diff --git a/include/plat/common/common_def.h b/include/plat/common/common_def.h
index e2c4513..65f31e7 100644
--- a/include/plat/common/common_def.h
+++ b/include/plat/common/common_def.h
@@ -119,22 +119,32 @@
  */
 #if SEPARATE_CODE_AND_RODATA
 #define BL_CODE_BASE		(unsigned long)(&__TEXT_START__)
-#define BL_CODE_LIMIT		(unsigned long)(&__TEXT_END__)
+#define BL_CODE_END		(unsigned long)(&__TEXT_END__)
 #define BL_RO_DATA_BASE		(unsigned long)(&__RODATA_START__)
-#define BL_RO_DATA_LIMIT	(unsigned long)(&__RODATA_END__)
+#define BL_RO_DATA_END		(unsigned long)(&__RODATA_END__)
 
-#define BL1_CODE_LIMIT		BL_CODE_LIMIT
+#define BL1_CODE_END		BL_CODE_END
 #define BL1_RO_DATA_BASE	(unsigned long)(&__RODATA_START__)
-#define BL1_RO_DATA_LIMIT	round_up(BL1_ROM_END, PAGE_SIZE)
+#define BL1_RO_DATA_END		round_up(BL1_ROM_END, PAGE_SIZE)
 #else
 #define BL_CODE_BASE		(unsigned long)(&__RO_START__)
-#define BL_CODE_LIMIT		(unsigned long)(&__RO_END__)
+#define BL_CODE_END		(unsigned long)(&__RO_END__)
 #define BL_RO_DATA_BASE		0
-#define BL_RO_DATA_LIMIT	0
+#define BL_RO_DATA_END		0
 
-#define BL1_CODE_LIMIT		round_up(BL1_ROM_END, PAGE_SIZE)
+#define BL1_CODE_END		round_up(BL1_ROM_END, PAGE_SIZE)
 #define BL1_RO_DATA_BASE	0
-#define BL1_RO_DATA_LIMIT	0
+#define BL1_RO_DATA_END		0
 #endif /* SEPARATE_CODE_AND_RODATA */
 
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
+ * page-aligned addresses.
+ */
+#define BL_COHERENT_RAM_BASE	(unsigned long)(&__COHERENT_RAM_START__)
+#define BL_COHERENT_RAM_END	(unsigned long)(&__COHERENT_RAM_END__)
+
 #endif /* __COMMON_DEF_H__ */
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index 50d102a..81a87c4 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -39,20 +39,6 @@
 #include <xlat_tables.h>
 #include "../../../bl1/bl1_private.h"
 
-
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-
 /* Weak definitions may be overridden in specific ARM standard platform */
 #pragma weak bl1_early_platform_setup
 #pragma weak bl1_plat_arch_setup
@@ -124,12 +110,12 @@
 	arm_setup_page_tables(bl1_tzram_layout.total_base,
 			      bl1_tzram_layout.total_size,
 			      BL_CODE_BASE,
-			      BL1_CODE_LIMIT,
+			      BL1_CODE_END,
 			      BL1_RO_DATA_BASE,
-			      BL1_RO_DATA_LIMIT
+			      BL1_RO_DATA_END
 #if USE_COHERENT_MEM
-			      , BL1_COHERENT_RAM_BASE,
-			      BL1_COHERENT_RAM_LIMIT
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 			     );
 #ifdef AARCH32
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index a4fac0d..5f30708 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -39,18 +39,6 @@
 #include <platform_def.h>
 #include <string.h>
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
 /* Data structure which holds the extents of the trusted SRAM for BL2 */
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
 
@@ -238,12 +226,12 @@
 	arm_setup_page_tables(bl2_tzram_layout.total_base,
 			      bl2_tzram_layout.total_size,
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT
+			      BL_RO_DATA_END
 #if USE_COHERENT_MEM
-			      , BL2_COHERENT_RAM_BASE,
-			      BL2_COHERENT_RAM_LIMIT
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 			      );
 
diff --git a/plat/arm/common/arm_bl2u_setup.c b/plat/arm/common/arm_bl2u_setup.c
index de7d0c2..86317f6 100644
--- a/plat/arm/common/arm_bl2u_setup.c
+++ b/plat/arm/common/arm_bl2u_setup.c
@@ -36,18 +36,6 @@
 #include <plat_arm.h>
 #include <string.h>
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2U_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2U_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
 /* Weak definitions may be overridden in specific ARM standard platform */
 #pragma weak bl2u_platform_setup
 #pragma weak bl2u_early_platform_setup
@@ -95,13 +83,13 @@
 	arm_setup_page_tables(BL2U_BASE,
 			      BL31_LIMIT,
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT
+			      BL_RO_DATA_END
 #if USE_COHERENT_MEM
 			      ,
-			      BL2U_COHERENT_RAM_BASE,
-			      BL2U_COHERENT_RAM_LIMIT
+			      BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 		);
 	enable_mmu_el1(0);
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index bc1ec11..d20d8cd 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -41,18 +41,6 @@
 
