diff --git a/plat/nxp/soc-lx2160a/lx2160ardb/ddr_init.c b/plat/nxp/soc-lx2160a/lx2160ardb/ddr_init.c
new file mode 100644
index 0000000..8669b1d
--- /dev/null
+++ b/plat/nxp/soc-lx2160a/lx2160ardb/ddr_init.c
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <lib/utils.h>
+#include <load_img.h>
+
+#include "plat_common.h"
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+const struct ddr_cfg_regs static_1600 = {
+	.cs[0].config = U(0xA8050322),
+	.cs[1].config = U(0x80000322),
+	.cs[0].bnds = U(0x3FF),
+	.cs[1].bnds = U(0x3FF),
+	.sdram_cfg[0] = U(0xE5044000),
+	.sdram_cfg[1] = U(0x401011),
+	.timing_cfg[0] = U(0xFF550018),
+	.timing_cfg[1] = U(0xBAB48C42),
+	.timing_cfg[2] = U(0x48C111),
+	.timing_cfg[3] = U(0x10C1000),
+	.timing_cfg[4] = U(0x2),
+	.timing_cfg[5] = U(0x3401400),
+	.timing_cfg[7] = U(0x13300000),
+	.timing_cfg[8] = U(0x2114600),
+	.sdram_mode[0] = U(0x6010210),
+	.sdram_mode[8] = U(0x500),
+	.sdram_mode[9] = U(0x4240000),
+	.interval = U(0x18600000),
+	.data_init = U(0xDEADBEEF),
+	.zq_cntl = U(0x8A090705),
+};
+
+const struct dimm_params static_dimm = {
+	.rdimm = U(0),
+	.primary_sdram_width = U(64),
+	.ec_sdram_width = U(8),
+	.n_ranks = U(2),
+	.device_width = U(8),
+	.mirrored_dimm = U(1),
+};
+
+/* Sample code using two UDIMM MT18ASF1G72AZ-2G6B1, on each DDR controller */
+unsigned long long board_static_ddr(struct ddr_info *priv)
+{
+	memcpy(&priv->ddr_reg, &static_1600, sizeof(static_1600));
+	memcpy(&priv->dimm, &static_dimm, sizeof(static_dimm));
+	priv->conf.cs_on_dimm[0] = 0x3;
+	ddr_board_options(priv);
+	compute_ddr_phy(priv);
+
+	return ULL(0x400000000);
+}
+
+#elif defined(CONFIG_DDR_NODIMM)
+/*
+ * Sample code to bypass reading SPD. This is a sample, not recommended
+ * for boards with slots. DDR model number: UDIMM MT18ASF1G72AZ-2G6B1.
+ */
+
+const struct dimm_params ddr_raw_timing = {
+	.n_ranks = U(2),
+	.rank_density = U(4294967296u),
+	.capacity = U(8589934592u),
+	.primary_sdram_width = U(64),
+	.ec_sdram_width = U(8),
+	.device_width = U(8),
+	.die_density = U(0x4),
+	.rdimm = U(0),
+	.mirrored_dimm = U(1),
+	.n_row_addr = U(15),
+	.n_col_addr = U(10),
+	.bank_addr_bits = U(0),
+	.bank_group_bits = U(2),
+	.edc_config = U(2),
+	.burst_lengths_bitmask = U(0x0c),
+	.tckmin_x_ps = 750,
+	.tckmax_ps = 1600,
+	.caslat_x = U(0x00FFFC00),
+	.taa_ps = 13750,
+	.trcd_ps = 13750,
+	.trp_ps = 13750,
+	.tras_ps = 32000,
+	.trc_ps = 457500,
+	.twr_ps = 15000,
+	.trfc1_ps = 260000,
+	.trfc2_ps = 160000,
+	.trfc4_ps = 110000,
+	.tfaw_ps = 21000,
+	.trrds_ps = 3000,
+	.trrdl_ps = 4900,
+	.tccdl_ps = 5000,
+	.refresh_rate_ps = U(7800000),
+};
+
+int ddr_get_ddr_params(struct dimm_params *pdimm,
