pk_ptr, unsigned int pk_len)
+{
+ int ret = CRYPTO_SUCCESS;
+
+ enum sig_alg alg = *(enum sig_alg *)sign_alg;
+
+ switch (alg) {
+ case RSA:
+ NOTICE("Verifying RSA\n");
+ ret = rsa_verify_signature(data_ptr, data_len, sig_ptr, sig_len,
+ pk_ptr, pk_len);
+ break;
+ case ECC:
+ default:
+ ret = CRYPTO_ERR_SIGNATURE;
+ break;
+ }
+
+ if (ret != 0) {
+ ERROR("RSA verification Failed\n");
+ }
+ return ret;
+
+}
+
+/*
+ * Match a hash
+ *
+ * Digest info is passed as a table of SHA-26 hashes and digest_info_len
+ * is number of entries in the table
+ * This implementation is very specific to the CSF header parser ROTPK
+ * comparison.
+ */
+static int verify_hash(void *data_ptr, unsigned int data_len,
+ void *digest_info_ptr, unsigned int digest_info_len)
+{
+ void *ctx = NULL;
+ int i = 0, ret = 0;
+ enum hash_algo algo = SHA256;
+ uint8_t hash[SHA256_BYTES] __aligned(CACHE_WRITEBACK_GRANULE) = {0};
+ uint32_t digest_size = SHA256_BYTES;
+ uint8_t *hash_tbl = digest_info_ptr;
+
+ NOTICE("Verifying hash\n");
+ ret = hash_init(algo, &ctx);
+ if (ret != 0) {
+ return CRYPTO_ERR_HASH;
+ }
+
+ /* Update hash with that of SRK table */
+ ret = hash_update(algo, ctx, data_ptr, data_len);
+ if (ret != 0) {
+ return CRYPTO_ERR_HASH;
+ }
+
+ /* Copy hash at destination buffer */
+ ret = hash_final(algo, ctx, hash, digest_size);
+ if (ret != 0) {
+ return CRYPTO_ERR_HASH;
+ }
+
+ VERBOSE("%s Calculated hash\n", __func__);
+ for (i = 0; i < SHA256_BYTES/4; i++) {
+ VERBOSE("%x\n", *((uint32_t *)hash + i));
+ }
+
+ for (i = 0; i < digest_info_len; i++) {
+ if (memcmp(hash, (hash_tbl + (i * digest_size)),
+ digest_size) == 0) {
+ return CRYPTO_SUCCESS;
+ }
+ }
+
+ return CRYPTO_ERR_HASH;
+}
+
+/*
+ * Register crypto library descriptor
+ */
+REGISTER_CRYPTO_LIB(LIB_NAME, init, verify_signature, verify_hash, NULL);
diff --git a/drivers/nxp/crypto/caam/src/auth/rsa.c b/drivers/nxp/crypto/caam/src/auth/rsa.c
new file mode 100644
index 0000000..0c44462
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/auth/rsa.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include <drivers/auth/crypto_mod.h>
+
+#include "jobdesc.h"
+#include "rsa.h"
+#include "sec_hw_specific.h"
+
+/* This array contains DER value for SHA-256 */
+static const uint8_t hash_identifier[] = {
+ 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60,
+ 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00,
+ 0x04, 0x20
+};
+
+static void rsa_done(uint32_t *desc, uint32_t status, void *arg,
+ void *job_ring)
+{
+ INFO("RSA Desc SUCCESS with status %x\n", status);
+}
+
+static int rsa_public_verif_sec(uint8_t *sign, uint8_t *to,
+ uint8_t *rsa_pub_key, uint32_t klen)
+{
+ int ret = 0;
+ struct rsa_context ctx __aligned(CACHE_WRITEBACK_GRANULE);
+ struct job_descriptor jobdesc __aligned(CACHE_WRITEBACK_GRANULE);
+
+ jobdesc.arg = NULL;
+ jobdesc.callback = rsa_done;
+
+ memset(&ctx, 0, sizeof(struct rsa_context));
+
+ ctx.pkin.a = sign;
+ ctx.pkin.a_siz = klen;
+ ctx.pkin.n = rsa_pub_key;
+ ctx.pkin.n_siz = klen;
+ ctx.pkin.e = rsa_pub_key + klen;
+ ctx.pkin.e_siz = klen;
+
+ cnstr_jobdesc_pkha_rsaexp(jobdesc.desc, &ctx.pkin, to, klen);
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)sign, klen);
+ flush_dcache_range((uintptr_t)rsa_pub_key, 2 * klen);
+ flush_dcache_range((uintptr_t)&ctx.pkin, sizeof(ctx.pkin));
+ inv_dcache_range((uintptr_t)to, klen);
+
+ dmbsy();
+ dsbsy();
+ isb();
+#endif
+
+ /* Finally, generate the requested random data bytes */
+ ret = run_descriptor_jr(&jobdesc);
+ if (ret != 0) {
+ ERROR("Error in running descriptor\n");
+ ret = -1;
+ }
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ inv_dcache_range((uintptr_t)to, klen);
+ dmbsy();
+ dsbsy();
+ isb();
+#endif
+ return ret;
+}
+
+/*
+ * Construct encoded hash EM' wrt PKCSv1.5. This function calculates the
+ * pointers for padding, DER value and hash. And finally, constructs EM'
+ * which includes hash of complete CSF header and ESBC image. If SG flag
+ * is on, hash of SG table and entries is also included.
+ */
+static int construct_img_encoded_hash_second(uint8_t *hash, uint8_t hash_len,
+ uint8_t *encoded_hash_second,
+ unsigned int key_len)
+{
+ /*
+ * RSA PKCSv1.5 encoding format for encoded message is below
+ * EM = 0x0 || 0x1 || PS || 0x0 || DER || Hash
+ * PS is Padding String
+ * DER is DER value for SHA-256
+ * Hash is SHA-256 hash
+ * *********************************************************
+ * representative points to first byte of EM initially and is
+ * filled with 0x0
+ * representative is incremented by 1 and second byte is filled
+ * with 0x1
+ * padding points to third byte of EM
+ * digest points to full length of EM - 32 bytes
+ * hash_id (DER value) points to 19 bytes before pDigest
+ * separator is one byte which separates padding and DER
+ */
+
+ unsigned int len;
+ uint8_t *representative;
+ uint8_t *padding, *digest;
+ uint8_t *hash_id, *separator;
+ int i;
+ int ret = 0;
+
+ if (hash_len != SHA256_BYTES) {
+ return -1;
+ }
+
+ /* Key length = Modulus length */
+ len = (key_len / 2U) - 1U;
+ representative = encoded_hash_second;
+ representative[0] = 0U;
+ representative[1] = 1U; /* block type 1 */
+
+ padding = &representative[2];
+ digest = &representative[1] + len - 32;
+ hash_id = digest - sizeof(hash_identifier);
+ separator = hash_id - 1;
+
+ /* fill padding area pointed by padding with 0xff */
+ memset(padding, 0xff, separator - padding);
+
+ /* fill byte pointed by separator */
+ *separator = 0U;
+
+ /* fill SHA-256 DER value pointed by HashId */
+ memcpy(hash_id, hash_identifier, sizeof(hash_identifier));
+
+ /* fill hash pointed by Digest */
+ for (i = 0; i < SHA256_BYTES; i++) {
+ digest[i] = hash[i];
+ }
+
+ return ret;
+}
+
+int rsa_verify_signature(void *hash_ptr, unsigned int hash_len,
+ void *sig_ptr, unsigned int sig_len,
+ void *pk_ptr, unsigned int pk_len)
+{
+ uint8_t img_encoded_hash_second[RSA_4K_KEY_SZ_BYTES];
+ uint8_t encoded_hash[RSA_4K_KEY_SZ_BYTES] __aligned(CACHE_WRITEBACK_GRANULE);