 #define BL31_END (uintptr_t)(&__BL31_END__)
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (uintptr_t)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (uintptr_t)(&__COHERENT_RAM_END__)
-#endif
-
 /*
  * Placeholder variables for copying the arguments that have been passed to
  * BL31 from BL2.
@@ -288,12 +276,12 @@
 	arm_setup_page_tables(BL31_BASE,
 			      BL31_END - BL31_BASE,
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT
+			      BL_RO_DATA_END
 #if USE_COHERENT_MEM
-			      , BL31_COHERENT_RAM_BASE,
-			      BL31_COHERENT_RAM_LIMIT
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 			      );
 	enable_mmu_el3(0);
diff --git a/plat/arm/common/sp_min/arm_sp_min_setup.c b/plat/arm/common/sp_min/arm_sp_min_setup.c
index d48556e..a472ceb 100644
--- a/plat/arm/common/sp_min/arm_sp_min_setup.c
+++ b/plat/arm/common/sp_min/arm_sp_min_setup.c
@@ -39,19 +39,6 @@
 
 #define BL32_END (uintptr_t)(&__BL32_END__)
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL32_COHERENT_RAM_BASE (uintptr_t)(&__COHERENT_RAM_START__)
-#define BL32_COHERENT_RAM_LIMIT (uintptr_t)(&__COHERENT_RAM_END__)
-#endif
-
-
 static entry_point_info_t bl33_image_ep_info;
 
 /* Weak definitions may be overridden in specific ARM standard platform */
@@ -202,12 +189,12 @@
 	arm_setup_page_tables(BL32_BASE,
 			      (BL32_END - BL32_BASE),
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT
+			      BL_RO_DATA_END
 #if USE_COHERENT_MEM
-			      , BL32_COHERENT_RAM_BASE,
-			      BL32_COHERENT_RAM_LIMIT
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 			      );
 
diff --git a/plat/arm/common/tsp/arm_tsp_setup.c b/plat/arm/common/tsp/arm_tsp_setup.c
index 09029f4..20533ac 100644
--- a/plat/arm/common/tsp/arm_tsp_setup.c
+++ b/plat/arm/common/tsp/arm_tsp_setup.c
@@ -37,19 +37,6 @@
 
 #define BL32_END (unsigned long)(&__BL32_END__)
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
-
 /* Weak definitions may be overridden in specific ARM standard platform */
 #pragma weak tsp_early_platform_setup
 #pragma weak tsp_platform_setup
@@ -91,12 +78,12 @@
 	arm_setup_page_tables(BL32_BASE,
 			      (BL32_END - BL32_BASE),
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT
+			      BL_RO_DATA_END
 #if USE_COHERENT_MEM
-			      , BL32_COHERENT_RAM_BASE,
-			      BL32_COHERENT_RAM_LIMIT
+			      , BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 #endif
 			      );
 	enable_mmu_el1(0);
diff --git a/plat/mediatek/mt6795/bl31_plat_setup.c b/plat/mediatek/mt6795/bl31_plat_setup.c
index 3a8612d..af0858f 100644
--- a/plat/mediatek/mt6795/bl31_plat_setup.c
+++ b/plat/mediatek/mt6795/bl31_plat_setup.c
@@ -32,6 +32,7 @@
 #include <arch_helpers.h>
 #include <bl_common.h>
 #include <cci.h>
+#include <common_def.h>
 #include <console.h>
 #include <context_mgmt.h>
 #include <debug.h>
@@ -52,9 +53,6 @@
 unsigned long __RO_START__;
 unsigned long __RO_END__;
 
-unsigned long __COHERENT_RAM_START__;
-unsigned long __COHERENT_RAM_END__;
-
 /*
  * The next 2 constants identify the extents of the code & RO data region.
  * These addresses are used by the MMU setup code and therefore they must be
@@ -65,16 +63,6 @@
 #define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
 
 /*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
-/*
  * Placeholder variables for copying the arguments that have been passed to
  * BL3-1 from BL2.
  */
@@ -323,8 +311,8 @@
 		(TZRAM_SIZE & ~(PAGE_SIZE_MASK)),
 		(BL31_RO_BASE & ~(PAGE_SIZE_MASK)),
 		BL31_RO_LIMIT,
-		BL31_COHERENT_RAM_BASE,
-		BL31_COHERENT_RAM_LIMIT);
+		BL_COHERENT_RAM_BASE,
+		BL_COHERENT_RAM_END);
 	/* Initialize for ATF log buffer */
 	if (gteearg.atf_log_buf_size != 0) {
 		gteearg.atf_aee_debug_buf_size = ATF_AEE_BUFFER_SIZE;
diff --git a/plat/mediatek/mt8173/bl31_plat_setup.c b/plat/mediatek/mt8173/bl31_plat_setup.c
index 4626f81..ef18d07 100644
--- a/plat/mediatek/mt8173/bl31_plat_setup.c
+++ b/plat/mediatek/mt8173/bl31_plat_setup.c
@@ -30,6 +30,7 @@
 #include <arm_gic.h>
 #include <assert.h>
 #include <bl_common.h>
+#include <common_def.h>
 #include <console.h>
 #include <debug.h>
 #include <generic_delay_timer.h>
@@ -47,9 +48,6 @@
 unsigned long __RO_START__;
 unsigned long __RO_END__;
 
