diff --git a/drivers/arm/gic/common/gic_common.c b/drivers/arm/gic/common/gic_common.c
new file mode 100644
index 0000000..17be61d
--- /dev/null
+++ b/drivers/arm/gic/common/gic_common.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <gic_common.h>
+#include <mmio.h>
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for reading entire registers
+ ******************************************************************************/
+/*
+ * Accessor to read the GIC Distributor IGROUPR corresponding to the interrupt
+ * `id`, 32 interrupt ids at a time.
+ */
+unsigned int gicd_read_igroupr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> IGROUPR_SHIFT;
+	return mmio_read_32(base + GICD_IGROUPR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ISENABLER corresponding to the
+ * interrupt `id`, 32 interrupt ids at a time.
+ */
+unsigned int gicd_read_isenabler(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ISENABLER_SHIFT;
+	return mmio_read_32(base + GICD_ISENABLER + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ICENABLER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_icenabler(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ICENABLER_SHIFT;
+	return mmio_read_32(base + GICD_ICENABLER + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ISPENDR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_ispendr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ISPENDR_SHIFT;
+	return mmio_read_32(base + GICD_ISPENDR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ICPENDR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_icpendr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ICPENDR_SHIFT;
+	return mmio_read_32(base + GICD_ICPENDR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ISACTIVER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_isactiver(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ISACTIVER_SHIFT;
+	return mmio_read_32(base + GICD_ISACTIVER + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ICACTIVER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_icactiver(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ICACTIVER_SHIFT;
+	return mmio_read_32(base + GICD_ICACTIVER + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor IPRIORITYR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+unsigned int gicd_read_ipriorityr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	return mmio_read_32(base + GICD_IPRIORITYR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor ICGFR corresponding to the
+ * interrupt `id`, 16 interrupt IDs at a time.
+ */
+unsigned int gicd_read_icfgr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> ICFGR_SHIFT;
+	return mmio_read_32(base + GICD_ICFGR + (n << 2));
+}
+
+/*
+ * Accessor to read the GIC Distributor NSACR corresponding to the
+ * interrupt `id`, 16 interrupt IDs at a time.
+ */
+unsigned int gicd_read_nsacr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> NSACR_SHIFT;
+	return mmio_read_32(base + GICD_NSACR + (n << 2));
+}
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for writing entire registers
+ ******************************************************************************/
+/*
+ * Accessor to write the GIC Distributor IGROUPR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_igroupr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IGROUPR_SHIFT;
+	mmio_write_32(base + GICD_IGROUPR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ISENABLER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_isenabler(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISENABLER_SHIFT;
+	mmio_write_32(base + GICD_ISENABLER + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ICENABLER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_icenabler(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICENABLER_SHIFT;
+	mmio_write_32(base + GICD_ICENABLER + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ISPENDR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_ispendr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISPENDR_SHIFT;
+	mmio_write_32(base + GICD_ISPENDR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ICPENDR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_icpendr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICPENDR_SHIFT;
+	mmio_write_32(base + GICD_ICPENDR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ISACTIVER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_isactiver(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISACTIVER_SHIFT;
+	mmio_write_32(base + GICD_ISACTIVER + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ICACTIVER corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_icactiver(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICACTIVER_SHIFT;
+	mmio_write_32(base + GICD_ICACTIVER + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor IPRIORITYR corresponding to the
+ * interrupt `id`, 4 interrupt IDs at a time.
+ */
+void gicd_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	mmio_write_32(base + GICD_IPRIORITYR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor ICFGR corresponding to the
+ * interrupt `id`, 16 interrupt IDs at a time.
+ */
+void gicd_write_icfgr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICFGR_SHIFT;
+	mmio_write_32(base + GICD_ICFGR + (n << 2), val);
+}
+
+/*
+ * Accessor to write the GIC Distributor NSACR corresponding to the
+ * interrupt `id`, 16 interrupt IDs at a time.
+ */
+void gicd_write_nsacr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> NSACR_SHIFT;
+	mmio_write_32(base + GICD_NSACR + (n << 2), val);
+}
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for individual interrupt manipulation
+ ******************************************************************************/
+unsigned int gicd_get_igroupr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	return (reg_val >> bit_num) & 0x1;
+}
+
+void gicd_set_igroupr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	gicd_write_igroupr(base, id, reg_val | (1 << bit_num));
+}
+
+void gicd_clr_igroupr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	gicd_write_igroupr(base, id, reg_val & ~(1 << bit_num));
+}
+
+void gicd_set_isenabler(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1);
+
+	gicd_write_isenabler(base, id, (1 << bit_num));
+}
+
+void gicd_set_icenabler(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICENABLER_SHIFT) - 1);
+
+	gicd_write_icenabler(base, id, (1 << bit_num));
+}
+
+void gicd_set_ispendr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISPENDR_SHIFT) - 1);
+
+	gicd_write_ispendr(base, id, (1 << bit_num));
+}
+
+void gicd_set_icpendr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICPENDR_SHIFT) - 1);
+
+	gicd_write_icpendr(base, id, (1 << bit_num));
+}
+
+void gicd_set_isactiver(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISACTIVER_SHIFT) - 1);
+
+	gicd_write_isactiver(base, id, (1 << bit_num));
+}
+
+void gicd_set_icactiver(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICACTIVER_SHIFT) - 1);
+
+	gicd_write_icactiver(base, id, (1 << bit_num));
+}
diff --git a/drivers/arm/gic/v3/gicv3_helpers.c b/drivers/arm/gic/v3/gicv3_helpers.c
new file mode 100644
index 0000000..6e8251d
--- /dev/null
+++ b/drivers/arm/gic/v3/gicv3_helpers.c
@@ -0,0 +1,415 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <gic_common.h>
+#include "gicv3_private.h"
+
+/*
+ * Accessor to read the GIC Distributor IGRPMODR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> IGRPMODR_SHIFT;
+	return mmio_read_32(base + GICD_IGRPMODR + (n << 2));
+}
+
+/*
+ * Accessor to write the GIC Distributor IGRPMODR corresponding to the
+ * interrupt `id`, 32 interrupt IDs at a time.