+ int ret = 0;
+
+ ret = construct_img_encoded_hash_second(hash_ptr, hash_len,
+ img_encoded_hash_second,
+ pk_len);
+ if (ret != 0) {
+ ERROR("Encoded Hash Failure\n");
+ return CRYPTO_ERR_SIGNATURE;
+ }
+
+ ret = rsa_public_verif_sec(sig_ptr, encoded_hash, pk_ptr, pk_len / 2);
+ if (ret != 0) {
+ ERROR("RSA signature Failure\n");
+ return CRYPTO_ERR_SIGNATURE;
+ }
+
+ ret = memcmp(img_encoded_hash_second, encoded_hash, sig_len);
+ if (ret != 0) {
+ ERROR("Comparison Failure\n");
+ return CRYPTO_ERR_SIGNATURE;
+ }
+
+ return CRYPTO_SUCCESS;
+}
diff --git a/drivers/nxp/crypto/caam/src/caam.c b/drivers/nxp/crypto/caam/src/caam.c
new file mode 100644
index 0000000..e594f7b
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/caam.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "sec_hw_specific.h"
+
+static uintptr_t g_nxp_caam_addr;
+static void *job_ring;
+
+uintptr_t get_caam_addr(void)
+{
+ if (g_nxp_caam_addr == 0) {
+ ERROR("Sec Init is not done.\n");
+ panic();
+ }
+ return g_nxp_caam_addr;
+}
+
+/* This function sets the TZ bit for the Job ring number passed as @num */
+static void config_tz(int num)
+{
+ uint32_t jricid;
+
+ /* Setting TZ bit of job ring */
+ switch (num) {
+ case 0:
+ jricid = sec_in32(g_nxp_caam_addr + SEC_REG_JR0ICIDR_MS_OFFSET);
+ sec_out32(g_nxp_caam_addr + SEC_REG_JR0ICIDR_MS_OFFSET,
+ jricid | JRICID_MS_TZ);
+ break;
+ case 1:
+ jricid = sec_in32(g_nxp_caam_addr + SEC_REG_JR1ICIDR_MS_OFFSET);
+ sec_out32(g_nxp_caam_addr + SEC_REG_JR1ICIDR_MS_OFFSET,
+ jricid | JRICID_MS_TZ);
+ break;
+ case 2:
+ jricid = sec_in32(g_nxp_caam_addr + SEC_REG_JR2ICIDR_MS_OFFSET);
+ sec_out32(g_nxp_caam_addr + SEC_REG_JR2ICIDR_MS_OFFSET,
+ jricid | JRICID_MS_TZ);
+ break;
+ case 3:
+ jricid = sec_in32(g_nxp_caam_addr + SEC_REG_JR3ICIDR_MS_OFFSET);
+ sec_out32(g_nxp_caam_addr + SEC_REG_JR3ICIDR_MS_OFFSET,
+ jricid | JRICID_MS_TZ);
+ break;
+ default:
+ break;
+ }
+}
+
+/* This function checks if Virtualization is enabled for JR and
+ * accordingly sets the bot for starting JR<num> in JRSTARTR register
+ */
+static inline void start_jr(int num)
+{
+ uint32_t ctpr = sec_in32((g_nxp_caam_addr + SEC_REG_CTPR_MS_OFFSET));
+ uint32_t tmp = sec_in32((g_nxp_caam_addr + SEC_REG_JRSTARTR_OFFSET));
+ uint32_t scfgr = sec_in32((g_nxp_caam_addr + SEC_REG_SCFGR_OFFSET));
+ bool start = false;
+
+ if ((ctpr & CTPR_VIRT_EN_INC) != 0U) {
+ if (((ctpr & CTPR_VIRT_EN_POR) != 0U) ||
+ ((scfgr & SCFGR_VIRT_EN) != 0U)) {
+ start = true;
+ }
+ } else {
+ if ((ctpr & CTPR_VIRT_EN_POR) != 0U) {
+ start = true;
+ }
+ }
+
+ if (start == true) {
+ switch (num) {
+ case 0:
+ tmp |= JRSTARTR_STARTJR0;
+ break;
+ case 1:
+ tmp |= JRSTARTR_STARTJR1;
+ break;
+ case 2:
+ tmp |= JRSTARTR_STARTJR2;
+ break;
+ case 3:
+ tmp |= JRSTARTR_STARTJR3;
+ break;
+ default:
+ break;
+ }
+ }
+ sec_out32((g_nxp_caam_addr + SEC_REG_JRSTARTR_OFFSET), tmp);
+}
+
+/* This functions configures the Job Ring
+ * JR3 is reserved for use by Secure world
+ */
+static int configure_jr(int num)
+{
+ int ret;
+ void *reg_base_addr;
+
+ switch (num) {
+ case 0:
+ reg_base_addr = (void *)(g_nxp_caam_addr + CAAM_JR0_OFFSET);
+ break;
+ case 1:
+ reg_base_addr = (void *)(g_nxp_caam_addr + CAAM_JR1_OFFSET);
+ break;
+ case 2:
+ reg_base_addr = (void *)(g_nxp_caam_addr + CAAM_JR2_OFFSET);
+ break;
+ case 3:
+ reg_base_addr = (void *)(g_nxp_caam_addr + CAAM_JR3_OFFSET);
+ break;
+ default:
+ break;
+ }
+
+ /* Initialize the JR library */
+ ret = sec_jr_lib_init();
+ if (ret != 0) {
+ ERROR("Error in sec_jr_lib_init");
+ return -1;
+ }
+
+ start_jr(num);
+
+ /* Do HW configuration of the JR */
+ job_ring = init_job_ring(SEC_NOTIFICATION_TYPE_POLL, 0, 0,
+ reg_base_addr, 0);
+
+ if (job_ring == NULL) {
+ ERROR("Error in init_job_ring");
+ return -1;
+ }
+
+ return ret;
+}
+
+/* TBD - Configures and locks the ICID values for various JR */
+static inline void configure_icid(void)
+{
+}
+
+/* TBD configures the TZ settings of RTIC */
+static inline void configure_rtic(void)
+{
+}
+
+int sec_init(uintptr_t nxp_caam_addr)
+{
+ g_nxp_caam_addr = nxp_caam_addr;
+ return config_sec_block();
+}
+
+/* This function configure SEC block:
+ * - It does basic parameter setting
+ * - Configures the default Job ring assigned to TZ /secure world
+ * - Instantiates the RNG
+ */
+int config_sec_block(void)
+{
+ int ret = 0;
+ uint32_t mcfgr;
+
+ if (g_nxp_caam_addr == 0) {
+ ERROR("Sec Init is not done.\n");
+ return -1;
+ } else if (job_ring != NULL) {
+ NOTICE("Sec is already initialized and configured.\n");
+ return ret;
+ }
+
+ mcfgr = sec_in32(g_nxp_caam_addr + SEC_REG_MCFGR_OFFSET);
+
+ /* Modify CAAM Read/Write attributes
+ * AXI Write - Cacheable, WB and WA
+ * AXI Read - Cacheable, RA
+ */
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS2088A)
+ mcfgr = (mcfgr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT);
+ mcfgr = (mcfgr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT);
+#else
+ mcfgr = (mcfgr & ~MCFGR_AWCACHE_MASK) | (0x2 << MCFGR_AWCACHE_SHIFT);
+#endif
+
+ /* Set PS bit to 1 */
+#ifdef CONFIG_PHYS_64BIT
+ mcfgr |= (1 << MCFGR_PS_SHIFT);
+#endif
+ sec_out32(g_nxp_caam_addr + SEC_REG_MCFGR_OFFSET, mcfgr);
+
+ /* Asssign ICID to all Job rings and lock them for usage */
+ configure_icid();
+
+ /* Configure the RTIC */
+ configure_rtic();
+
+ /* Configure the default JR for usage */
+ ret = configure_jr(DEFAULT_JR);
+ if (ret != 0) {
+ ERROR("\nFSL_JR: configuration failure\n");
+ return -1;
+ }
+ /* Do TZ configuration of default JR for sec firmware */
+ config_tz(DEFAULT_JR);
+
+#ifdef CONFIG_RNG_INIT
+ /* Instantiate the RNG */
+ ret = hw_rng_instantiate();
+ if (ret != 0) {
+ ERROR("\nRNG Instantiation failure\n");
+ return -1;
+ }
+#endif
+
+ return ret;
+}
+
+/* This function is used for sumbitting job to the Job Ring
+ * [param] [in] - jobdesc to be submitted
+ * Return - -1 in case of error and 0 in case of SUCCESS
+ */
+int run_descriptor_jr(struct job_descriptor *jobdesc)
