/*
 * Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef GICV3_H
#define GICV3_H

/*******************************************************************************
 * GICv3 and 3.1 miscellaneous definitions
 ******************************************************************************/
/* Interrupt group definitions */
#define INTR_GROUP1S		U(0)
#define INTR_GROUP0		U(1)
#define INTR_GROUP1NS		U(2)

/* Interrupt IDs reported by the HPPIR and IAR registers */
#define PENDING_G1S_INTID	U(1020)
#define PENDING_G1NS_INTID	U(1021)

/* Constant to categorize LPI interrupt */
#define MIN_LPI_ID		U(8192)

/* GICv3 can only target up to 16 PEs with SGI */
#define GICV3_MAX_SGI_TARGETS	U(16)

/* PPIs INTIDs 16-31 */
#define MAX_PPI_ID		U(31)

#if GIC_EXT_INTID

/* GICv3.1 extended PPIs INTIDs 1056-1119 */
#define MIN_EPPI_ID		U(1056)
#define MAX_EPPI_ID		U(1119)

/* Total number of GICv3.1 EPPIs */
#define TOTAL_EPPI_INTR_NUM	(MAX_EPPI_ID - MIN_EPPI_ID + U(1))

/* Total number of GICv3.1 PPIs and EPPIs */
#define TOTAL_PRIVATE_INTR_NUM	(TOTAL_PCPU_INTR_NUM + TOTAL_EPPI_INTR_NUM)

/* GICv3.1 extended SPIs INTIDs 4096 - 5119 */
#define MIN_ESPI_ID		U(4096)
#define MAX_ESPI_ID		U(5119)

/* Total number of GICv3.1 ESPIs */
#define TOTAL_ESPI_INTR_NUM	(MAX_ESPI_ID - MIN_ESPI_ID + U(1))

/* Total number of GICv3.1 SPIs and ESPIs */
#define	TOTAL_SHARED_INTR_NUM	(TOTAL_SPI_INTR_NUM + TOTAL_ESPI_INTR_NUM)

/* SGIs: 0-15, PPIs: 16-31, EPPIs: 1056-1119 */
#define	IS_SGI_PPI(id)		(((id) <= MAX_PPI_ID)  || \
				(((id) >= MIN_EPPI_ID) && \
				 ((id) <= MAX_EPPI_ID)))

/* SPIs: 32-1019, ESPIs: 4096-5119 */
#define	IS_SPI(id)		((((id) >= MIN_SPI_ID)  && \
				  ((id) <= MAX_SPI_ID)) || \
				 (((id) >= MIN_ESPI_ID) && \
				  ((id) <= MAX_ESPI_ID)))
#else	/* GICv3 */

/* Total number of GICv3 PPIs */
#define TOTAL_PRIVATE_INTR_NUM	TOTAL_PCPU_INTR_NUM

/* Total number of GICv3 SPIs */
#define	TOTAL_SHARED_INTR_NUM	TOTAL_SPI_INTR_NUM

/* SGIs: 0-15, PPIs: 16-31 */
#define	IS_SGI_PPI(id)		((id) <= MAX_PPI_ID)

/* SPIs: 32-1019 */
#define	IS_SPI(id)		(((id) >= MIN_SPI_ID) && ((id) <= MAX_SPI_ID))

#endif	/* GIC_EXT_INTID */

#define GIC_REV(r, p)           ((r << 4) | p)