+ */
+void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IGRPMODR_SHIFT;
+	mmio_write_32(base + GICD_IGRPMODR + (n << 2), val);
+}
+
+/*
+ * Accessor to get the bit corresponding to interrupt ID
+ * in GIC Distributor IGRPMODR.
+ */
+unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igrpmodr(base, id);
+
+	return (reg_val >> bit_num) & 0x1;
+}
+
+/*
+ * Accessor to set the bit corresponding to interrupt ID
+ * in GIC Distributor IGRPMODR.
+ */
+void gicd_set_igrpmodr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igrpmodr(base, id);
+
+	gicd_write_igrpmodr(base, id, reg_val | (1 << bit_num));
+}
+
+/*
+ * Accessor to clear the bit corresponding to interrupt ID
+ * in GIC Distributor IGRPMODR.
+ */
+void gicd_clr_igrpmodr(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igrpmodr(base, id);
+
+	gicd_write_igrpmodr(base, id, reg_val & ~(1 << bit_num));
+}
+
+/*
+ * Accessor to read the GIC Re-distributor IPRIORITYR corresponding to the
+ * interrupt `id`, 4 interrupts IDs at a time.
+ */
+unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	return mmio_read_32(base + GICR_IPRIORITYR + (n << 2));
+}
+
+/*
+ * Accessor to write the GIC Re-distributor IPRIORITYR corresponding to the
+ * interrupt `id`, 4 interrupts IDs at a time.
+ */
+void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	mmio_write_32(base + GICR_IPRIORITYR + (n << 2), val);
+}
+
+/*
+ * Accessor to get the bit corresponding to interrupt ID
+ * from GIC Re-distributor IGROUPR0.
+ */
+unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igroupr0(base);
+
+	return (reg_val >> bit_num) & 0x1;
+}
+
+/*
+ * Accessor to set the bit corresponding to interrupt ID
+ * in GIC Re-distributor IGROUPR0.
+ */
+void gicr_set_igroupr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igroupr0(base);
+
+	gicr_write_igroupr0(base, reg_val | (1 << bit_num));
+}
+
+/*
+ * Accessor to clear the bit corresponding to interrupt ID
+ * in GIC Re-distributor IGROUPR0.
+ */
+void gicr_clr_igroupr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igroupr0(base);
+
+	gicr_write_igroupr0(base, reg_val & ~(1 << bit_num));
+}
+
+/*
+ * Accessor to get the bit corresponding to interrupt ID
+ * from GIC Re-distributor IGRPMODR0.
+ */
+unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igrpmodr0(base);
+
+	return (reg_val >> bit_num) & 0x1;
+}
+
+/*
+ * Accessor to set the bit corresponding to interrupt ID
+ * in GIC Re-distributor IGRPMODR0.
+ */
+void gicr_set_igrpmodr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igrpmodr0(base);
+
+	gicr_write_igrpmodr0(base, reg_val | (1 << bit_num));
+}
+
+/*
+ * Accessor to clear the bit corresponding to interrupt ID
+ * in GIC Re-distributor IGRPMODR0.
+ */
+void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGRPMODR_SHIFT) - 1);
+	unsigned int reg_val = gicr_read_igrpmodr0(base);
+
+	gicr_write_igrpmodr0(base, reg_val & ~(1 << bit_num));
+}
+
+/*
+ * Accessor to set the bit corresponding to interrupt ID
+ * in GIC Re-distributor ISENABLER0.
+ */
+void gicr_set_isenabler0(uintptr_t base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1);
+
+	gicr_write_isenabler0(base, (1 << bit_num));
+}
+
+/******************************************************************************
+ * This function marks the core as awake in the re-distributor and
+ * ensures that the interface is active.
+ *****************************************************************************/
+void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base)
+{
+	/*
+	 * The WAKER_PS_BIT should be changed to 0
+	 * only when WAKER_CA_BIT is 1.
