diff --git a/plat/qemu/sp_min/sp_min-qemu.mk b/plat/qemu/sp_min/sp_min-qemu.mk
new file mode 100644
index 0000000..5e8875b
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min-qemu.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+BL32_SOURCES		+=	plat/qemu/sp_min/sp_min_setup.c		\
+				plat/qemu/aarch32/plat_helpers.S	\
+				plat/qemu/qemu_gic.c 			\
+				plat/qemu/qemu_pm.c			\
+				plat/qemu/topology.c
+
+BL32_SOURCES		+=	lib/cpus/aarch32/aem_generic.S		\
+				lib/cpus/aarch32/cortex_a15.S
+
+BL32_SOURCES		+=	plat/common/aarch32/platform_mp_stack.S \
+				plat/common/plat_psci_common.c
+
+
+BL32_SOURCES		+=	drivers/arm/gic/v2/gicv2_helpers.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/common/gic_common.c
diff --git a/plat/qemu/sp_min/sp_min_setup.c b/plat/qemu/sp_min/sp_min_setup.c
new file mode 100644
index 0000000..fd8fa1c
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min_setup.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <arm_gic.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+#include <xlat_tables.h>
+#include "../qemu_private.h"
+
+#if RESET_TO_SP_MIN
+#error qemu does not support RESET_TO_SP_MIN
+#endif
+
+static entry_point_info_t bl33_image_ep_info;
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL3-1 image.  These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned.  It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_RO_BASE (unsigned long)(&__RO_START__)
+#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
+#define BL32_END (unsigned long)(&__BL32_END__)
+
+#if USE_COHERENT_MEM
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+#endif
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+#define PLATFORM_G1S_PROPS(grp)						\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL)
+
+#define PLATFORM_G0_PROPS(grp)
+
+static const interrupt_prop_t stih410_interrupt_props[] = {
+	PLATFORM_G1S_PROPS(GICV2_INTR_GROUP0),
+	PLATFORM_G0_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const struct gicv2_driver_data plat_gicv2_driver_data = {
+	.gicd_base = GICD_BASE,
+	.gicc_base = GICC_BASE,
+	.interrupt_props = stih410_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(stih410_interrupt_props),
+	.target_masks = target_mask_array,
+	.target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *sp_min_plat_get_bl33_ep_info(void)
+{
+	entry_point_info_t *next_image_info = &bl33_image_ep_info;
+
+	/*
+	 * None of the images on the ARM development platforms can have 0x0
+	 * as the entrypoint
+	 */
+	if (next_image_info->pc)
+		return next_image_info;
+	else
+		return NULL;
+}
+
+void sp_min_early_platform_setup(void *from_bl2, void *plat_params_from_bl2)
+{
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
+			PLAT_QEMU_CONSOLE_BAUDRATE);
+
+	ERROR("qemu sp_min, console init\n");
+	/*
+	 * Check params passed from BL2
+	 */
+	assert(params_from_bl2);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	/*
+	 * Copy BL33 entry point information from BL2's address space.
+	 */
+	while (bl_params) {
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (!bl33_image_ep_info.pc)
+		panic();
+}
+
+void sp_min_plat_arch_setup(void)
+{
+	qemu_configure_mmu_secure(BL32_RO_BASE, BL32_END - BL32_RO_BASE,
+				  BL32_RO_BASE, BL32_RO_LIMIT,
+				  BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
+
+}
+
+void sp_min_platform_setup(void)
+{
+	/* Initialize the gic cpu and distributor interfaces */
+	gicv2_driver_init(&plat_gicv2_driver_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+void sp_min_plat_fiq_handler(uint32_t id)
+{
+	VERBOSE("[sp_min] interrupt #%d\n", id);
+}