/*******************************************************************************
 * GICv3 and 3.1 specific Distributor interface register offsets and constants
 ******************************************************************************/
#define GICD_TYPER2		U(0x0c)
#define GICD_STATUSR		U(0x10)
#define GICD_SETSPI_NSR		U(0x40)
#define GICD_CLRSPI_NSR		U(0x48)
#define GICD_SETSPI_SR		U(0x50)
#define GICD_CLRSPI_SR		U(0x58)
#define GICD_IGRPMODR		U(0xd00)
#define GICD_IGROUPRE		U(0x1000)
#define GICD_ISENABLERE		U(0x1200)
#define GICD_ICENABLERE		U(0x1400)
#define GICD_ISPENDRE		U(0x1600)
#define GICD_ICPENDRE		U(0x1800)
#define GICD_ISACTIVERE		U(0x1a00)
#define GICD_ICACTIVERE		U(0x1c00)
#define GICD_IPRIORITYRE	U(0x2000)
#define GICD_ICFGRE		U(0x3000)
#define GICD_IGRPMODRE		U(0x3400)
#define GICD_NSACRE		U(0x3600)
/*
 * GICD_IROUTER<n> register is at 0x6000 + 8n, where n is the interrupt ID
 * and n >= 32, making the effective offset as 0x6100
 */
#define GICD_IROUTER		U(0x6000)
#define GICD_IROUTERE		U(0x8000)

#define GICD_PIDR0_GICV3	U(0xffe0)
#define GICD_PIDR1_GICV3	U(0xffe4)
#define GICD_PIDR2_GICV3	U(0xffe8)

#define IGRPMODR_SHIFT		5

/* GICD_CTLR bit definitions */
#define CTLR_ENABLE_G1NS_SHIFT		1
#define CTLR_ENABLE_G1S_SHIFT		2
#define CTLR_ARE_S_SHIFT		4
#define CTLR_ARE_NS_SHIFT		5
#define CTLR_DS_SHIFT			6
#define CTLR_E1NWF_SHIFT		7
#define GICD_CTLR_RWP_SHIFT		31

#define CTLR_ENABLE_G1NS_MASK		U(0x1)
#define CTLR_ENABLE_G1S_MASK		U(0x1)
#define CTLR_ARE_S_MASK			U(0x1)
#define CTLR_ARE_NS_MASK		U(0x1)
#define CTLR_DS_MASK			U(0x1)
#define CTLR_E1NWF_MASK			U(0x1)
#define GICD_CTLR_RWP_MASK		U(0x1)

#define CTLR_ENABLE_G1NS_BIT		BIT_32(CTLR_ENABLE_G1NS_SHIFT)
#define CTLR_ENABLE_G1S_BIT		BIT_32(CTLR_ENABLE_G1S_SHIFT)
#define CTLR_ARE_S_BIT			BIT_32(CTLR_ARE_S_SHIFT)
#define CTLR_ARE_NS_BIT			BIT_32(CTLR_ARE_NS_SHIFT)
#define CTLR_DS_BIT			BIT_32(CTLR_DS_SHIFT)
#define CTLR_E1NWF_BIT			BIT_32(CTLR_E1NWF_SHIFT)
#define GICD_CTLR_RWP_BIT		BIT_32(GICD_CTLR_RWP_SHIFT)

/* GICD_IROUTER shifts and masks */
#define IROUTER_SHIFT		0
#define IROUTER_IRM_SHIFT	31
#define IROUTER_IRM_MASK	U(0x1)

#define GICV3_IRM_PE		U(0)
#define GICV3_IRM_ANY		U(1)

#define NUM_OF_DIST_REGS	30

/* GICD_TYPER shifts and masks */
#define	TYPER_ESPI		U(1 << 8)
#define	TYPER_DVIS		U(1 << 18)
#define	TYPER_ESPI_RANGE_MASK	U(0x1f)
#define	TYPER_ESPI_RANGE_SHIFT	U(27)
#define	TYPER_ESPI_RANGE	U(TYPER_ESPI_MASK << TYPER_ESPI_SHIFT)