+{
+ int i = 0, ret = 0;
+ uint32_t *desc_addr = jobdesc->desc;
+ uint32_t desc_len = desc_length(jobdesc->desc);
+ uint32_t desc_word;
+
+ for (i = 0; i < desc_len; i++) {
+ desc_word = desc_addr[i];
+ VERBOSE("%x\n", desc_word);
+ sec_out32((uint32_t *)&desc_addr[i], desc_word);
+ }
+ dsb();
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)desc_addr, desc_len * 4);
+ dmbsy();
+ dsbsy();
+ isb();
+#endif
+
+ ret = enq_jr_desc(job_ring, jobdesc);
+ if (ret == 0) {
+ VERBOSE("JR enqueue done...\n");
+ } else {
+ ERROR("Error in Enqueue\n");
+ return ret;
+ }
+
+ VERBOSE("Dequeue in progress");
+
+ ret = dequeue_jr(job_ring, -1);
+ if (ret >= 0) {
+ VERBOSE("Dequeue of %x desc success\n", ret);
+ ret = 0;
+ } else {
+ ERROR("deq_ret %x\n", ret);
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/* this function returns a random number using HW RNG Algo
+ * In case of failure, random number returned is 0
+ * prngWidth = 0 - 32 bit random number
+ * prngWidth > 0 means 64 bit random number
+ */
+unsigned long long get_random(int rngWidth)
+{
+ unsigned long long result = 0;
+ uint8_t rand_byte[64] __aligned(CACHE_WRITEBACK_GRANULE);
+ uint8_t rand_byte_swp[8];
+ int bytes = 0;
+ int i = 0;
+ int ret = 0;
+
+#ifdef CAAM_TEST
+ rand_byte[0] = U(0x12);
+ rand_byte[1] = U(0x34);
+ rand_byte[2] = U(0x56);
+ rand_byte[3] = U(0x78);
+ rand_byte[4] = U(0x9a);
+ rand_byte[5] = U(0xbc);
+ rand_byte[6] = U(0xde);
+ rand_byte[7] = U(0xf1);
+#endif
+
+ if (rngWidth == 0U) {
+ bytes = 4;
+ } else {
+ bytes = 8;
+ }
+
+ memset(rand_byte, 0, 64);
+
+ ret = get_rand_bytes_hw(rand_byte, bytes);
+
+ for (i = 0; i < bytes; i++) {
+ if (ret != 0) {
+ /* Return 0 in case of failure */
+ rand_byte_swp[i] = 0;
+ } else {
+ rand_byte_swp[i] = rand_byte[bytes - i - 1];
+ result = (result << 8) | rand_byte_swp[i];
+ }
+ }
+
+ INFO("result %llx\n", result);
+
+ return result;
+
+} /* _get_RNG() */
+
+unsigned int _get_hw_unq_key(uint64_t hw_key_phy_addr, unsigned int size)
+{
+ int ret = 0;
+ uint8_t *hw_key = (uint8_t *) ptov((phys_addr_t *) hw_key_phy_addr);
+
+ ret = get_hw_unq_key_blob_hw(hw_key, size);
+
+ return ret;
+}
diff --git a/drivers/nxp/crypto/caam/src/hw_key_blob.c b/drivers/nxp/crypto/caam/src/hw_key_blob.c
new file mode 100644
index 0000000..0720695
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/hw_key_blob.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "sec_hw_specific.h"
+
+
+/* Callback function after Instantiation decsriptor is submitted to SEC
+ */
+static void blob_done(uint32_t *desc, uint32_t status, void *arg,
+ void *job_ring)
+{
+ INFO("Blob Desc SUCCESS with status %x\n", status);
+}
+
+/* @brief Submit descriptor to create blob
+ * @retval 0 on success
+ * @retval -1 on error
+ */
+int get_hw_unq_key_blob_hw(uint8_t *hw_key, int size)
+{
+ int ret = 0;
+ int i = 0;
+
+ uint32_t key_sz = KEY_IDNFR_SZ_BYTES;
+ uint8_t key_data[KEY_IDNFR_SZ_BYTES];
+ uint8_t in_data[16];
+ uint8_t out_data[16 + KEY_BLOB_SIZE + MAC_SIZE];
+ struct job_descriptor desc __aligned(CACHE_WRITEBACK_GRANULE);
+ struct job_descriptor *jobdesc = &desc;
+ uint32_t in_sz = 16U;
+
+ /* Output blob will have 32 bytes key blob in beginning and
+ * 16 byte HMAC identifier at end of data blob
+ */
+ uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
+
+ uint32_t operation = CMD_OPERATION | OP_TYPE_ENCAP_PROTOCOL |
+ OP_PCLID_BLOB | BLOB_PROTO_INFO;
+
+ memset(key_data, 0xff, KEY_IDNFR_SZ_BYTES);
+ memset(in_data, 0x00, in_sz);
+ memset(out_data, 0x00, in_sz);
+
+ jobdesc->arg = NULL;
+ jobdesc->callback = blob_done;
+
+ INFO("\nGenerating Master Key Verification Blob.\n");
+
+ /* Create the hw_rng descriptor */
+ ret = cnstr_hw_encap_blob_jobdesc(jobdesc->desc, key_data, key_sz,
+ CLASS_2, in_data, in_sz, out_data,
+ out_sz, operation);
+
+ /* Finally, generate the blob. */
+ ret = run_descriptor_jr(jobdesc);
+ if (ret != 0) {
+ ERROR("Error in running hw unq key blob descriptor\n");
+ return -1;
+ }
+ /* Copying alternate bytes of the Master Key Verification Blob.
+ */
+ for (i = 0; i < size; i++) {
+ hw_key[i] = out_data[2 * i];
+ }
+
+ return ret;
+}
diff --git a/drivers/nxp/crypto/caam/src/jobdesc.c b/drivers/nxp/crypto/caam/src/jobdesc.c
new file mode 100644
index 0000000..9c235af
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/jobdesc.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2017-2020 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "rsa.h"
+#include "sec_hw_specific.h"
+
+
+/* Return Length of desctiptr from first word */
+uint32_t desc_length(uint32_t *desc)
+{
+ return desc[0] & DESC_LEN_MASK;
+}
+
+/*Update start index in first word of descriptor */
+void desc_update_start_index(uint32_t *desc, uint32_t index)
+{
+ desc[0] |= (index << DESC_START_SHIFT);
+}
+
+/* Initialize the descriptor */
+void desc_init(uint32_t *desc)
+{
+ *desc = 0;
+}
+
+/* Add word in the descriptor and increment the length */
+void desc_add_word(uint32_t *desc, uint32_t word)
+{
+ uint32_t len = desc_length(desc);
+
+ /* Add Word at Last */
+ uint32_t *last = desc + len;
+ *last = word;
+
+ /* Increase the length */
+ desc[0] += 1;
+}
+
+/* Add Pointer to the descriptor */
+void desc_add_ptr(uint32_t *desc, phys_addr_t *ptr)
+{
+ uint32_t len = desc_length(desc);
+
+ /* Add Word at Last */
+ phys_addr_t *last = (phys_addr_t *) (desc + len);
+
+#ifdef CONFIG_PHYS_64BIT
+ ptr_addr_t *ptr_addr = (ptr_addr_t *) last;
+
+ ptr_addr->m_halves.high = PHYS_ADDR_HI(ptr);
+ ptr_addr->m_halves.low = PHYS_ADDR_LO(ptr);
+#else
+ *last = ptr;
+#endif
+
+ /* Increase the length */
+ desc[0] += (uint32_t) (sizeof(phys_addr_t) / sizeof(uint32_t));
+}
+
+/* Descriptor to generate Random words */
+int cnstr_rng_jobdesc(uint32_t *desc, uint32_t state_handle,
+ uint32_t *add_inp, uint32_t add_ip_len,
+ uint8_t *out_data, uint32_t len)
+{
+ phys_addr_t *phys_addr_out = vtop(out_data);
+
+ /* Current descriptor support only 64K length */
+ if (len > U(0xffff))
