feat(tc): factor in FVP/FPGA differences
Even though the FVP and FPGA are meant to be identical their RoS's (rest
of system) are different. Factor these in so the device tree works for
both. The differences are:
* addresses of GIC and UART
* displays (FPGA uses 4k)
* ethernet devices and SD card (it's non removable on the FPGA)
Their frequencies are also different. The FVP simulates certain
frequencies but isn't very sensitive when we disregard them. To keep
code similar, update them with the FPGA values. This keeps working on
FVP even if slightly incorrect.
Also add an option for the DPU to either use fixed clocks or SCMI set
clocks, hidden behind a flag. This is useful during bringup and because
SCMI may not necessarily work on FPGA.
Co-developed-by: Kshitij Sisodia <kshitij.sisodia@arm.com>
Co-developed-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Co-developed-by: Usama Arif <usama.arif@arm.com>
Co-developed-by: Angel Rodriguez Garcia <angel.rodriguezgarcia@arm.com>
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ic7a4bfc302673a3a6571757e23a9e6184fba2a13
diff --git a/fdts/tc_vers.dtsi b/fdts/tc_vers.dtsi
index 18f4e84..4311632 100644
--- a/fdts/tc_vers.dtsi
+++ b/fdts/tc_vers.dtsi
@@ -41,6 +41,73 @@
#define UARTCLK_FREQ 3750000
#endif /* TARGET_PLATFORM == 3 */
+#if TARGET_FLAVOUR_FVP
+#define STDOUT_PATH "serial0:115200n8"
+#define GIC_CTRL_ADDR 2c010000
+#define GIC_GICR_OFFSET 0x200000
+#define UART_OFFSET 0x1000
+#define VENCODER_TIMING_CLK 25175000
+#define VENCODER_TIMING \
+ clock-frequency = <VENCODER_TIMING_CLK>; \
+ hactive = <640>; \
+ vactive = <480>; \
+ hfront-porch = <16>; \
+ hback-porch = <48>; \
+ hsync-len = <96>; \
+ vfront-porch = <10>; \
+ vback-porch = <33>; \
+ vsync-len = <2>
+#define ETH_COMPATIBLE "smsc,lan91c111"
+#define MMC_REMOVABLE cd-gpios = <&sysreg 0 0>
+
+#else /* TARGET_FLAVOUR_FPGA */
+
+#define STDOUT_PATH "serial0:38400n8"
+#define GIC_CTRL_ADDR 30000000
+#define GIC_GICR_OFFSET 0x1000000
+#define UART_OFFSET 0x10000
+/* 1440x3200@120 framebuffer */
+#define VENCODER_TIMING_CLK 836000000
+#define VENCODER_TIMING \
+ clock-frequency = <VENCODER_TIMING_CLK>; \
+ hactive = <1440>; \
+ vactive = <3200>; \
+ hfront-porch = <136>; \
+ hback-porch = <296>; \
+ hsync-len = <160>; \
+ vfront-porch = <3>; \
+ vback-porch = <217>; \
+ vsync-len = <10>
+#define ETH_COMPATIBLE "smsc,lan9115"
+#define MMC_REMOVABLE non-removable
+#endif /* TARGET_FLAVOUR_FPGA */
+
+/* Use SCMI controlled clocks */
+#if TC_DPU_USE_SCMI_CLK
+#define DPU_CLK_ATTR1 \
+ clocks = <&scmi_clk 0>; \
+ clock-names = "aclk"
+
+#define DPU_CLK_ATTR2 \
+ clocks = <&scmi_clk 1>; \
+ clock-names = "pxclk"
+
+#define DPU_CLK_ATTR3 \
+ clocks = <&scmi_clk 2>; \
+ clock-names = "pxclk" \
+/* Use fixed clocks */
+#else /* !TC_DPU_USE_SCMI_CLK */
+#define DPU_CLK_ATTR1 \
+ clocks = <&dpu_aclk>; \
+ clock-names = "aclk"
+
+#define DPU_CLK_ATTR2 \
+ clocks = <&dpu_pixel_clk>, <&dpu_aclk>; \
+ clock-names = "pxclk", "aclk"
+
+#define DPU_CLK_ATTR3 DPU_CLK_ATTR2
+#endif /* !TC_DPU_USE_SCMI_CLK */
+
/ {
#if TARGET_PLATFORM <= 2
cmn-pmu {
@@ -49,4 +116,20 @@
interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
};
#endif /* TARGET_PLATFORM <= 2 */
+
+#if !TC_DPU_USE_SCMI_CLK
+ dpu_aclk: dpu_aclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <VENCODER_TIMING_CLK>;
+ clock-output-names = "fpga:dpu_aclk";
+ };
+
+ dpu_pixel_clk: dpu-pixel-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <VENCODER_TIMING_CLK>;
+ clock-output-names = "pxclk";
+ };
+#endif /* !TC_DPU_USE_SCMI_CLK */
};