/*******************************************************************************
 * Common GIC Redistributor interface registers & constants
 ******************************************************************************/
#define GICR_V4_PCPUBASE_SHIFT	0x12
#define GICR_V3_PCPUBASE_SHIFT	0x11
#define GICR_SGIBASE_OFFSET	U(65536)	/* 64 KB */
#define GICR_CTLR		U(0x0)
#define GICR_IIDR		U(0x04)
#define GICR_TYPER		U(0x08)
#define GICR_STATUSR		U(0x10)
#define GICR_WAKER		U(0x14)
#define GICR_PROPBASER		U(0x70)
#define GICR_PENDBASER		U(0x78)
#define GICR_IGROUPR0		(GICR_SGIBASE_OFFSET + U(0x80))
#define GICR_ISENABLER0		(GICR_SGIBASE_OFFSET + U(0x100))
#define GICR_ICENABLER0		(GICR_SGIBASE_OFFSET + U(0x180))
#define GICR_ISPENDR0		(GICR_SGIBASE_OFFSET + U(0x200))
#define GICR_ICPENDR0		(GICR_SGIBASE_OFFSET + U(0x280))
#define GICR_ISACTIVER0		(GICR_SGIBASE_OFFSET + U(0x300))
#define GICR_ICACTIVER0		(GICR_SGIBASE_OFFSET + U(0x380))
#define GICR_IPRIORITYR		(GICR_SGIBASE_OFFSET + U(0x400))
#define GICR_ICFGR0		(GICR_SGIBASE_OFFSET + U(0xc00))
#define GICR_ICFGR1		(GICR_SGIBASE_OFFSET + U(0xc04))
#define GICR_IGRPMODR0		(GICR_SGIBASE_OFFSET + U(0xd00))
#define GICR_NSACR		(GICR_SGIBASE_OFFSET + U(0xe00))

#define GICR_IGROUPR		GICR_IGROUPR0
#define GICR_ISENABLER		GICR_ISENABLER0
#define GICR_ICENABLER		GICR_ICENABLER0
#define GICR_ISPENDR		GICR_ISPENDR0
#define GICR_ICPENDR		GICR_ICPENDR0
#define GICR_ISACTIVER		GICR_ISACTIVER0
#define GICR_ICACTIVER		GICR_ICACTIVER0
#define GICR_ICFGR		GICR_ICFGR0
#define GICR_IGRPMODR		GICR_IGRPMODR0

/* GICR_CTLR bit definitions */
#define GICR_CTLR_UWP_SHIFT	31
#define GICR_CTLR_UWP_MASK	U(0x1)
#define GICR_CTLR_UWP_BIT	BIT_32(GICR_CTLR_UWP_SHIFT)
#define GICR_CTLR_DPG1S_SHIFT	26
#define GICR_CTLR_DPG1S_MASK	U(0x1)
#define GICR_CTLR_DPG1S_BIT	BIT_32(GICR_CTLR_DPG1S_SHIFT)
#define GICR_CTLR_DPG1NS_SHIFT	25
#define GICR_CTLR_DPG1NS_MASK	U(0x1)
#define GICR_CTLR_DPG1NS_BIT	BIT_32(GICR_CTLR_DPG1NS_SHIFT)
#define GICR_CTLR_DPG0_SHIFT	24
#define GICR_CTLR_DPG0_MASK	U(0x1)
#define GICR_CTLR_DPG0_BIT	BIT_32(GICR_CTLR_DPG0_SHIFT)
#define GICR_CTLR_RWP_SHIFT	3
#define GICR_CTLR_RWP_MASK	U(0x1)
#define GICR_CTLR_RWP_BIT	BIT_32(GICR_CTLR_RWP_SHIFT)
#define GICR_CTLR_EN_LPIS_BIT	BIT_32(0)

/* GICR_WAKER bit definitions */
#define WAKER_CA_SHIFT		2
#define WAKER_PS_SHIFT		1

#define WAKER_CA_MASK		U(0x1)
#define WAKER_PS_MASK		U(0x1)

#define WAKER_CA_BIT		BIT_32(WAKER_CA_SHIFT)
#define WAKER_PS_BIT		BIT_32(WAKER_PS_SHIFT)

/* GICR_TYPER bit definitions */
#define TYPER_AFF_VAL_SHIFT	32
#define TYPER_PROC_NUM_SHIFT	8
#define TYPER_LAST_SHIFT	4
#define TYPER_VLPI_SHIFT	1