+ return -1;
+ /* Additional Input not supported by current descriptor */
+ if (add_ip_len > 0U)
+ return -1;
+
+ VERBOSE("Constructing descriptor\n");
+ desc_init(desc);
+ /* Class1 Alg Operation,RNG Optype, Generate */
+ desc_add_word(desc, U(0xb0800000));
+ desc_add_word(desc, U(0x82500000) | (state_handle << ALG_AAI_SH_SHIFT));
+ desc_add_word(desc, U(0x60340000) | len);
+ desc_add_ptr(desc, phys_addr_out);
+
+ return 0;
+
+}
+
+/* Construct descriptor to instantiate RNG */
+int cnstr_rng_instantiate_jobdesc(uint32_t *desc)
+{
+ desc_init(desc);
+ desc_add_word(desc, U(0xb0800000));
+ /* Class1 Alg Operation,RNG Optype, Instantiate */
+ desc_add_word(desc, U(0x82500004));
+ /* Wait for done */
+ desc_add_word(desc, U(0xa2000001));
+ /*Load to clear written */
+ desc_add_word(desc, U(0x10880004));
+ /*Pri Mode Reg clear */
+ desc_add_word(desc, U(0x00000001));
+ /* Generate secure keys */
+ desc_add_word(desc, U(0x82501000));
+
+ return 0;
+}
+
+/* Construct descriptor to generate hw key blob */
+int cnstr_hw_encap_blob_jobdesc(uint32_t *desc,
+ uint8_t *key_idnfr, uint32_t key_sz,
+ uint32_t key_class, uint8_t *plain_txt,
+ uint32_t in_sz, uint8_t *enc_blob,
+ uint32_t out_sz, uint32_t operation)
+{
+ phys_addr_t *phys_key_idnfr, *phys_addr_in, *phys_addr_out;
+ int i = 0;
+
+ phys_key_idnfr = vtop((void *)key_idnfr);
+ phys_addr_in = vtop((void *)plain_txt);
+ phys_addr_out = vtop((void *)enc_blob);
+
+ desc_init(desc);
+
+ desc_add_word(desc, U(0xb0800000));
+
+ /* Key Identifier */
+ desc_add_word(desc, (key_class | key_sz));
+ desc_add_ptr(desc, phys_key_idnfr);
+
+ /* Source Address */
+ desc_add_word(desc, U(0xf0400000));
+ desc_add_ptr(desc, phys_addr_in);
+
+ /* In Size = 0x10 */
+ desc_add_word(desc, in_sz);
+
+ /* Out Address */
+ desc_add_word(desc, U(0xf8400000));
+ desc_add_ptr(desc, phys_addr_out);
+
+ /* Out Size = 0x10 */
+ desc_add_word(desc, out_sz);
+
+ /* Operation */
+ desc_add_word(desc, operation);
+
+ for (i = 0; i < 15; i++)
+ VERBOSE("desc word %x\n", desc[i]);
+
+ return 0;
+}
+
+/***************************************************************************
+ * Function : inline_cnstr_jobdesc_pkha_rsaexp
+ * Arguments : desc - Pointer to Descriptor
+ * pkin - Pointer to Input Params
+ * out - Pointer to Output
+ * out_siz - Output Size
+ * Return : Void
+ * Description : Creates the descriptor for PKHA RSA
+ ***************************************************************************/
+void cnstr_jobdesc_pkha_rsaexp(uint32_t *desc,
+ struct pk_in_params *pkin, uint8_t *out,
+ uint32_t out_siz)
+{
+ phys_addr_t *ptr_addr_e, *ptr_addr_a, *ptr_addr_n, *ptr_addr_out;
+
+ ptr_addr_e = vtop((void *)(pkin->e));
+ ptr_addr_a = vtop((void *)(pkin->a));
+ ptr_addr_n = vtop((void *)(pkin->n));
+ ptr_addr_out = vtop((void *)(out));
+
+ desc_init(desc);
+ desc_add_word(desc, U(0xb0800000));
+ desc_add_word(desc, U(0x02010000) | pkin->e_siz);
+ desc_add_ptr(desc, ptr_addr_e);
+ desc_add_word(desc, U(0x220c0000) | pkin->a_siz);
+ desc_add_ptr(desc, ptr_addr_a);
+ desc_add_word(desc, U(0x22080000) | pkin->n_siz);
+ desc_add_ptr(desc, ptr_addr_n);
+ desc_add_word(desc, U(0x81800006));
+ desc_add_word(desc, U(0x620d0000) | out_siz);
+ desc_add_ptr(desc, ptr_addr_out);
+}
+
+/***************************************************************************
+ * Function : inline_cnstr_jobdesc_sha256
+ * Arguments : desc - Pointer to Descriptor
+ * msg - Pointer to SG Table
+ * msgsz - Size of SG Table
+ * digest - Pointer to Output Digest
+ * Return : Void
+ * Description : Creates the descriptor for SHA256 HASH calculation
+ ***************************************************************************/
+void cnstr_hash_jobdesc(uint32_t *desc, uint8_t *msg, uint32_t msgsz,
+ uint8_t *digest)
+{
+ /* SHA 256 , output is of length 32 words */
+ phys_addr_t *ptr_addr_in, *ptr_addr_out;
+
+ ptr_addr_in = (void *)vtop(msg);
+ ptr_addr_out = (void *)vtop(digest);
+
+ desc_init(desc);
+ desc_add_word(desc, U(0xb0800000));
+
+ /* Operation Command
+ * OP_TYPE_CLASS2_ALG | OP_ALG_ALGSEL_SHA256 | OP_ALG_AAI_HASH |
+ * OP_ALG_AS_INITFINAL | OP_ALG_ENCRYPT | OP_ALG_ICV_OFF)
+ */
+ desc_add_word(desc, U(0x8443000d));
+
+ if (msgsz > U(0xffff)) {
+ desc_add_word(desc, U(0x25540000)); /* FIFO Load */
+ desc_add_ptr(desc, ptr_addr_in); /* Pointer to msg */
+ desc_add_word(desc, msgsz); /* Size */
+ desc_add_word(desc, U(0x54200020)); /* FIFO Store */
+ desc_add_ptr(desc, ptr_addr_out); /* Pointer to Result */
+ } else {
+ desc_add_word(desc, U(0x25140000) | msgsz);
+ desc_add_ptr(desc, ptr_addr_in);
+ desc_add_word(desc, U(0x54200020));
+ desc_add_ptr(desc, ptr_addr_out);
+ }
+
+}
diff --git a/drivers/nxp/crypto/caam/src/rng.c b/drivers/nxp/crypto/caam/src/rng.c
new file mode 100644
index 0000000..0b9d87d
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/rng.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "sec_hw_specific.h"
+
+
+/* Callback function after Instantiation decsriptor is submitted to SEC */
+static void rng_done(uint32_t *desc, uint32_t status, void *arg,
+ void *job_ring)
+{
+ INFO("RNG Desc SUCCESS with status %x\n", status);
+}
+
+/* Is the HW RNG instantiated?
+ * Return code:
+ * 0 - Not in the instantiated state
+ * 1 - In the instantiated state
+ * state_handle - 0 for SH0, 1 for SH1
+ */
+static int is_hw_rng_instantiated(uint32_t *state_handle)
+{
+ int ret_code = 0;
+ uint32_t rdsta;
+
+ rdsta = sec_in32(get_caam_addr() + RNG_REG_RDSTA_OFFSET);
+
+ /*Check if either of the two state handles has been instantiated */
+ if (rdsta & RNG_STATE0_HANDLE_INSTANTIATED) {
+ *state_handle = 0;
+ ret_code = 1;
+ } else if (rdsta & RNG_STATE0_HANDLE_INSTANTIATED) {
+ *state_handle = 1;
+ ret_code = 1;
+ }
+
+ return ret_code;
+}
+
+/* @brief Kick the TRNG block of the RNG HW Engine
+ * @param [in] ent_delay Entropy delay to be used
+ * By default, the TRNG runs for 200 clocks per sample;
+ * 1200 clocks per sample generates better entropy.
