feat(arm_fpga): add kernel trampoline
The arm64 Linux kernel needed to be loaded at a certain offset within any
2MB aligned region; this value was configured at compile time and stored
in the Linux kernel image header. The default value was always 512KiB,
so this is the value we use in the TF-A build system for the kernel
load address.
However the whole scheme around the TEXT_OFFSET changed in Linux v5.8:
Linux kernels became fully relocatable, so this value is largely ignored
now, and its default value changed to 0. The only remainder is a warning
message at boot time in case there is a mismatch:
[Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
To avoid this warning, and to make TF-A Linux kernel boot protocol
compliant, we should load newer kernels to offset 0 of a 2 MB
region. This can be done by the user at FPGA boot time, but BL31 needs
to know about this address. As we can't change the build default to 0
without breaking older kernels, we should try to make a build dealing
with both versions:
This patch introduces a small trampoline code, which gets loaded at
512KB of DRAM, and branches up to 2MB. If users load their newer
kernels at 2MB, this trampoline will cover them. In case an older kernel
is loaded at 512KB, it will overwrite this trampoline code, so it would
still work.
Change-Id: If49ca86f5dca380036caf2555349748722901277
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
3 files changed