+	 */
+	assert(gicr_read_waker(gicr_base) & WAKER_CA_BIT);
+
+	/* Mark the connected core as awake */
+	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) & ~WAKER_PS_BIT);
+
+	/* Wait till the WAKER_CA_BIT changes to 0 */
+	while (gicr_read_waker(gicr_base) & WAKER_CA_BIT)
+		;
+}
+
+
+/******************************************************************************
+ * This function marks the core as asleep in the re-distributor and ensures
+ * that the interface is quiescent.
+ *****************************************************************************/
+void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base)
+{
+	/* Mark the connected core as asleep */
+	gicr_write_waker(gicr_base, gicr_read_waker(gicr_base) | WAKER_PS_BIT);
+
+	/* Wait till the WAKER_CA_BIT changes to 1 */
+	while (!(gicr_read_waker(gicr_base) & WAKER_CA_BIT))
+		;
+}
+
+
+/*******************************************************************************
+ * This function probes the Redistributor frames when the driver is initialised
+ * and saves their base addresses. These base addresses are used later to
+ * initialise each Redistributor interface.
+ ******************************************************************************/
+void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
+					unsigned int rdistif_num,
+					uintptr_t gicr_base,
+					mpidr_hash_fn mpidr_to_core_pos)
+{
+	unsigned long mpidr;
+	unsigned int proc_num;
+	unsigned long long typer_val;
+	uintptr_t rdistif_base = gicr_base;
+
+	assert(rdistif_base_addrs);
+
+	/*
+	 * Iterate over the Redistributor frames. Store the base address of each
+	 * frame in the platform provided array. Use the "Processor Number"
+	 * field to index into the array if the platform has not provided a hash
+	 * function to convert an MPIDR (obtained from the "Affinity Value"
+	 * field into a linear index.
+	 */
+	do {
+		typer_val = gicr_read_typer(rdistif_base);
+		if (mpidr_to_core_pos) {
+			mpidr = mpidr_from_gicr_typer(typer_val);
+			proc_num = mpidr_to_core_pos(mpidr);
+		} else {
+			proc_num = (typer_val >> TYPER_PROC_NUM_SHIFT) &
+				TYPER_PROC_NUM_MASK;
+		}
+		assert(proc_num < rdistif_num);
+		rdistif_base_addrs[proc_num] = rdistif_base;
+		rdistif_base += (1 << GICR_PCPUBASE_SHIFT);
+	} while (!(typer_val & TYPER_LAST_BIT));
+}
+
+/*******************************************************************************
+ * Helper function to configure the default attributes of SPIs.
+ ******************************************************************************/
+void gicv3_spis_configure_defaults(uintptr_t gicd_base)
+{
+	unsigned int index, num_ints;
+
+	num_ints = gicd_read_typer(gicd_base);
+	num_ints &= TYPER_IT_LINES_NO_MASK;
+	num_ints = (num_ints + 1) << 5;
+
+	/*
+	 * Treat all SPIs as G1NS by default. The number of interrupts is
+	 * calculated as 32 * (IT_LINES + 1). We do 32 at a time.
+	 */
+	for (index = MIN_SPI_ID; index < num_ints; index += 32)
+		gicd_write_igroupr(gicd_base, index, ~0U);
+
+	/* Setup the default SPI priorities doing four at a time */
+	for (index = MIN_SPI_ID; index < num_ints; index += 4)
+		gicd_write_ipriorityr(gicd_base,
+				      index,
+				      GICD_IPRIORITYR_DEF_VAL);
+
+	/*
+	 * Treat all SPIs as level triggered by default, write 16 at
+	 * a time
+	 */
+	for (index = MIN_SPI_ID; index < num_ints; index += 16)
+		gicd_write_icfgr(gicd_base, index, 0);
+}
+
+/*******************************************************************************
+ * Helper function to configure secure G0 and G1S SPIs.
+ ******************************************************************************/
+void gicv3_secure_spis_configure(uintptr_t gicd_base,
+				     unsigned int num_ints,
+				     const unsigned int *sec_intr_list,
+				     unsigned int int_grp)
+{
+	unsigned int index, irq_num;
+	uint64_t gic_affinity_val;
+
+	assert((int_grp == INT_TYPE_G1S) || (int_grp == INT_TYPE_G0));
+	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
+	assert(num_ints ? (uintptr_t)sec_intr_list : 1);
+
+	for (index = 0; index < num_ints; index++) {
+		irq_num = sec_intr_list[index];
+		if (irq_num >= MIN_SPI_ID) {
+
+			/* Configure this interrupt as a secure interrupt */
+			gicd_clr_igroupr(gicd_base, irq_num);
+
+			/* Configure this interrupt as G0 or a G1S interrupt */
+			if (int_grp == INT_TYPE_G1S)
+				gicd_set_igrpmodr(gicd_base, irq_num);
+			else
+				gicd_clr_igrpmodr(gicd_base, irq_num);
+
+			/* Set the priority of this interrupt */
+			gicd_write_ipriorityr(gicd_base,
+					      irq_num,
+					      GIC_HIGHEST_SEC_PRIORITY);
+
+			/* Target SPIs to the primary CPU */
+			gic_affinity_val =
+				gicd_irouter_val_from_mpidr(read_mpidr(), 0);
+			gicd_write_irouter(gicd_base,
+					   irq_num,
+					   gic_affinity_val);
+
+			/* Enable this interrupt */
+			gicd_set_isenabler(gicd_base, irq_num);
+		}
+	}
+
+}
+
+/*******************************************************************************
+ * Helper function to configure the default attributes of SPIs.