+ * @retval 0 on success
+ * @retval -1 on error
+ */
+static void kick_trng(int ent_delay)
+{
+ uint32_t val;
+
+ /* put RNG4 into program mode */
+ val = sec_in32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET);
+ val = val | RTMCTL_PRGM;
+ sec_out32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET, val);
+
+ /* rtsdctl bits 0-15 contain "Entropy Delay, which defines the
+ * length (in system clocks) of each Entropy sample taken
+ */
+ val = sec_in32(get_caam_addr() + RNG_REG_RTSDCTL_OFFSET);
+ val = (val & ~RTSDCTL_ENT_DLY_MASK) |
+ (ent_delay << RTSDCTL_ENT_DLY_SHIFT);
+ sec_out32(get_caam_addr() + RNG_REG_RTSDCTL_OFFSET, val);
+ /* min. freq. count, equal to 1/4 of the entropy sample length */
+ sec_out32(get_caam_addr() + RNG_REG_RTFRQMIN_OFFSET, ent_delay >> 2);
+ /* disable maximum frequency count */
+ sec_out32(get_caam_addr() + RNG_REG_RTFRQMAX_OFFSET, RTFRQMAX_DISABLE);
+
+ /* select raw sampling in both entropy shifter
+ * and statistical checker
+ */
+ val = sec_in32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET);
+ val = val | RTMCTL_SAMP_MODE_RAW_ES_SC;
+ sec_out32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET, val);
+
+ /* put RNG4 into run mode */
+ val = sec_in32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET);
+ val = val & ~RTMCTL_PRGM;
+ sec_out32(get_caam_addr() + RNG_REG_RTMCTL_OFFSET, val);
+}
+
+/* @brief Submit descriptor to instantiate the RNG
+ * @retval 0 on success
+ * @retval -1 on error
+ */
+static int instantiate_rng(void)
+{
+ int ret = 0;
+ struct job_descriptor desc __aligned(CACHE_WRITEBACK_GRANULE);
+ struct job_descriptor *jobdesc = &desc;
+
+ jobdesc->arg = NULL;
+ jobdesc->callback = rng_done;
+
+ /* create the hw_rng descriptor */
+ cnstr_rng_instantiate_jobdesc(jobdesc->desc);
+
+ /* Finally, generate the requested random data bytes */
+ ret = run_descriptor_jr(jobdesc);
+ if (ret != 0) {
+ ERROR("Error in running descriptor\n");
+ ret = -1;
+ }
+ return ret;
+}
+
+/* Generate Random Data using HW RNG
+ * Parameters:
+ * uint8_t* add_input - user specified optional input byte array
+ * uint32_t add_input_len - number of bytes of additional input
+ * uint8_t* out - user specified output byte array
+ * uint32_t out_len - number of bytes to store in output byte array
+ * Return code:
+ * 0 - SUCCESS
+ * -1 - ERROR
+ */
+static int
+hw_rng_generate(uint32_t *add_input, uint32_t add_input_len,
+ uint8_t *out, uint32_t out_len, uint32_t state_handle)
+{
+ int ret = 0;
+ struct job_descriptor desc __aligned(CACHE_WRITEBACK_GRANULE);
+ struct job_descriptor *jobdesc = &desc;
+
+ jobdesc->arg = NULL;
+ jobdesc->callback = rng_done;
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ inv_dcache_range((uintptr_t)out, out_len);
+ dmbsy();
+#endif
+
+ /* create the hw_rng descriptor */
+ ret = cnstr_rng_jobdesc(jobdesc->desc, state_handle,
+ add_input, add_input_len, out, out_len);
+ if (ret != 0) {
+ ERROR("Descriptor construction failed\n");
+ ret = -1;
+ goto out;
+ }
+ /* Finally, generate the requested random data bytes */
+ ret = run_descriptor_jr(jobdesc);
+ if (ret != 0) {
+ ERROR("Error in running descriptor\n");
+ ret = -1;
+ }
+
+out:
+ return ret;
+}
+
+/* this function instantiates the rng
+ *
+ * Return code:
+ * 0 - All is well
+ * <0 - Error occurred somewhere
+ */
+int hw_rng_instantiate(void)
+{
+ int ret = 0;
+ int ent_delay = RTSDCTL_ENT_DLY_MIN;
+ uint32_t state_handle;
+
+ ret = is_hw_rng_instantiated(&state_handle);
+ if (ret != 0) {
+ NOTICE("RNG already instantiated\n");
+ return 0;
+ }
+ do {
+ kick_trng(ent_delay);
+ ent_delay += 400;
+ /*if instantiate_rng(...) fails, the loop will rerun
+ *and the kick_trng(...) function will modify the
+ *upper and lower limits of the entropy sampling
+ *interval, leading to a sucessful initialization of
+ */
+ ret = instantiate_rng();
+ } while ((ret == -1) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
+ if (ret != 0) {
+ ERROR("RNG: Failed to instantiate RNG\n");
+ return ret;
+ }
+
+ NOTICE("RNG: INSTANTIATED\n");
+
+ /* Enable RDB bit so that RNG works faster */
+ // sec_setbits32(&sec->scfgr, SEC_SCFGR_RDBENABLE);
+
+ return ret;
+}
+
+/* Generate random bytes, and stuff them into the bytes buffer
+ *
+ * If the HW RNG has not already been instantiated,
+ * it will be instantiated before data is generated.
+ *
+ * Parameters:
+ * uint8_t* bytes - byte buffer large enough to hold the requested random date
+ * int byte_len - number of random bytes to generate
+ *
+ * Return code:
+ * 0 - All is well
+ * ~0 - Error occurred somewhere
+ */
+int get_rand_bytes_hw(uint8_t *bytes, int byte_len)
+{
+ int ret_code = 0;
+ uint32_t state_handle;
+
+ /* If this is the first time this routine is called,
+ * then the hash_drbg will not already be instantiated.
+ * Therefore, before generating data, instantiate the hash_drbg
+ */
+ ret_code = is_hw_rng_instantiated(&state_handle);
+ if (ret_code == 0) {
+ INFO("Instantiating the HW RNG\n");
+
+ /* Instantiate the hw RNG */
+ ret_code = hw_rng_instantiate();
+ if (ret_code != 0) {
+ ERROR("HW RNG Instantiate failed\n");
+ return ret_code;
+ }
+ }
+ /* If HW RNG is still not instantiated, something must have gone wrong,
+ * it must be in the error state, we will not generate any random data
+ */
+ if (is_hw_rng_instantiated(&state_handle) == 0) {
+ ERROR("HW RNG is in an Error state, and cannot be used\n");
+ return -1;
+ }
+ /* Generate a random 256-bit value, as 32 bytes */
+ ret_code = hw_rng_generate(0, 0, bytes, byte_len, state_handle);
+ if (ret_code != 0) {
+ ERROR("HW RNG Generate failed\n");
+ return ret_code;
+ }
+
+ return ret_code;
+}
diff --git a/drivers/nxp/crypto/caam/src/sec_hw_specific.c b/drivers/nxp/crypto/caam/src/sec_hw_specific.c
new file mode 100644
index 0000000..92b7762
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/sec_hw_specific.c
@@ -0,0 +1,635 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "sec_hw_specific.h"
+
+
+/* Job rings used for communication with SEC HW */
+extern struct sec_job_ring_t g_job_rings[MAX_SEC_JOB_RINGS];
+
+/* The current state of SEC user space driver */
+extern volatile sec_driver_state_t g_driver_state;
+
+/* The number of job rings used by SEC user space driver */
+extern int g_job_rings_no;
+
+/* LOCAL FUNCTIONS */
+static inline void hw_set_input_ring_start_addr(struct jobring_regs *regs,
+ phys_addr_t *start_addr)
+{
+#if defined(CONFIG_PHYS_64BIT)
+ sec_out32(®s->irba_h, PHYS_ADDR_HI(start_addr));
+#else
+ sec_out32(®s->irba_h, 0);
+#endif
+ sec_out32(®s->irba_l, PHYS_ADDR_LO(start_addr));
+}
+
+static inline void hw_set_output_ring_start_addr(struct jobring_regs *regs,
+ phys_addr_t *start_addr)
+{
+#if defined(CONFIG_PHYS_64BIT)
+ sec_out32(®s->orba_h, PHYS_ADDR_HI(start_addr));
+#else
+ sec_out32(®s->orba_h, 0);
+#endif
+ sec_out32(®s->orba_l, PHYS_ADDR_LO(start_addr));
+}
+
+/* ORJR - Output Ring Jobs Removed Register shows how many jobs were
+ * removed from the Output Ring for processing by software. This is done after
+ * the software has processed the entries.
+ */
+static inline void hw_remove_entries(sec_job_ring_t *jr, int num)
+{
+ struct jobring_regs *regs =
+ (struct jobring_regs *)jr->register_base_addr;
+
+ sec_out32(®s->orjr, num);
+}
+
+/* IRSA - Input Ring Slots Available register holds the number of entries in
+ * the Job Ring's input ring. Once a job is enqueued, the value returned is
+ * decremented by the hardware by the number of jobs enqueued.
