diff --git a/docs/threat_model/index.rst b/docs/threat_model/index.rst
index b5ede69..335937e 100644
--- a/docs/threat_model/index.rst
+++ b/docs/threat_model/index.rst
@@ -15,6 +15,7 @@
 
    threat_model
    threat_model_spm
+   threat_model_fvp_r
 
 --------------
 
diff --git a/docs/threat_model/threat_model.rst b/docs/threat_model/threat_model.rst
index 4a31e79..072babc 100644
--- a/docs/threat_model/threat_model.rst
+++ b/docs/threat_model/threat_model.rst
@@ -1,4 +1,4 @@
-Generic threat model
+Generic Threat Model
 ********************
 
 ************************
diff --git a/docs/threat_model/threat_model_fvp_r.rst b/docs/threat_model/threat_model_fvp_r.rst
new file mode 100644
index 0000000..c1462bb
--- /dev/null
+++ b/docs/threat_model/threat_model_fvp_r.rst
@@ -0,0 +1,97 @@
+fvp_r-Platform Threat Model
+***************************
+
+************************
+Introduction
+************************
+This document provides a threat model for TF-A fvp_r platform.
+
+************************
+Target of Evaluation
+************************
+In this threat model, the target of evaluation is the fvp_r platform of Trusted
+Firmware for A-class Processors (TF-A).  The fvp_r platform provides limited
+support of AArch64 R-class Processors (v8-R64).
+
+This is a delta document, only pointing out differences from the general TF-A
+threat-model document, :ref:`Generic Threat Model`
+
+BL1 Only
+========
+The most fundamental difference between the threat model for the current fvp_r
+implementation compared to the general TF-A threat model, is that fvp_r is
+currently limited to BL1 only.  Any threats from the general TF-A threat model
+unrelated to BL1 are therefore not relevant to the fvp_r implementation.
+
+The fvp_r BL1 implementation directly loads a customer/partner-defined runtime
+system.  The threat model for that runtime system, being partner-defined, is
+out-of-scope for this threat-model.
+
+Relatedly, all exceptions, synchronous and asynchronous, are disabled during BL1
+execution.  So, any references to exceptions are not relevant.
+
+EL3 is Unsupported and All Secure
+=================================
+v8-R64 cores do not support EL3, and (essentially) all operation is defined as
+Secure-mode.  Therefore:
+
+    - Any threats regarding NS operation are not relevant.
+
+    - Any mentions of SMCs are also not relevant.
+
+    - Anything otherwise-relevant code running in EL3 is instead run in EL2.
+
+MPU instead of MMU
+==================
+v8-R64 cores, running in EL2, use an MPU for memory management, rather than an
+MMU.  The MPU in the fvp_r implementation is configured to function effectively
+identically with the MMU for the usual BL1 implementation.  There are
+memory-map differences, but the MPU configuration is functionally equivalent.
+
+No AArch32 Support
+==================
+Another substantial difference between v8-A and v8-R64 cores is that v8-R64 does
+not support AArch32.  However, this is not believed to have any threat-modeling
+ramifications.
+
+
+Threat Assessment
+=================
+For this section, please reference the Threat Assessment under the general TF-A
+threat-model document, :ref:`Generic Threat Model`
+
+The following threats from that document are still relevant to the fvp_r
+implementation:
+
+    - ID 01:  An attacker can mangle firmware images to execute arbitrary code.
+
+    - ID 03:  An attacker can use Time-of-Check-Time-of-Use (TOCTOU) attack to
+      bypass image authentication during the boot process.
+
+    - ID 04:  An attacker with physical access can execute arbitrary image by
+      bypassing the signature verification stage using clock- or power-glitching
+      techniques.
+
+    - ID 05:  Information leak via UART logs such as crashes
+
+    - ID 06:  An attacker can read sensitive data and execute arbitrary code
+      through the external debug and trace interface.
+
+    - ID 08:  Memory corruption due to memory overflows and lack of boundary
+      checking when accessing resources could allow an attacker to execute 
+      arbitrary code, modify some state variable to change the normal flow of
+      the program, or leak sensitive.
+
+    - ID 11:  Misconfiguration of the Memory Protection Unit (MPU) may allow
+      normal world software to access sensitive data or execute arbitrary code.
+      Arguably, MPUs having fewer memory regions, there may be a temptation to
+      share memory regions, making this a greater threat.  However, since the
+      fvp_r implementation is limited to BL1, since BL1's regions are fixed,
+      and since the MPU configuration is equivalent with that for the fvp
+      platform and others, this is not expected to be a concern.
+
+
+
+--------------
+
+*Copyright (c) 2021, Arm Limited. All rights reserved.*
diff --git a/docs/threat_model/threat_model_spm.rst b/docs/threat_model/threat_model_spm.rst
index 4db4c66..a7bc2a9 100644
--- a/docs/threat_model/threat_model_spm.rst
+++ b/docs/threat_model/threat_model_spm.rst
@@ -1,4 +1,4 @@
-SPMC threat model
+SPMC Threat Model
 *****************
 
 ************************