+ ******************************************************************************/
+void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base)
+{
+	unsigned int index;
+
+	/*
+	 * Disable all SGIs (imp. def.)/PPIs before configuring them. This is a
+	 * more scalable approach as it avoids clearing the enable bits in the
+	 * GICD_CTLR
+	 */
+	gicr_write_icenabler0(gicr_base, ~0);
+	gicr_wait_for_pending_write(gicr_base);
+
+	/* Treat all SGIs/PPIs as G1NS by default. */
+	gicr_write_igroupr0(gicr_base, ~0U);
+
+	/* Setup the default PPI/SGI priorities doing four at a time */
+	for (index = 0; index < MIN_SPI_ID; index += 4)
+		gicr_write_ipriorityr(gicr_base,
+				      index,
+				      GICD_IPRIORITYR_DEF_VAL);
+
+	/* Configure all PPIs as level triggered by default */
+	gicr_write_icfgr1(gicr_base, 0);
+}
+
+/*******************************************************************************
+ * Helper function to configure secure G0 and G1S SPIs.
+ ******************************************************************************/
+void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
+					unsigned int num_ints,
+					const unsigned int *sec_intr_list,
+					unsigned int int_grp)
+{
+	unsigned int index, irq_num;
+
+	assert((int_grp == INT_TYPE_G1S) || (int_grp == INT_TYPE_G0));
+	/* If `num_ints` is not 0, ensure that `sec_intr_list` is not NULL */
+	assert(num_ints ? (uintptr_t)sec_intr_list : 1);
+
+	for (index = 0; index < num_ints; index++) {
+		irq_num = sec_intr_list[index];
+		if (irq_num < MIN_SPI_ID) {
+
+			/* Configure this interrupt as a secure interrupt */
+			gicr_clr_igroupr0(gicr_base, irq_num);
+
+			/* Configure this interrupt as G0 or a G1S interrupt */
+			if (int_grp == INT_TYPE_G1S)
+				gicr_set_igrpmodr0(gicr_base, irq_num);
+			else
+				gicr_clr_igrpmodr0(gicr_base, irq_num);
+
+			/* Set the priority of this interrupt */
+			gicr_write_ipriorityr(gicr_base,
+					    irq_num,
+					    GIC_HIGHEST_SEC_PRIORITY);
+
+			/* Enable this interrupt */
+			gicr_set_isenabler0(gicr_base, irq_num);
+		}
+	}
+}
diff --git a/drivers/arm/gic/v3/gicv3_main.c b/drivers/arm/gic/v3/gicv3_main.c
new file mode 100644
index 0000000..06311e3
--- /dev/null
+++ b/drivers/arm/gic/v3/gicv3_main.c
@@ -0,0 +1,381 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <debug.h>
+#include <gic_common.h>
+#include <gicv3.h>
+#include "gicv3_private.h"
+
+static const gicv3_driver_data_t *driver_data;
+static unsigned int gicv2_compat;
+
+/*******************************************************************************
+ * This function initialises the ARM GICv3 driver in EL3 with provided platform
+ * inputs.
+ ******************************************************************************/
+void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data)
+{
+	unsigned int gic_version;
+
+	assert(plat_driver_data);
+	assert(plat_driver_data->gicd_base);
+	assert(plat_driver_data->gicr_base);
+	assert(plat_driver_data->rdistif_num);
+	assert(plat_driver_data->rdistif_base_addrs);
+
+	assert(IS_IN_EL3());
+
+	/*
+	 * The platform should provide a list of at least one type of
+	 * interrupts
+	 */
+	assert(plat_driver_data->g0_interrupt_array ||
+	       plat_driver_data->g1s_interrupt_array);
+
+	/*
+	 * If there are no interrupts of a particular type, then the number of
+	 * interrupts of that type should be 0 and vice-versa.
+	 */
+	assert(plat_driver_data->g0_interrupt_array ?
+	       plat_driver_data->g0_interrupt_num :
+	       plat_driver_data->g0_interrupt_num == 0);
+	assert(plat_driver_data->g1s_interrupt_array ?
