diff --git a/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c b/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c
new file mode 100644
index 0000000..4df0195
--- /dev/null
+++ b/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <m0_ctl.h>
+#include <plat_private.h>
+#include <rk3399_def.h>
+#include <soc.h>
+
+void m0_init(void)
+{
+	/* secure config for M0 */
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(0), WMSK_BIT(7));
+	mmio_write_32(SGRF_BASE + SGRF_SOC_CON6, WMSK_BIT(12));
+
+	/* set the execute address for M0 */
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(3),
+		      BITS_WITH_WMASK((M0_BINCODE_BASE >> 12) & 0xffff,
+				      0xffff, 0));
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(7),
+		      BITS_WITH_WMASK((M0_BINCODE_BASE >> 28) & 0xf,
+				      0xf, 0));
+
+	/* gating disable for M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_GATEDIS_CON0, BIT_WITH_WMSK(1));
+
+	/*
+	 * To switch the parent to xin24M and div == 1,
+	 *
+	 * We need to close most of the PLLs and clocks except the OSC 24MHz
+	 * durning suspend, and this should be enough to supplies the ddrfreq,
+	 * For the simple handle, we just keep the fixed 24MHz to supply the
+	 * suspend and ddrfreq directly.
+	 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKSEL_CON0,
+		      BIT_WITH_WMSK(15) | BITS_WITH_WMASK(0x0, 0x1f, 8));
+}
+
+void m0_start(void)
+{
+	/* clean the PARAM_M0_DONE flag, mean that M0 will start working */
+	mmio_write_32(M0_PARAM_ADDR + PARAM_M0_DONE, 0);
+
+	/* enable clocks for M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2,
+		      BITS_WITH_WMASK(0x0, 0x2f, 0));
+
+	/* start M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_SOFTRST_CON0,
+		      BITS_WITH_WMASK(0x0, 0x24, 0));
+}
+
+void m0_stop(void)
+{
+	/* stop M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_SOFTRST_CON0,
+		      BITS_WITH_WMASK(0x24, 0x24, 0));
+
+	/* disable clocks for M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2,
+		      BITS_WITH_WMASK(0x2f, 0x2f, 0));
+}
+
+void m0_wait_done(void)
+{
+	while (mmio_read_32(M0_PARAM_ADDR + PARAM_M0_DONE) != M0_DONE_FLAG)
+		dsb();
+}