+			    struct ddr_conf *conf)
+{
+	static const char dimm_model[] = "Fixed DDR on board";
+
+	conf->dimm_in_use[0] = 1;	/* Modify accordingly */
+	memcpy(pdimm, &ddr_raw_timing, sizeof(struct dimm_params));
+	memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+
+	/* valid DIMM mask, change accordingly, together with dimm_on_ctlr. */
+	return 0x5;
+}
+#endif	/* CONFIG_DDR_NODIMM */
+
+int ddr_board_options(struct ddr_info *priv)
+{
+	struct memctl_opt *popts = &priv->opt;
+	const struct ddr_conf *conf = &priv->conf;
+
+	popts->vref_dimm = U(0x24);		/* range 1, 83.4% */
+	popts->rtt_override = 0;
+	popts->rtt_park = U(240);
+	popts->otf_burst_chop_en = 0;
+	popts->burst_length = U(DDR_BL8);
+	popts->trwt_override = U(1);
+	popts->bstopre = U(0);			/* auto precharge */
+	popts->addr_hash = 1;
+
+	/* Set ODT impedance on PHY side */
+	switch (conf->cs_on_dimm[1]) {
+	case 0xc:	/* Two slots dual rank */
+	case 0x4:	/* Two slots single rank, not valid for interleaving */
+		popts->trwt = U(0xf);
+		popts->twrt = U(0x7);
+		popts->trrt = U(0x7);
+		popts->twwt = U(0x7);
+		popts->vref_phy = U(0x6B);	/* 83.6% */
+		popts->odt = U(60);
+		popts->phy_tx_impedance = U(28);
+		break;
+	case 0:		/* One slot used */
+	default:
+		popts->trwt = U(0x3);
+		popts->twrt = U(0x3);
+		popts->trrt = U(0x3);
+		popts->twwt = U(0x3);
+		popts->vref_phy = U(0x60);	/* 75% */
+		popts->odt = U(48);
+		popts->phy_tx_impedance = U(28);
+		break;
+	}
+
+	return 0;
+}
+
+long long init_ddr(void)
+{
+	int spd_addr[] = { 0x51, 0x52, 0x53, 0x54 };
+	struct ddr_info info;
+	struct sysinfo sys;
+	long long dram_size;
+
+	zeromem(&sys, sizeof(sys));
+	if (get_clocks(&sys) != 0) {
+		ERROR("System clocks are not set\n");
+		panic();
+	}
+	debug("platform clock %lu\n", sys.freq_platform);
+	debug("DDR PLL1 %lu\n", sys.freq_ddr_pll0);
+	debug("DDR PLL2 %lu\n", sys.freq_ddr_pll1);
+
+	zeromem(&info, sizeof(info));
+
+	/* Set two DDRC. Unused DDRC will be removed automatically. */
+	info.num_ctlrs = NUM_OF_DDRC;
+	info.spd_addr = spd_addr;
+	info.ddr[0] = (void *)NXP_DDR_ADDR;
+	info.ddr[1] = (void *)NXP_DDR2_ADDR;
+	info.phy[0] = (void *)NXP_DDR_PHY1_ADDR;
+	info.phy[1] = (void *)NXP_DDR_PHY2_ADDR;
+	info.clk = get_ddr_freq(&sys, 0);
+	info.img_loadr = load_img;
+	info.phy_gen2_fw_img_buf = PHY_GEN2_FW_IMAGE_BUFFER;
+	if (info.clk == 0) {
+		info.clk = get_ddr_freq(&sys, 1);
+	}
+	info.dimm_on_ctlr = DDRC_NUM_DIMM;
+
+	info.warm_boot_flag = DDR_WRM_BOOT_NT_SUPPORTED;
+
+	dram_size = dram_init(&info
+#if defined(NXP_HAS_CCN504) || defined(NXP_HAS_CCN508)
+		    , NXP_CCN_HN_F_0_ADDR
+#endif
+		    );
+
+
+	if (dram_size < 0) {
+		ERROR("DDR init failed.\n");
+	}
+
+	return dram_size;
+}