+	       plat_driver_data->g1s_interrupt_num :
+	       plat_driver_data->g1s_interrupt_num == 0);
+
+	/* Check for system register support */
+	assert(read_id_aa64pfr0_el1() &
+			(ID_AA64PFR0_GIC_MASK << ID_AA64PFR0_GIC_SHIFT));
+
+	/* The GIC version should be 3.0 */
+	gic_version = gicd_read_pidr2(plat_driver_data->gicd_base);
+	gic_version >>=	PIDR2_ARCH_REV_SHIFT;
+	gic_version &= PIDR2_ARCH_REV_MASK;
+	assert(gic_version == ARCH_REV_GICV3);
+
+	/*
+	 * Find out whether the GIC supports the GICv2 compatibility mode. The
+	 * ARE_S bit resets to 0 if supported
+	 */
+	gicv2_compat = gicd_read_ctlr(plat_driver_data->gicd_base);
+	gicv2_compat >>= CTLR_ARE_S_SHIFT;
+	gicv2_compat = !(gicv2_compat & CTLR_ARE_S_MASK);
+
+	/*
+	 * Find the base address of each implemented Redistributor interface.
+	 * The number of interfaces should be equal to the number of CPUs in the
+	 * system. The memory for saving these addresses has to be allocated by
+	 * the platform port
+	 */
+	gicv3_rdistif_base_addrs_probe(plat_driver_data->rdistif_base_addrs,
+					   plat_driver_data->rdistif_num,
+					   plat_driver_data->gicr_base,
+					   plat_driver_data->mpidr_to_core_pos);
+
+	driver_data = plat_driver_data;
+
+	INFO("GICv3 %s legacy support detected."
+			" ARM GICV3 driver initialized in EL3\n",
+			gicv2_compat ? "with" : "without");
+}
+
+/*******************************************************************************
+ * This function initialises the GIC distributor interface based upon the data
+ * provided by the platform while initialising the driver.
+ ******************************************************************************/
+void gicv3_distif_init(void)
+{
+	assert(driver_data);
+	assert(driver_data->gicd_base);
+	assert(driver_data->g1s_interrupt_array);
+	assert(driver_data->g0_interrupt_array);
+
+	assert(IS_IN_EL3());
+
+	/*
+	 * Clear the "enable" bits for G0/G1S/G1NS interrupts before configuring
+	 * the ARE_S bit. The Distributor might generate a system error
+	 * otherwise.
+	 */
+	gicd_clr_ctlr(driver_data->gicd_base,
+		      CTLR_ENABLE_G0_BIT |
+		      CTLR_ENABLE_G1S_BIT |
+		      CTLR_ENABLE_G1NS_BIT,
+		      RWP_TRUE);
+
+	/* Set the ARE_S and ARE_NS bit now that interrupts have been disabled */
+	gicd_set_ctlr(driver_data->gicd_base,
+			CTLR_ARE_S_BIT | CTLR_ARE_NS_BIT, RWP_TRUE);
+
+	/* Set the default attribute of all SPIs */
+	gicv3_spis_configure_defaults(driver_data->gicd_base);
+
+	/* Configure the G1S SPIs */
+	gicv3_secure_spis_configure(driver_data->gicd_base,
+					driver_data->g1s_interrupt_num,
+					driver_data->g1s_interrupt_array,
+					INT_TYPE_G1S);
+
+	/* Configure the G0 SPIs */
+	gicv3_secure_spis_configure(driver_data->gicd_base,
+					driver_data->g0_interrupt_num,
+					driver_data->g0_interrupt_array,
+					INT_TYPE_G0);
+
+	/* Enable the secure SPIs now that they have been configured */
+	gicd_set_ctlr(driver_data->gicd_base,
+		      CTLR_ENABLE_G1S_BIT | CTLR_ENABLE_G0_BIT,
+		      RWP_TRUE);
+}
+
+/*******************************************************************************
+ * This function initialises the GIC Redistributor interface of the calling CPU
+ * (identified by the 'proc_num' parameter) based upon the data provided by the
+ * platform while initialising the driver.
+ ******************************************************************************/
+void gicv3_rdistif_init(unsigned int proc_num)
+{
+	uintptr_t gicr_base;
+
+	assert(driver_data);
+	assert(proc_num < driver_data->rdistif_num);
+	assert(driver_data->rdistif_base_addrs);
+	assert(driver_data->gicd_base);
+	assert(gicd_read_ctlr(driver_data->gicd_base) & CTLR_ARE_S_BIT);
+	assert(driver_data->g1s_interrupt_array);
+	assert(driver_data->g0_interrupt_array);
+
+	assert(IS_IN_EL3());
+
+	gicr_base = driver_data->rdistif_base_addrs[proc_num];
+
+	/* Set the default attribute of all SGIs and PPIs */
+	gicv3_ppi_sgi_configure_defaults(gicr_base);
+
+	/* Configure the G1S SGIs/PPIs */
+	gicv3_secure_ppi_sgi_configure(gicr_base,
+					   driver_data->g1s_interrupt_num,
+					   driver_data->g1s_interrupt_array,
+					   INT_TYPE_G1S);
+
+	/* Configure the G0 SGIs/PPIs */
+	gicv3_secure_ppi_sgi_configure(gicr_base,
+					   driver_data->g0_interrupt_num,
+					   driver_data->g0_interrupt_array,
+					   INT_TYPE_G0);
+}
+
+/*******************************************************************************
+ * This function enables the GIC CPU interface of the calling CPU using only
+ * system register accesses.