#define TYPER_AFF_VAL_MASK	U(0xffffffff)
#define TYPER_PROC_NUM_MASK	U(0xffff)
#define TYPER_LAST_MASK		U(0x1)

#define TYPER_LAST_BIT		BIT_32(TYPER_LAST_SHIFT)
#define TYPER_VLPI_BIT		BIT_32(TYPER_VLPI_SHIFT)

#define TYPER_PPI_NUM_SHIFT	U(27)
#define TYPER_PPI_NUM_MASK	U(0x1f)

/* GICR_IIDR bit definitions */
#define IIDR_PRODUCT_ID_MASK	U(0xff)
#define IIDR_VARIANT_MASK	U(0xf)
#define IIDR_REV_MASK		U(0xf)
#define IIDR_IMPLEMENTER_MASK	U(0xfff)
#define IIDR_PRODUCT_ID_SHIFT	24
#define IIDR_VARIANT_SHIFT	16
#define IIDR_REV_SHIFT		12
#define IIDR_IMPLEMENTER_SHIFT	0
#define IIDR_PRODUCT_ID_BIT	BIT_32(IIDR_PRODUCT_ID_SHIFT)
#define IIDR_VARIANT_BIT	BIT_32(IIDR_VARIANT_SHIFT)
#define IIDR_REV_BIT		BIT_32(IIDR_REVISION_SHIFT)
#define IIDR_IMPLEMENTER_BIT	BIT_32(IIDR_IMPLEMENTER_SHIFT)

#define IIDR_MODEL_MASK		(IIDR_PRODUCT_ID_MASK << IIDR_PRODUCT_ID_SHIFT | \
				 IIDR_IMPLEMENTER_MASK << IIDR_IMPLEMENTER_SHIFT)

#define GIC_PRODUCT_ID_GIC600	U(0x2)
#define GIC_PRODUCT_ID_GIC600AE	U(0x3)
#define GIC_PRODUCT_ID_GIC700	U(0x4)

/*
 * Note that below revisions and variants definations are as per GIC600/GIC600AE
 * specification.
 */
#define GIC_REV_P0		U(0x1)
#define GIC_REV_P1		U(0x3)
#define GIC_REV_P2		U(0x4)
#define GIC_REV_P3		U(0x5)
#define GIC_REV_P4		U(0x6)
#define GIC_REV_P6		U(0x7)

#define GIC_VARIANT_R0		U(0x0)
#define GIC_VARIANT_R1		U(0x1)
#define GIC_VARIANT_R2		U(0x2)

/*******************************************************************************
 * GICv3 and 3.1 CPU interface registers & constants
 ******************************************************************************/
/* ICC_SRE bit definitions */
#define ICC_SRE_EN_BIT		BIT_32(3)
#define ICC_SRE_DIB_BIT		BIT_32(2)
#define ICC_SRE_DFB_BIT		BIT_32(1)
#define ICC_SRE_SRE_BIT		BIT_32(0)

/* ICC_IGRPEN1_EL3 bit definitions */
#define IGRPEN1_EL3_ENABLE_G1NS_SHIFT	0
#define IGRPEN1_EL3_ENABLE_G1S_SHIFT	1

#define IGRPEN1_EL3_ENABLE_G1NS_BIT	BIT_32(IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
#define IGRPEN1_EL3_ENABLE_G1S_BIT	BIT_32(IGRPEN1_EL3_ENABLE_G1S_SHIFT)

/* ICC_IGRPEN0_EL1 bit definitions */
#define IGRPEN1_EL1_ENABLE_G0_SHIFT	0
#define IGRPEN1_EL1_ENABLE_G0_BIT	BIT_32(IGRPEN1_EL1_ENABLE_G0_SHIFT)

