Merge pull request #1543 from Yann-lms/drivers_st
maintainers: add drivers folders for STM32MP1
diff --git a/include/plat/marvell/a8k/common/plat_marvell.h b/include/plat/marvell/a8k/common/plat_marvell.h
index aad5da7..81cbf38 100644
--- a/include/plat/marvell/a8k/common/plat_marvell.h
+++ b/include/plat/marvell/a8k/common/plat_marvell.h
@@ -67,8 +67,10 @@
uint32_t marvell_get_spsr_for_bl33_entry(void);
/* BL31 utility functions */
-void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
- void *plat_params_from_bl2);
+void marvell_bl31_early_platform_setup(struct bl31_params *from_bl2,
+ uintptr_t soc_fw_config,
+ uintptr_t hw_config,
+ void *plat_params_from_bl2);
void marvell_bl31_platform_setup(void);
void marvell_bl31_plat_runtime_setup(void);
void marvell_bl31_plat_arch_setup(void);
diff --git a/lib/cpus/aarch64/dsu_helpers.S b/lib/cpus/aarch64/dsu_helpers.S
index 293ed24..152a3da 100644
--- a/lib/cpus/aarch64/dsu_helpers.S
+++ b/lib/cpus/aarch64/dsu_helpers.S
@@ -8,15 +8,19 @@
#include <dsu_def.h>
#include <errata_report.h>
-/*
- * DSU erratum 936184
- * Check the DSU variant, revision and configuration to determine if the
- * erratum applies. This erratum was fixed in r2p0.
+/* -----------------------------------------------------------------------
+ * DSU erratum 936184 check function
+ * Checks the DSU variant, revision and configuration to determine if
+ * the erratum applies. Erratum applies if ACP interface is present
+ * in the DSU and revision-variant < r2p0.
+ *
+ * The erratum was fixed in r2p0.
*
* This function is called from both assembly and C environment. So it
* follows AAPCS.
*
* Clobbers: x0-x3
+ * -----------------------------------------------------------------------
*/
.globl check_errata_dsu_936184
.globl errata_dsu_936184_wa
@@ -25,7 +29,7 @@
mov x2, #ERRATA_NOT_APPLIES
mov x3, #ERRATA_APPLIES
- /* Erratum applies only if ACP interface is present in DSU */
+ /* Erratum applies only if DSU has the ACP interface */
mov x0, x2
mrs x1, CLUSTERCFR_EL1
ubfx x1, x1, #CLUSTERCFR_ACP_SHIFT, #1
@@ -44,8 +48,14 @@
ret
endfunc check_errata_dsu_936184
+/* --------------------------------------------------
+ * Errata Workaround for DSU erratum #936184.
+ *
+ * Can clobber only: x0-x17
+ * --------------------------------------------------
+ */
func errata_dsu_936184_wa
- mov x20, x30
+ mov x17, x30
bl check_errata_dsu_936184
cbz x0, 1f
@@ -56,5 +66,5 @@
msr CLUSTERACTLR_EL1, x0
isb
1:
- ret x20
+ ret x17
endfunc errata_dsu_936184_wa
diff --git a/plat/arm/common/arm_dyn_cfg.c b/plat/arm/common/arm_dyn_cfg.c
index 118bd26..b9c73f0 100644
--- a/plat/arm/common/arm_dyn_cfg.c
+++ b/plat/arm/common/arm_dyn_cfg.c
@@ -110,7 +110,7 @@
return;
}
- err = arm_dyn_tb_fw_cfg_init((void *)tb_fw_cfg_dtb, &tb_fw_node);
+ err = arm_dyn_tb_fw_cfg_init(tb_fw_cfg_dtb, &tb_fw_node);
if (err < 0) {
ERROR("Invalid TB_FW_CONFIG passed from BL1\n");
panic();
@@ -125,7 +125,7 @@
continue;
}
- err = arm_dyn_get_config_load_info((void *)tb_fw_cfg_dtb, tb_fw_node,
+ err = arm_dyn_get_config_load_info(tb_fw_cfg_dtb, tb_fw_node,
config_ids[i], &image_base, &image_size);
if (err < 0) {
VERBOSE("Couldn't find config_id %d load info in TB_FW_CONFIG\n",
@@ -171,7 +171,7 @@
#if TRUSTED_BOARD_BOOT && defined(DYN_DISABLE_AUTH)
uint32_t disable_auth = 0;
- err = arm_dyn_get_disable_auth((void *)tb_fw_cfg_dtb, tb_fw_node,
+ err = arm_dyn_get_disable_auth(tb_fw_cfg_dtb, tb_fw_node,
&disable_auth);
if (err < 0)
return;
diff --git a/plat/marvell/common/marvell_bl31_setup.c b/plat/marvell/common/marvell_bl31_setup.c
index a74816b..f381876 100644
--- a/plat/marvell/common/marvell_bl31_setup.c
+++ b/plat/marvell/common/marvell_bl31_setup.c
@@ -35,7 +35,7 @@
static entry_point_info_t bl33_image_ep_info;
/* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl31_early_platform_setup
+#pragma weak bl31_early_platform_setup2
#pragma weak bl31_platform_setup
#pragma weak bl31_plat_arch_setup
#pragma weak bl31_plat_get_next_image_ep_info
@@ -69,7 +69,9 @@
*****************************************************************************
*/
void marvell_bl31_early_platform_setup(bl31_params_t *from_bl2,
- void *plat_params_from_bl2)
+ uintptr_t soc_fw_config,
+ uintptr_t hw_config,
+ void *plat_params_from_bl2)
{
/* Initialize the console to provide early debug support */
console_init(PLAT_MARVELL_BOOT_UART_BASE,
@@ -130,10 +132,12 @@
#endif
}
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
- void *plat_params_from_bl2)
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+
{
- marvell_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+ marvell_bl31_early_platform_setup((void *)arg0, arg1, arg2,
+ (void *)arg3);
#ifdef USE_CCI
/*