+ ******************************************************************************/
+void gicv3_cpuif_enable(unsigned int proc_num)
+{
+	uintptr_t gicr_base;
+	unsigned int scr_el3;
+	unsigned int icc_sre_el3;
+
+	assert(driver_data);
+	assert(proc_num < driver_data->rdistif_num);
+	assert(driver_data->rdistif_base_addrs);
+	assert(IS_IN_EL3());
+
+	/* Mark the connected core as awake */
+	gicr_base = driver_data->rdistif_base_addrs[proc_num];
+	gicv3_rdistif_mark_core_awake(gicr_base);
+
+	/* Disable the legacy interrupt bypass */
+	icc_sre_el3 = ICC_SRE_DIB_BIT | ICC_SRE_DFB_BIT;
+
+	/*
+	 * Enable system register access for EL3 and allow lower exception
+	 * levels to configure the same for themselves. If the legacy mode is
+	 * not supported, the SRE bit is RAO/WI
+	 */
+	icc_sre_el3 |= (ICC_SRE_EN_BIT | ICC_SRE_SRE_BIT);
+	write_icc_sre_el3(read_icc_sre_el3() | icc_sre_el3);
+
+	scr_el3 = read_scr_el3();
+
+	/*
+	 * Switch to NS state to write Non secure ICC_SRE_EL1 and
+	 * ICC_SRE_EL2 registers.
+	 */
+	write_scr_el3(scr_el3 | SCR_NS_BIT);
+	isb();
+
+	write_icc_sre_el2(read_icc_sre_el2() | icc_sre_el3);
+	write_icc_sre_el1(ICC_SRE_SRE_BIT);
+	isb();
+
+	/* Switch to secure state. */
+	write_scr_el3(scr_el3 & (~SCR_NS_BIT));
+	isb();
+
+	/* Program the idle priority in the PMR */
+	write_icc_pmr_el1(GIC_PRI_MASK);
+
+	/* Enable Group0 interrupts */
+	write_icc_igrpen0_el1(IGRPEN1_EL1_ENABLE_G0_BIT);
+
+	/* Enable Group1 Secure interrupts */
+	write_icc_igrpen1_el3(read_icc_igrpen1_el3() |
+				IGRPEN1_EL3_ENABLE_G1S_BIT);
+
+	/* Write the secure ICC_SRE_EL1 register */
+	write_icc_sre_el1(ICC_SRE_SRE_BIT);
+	isb();
+}
+
+/*******************************************************************************
+ * This function disables the GIC CPU interface of the calling CPU using
+ * only system register accesses.
+ ******************************************************************************/
+void gicv3_cpuif_disable(unsigned int proc_num)
+{
+	uintptr_t gicr_base;
+
+	assert(driver_data);
+	assert(proc_num < driver_data->rdistif_num);
+	assert(driver_data->rdistif_base_addrs);
+
+	assert(IS_IN_EL3());
+
+	/* Disable legacy interrupt bypass */
+	write_icc_sre_el3(read_icc_sre_el3() |
+			  (ICC_SRE_DIB_BIT | ICC_SRE_DFB_BIT));
+
+	/* Disable Group0 interrupts */
+	write_icc_igrpen0_el1(read_icc_igrpen0_el1() &
+			      ~IGRPEN1_EL1_ENABLE_G0_BIT);
+
+	/* Disable Group1 Secure interrupts */
+	write_icc_igrpen1_el3(read_icc_igrpen1_el3() &
+			      ~IGRPEN1_EL3_ENABLE_G1S_BIT);
+
+	/* Synchronise accesses to group enable registers */
+	isb();
+
+	/* Mark the connected core as asleep */
+	gicr_base = driver_data->rdistif_base_addrs[proc_num];
+	gicv3_rdistif_mark_core_asleep(gicr_base);
+}
+
+/*******************************************************************************
+ * This function returns the id of the highest priority pending interrupt at
+ * the GIC cpu interface.
+ ******************************************************************************/
+unsigned int gicv3_get_pending_interrupt_id(void)
+{
+	unsigned int id;
+
+	assert(IS_IN_EL3());
+	id = read_icc_hppir0_el1() & HPPIR0_EL1_INTID_MASK;
+
+	/*
+	 * If the ID is special identifier corresponding to G1S or G1NS
+	 * interrupt, then read the highest pending group 1 interrupt.
+	 */
+	if ((id == PENDING_G1S_INTID) || (id == PENDING_G1NS_INTID))
+		return read_icc_hppir1_el1() & HPPIR1_EL1_INTID_MASK;
+
+	return id;
+}
+
+/*******************************************************************************
+ * This function returns the type of the highest priority pending interrupt at
+ * the GIC cpu interface. The return values can be one of the following :
+ *   PENDING_G1S_INTID  : The interrupt type is secure Group 1.
+ *   PENDING_G1NS_INTID : The interrupt type is non secure Group 1.
+ *   0 - 1019           : The interrupt type is secure Group 0.