-unsigned long __COHERENT_RAM_START__;
-unsigned long __COHERENT_RAM_END__;
-
 /*
  * The next 3 constants identify the extents of the code, RO data region and the
  * limit of the BL31 image.  These addresses are used by the MMU setup code and
@@ -61,16 +59,6 @@
 #define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
 #define BL31_END (unsigned long)(&__BL31_END__)
 
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 static entry_point_info_t bl32_ep_info;
 static entry_point_info_t bl33_ep_info;
 
@@ -191,10 +179,10 @@
 	plat_cci_enable();
 
 	plat_configure_mmu_el3(BL31_RO_BASE,
-			       (BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
+			       BL_COHERENT_RAM_END - BL31_RO_BASE,
 			       BL31_RO_BASE,
 			       BL31_RO_LIMIT,
-			       BL31_COHERENT_RAM_BASE,
-			       BL31_COHERENT_RAM_LIMIT);
+			       BL_COHERENT_RAM_BASE,
+			       BL_COHERENT_RAM_END);
 }
 
diff --git a/plat/nvidia/tegra/common/tegra_bl31_setup.c b/plat/nvidia/tegra/common/tegra_bl31_setup.c
index 7e2bebe..0fd7c82 100644
--- a/plat/nvidia/tegra/common/tegra_bl31_setup.c
+++ b/plat/nvidia/tegra/common/tegra_bl31_setup.c
@@ -53,11 +53,6 @@
 extern unsigned long __RO_END__;
 extern unsigned long __BL31_END__;
 
-#if USE_COHERENT_MEM
-extern unsigned long __COHERENT_RAM_START__;
-extern unsigned long __COHERENT_RAM_END__;
-#endif
-
 extern uint64_t tegra_bl31_phys_base;
 
 /*
@@ -71,18 +66,6 @@
 #define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
 #define BL31_END (unsigned long)(&__BL31_END__)
 
-#if USE_COHERENT_MEM
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-#endif
-
 static entry_point_info_t bl33_image_ep_info, bl32_image_ep_info;
 static plat_params_from_bl2_t plat_bl31_params_from_bl2 = {
 	.tzdram_size = (uint64_t)TZDRAM_SIZE
@@ -212,8 +195,8 @@
 			MT_MEMORY | MT_RO | MT_SECURE);
 
 #if USE_COHERENT_MEM
-	coh_start = total_base + (BL31_COHERENT_RAM_BASE - BL31_RO_BASE);
-	coh_size = BL31_COHERENT_RAM_LIMIT - BL31_COHERENT_RAM_BASE;
+	coh_start = total_base + (BL_COHERENT_RAM_BASE - BL31_RO_BASE);
+	coh_size = BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE;
 
 	mmap_add_region(coh_start, coh_start,
 			coh_size,
diff --git a/plat/qemu/include/platform_def.h b/plat/qemu/include/platform_def.h
index d983ce6..1fa2164 100644
--- a/plat/qemu/include/platform_def.h
+++ b/plat/qemu/include/platform_def.h
@@ -175,7 +175,6 @@
 #else
 # error "Unsupported BL32_RAM_LOCATION_ID value"
 #endif
-#define BL32_SIZE			(BL32_LIMIT - BL32_BASE)
 
 #define NS_IMAGE_OFFSET			0x60000000
 
diff --git a/plat/qemu/qemu_bl1_setup.c b/plat/qemu/qemu_bl1_setup.c
index 4438aac..21217d7 100644
--- a/plat/qemu/qemu_bl1_setup.c
+++ b/plat/qemu/qemu_bl1_setup.c
@@ -36,18 +36,6 @@
 #include <platform_def.h>
 #include "qemu_private.h"
 
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL1_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL1_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
-
 /*******************************************************************************
  * Declarations of linker defined symbols which will tell us where BL1 lives
  * in Trusted RAM
@@ -98,7 +86,7 @@
 	qemu_configure_mmu_el3(bl1_tzram_layout.total_base,
 				bl1_tzram_layout.total_size,
 				BL1_RO_BASE, BL1_RO_LIMIT,
-				BL1_COHERENT_RAM_BASE, BL1_COHERENT_RAM_LIMIT);
+				BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
 }
 
 void bl1_platform_setup(void)
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
index 24da2b6..dba3bee 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -46,16 +46,6 @@
 #define BL2_RO_BASE (unsigned long)(&__RO_START__)
 #define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
 