+ */
+static inline int hw_get_available_slots(sec_job_ring_t *jr)
+{
+ struct jobring_regs *regs =
+ (struct jobring_regs *)jr->register_base_addr;
+
+ return sec_in32(®s->irsa);
+}
+
+/* ORSFR - Output Ring Slots Full register holds the number of jobs which were
+ * processed by the SEC and can be retrieved by the software. Once a job has
+ * been processed by software, the user will call hw_remove_one_entry in order
+ * to notify the SEC that the entry was processed
+ */
+static inline int hw_get_no_finished_jobs(sec_job_ring_t *jr)
+{
+ struct jobring_regs *regs =
+ (struct jobring_regs *)jr->register_base_addr;
+
+ return sec_in32(®s->orsf);
+}
+
+/* @brief Process Jump Halt Condition related errors
+ * @param [in] error_code The error code in the descriptor status word
+ */
+static inline void hw_handle_jmp_halt_cond_err(union hw_error_code error_code)
+{
+ ERROR("JMP %x\n", error_code.error_desc.jmp_halt_cond_src.jmp);
+ ERROR("Descriptor Index: %d\n",
+ error_code.error_desc.jmp_halt_cond_src.desc_idx);
+ ERROR(" Condition %x\n", error_code.error_desc.jmp_halt_cond_src.cond);
+}
+
+/* @brief Process DECO related errors
+ * @param [in] error_code The error code in the descriptor status word
+ */
+static inline void hw_handle_deco_err(union hw_error_code error_code)
+{
+ ERROR("JMP %x\n", error_code.error_desc.deco_src.jmp);
+ ERROR("Descriptor Index: 0x%x",
+ error_code.error_desc.deco_src.desc_idx);
+
+ switch (error_code.error_desc.deco_src.desc_err) {
+ case SEC_HW_ERR_DECO_HFN_THRESHOLD:
+ WARN(" Descriptor completed but exceeds the Threshold");
+ break;
+ default:
+ ERROR("Error 0x%04x not implemented",
+ error_code.error_desc.deco_src.desc_err);
+ break;
+ }
+}
+
+/* @brief Process Jump Halt User Status related errors
+ * @param [in] error_code The error code in the descriptor status word
+ */
+static inline void hw_handle_jmp_halt_user_err(union hw_error_code error_code)
+{
+ WARN(" Not implemented");
+}
+
+/* @brief Process CCB related errors
+ * @param [in] error_code The error code in the descriptor status word
+ */
+static inline void hw_handle_ccb_err(union hw_error_code hw_error_code)
+{
+ WARN(" Not implemented");
+}
+
+/* @brief Process Job Ring related errors
+ * @param [in] error_code The error code in the descriptor status word
+ */
+static inline void hw_handle_jr_err(union hw_error_code hw_error_code)
+{
+ WARN(" Not implemented");
+}
+
+/* GLOBAL FUNCTIONS */
+
+int hw_reset_job_ring(sec_job_ring_t *job_ring)
+{
+ int ret = 0;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* First reset the job ring in hw */
+ ret = hw_shutdown_job_ring(job_ring);
+ if (ret != 0) {
+ ERROR("Failed resetting job ring in hardware");
+ return ret;
+ }
+ /* In order to have the HW JR in a workable state
+ *after a reset, I need to re-write the input
+ * queue size, input start address, output queue
+ * size and output start address
+ * Write the JR input queue size to the HW register
+ */
+ sec_out32(®s->irs, SEC_JOB_RING_SIZE);
+
+ /* Write the JR output queue size to the HW register */
+ sec_out32(®s->ors, SEC_JOB_RING_SIZE);
+
+ /* Write the JR input queue start address */
+ hw_set_input_ring_start_addr(regs, vtop(job_ring->input_ring));
+
+ /* Write the JR output queue start address */
+ hw_set_output_ring_start_addr(regs, vtop(job_ring->output_ring));
+
+ return 0;
+}
+
+int hw_shutdown_job_ring(sec_job_ring_t *job_ring)
+{
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+ unsigned int timeout = SEC_TIMEOUT;
+ uint32_t tmp = 0U;
+
+ VERBOSE("Resetting Job ring\n");
+
+ /*
+ * Mask interrupts since we are going to poll
+ * for reset completion status
+ * Also, at POR, interrupts are ENABLED on a JR, thus
+ * this is the point where I can disable them without
+ * changing the code logic too much
+ */
+
+ jr_disable_irqs(job_ring);
+
+ /* initiate flush (required prior to reset) */
+ sec_out32(®s->jrcr, JR_REG_JRCR_VAL_RESET);
+
+ /* dummy read */
+ tmp = sec_in32(®s->jrcr);
+
+ do {
+ tmp = sec_in32(®s->jrint);
+ } while (((tmp & JRINT_ERR_HALT_MASK) ==
+ JRINT_ERR_HALT_INPROGRESS) && ((--timeout) != 0U));
+
+ if ((tmp & JRINT_ERR_HALT_MASK) != JRINT_ERR_HALT_COMPLETE ||
+ timeout == 0U) {
+ ERROR("Failed to flush hw job ring %x\n %u", tmp, timeout);
+ /* unmask interrupts */
+ if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL) {
+ jr_enable_irqs(job_ring);
+ }
+ return -1;
+ }
+ /* Initiate reset */
+ timeout = SEC_TIMEOUT;
+ sec_out32(®s->jrcr, JR_REG_JRCR_VAL_RESET);
+
+ do {
+ tmp = sec_in32(®s->jrcr);
+ } while (((tmp & JR_REG_JRCR_VAL_RESET) != 0U) &&
+ ((--timeout) != 0U));
+
+ if (timeout == 0U) {
+ ERROR("Failed to reset hw job ring\n");
+ /* unmask interrupts */
+ if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL) {
+ jr_enable_irqs(job_ring);
+ }
+ return -1;
+ }
+ /* unmask interrupts */
+ if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL) {
+ jr_enable_irqs(job_ring);
+ }
+ return 0;
+
+}
+
+void hw_handle_job_ring_error(sec_job_ring_t *job_ring, uint32_t error_code)
+{
+ union hw_error_code hw_err_code;
+
+ hw_err_code.error = error_code;
+
+ switch (hw_err_code.error_desc.value.ssrc) {
+ case SEC_HW_ERR_SSRC_NO_SRC:
+ INFO("No Status Source ");
+ break;
+ case SEC_HW_ERR_SSRC_CCB_ERR:
+ INFO("CCB Status Source");
+ hw_handle_ccb_err(hw_err_code);
+ break;
+ case SEC_HW_ERR_SSRC_JMP_HALT_U:
+ INFO("Jump Halt User Status Source");
+ hw_handle_jmp_halt_user_err(hw_err_code);
+ break;
+ case SEC_HW_ERR_SSRC_DECO:
+ INFO("DECO Status Source");
+ hw_handle_deco_err(hw_err_code);
+ break;
+ case SEC_HW_ERR_SSRC_JR:
+ INFO("Job Ring Status Source");
+ hw_handle_jr_err(hw_err_code);
+ break;
+ case SEC_HW_ERR_SSRC_JMP_HALT_COND:
+ INFO("Jump Halt Condition Codes");
+ hw_handle_jmp_halt_cond_err(hw_err_code);
+ break;
+ default:
+ INFO("Unknown SSRC");
+ break;
+ }
+}
+
+int hw_job_ring_error(sec_job_ring_t *job_ring)
+{
+ uint32_t jrint_error_code;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ if (JR_REG_JRINT_JRE_EXTRACT(sec_in32(®s->jrint)) == 0) {
+ return 0;
+ }
+
+ jrint_error_code =
+ JR_REG_JRINT_ERR_TYPE_EXTRACT(sec_in32(®s->jrint));
+ switch (jrint_error_code) {
+ case JRINT_ERR_WRITE_STATUS:
+ ERROR("Error writing status to Output Ring ");
+ break;
+ case JRINT_ERR_BAD_INPUT_BASE:
+ ERROR("Bad Input Ring Base (not on a 4-byte boundary)\n");
+ break;
+ case JRINT_ERR_BAD_OUTPUT_BASE:
+ ERROR("Bad Output Ring Base (not on a 4-byte boundary)\n");
+ break;
+ case JRINT_ERR_WRITE_2_IRBA:
+ ERROR("Invalid write to Input Ring Base Address Register\n");
+ break;
+ case JRINT_ERR_WRITE_2_ORBA:
+ ERROR("Invalid write to Output Ring Base Address Register\n");
+ break;
+ case JRINT_ERR_RES_B4_HALT:
+ ERROR("Job Ring released before Job Ring is halted\n");
+ break;
+ case JRINT_ERR_REM_TOO_MANY:
+ ERROR("Removed too many jobs from job ring\n");
+ break;
+ case JRINT_ERR_ADD_TOO_MANY:
+ ERROR("Added too many jobs on job ring\n");
+ break;
+ default:
+ ERROR("Unknown SEC JR Error :%d\n", jrint_error_code);
+ break;
+ }
+ return jrint_error_code;
+}
+
+int hw_job_ring_set_coalescing_param(sec_job_ring_t *job_ring,
+ uint16_t irq_coalescing_timer,
+ uint8_t irq_coalescing_count)
+{
+ uint32_t reg_val = 0U;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* Set descriptor count coalescing */
+ reg_val |= (irq_coalescing_count << JR_REG_JRCFG_LO_ICDCT_SHIFT);
+
+ /* Set coalescing timer value */
+ reg_val |= (irq_coalescing_timer << JR_REG_JRCFG_LO_ICTT_SHIFT);
+
+ /* Update parameters in HW */
+ sec_out32(®s->jrcfg1, reg_val);
+
+ VERBOSE("Set coalescing params on jr\n");
+
+ return 0;
+}
+
+int hw_job_ring_enable_coalescing(sec_job_ring_t *job_ring)
+{
+ uint32_t reg_val = 0U;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* Get the current value of the register */
+ reg_val = sec_in32(®s->jrcfg1);
+
+ /* Enable coalescing */
+ reg_val |= JR_REG_JRCFG_LO_ICEN_EN;
+
+ /* Write in hw */
+ sec_out32(®s->jrcfg1, reg_val);
+
+ VERBOSE("Enabled coalescing on jr\n");
+
+ return 0;
+}
+
+int hw_job_ring_disable_coalescing(sec_job_ring_t *job_ring)
+{
+ uint32_t reg_val = 0U;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* Get the current value of the register */
+ reg_val = sec_in32(®s->jrcfg1);
+
+ /* Disable coalescing */
+ reg_val &= ~JR_REG_JRCFG_LO_ICEN_EN;
+
+ /* Write in hw */
+ sec_out32(®s->jrcfg1, reg_val);
+
+ VERBOSE("Disabled coalescing on jr");
+
+ return 0;
+
+}
+
+void hw_flush_job_ring(struct sec_job_ring_t *job_ring,
+ uint32_t do_notify,
+ uint32_t error_code, uint32_t *notified_descs)
+{
+ int32_t jobs_no_to_discard = 0;
+ int32_t discarded_descs_no = 0;
+ int32_t number_of_jobs_available = 0;
+
+ VERBOSE("JR pi[%d]i ci[%d]\n", job_ring->pidx, job_ring->cidx);
+ VERBOSE("error code %x\n", error_code);
+ VERBOSE("Notify_desc = %d\n", do_notify);
+
+ number_of_jobs_available = hw_get_no_finished_jobs(job_ring);
+
+ /* Discard all jobs */
+ jobs_no_to_discard = number_of_jobs_available;
+
+ VERBOSE("JR pi[%d]i ci[%d]\n", job_ring->pidx, job_ring->cidx);
+ VERBOSE("Discarding desc = %d\n", jobs_no_to_discard);
+
+ while (jobs_no_to_discard > discarded_descs_no) {
+ discarded_descs_no++;
+ /* Now increment the consumer index for the current job ring,
+ * AFTER saving job in temporary location!