+ *   GIC_SPURIOUS_INTERRUPT : there is no pending interrupt with
+ *                            sufficient priority to be signaled
+ ******************************************************************************/
+unsigned int gicv3_get_pending_interrupt_type(void)
+{
+	assert(IS_IN_EL3());
+	return read_icc_hppir0_el1() & HPPIR0_EL1_INTID_MASK;
+}
+
+/*******************************************************************************
+ * This function returns the type of the interrupt id depending upon the group
+ * this interrupt has been configured under by the interrupt controller i.e.
+ * group0 or group1 Secure / Non Secure. The return value can be one of the
+ * following :
+ *    INT_TYPE_G0  : The interrupt type is a Secure Group 0 interrupt
+ *    INT_TYPE_G1S : The interrupt type is a Secure Group 1 secure interrupt
+ *    INT_TYPE_G1NS: The interrupt type is a Secure Group 1 non secure
+ *                   interrupt.
+ ******************************************************************************/
+unsigned int gicv3_get_interrupt_type(unsigned int id,
+					  unsigned int proc_num)
+{
+	unsigned int igroup, grpmodr;
+	uintptr_t gicr_base;
+
+	assert(IS_IN_EL3());
+	assert(driver_data);
+
+	/* Ensure the parameters are valid */
+	assert(id < PENDING_G1S_INTID || id >= MIN_LPI_ID);
+	assert(proc_num < driver_data->rdistif_num);
+
+	/* All LPI interrupts are Group 1 non secure */
+	if (id >= MIN_LPI_ID)
+		return INT_TYPE_G1NS;
+
+	if (id < MIN_SPI_ID) {
+		assert(driver_data->rdistif_base_addrs);
+		gicr_base = driver_data->rdistif_base_addrs[proc_num];
+		igroup = gicr_get_igroupr0(gicr_base, id);
+		grpmodr = gicr_get_igrpmodr0(gicr_base, id);
+	} else {
+		assert(driver_data->gicd_base);
+		igroup = gicd_get_igroupr(driver_data->gicd_base, id);
+		grpmodr = gicd_get_igrpmodr(driver_data->gicd_base, id);
+	}
+
+	/*
+	 * If the IGROUP bit is set, then it is a Group 1 Non secure
+	 * interrupt
+	 */
+	if (igroup)
+		return INT_TYPE_G1NS;
+
+	/* If the GRPMOD bit is set, then it is a Group 1 Secure interrupt */
+	if (grpmodr)
+		return INT_TYPE_G1S;
+
+	/* Else it is a Group 0 Secure interrupt */
+	return INT_TYPE_G0;
+}
diff --git a/drivers/arm/gic/v3/gicv3_private.h b/drivers/arm/gic/v3/gicv3_private.h
new file mode 100644
index 0000000..c8b311a
--- /dev/null
+++ b/drivers/arm/gic/v3/gicv3_private.h
@@ -0,0 +1,232 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __GICV3_PRIVATE_H__
+#define __GICV3_PRIVATE_H__
+
+#include <gicv3.h>
+#include <mmio.h>
+#include <stdint.h>
+
+/*******************************************************************************
+ * GICv3 private macro definitions
+ ******************************************************************************/
+
+/* Constants to indicate the status of the RWP bit */
+#define RWP_TRUE		1
+#define RWP_FALSE		0
+
+/*
+ * Macro to wait for updates to :
+ * GICD_CTLR[2:0] - the Group Enables
+ * GICD_CTLR[5:4] - the ARE bits
+ * GICD_ICENABLERn - the clearing of enable state for SPIs
+ */
+#define gicd_wait_for_pending_write(gicd_base)			\
+	do {							\
+		;						\
+	} while (gicd_read_ctlr(gicd_base) & GICD_CTLR_RWP_BIT)
+
+/*
+ * Macro to convert an mpidr to a value suitable for programming into a
+ * GICD_IROUTER. Bits[31:24] in the MPIDR are cleared as they are not relevant
+ * to GICv3.
+ */
+#define gicd_irouter_val_from_mpidr(mpidr, irm)		\
+	((mpidr & ~(0xff << 24)) |			\
+	 (irm & IROUTER_IRM_MASK) << IROUTER_IRM_SHIFT)
+
+/*
+ * Macro to wait for updates to :
+ * GICR_ICENABLER0
+ * GICR_CTLR.DPG1S
+ * GICR_CTLR.DPG1NS
+ * GICR_CTLR.DPG0
+ */
+#define gicr_wait_for_pending_write(gicr_base)			\
+	do {							\
+		;						\
+	} while (gicr_read_ctlr(gicr_base) & GICR_CTLR_RWP_BIT)
+
+/*
+ * Macro to convert a GICR_TYPER affinity value into a MPIDR value. Bits[31:24]
+ * are zeroes.