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 /*******************************************************************************
  * This structure represents the superset of information that is passed to
  * BL3-1, e.g. while passing control to it from BL2, bl31_params
@@ -216,7 +206,7 @@
 	qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
 			      bl2_tzram_layout.total_size,
 			      BL2_RO_BASE, BL2_RO_LIMIT,
-			      BL2_COHERENT_RAM_BASE, BL2_COHERENT_RAM_LIMIT);
+			      BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
 }
 
 /*******************************************************************************
diff --git a/plat/qemu/qemu_bl31_setup.c b/plat/qemu/qemu_bl31_setup.c
index 7a48358..547e135 100644
--- a/plat/qemu/qemu_bl31_setup.c
+++ b/plat/qemu/qemu_bl31_setup.c
@@ -47,16 +47,6 @@
 #define BL31_END (unsigned long)(&__BL31_END__)
 
 /*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
-/*
  * Placeholder variables for copying the arguments that have been passed to
  * BL3-1 from BL2.
  */
@@ -105,7 +95,7 @@
 {
 	qemu_configure_mmu_el3(BL31_RO_BASE, (BL31_END - BL31_RO_BASE),
 			      BL31_RO_BASE, BL31_RO_LIMIT,
-			      BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_LIMIT);
+			      BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
 }
 
 static const unsigned int irq_sec_array[] = {
diff --git a/plat/rockchip/common/bl31_plat_setup.c b/plat/rockchip/common/bl31_plat_setup.c
index b073bde..66678d3 100644
--- a/plat/rockchip/common/bl31_plat_setup.c
+++ b/plat/rockchip/common/bl31_plat_setup.c
@@ -46,9 +46,6 @@
 unsigned long __RO_START__;
 unsigned long __RO_END__;
 
-unsigned long __COHERENT_RAM_START__;
-unsigned long __COHERENT_RAM_END__;
-
 /*
  * The next 2 constants identify the extents of the code & RO data region.
  * These addresses are used by the MMU setup code and therefore they must be
@@ -58,16 +55,6 @@
 #define BL31_RO_BASE (unsigned long)(&__RO_START__)
 #define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
 
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 static entry_point_info_t bl32_ep_info;
 static entry_point_info_t bl33_ep_info;
 
@@ -144,9 +131,9 @@
 	plat_cci_init();
 	plat_cci_enable();
 	plat_configure_mmu_el3(BL31_RO_BASE,
-			       (BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
+			       BL_COHERENT_RAM_END - BL31_RO_BASE,
 			       BL31_RO_BASE,
 			       BL31_RO_LIMIT,
-			       BL31_COHERENT_RAM_BASE,
-			       BL31_COHERENT_RAM_LIMIT);
+			       BL_COHERENT_RAM_BASE,
+			       BL_COHERENT_RAM_END);
 }
diff --git a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
index c05b094..c70fc3e 100644
--- a/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
+++ b/plat/xilinx/zynqmp/bl31_zynqmp_setup.c
@@ -40,16 +40,6 @@
 
 #define BL31_END (unsigned long)(&__BL31_END__)
 
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
- * refer to page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 static entry_point_info_t bl32_image_ep_info;
 static entry_point_info_t bl33_image_ep_info;
 
@@ -160,10 +150,10 @@
 	arm_setup_page_tables(BL31_BASE,
 			      BL31_END - BL31_BASE,
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT,
-			      BL31_COHERENT_RAM_BASE,
-			      BL31_COHERENT_RAM_LIMIT);
+			      BL_RO_DATA_END,
+			      BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END);
 	enable_mmu_el3(0);
 }
diff --git a/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c b/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
index 8e3ca62..6feb5b9 100644
--- a/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
+++ b/plat/xilinx/zynqmp/tsp/tsp_plat_setup.c
@@ -37,16 +37,6 @@
 
 #define BL32_END (unsigned long)(&__BL32_END__)
 
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 /*******************************************************************************
  * Initialize the UART
  ******************************************************************************/
@@ -81,11 +71,11 @@
 	arm_setup_page_tables(BL32_BASE,
 			      BL32_END - BL32_BASE,
 			      BL_CODE_BASE,
-			      BL_CODE_LIMIT,
+			      BL_CODE_END,
 			      BL_RO_DATA_BASE,
-			      BL_RO_DATA_LIMIT,
-			      BL32_COHERENT_RAM_BASE,
-			      BL32_COHERENT_RAM_LIMIT
+			      BL_RO_DATA_END,
+			      BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END
 			      );
 	enable_mmu_el1(0);
 }