/* ICC_HPPIR0_EL1 bit definitions */
#define HPPIR0_EL1_INTID_SHIFT		0
#define HPPIR0_EL1_INTID_MASK		U(0xffffff)

/* ICC_HPPIR1_EL1 bit definitions */
#define HPPIR1_EL1_INTID_SHIFT		0
#define HPPIR1_EL1_INTID_MASK		U(0xffffff)

/* ICC_IAR0_EL1 bit definitions */
#define IAR0_EL1_INTID_SHIFT		0
#define IAR0_EL1_INTID_MASK		U(0xffffff)

/* ICC_IAR1_EL1 bit definitions */
#define IAR1_EL1_INTID_SHIFT		0
#define IAR1_EL1_INTID_MASK		U(0xffffff)

/* ICC SGI macros */
#define SGIR_TGT_MASK			ULL(0xffff)
#define SGIR_AFF1_SHIFT			16
#define SGIR_INTID_SHIFT		24
#define SGIR_INTID_MASK			ULL(0xf)
#define SGIR_AFF2_SHIFT			32
#define SGIR_IRM_SHIFT			40
#define SGIR_IRM_MASK			ULL(0x1)
#define SGIR_AFF3_SHIFT			48
#define SGIR_AFF_MASK			ULL(0xff)

#define SGIR_IRM_TO_AFF			U(0)

#define GICV3_SGIR_VALUE(_aff3, _aff2, _aff1, _intid, _irm, _tgt)	\
	((((uint64_t) (_aff3) & SGIR_AFF_MASK) << SGIR_AFF3_SHIFT) |	\
	 (((uint64_t) (_irm) & SGIR_IRM_MASK) << SGIR_IRM_SHIFT) |	\
	 (((uint64_t) (_aff2) & SGIR_AFF_MASK) << SGIR_AFF2_SHIFT) |	\
	 (((_intid) & SGIR_INTID_MASK) << SGIR_INTID_SHIFT) |		\
	 (((_aff1) & SGIR_AFF_MASK) << SGIR_AFF1_SHIFT) |		\
	 ((_tgt) & SGIR_TGT_MASK))

/*****************************************************************************
 * GICv3 and 3.1 ITS registers and constants
 *****************************************************************************/
#define GITS_CTLR			U(0x0)
#define GITS_IIDR			U(0x4)
#define GITS_TYPER			U(0x8)
#define GITS_CBASER			U(0x80)
#define GITS_CWRITER			U(0x88)
#define GITS_CREADR			U(0x90)
#define GITS_BASER			U(0x100)

/* GITS_CTLR bit definitions */
#define GITS_CTLR_ENABLED_BIT		BIT_32(0)
#define GITS_CTLR_QUIESCENT_BIT		BIT_32(1)

#define GITS_TYPER_VSGI			BIT_64(39)

#ifndef __ASSEMBLER__

#include <stdbool.h>
#include <stdint.h>

#include <arch_helpers.h>
#include <common/interrupt_props.h>
#include <drivers/arm/gic_common.h>
#include <lib/utils_def.h>

typedef enum {
	GICV3_G1S,
	GICV3_G1NS,
	GICV3_G0
} gicv3_irq_group_t;

static inline uintptr_t gicv3_redist_size(uint64_t typer_val)
{
#if GIC_ENABLE_V4_EXTN
	if ((typer_val & TYPER_VLPI_BIT) != 0U) {
		return 1U << GICR_V4_PCPUBASE_SHIFT;
	} else {
		return 1U << GICR_V3_PCPUBASE_SHIFT;
	}
#else
	return 1U << GICR_V3_PCPUBASE_SHIFT;
#endif
}

unsigned int gicv3_get_component_partnum(const uintptr_t gic_frame);

static inline bool gicv3_is_intr_id_special_identifier(unsigned int id)
{
	return (id >= PENDING_G1S_INTID) && (id <= GIC_SPURIOUS_INTERRUPT);
}