+ */
+#define mpidr_from_gicr_typer(typer_val)				 \
+	((((typer_val >> 56) & MPIDR_AFFLVL_MASK) << MPIDR_AFF3_SHIFT) | \
+	 ((typer_val >> 32) & 0xffffff))
+
+/*******************************************************************************
+ * Private function prototypes
+ ******************************************************************************/
+unsigned int gicd_read_igrpmodr(uintptr_t base, unsigned int id);
+unsigned int gicr_read_ipriorityr(uintptr_t base, unsigned int id);
+unsigned int gicd_get_igrpmodr(uintptr_t base, unsigned int id);
+unsigned int gicr_get_igrpmodr0(uintptr_t base, unsigned int id);
+unsigned int gicr_get_igroupr0(uintptr_t base, unsigned int id);
+unsigned int gicv3_get_pending_grp1_interrupt_id(unsigned int pending_grp);
+void gicd_write_igrpmodr(uintptr_t base, unsigned int id, unsigned int val);
+void gicr_write_ipriorityr(uintptr_t base, unsigned int id, unsigned int val);
+void gicd_set_igrpmodr(uintptr_t base, unsigned int id);
+void gicr_set_igrpmodr0(uintptr_t base, unsigned int id);
+void gicr_set_isenabler0(uintptr_t base, unsigned int id);
+void gicr_set_igroupr0(uintptr_t base, unsigned int id);
+void gicd_clr_igrpmodr(uintptr_t base, unsigned int id);
+void gicr_clr_igrpmodr0(uintptr_t base, unsigned int id);
+void gicr_clr_igroupr0(uintptr_t base, unsigned int id);
+void gicv3_spis_configure_defaults(uintptr_t gicd_base);
+void gicv3_ppi_sgi_configure_defaults(uintptr_t gicr_base);
+void gicv3_secure_spis_configure(uintptr_t gicd_base,
+				     unsigned int num_ints,
+				     const unsigned int *sec_intr_list,
+				     unsigned int int_grp);
+void gicv3_secure_ppi_sgi_configure(uintptr_t gicr_base,
+					unsigned int num_ints,
+					const unsigned int *sec_intr_list,
+					unsigned int int_grp);
+void gicv3_rdistif_base_addrs_probe(uintptr_t *rdistif_base_addrs,
+					unsigned int rdistif_num,
+					uintptr_t gicr_base,
+					mpidr_hash_fn mpidr_to_core_pos);
+void gicv3_rdistif_mark_core_awake(uintptr_t gicr_base);
+void gicv3_rdistif_mark_core_asleep(uintptr_t gicr_base);
+
+/*******************************************************************************
+ * GIC Distributor interface accessors
+ ******************************************************************************/
+static inline unsigned int gicd_read_pidr2(uintptr_t base)
+{
+	return mmio_read_32(base + GICD_PIDR2_GICV3);
+}
+
+static inline unsigned long long gicd_read_irouter(uintptr_t base, unsigned int id)
+{
+	return mmio_read_64(base + GICD_IROUTER + (id << 3));
+}
+
+static inline void gicd_write_irouter(uintptr_t base,
+				      unsigned int id,
+				      unsigned long long affinity)
+{
+	mmio_write_64(base + GICD_IROUTER + (id << 3), affinity);
+}
+
+static inline void gicd_clr_ctlr(uintptr_t base,
+				 unsigned int bitmap,
+				 unsigned int rwp)
+{
+	gicd_write_ctlr(base, gicd_read_ctlr(base) & ~bitmap);
+	if (rwp)
+		gicd_wait_for_pending_write(base);
+}
+
+static inline void gicd_set_ctlr(uintptr_t base,
+				 unsigned int bitmap,
+				 unsigned int rwp)
+{
+	gicd_write_ctlr(base, gicd_read_ctlr(base) | bitmap);
+	if (rwp)
+		gicd_wait_for_pending_write(base);
+}
+
+/*******************************************************************************
+ * GIC Redistributor interface accessors
+ ******************************************************************************/
+static inline unsigned long long gicr_read_ctlr(uintptr_t base)
+{
+	return mmio_read_64(base + GICR_CTLR);
+}
+
+static inline unsigned long long gicr_read_typer(uintptr_t base)
+{
+	return mmio_read_64(base + GICR_TYPER);
+}
+
+static inline unsigned int gicr_read_waker(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_WAKER);
+}
+
+static inline void gicr_write_waker(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_WAKER, val);
+}
+
+static inline unsigned int gicr_read_icenabler0(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_ICENABLER0);
+}
+
+static inline void gicr_write_icenabler0(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_ICENABLER0, val);
+}
+
+static inline unsigned int gicr_read_isenabler0(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_ISENABLER0);
+}
+
+static inline void gicr_write_isenabler0(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_ISENABLER0, val);
+}
+
+static inline unsigned int gicr_read_igroupr0(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_IGROUPR0);
+}
+
+static inline void gicr_write_igroupr0(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_IGROUPR0, val);
+}
+
+static inline unsigned int gicr_read_igrpmodr0(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_IGRPMODR0);
+}
+
+static inline void gicr_write_igrpmodr0(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_IGRPMODR0, val);
+}
+
+static inline unsigned int gicr_read_icfgr1(uintptr_t base)
+{
+	return mmio_read_32(base + GICR_ICFGR1);
+}
+
+static inline void gicr_write_icfgr1(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GICR_ICFGR1, val);
+}
+
+#endif /* __GICV3_PRIVATE_H__ */