+ * Increment the consumer index for the current job ring
+ */
+
+ job_ring->cidx = SEC_CIRCULAR_COUNTER(job_ring->cidx,
+ SEC_JOB_RING_SIZE);
+
+ hw_remove_entries(job_ring, 1);
+ }
+
+ if (do_notify == true) {
+ if (notified_descs == NULL) {
+ return;
+ }
+ *notified_descs = discarded_descs_no;
+ }
+}
+
+/* return >0 in case of success
+ * -1 in case of error from SEC block
+ * 0 in case job not yet processed by SEC
+ * or Descriptor returned is NULL after dequeue
+ */
+int hw_poll_job_ring(struct sec_job_ring_t *job_ring, int32_t limit)
+{
+ int32_t jobs_no_to_notify = 0;
+ int32_t number_of_jobs_available = 0;
+ int32_t notified_descs_no = 0;
+ uint32_t error_descs_no = 0U;
+ uint32_t sec_error_code = 0U;
+ uint32_t do_driver_shutdown = false;
+ phys_addr_t *fnptr, *arg_addr;
+ user_callback usercall = NULL;
+ uint8_t *current_desc;
+ void *arg;
+ uintptr_t current_desc_addr;
+ phys_addr_t current_desc_loc;
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ inv_dcache_range((uintptr_t)job_ring->register_base_addr, sizeof(struct jobring_regs));
+ dmbsy();
+#endif
+
+ /* check here if any JR error that cannot be written
+ * in the output status word has occurred
+ */
+ sec_error_code = hw_job_ring_error(job_ring);
+ if (unlikely(sec_error_code) != 0) {
+ ERROR("Error here itself %x\n", sec_error_code);
+ return -1;
+ }
+ /* Compute the number of notifications that need to be raised to UA
+ * If limit < 0 -> notify all done jobs
+ * If limit > total number of done jobs -> notify all done jobs
+ * If limit = 0 -> error
+ * If limit > 0 && limit < total number of done jobs -> notify a number
+ * of done jobs equal with limit
+ */
+
+ /*compute the number of jobs available in the job ring based on the
+ * producer and consumer index values.
+ */
+
+ number_of_jobs_available = hw_get_no_finished_jobs(job_ring);
+ jobs_no_to_notify = (limit < 0 || limit > number_of_jobs_available) ?
+ number_of_jobs_available : limit;
+ VERBOSE("JR - pi %d, ci %d, ", job_ring->pidx, job_ring->cidx);
+ VERBOSE("Jobs submitted %d", number_of_jobs_available);
+ VERBOSE("Jobs to notify %d\n", jobs_no_to_notify);
+
+ while (jobs_no_to_notify > notified_descs_no) {
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ inv_dcache_range(
+ (uintptr_t)(&job_ring->output_ring[job_ring->cidx]),
+ sizeof(struct sec_outring_entry));
+ dmbsy();
+#endif
+
+ /* Get job status here */
+ sec_error_code =
+ sec_in32(&(job_ring->output_ring[job_ring->cidx].status));
+
+ /* Get completed descriptor
+ */
+ current_desc_loc = (uintptr_t)
+ &job_ring->output_ring[job_ring->cidx].desc;
+ current_desc_addr = sec_read_addr(current_desc_loc);
+
+ current_desc = ptov((phys_addr_t *) current_desc_addr);
+ if (current_desc == 0) {
+ ERROR("No descriptor returned from SEC");
+ assert(current_desc);
+ return 0;
+ }
+ /* now increment the consumer index for the current job ring,
+ * AFTER saving job in temporary location!
+ */
+ job_ring->cidx = SEC_CIRCULAR_COUNTER(job_ring->cidx,
+ SEC_JOB_RING_SIZE);
+
+ if (sec_error_code != 0) {
+ ERROR("desc at cidx %d\n ", job_ring->cidx);
+ ERROR("generated error %x\n", sec_error_code);
+
+ sec_handle_desc_error(job_ring,
+ sec_error_code,
+ &error_descs_no,
+ &do_driver_shutdown);
+ hw_remove_entries(job_ring, 1);
+
+ return -1;
+ }
+ /* Signal that the job has been processed & the slot is free */
+ hw_remove_entries(job_ring, 1);
+ notified_descs_no++;
+
+ arg_addr = (phys_addr_t *) (current_desc +
+ (MAX_DESC_SIZE_WORDS * sizeof(uint32_t)));
+
+ fnptr = (phys_addr_t *) (current_desc +
+ (MAX_DESC_SIZE_WORDS * sizeof(uint32_t)
+ + sizeof(void *)));
+
+ arg = (void *)*(arg_addr);
+ if (*fnptr != 0) {
+ VERBOSE("Callback Function called\n");
+ usercall = (user_callback) *(fnptr);
+ (*usercall) ((uint32_t *) current_desc,
+ sec_error_code, arg, job_ring);
+ }
+ }
+
+ return notified_descs_no;
+}
+
+void sec_handle_desc_error(sec_job_ring_t *job_ring,
+ uint32_t sec_error_code,
+ uint32_t *notified_descs,
+ uint32_t *do_driver_shutdown)
+{
+ /* Analyze the SEC error on this job ring */
+ hw_handle_job_ring_error(job_ring, sec_error_code);
+}
+
+void flush_job_rings(void)
+{
+ struct sec_job_ring_t *job_ring = NULL;
+ int i = 0;
+
+ for (i = 0; i < g_job_rings_no; i++) {
+ job_ring = &g_job_rings[i];
+ /* Producer index is frozen. If consumer index is not equal
+ * with producer index, then we have descs to flush.