/*******************************************************************************
 * Helper GICv3 and 3.1 macros for SEL1
 ******************************************************************************/
static inline uint32_t gicv3_acknowledge_interrupt_sel1(void)
{
	return (uint32_t)read_icc_iar1_el1() & IAR1_EL1_INTID_MASK;
}

static inline uint32_t gicv3_get_pending_interrupt_id_sel1(void)
{
	return (uint32_t)read_icc_hppir1_el1() & HPPIR1_EL1_INTID_MASK;
}

static inline void gicv3_end_of_interrupt_sel1(unsigned int id)
{
	/*
	 * Interrupt request deassertion from peripheral to GIC happens
	 * by clearing interrupt condition by a write to the peripheral
	 * register. It is desired that the write transfer is complete
	 * before the core tries to change GIC state from 'AP/Active' to
	 * a new state on seeing 'EOI write'.
	 * Since ICC interface writes are not ordered against Device
	 * memory writes, a barrier is required to ensure the ordering.
	 * The dsb will also ensure *completion* of previous writes with
	 * DEVICE nGnRnE attribute.
	 */
	dsbishst();
	write_icc_eoir1_el1(id);
}

/*******************************************************************************
 * Helper GICv3 macros for EL3
 ******************************************************************************/
static inline uint32_t gicv3_acknowledge_interrupt(void)
{
	return (uint32_t)read_icc_iar0_el1() & IAR0_EL1_INTID_MASK;
}

static inline void gicv3_end_of_interrupt(unsigned int id)
{
	/*
	 * Interrupt request deassertion from peripheral to GIC happens
	 * by clearing interrupt condition by a write to the peripheral
	 * register. It is desired that the write transfer is complete
	 * before the core tries to change GIC state from 'AP/Active' to
	 * a new state on seeing 'EOI write'.
	 * Since ICC interface writes are not ordered against Device
	 * memory writes, a barrier is required to ensure the ordering.
	 * The dsb will also ensure *completion* of previous writes with
	 * DEVICE nGnRnE attribute.
	 */
	dsbishst();
	return write_icc_eoir0_el1(id);
}

/*
 * This macro returns the total number of GICD/GICR registers corresponding to
 * the register name
 */
#define GICD_NUM_REGS(reg_name)	\
	DIV_ROUND_UP_2EVAL(TOTAL_SHARED_INTR_NUM, (1 << reg_name##_SHIFT))

#define GICR_NUM_REGS(reg_name)	\
	DIV_ROUND_UP_2EVAL(TOTAL_PRIVATE_INTR_NUM, (1 << reg_name##_SHIFT))

/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
#define INT_ID_MASK	U(0xffffff)

/*******************************************************************************
 * This structure describes some of the implementation defined attributes of the
 * GICv3 IP. It is used by the platform port to specify these attributes in order
 * to initialise the GICV3 driver. The attributes are described below.
 *
 * The 'gicd_base' field contains the base address of the Distributor interface
 * programmer's view.
 *
 * The 'gicr_base' field contains the base address of the Re-distributor
 * interface programmer's view.
 *
 * The 'interrupt_props' field is a pointer to an array that enumerates secure
 * interrupts and their properties. If this field is not NULL, both
 * 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
 *
 * The 'interrupt_props_num' field contains the number of entries in the
 * 'interrupt_props' array. If this field is non-zero, both 'g0_interrupt_num'
 * and 'g1s_interrupt_num' are ignored.
 *
 * The 'rdistif_num' field contains the number of Redistributor interfaces the
 * GIC implements. This is equal to the number of CPUs or CPU interfaces
 * instantiated in the GIC.
 *
 * The 'rdistif_base_addrs' field is a pointer to an array that has an entry for
 * storing the base address of the Redistributor interface frame of each CPU in
 * the system. The size of the array = 'rdistif_num'. The base addresses are
 * detected during driver initialisation.
 *
 * The 'mpidr_to_core_pos' field is a pointer to a hash function which the
 * driver will use to convert an MPIDR value to a linear core index. This index
 * will be used for accessing the 'rdistif_base_addrs' array. This is an
 * optional field. A GICv3 implementation maps each MPIDR to a linear core index
 * as well. This mapping can be found by reading the "Affinity Value" and
 * "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
 * "Processor Numbers" are suitable to index into an array to access core
 * specific information. If this not the case, the platform port must provide a
 * hash function. Otherwise, the "Processor Number" field will be used to access
 * the array elements.
 ******************************************************************************/
typedef unsigned int (*mpidr_hash_fn)(u_register_t mpidr);

