diff --git a/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk b/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
new file mode 100644
index 0000000..e56fbf1
--- /dev/null
+++ b/plat/nxp/soc-lx2160a/lx2160ardb/platform.mk
@@ -0,0 +1,91 @@
+#
+# Copyright 2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+
+BOOT_MODE	?= 	flexspi_nor
+BOARD		?=	lx2160ardb
+POVDD_ENABLE	:=	no
+NXP_COINED_BB	:=	no
+
+ # DDR Compilation Configs
+NUM_OF_DDRC	:=	2
+DDRC_NUM_DIMM	:=	2
+DDRC_NUM_CS	:=	4
+DDR_ECC_EN	:=	yes
+ #enable address decoding feature
+DDR_ADDR_DEC	:=	yes
+APPLY_MAX_CDD	:=	yes
+
+# DDR Errata
+ERRATA_DDR_A011396	:= 1
+ERRATA_DDR_A050450	:= 1
+
+ # On-Board Flash Details
+FLASH_TYPE	:=	MT35XU512A
+XSPI_FLASH_SZ	:=	0x10000000
+NXP_XSPI_NOR_UNIT_SIZE		:=	0x20000
+BL2_BIN_XSPI_NOR_END_ADDRESS	:=	0x100000
+# CONFIG_FSPI_ERASE_4K is required to erase 4K sector sizes. This
+# config is enabled for future use cases.
+FSPI_ERASE_4K	:= 0
+
+ # Platform specific features.
+WARM_BOOT	:=	no
+
+ # Adding platform specific defines
+
+$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
+
+ifeq (${POVDD_ENABLE},yes)
+$(eval $(call add_define,CONFIG_POVDD_ENABLE))
+endif
+
+ifneq (${FLASH_TYPE},)
+$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
+endif
+
+ifneq (${XSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
+endif
+
+ifneq (${FSPI_ERASE_4K},)
+$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
+endif
+
+ifneq (${NUM_OF_DDRC},)
+$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
+endif
+
+ifneq (${DDRC_NUM_DIMM},)
+$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
+endif
+
+ifneq (${DDRC_NUM_CS},)
+$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
+endif
+
+ifeq (${DDR_ADDR_DEC},yes)
+$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
+endif
+
+ifeq (${DDR_ECC_EN},yes)
+$(eval $(call add_define,CONFIG_DDR_ECC_EN))
+endif
+
+# Platform can control the base address for non-volatile storage.
+#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
+
+ifeq (${WARM_BOOT},yes)
+$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
+endif
+
+ # Adding Platform files build files
+BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c\
+			${BOARD_PATH}/platform.c
+
+ # Adding SoC build info
+include plat/nxp/soc-lx2160a/soc.mk