+ */
+ while (job_ring->pidx != job_ring->cidx) {
+ hw_flush_job_ring(job_ring, false, 0, /* no error */
+ NULL);
+ }
+ }
+}
+
+int shutdown_job_ring(struct sec_job_ring_t *job_ring)
+{
+ int ret = 0;
+
+ ret = hw_shutdown_job_ring(job_ring);
+ if (ret != 0) {
+ ERROR("Failed to shutdown hardware job ring\n");
+ return ret;
+ }
+
+ if (job_ring->coalescing_en != 0) {
+ hw_job_ring_disable_coalescing(job_ring);
+ }
+
+ if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL) {
+ ret = jr_disable_irqs(job_ring);
+ if (ret != 0) {
+ ERROR("Failed to disable irqs for job ring");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int jr_enable_irqs(struct sec_job_ring_t *job_ring)
+{
+ uint32_t reg_val = 0U;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* Get the current value of the register */
+ reg_val = sec_in32(®s->jrcfg1);
+
+ /* Enable interrupts by disabling interrupt masking*/
+ reg_val &= ~JR_REG_JRCFG_LO_IMSK_EN;
+
+ /* Update parameters in HW */
+ sec_out32(®s->jrcfg1, reg_val);
+
+ VERBOSE("Enable interrupts on JR\n");
+
+ return 0;
+}
+
+int jr_disable_irqs(struct sec_job_ring_t *job_ring)
+{
+ uint32_t reg_val = 0U;
+ struct jobring_regs *regs =
+ (struct jobring_regs *)job_ring->register_base_addr;
+
+ /* Get the current value of the register */
+ reg_val = sec_in32(®s->jrcfg1);
+
+ /* Disable interrupts by enabling interrupt masking*/
+ reg_val |= JR_REG_JRCFG_LO_IMSK_EN;
+
+ /* Update parameters in HW */
+ sec_out32(®s->jrcfg1, reg_val);
+
+ VERBOSE("Disable interrupts on JR\n");
+
+ return 0;
+}
diff --git a/drivers/nxp/crypto/caam/src/sec_jr_driver.c b/drivers/nxp/crypto/caam/src/sec_jr_driver.c
new file mode 100644
index 0000000..1fe7007
--- /dev/null
+++ b/drivers/nxp/crypto/caam/src/sec_jr_driver.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include "caam.h"
+#include <common/debug.h>
+#include "jobdesc.h"
+#include "nxp_timer.h"
+#include "sec_hw_specific.h"
+#include "sec_jr_driver.h"
+
+
+/* Job rings used for communication with SEC HW */
+struct sec_job_ring_t g_job_rings[MAX_SEC_JOB_RINGS];
+
+/* The current state of SEC user space driver */
+volatile sec_driver_state_t g_driver_state = SEC_DRIVER_STATE_IDLE;
+
+int g_job_rings_no;
+
+uint8_t ip_ring[SEC_DMA_MEM_INPUT_RING_SIZE] __aligned(CACHE_WRITEBACK_GRANULE);
+uint8_t op_ring[SEC_DMA_MEM_OUTPUT_RING_SIZE] __aligned(CACHE_WRITEBACK_GRANULE);
+
+void *init_job_ring(uint8_t jr_mode,
+ uint16_t irq_coalescing_timer,
+ uint8_t irq_coalescing_count,
+ void *reg_base_addr, uint32_t irq_id)
+{
+ struct sec_job_ring_t *job_ring = &g_job_rings[g_job_rings_no++];
+ int ret = 0;
+
+ job_ring->register_base_addr = reg_base_addr;
+ job_ring->jr_mode = jr_mode;
+ job_ring->irq_fd = irq_id;
+
+ job_ring->input_ring = vtop(ip_ring);
+ memset(job_ring->input_ring, 0, SEC_DMA_MEM_INPUT_RING_SIZE);
+
+ job_ring->output_ring = (struct sec_outring_entry *)vtop(op_ring);
+ memset(job_ring->output_ring, 0, SEC_DMA_MEM_OUTPUT_RING_SIZE);
+
+ dsb();
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)(job_ring->input_ring),
+ SEC_DMA_MEM_INPUT_RING_SIZE),
+ flush_dcache_range((uintptr_t)(job_ring->output_ring),
+ SEC_DMA_MEM_OUTPUT_RING_SIZE),
+
+ dmbsy();
+#endif
+ /* Reset job ring in SEC hw and configure job ring registers */
+ ret = hw_reset_job_ring(job_ring);
+ if (ret != 0) {
+ ERROR("Failed to reset hardware job ring\n");
+ return NULL;
+ }
+
+ if (jr_mode == SEC_NOTIFICATION_TYPE_IRQ) {
+ /* Enable IRQ if driver work sin interrupt mode */
+ ERROR("Enabling DONE IRQ generation on job ring\n");
+ ret = jr_enable_irqs(job_ring);
+ if (ret != 0) {
+ ERROR("Failed to enable irqs for job ring\n");
+ return NULL;
+ }
+ }
+ if ((irq_coalescing_timer != 0) || (irq_coalescing_count != 0)) {
+ hw_job_ring_set_coalescing_param(job_ring,
+ irq_coalescing_timer,
+ irq_coalescing_count);
+
+ hw_job_ring_enable_coalescing(job_ring);
+ job_ring->coalescing_en = 1;
+ }
+
+ job_ring->jr_state = SEC_JOB_RING_STATE_STARTED;
+
+ return job_ring;
+}
+
+int sec_release(void)
+{
+ int i;
+
+ /* Validate driver state */
+ if (g_driver_state == SEC_DRIVER_STATE_RELEASE) {
+ ERROR("Driver release is already in progress");
+ return SEC_DRIVER_RELEASE_IN_PROGRESS;
+ }
+ /* Update driver state */
+ g_driver_state = SEC_DRIVER_STATE_RELEASE;
+
+ /* If any descriptors in flight , poll and wait
+ * until all descriptors are received and silently discarded.
+ */
+
+ flush_job_rings();
+
+ for (i = 0; i < g_job_rings_no; i++) {
+ shutdown_job_ring(&g_job_rings[i]);
+ }
+ g_job_rings_no = 0;
+ g_driver_state = SEC_DRIVER_STATE_IDLE;
+
+ return SEC_SUCCESS;
+}
+
+int sec_jr_lib_init(void)
+{
+ /* Validate driver state */
+ if (g_driver_state != SEC_DRIVER_STATE_IDLE) {
+ ERROR("Driver already initialized\n");
+ return 0;
+ }
+
+ memset(g_job_rings, 0, sizeof(g_job_rings));
+ g_job_rings_no = 0;
+
+ /* Update driver state */
+ g_driver_state = SEC_DRIVER_STATE_STARTED;
+ return 0;
+}
+
+int dequeue_jr(void *job_ring_handle, int32_t limit)
+{
+ int ret = 0;
+ int notified_descs_no = 0;
+ struct sec_job_ring_t *job_ring = (sec_job_ring_t *) job_ring_handle;
+ uint64_t start_time;
+
+ /* Validate driver state */
+ if (g_driver_state != SEC_DRIVER_STATE_STARTED) {
+ ERROR("Driver release in progress or driver not initialized\n");
+ return -1;
+ }
+
+ /* Validate input arguments */
+ if (job_ring == NULL) {
+ ERROR("job_ring_handle is NULL\n");
+ return -1;
+ }
+ if (((limit == 0) || (limit > SEC_JOB_RING_SIZE))) {
+ ERROR("Invalid limit parameter configuration\n");
+ return -1;
+ }
+
+ VERBOSE("JR Polling limit[%d]\n", limit);
+
+ /* Poll job ring
+ * If limit < 0 -> poll JR until no more notifications are available.
+ * If limit > 0 -> poll JR until limit is reached.
+ */
+
+ start_time = get_timer_val(0);
+
+ while (notified_descs_no == 0) {
+ /* Run hw poll job ring */
+ notified_descs_no = hw_poll_job_ring(job_ring, limit);
+ if (notified_descs_no < 0) {
+ ERROR("Error polling SEC engine job ring ");
+ return notified_descs_no;
+ }
+ VERBOSE("Jobs notified[%d]. ", notified_descs_no);
+
+ if (get_timer_val(start_time) >= CAAM_TIMEOUT) {
+ break;
+ }
+ }
+
+ if (job_ring->jr_mode == SEC_NOTIFICATION_TYPE_IRQ) {
+
+ /* Always enable IRQ generation when in pure IRQ mode */
+ ret = jr_enable_irqs(job_ring);
+ if (ret != 0) {
+ ERROR("Failed to enable irqs for job ring");
+ return ret;
+ }
+ }
+ return notified_descs_no;
+}
+
+int enq_jr_desc(void *job_ring_handle, struct job_descriptor *jobdescr)
+{
+ struct sec_job_ring_t *job_ring;
+
+ job_ring = (struct sec_job_ring_t *)job_ring_handle;
+
+ /* Validate driver state */
+ if (g_driver_state != SEC_DRIVER_STATE_STARTED) {
+ ERROR("Driver release in progress or driver not initialized\n");
+ return -1;
+ }
+
+ /* Check job ring state */
+ if (job_ring->jr_state != SEC_JOB_RING_STATE_STARTED) {
+ ERROR("Job ring is currently resetting\n");
+ return -1;
+ }
+
+ if (SEC_JOB_RING_IS_FULL(job_ring->pidx, job_ring->cidx,
+ SEC_JOB_RING_SIZE, SEC_JOB_RING_SIZE)) {
+ ERROR("Job ring is full\n");
+ return -1;
+ }
+
+ /* Set ptr in input ring to current descriptor */
+ sec_write_addr(&job_ring->input_ring[job_ring->pidx],
+ (phys_addr_t) vtop(jobdescr->desc));
+
+ dsb();
+
+#if defined(SEC_MEM_NON_COHERENT) && defined(IMAGE_BL2)
+ flush_dcache_range((uintptr_t)(&job_ring->input_ring[job_ring->pidx]),
+ sizeof(phys_addr_t));
+
+ inv_dcache_range((uintptr_t)(&job_ring->output_ring[job_ring->cidx]),
+ sizeof(struct sec_outring_entry));
+ dmbsy();
+#endif
+ /* Notify HW that a new job is enqueued */
+ hw_enqueue_desc_on_job_ring(
+ (struct jobring_regs *)job_ring->register_base_addr, 1);
+
+ /* increment the producer index for the current job ring */
+ job_ring->pidx = SEC_CIRCULAR_COUNTER(job_ring->pidx,
+ SEC_JOB_RING_SIZE);
+
+ return 0;
+}