typedef struct gicv3_driver_data {
	uintptr_t gicd_base;
	uintptr_t gicr_base;
	const interrupt_prop_t *interrupt_props;
	unsigned int interrupt_props_num;
	unsigned int rdistif_num;
	uintptr_t *rdistif_base_addrs;
	mpidr_hash_fn mpidr_to_core_pos;
} gicv3_driver_data_t;

typedef struct gicv3_redist_ctx {
	/* 64 bits registers */
	uint64_t gicr_propbaser;
	uint64_t gicr_pendbaser;

	/* 32 bits registers */
	uint32_t gicr_ctlr;
	uint32_t gicr_igroupr[GICR_NUM_REGS(IGROUPR)];
	uint32_t gicr_isenabler[GICR_NUM_REGS(ISENABLER)];
	uint32_t gicr_ispendr[GICR_NUM_REGS(ISPENDR)];
	uint32_t gicr_isactiver[GICR_NUM_REGS(ISACTIVER)];
	uint32_t gicr_ipriorityr[GICR_NUM_REGS(IPRIORITYR)];
	uint32_t gicr_icfgr[GICR_NUM_REGS(ICFGR)];
	uint32_t gicr_igrpmodr[GICR_NUM_REGS(IGRPMODR)];
	uint32_t gicr_nsacr;
} gicv3_redist_ctx_t;

typedef struct gicv3_dist_ctx {
	/* 64 bits registers */
	uint64_t gicd_irouter[TOTAL_SHARED_INTR_NUM];

	/* 32 bits registers */
	uint32_t gicd_ctlr;
	uint32_t gicd_igroupr[GICD_NUM_REGS(IGROUPR)];
	uint32_t gicd_isenabler[GICD_NUM_REGS(ISENABLER)];
	uint32_t gicd_ispendr[GICD_NUM_REGS(ISPENDR)];
	uint32_t gicd_isactiver[GICD_NUM_REGS(ISACTIVER)];
	uint32_t gicd_ipriorityr[GICD_NUM_REGS(IPRIORITYR)];
	uint32_t gicd_icfgr[GICD_NUM_REGS(ICFGR)];
	uint32_t gicd_igrpmodr[GICD_NUM_REGS(IGRPMODR)];
	uint32_t gicd_nsacr[GICD_NUM_REGS(NSACR)];
} gicv3_dist_ctx_t;

typedef struct gicv3_its_ctx {
	/* 64 bits registers */
	uint64_t gits_cbaser;
	uint64_t gits_cwriter;
	uint64_t gits_baser[8];

	/* 32 bits registers */
	uint32_t gits_ctlr;
} gicv3_its_ctx_t;

/*******************************************************************************
 * GICv3 EL3 driver API
 ******************************************************************************/
void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
int gicv3_rdistif_probe(const uintptr_t gicr_frame);
void gicv3_distif_init(void);
void gicv3_rdistif_init(unsigned int proc_num);
void gicv3_rdistif_on(unsigned int proc_num);
void gicv3_rdistif_off(unsigned int proc_num);
unsigned int gicv3_rdistif_get_number_frames(const uintptr_t gicr_frame);
void gicv3_cpuif_enable(unsigned int proc_num);
void gicv3_cpuif_disable(unsigned int proc_num);
unsigned int gicv3_get_pending_interrupt_type(void);
unsigned int gicv3_get_pending_interrupt_id(void);
unsigned int gicv3_get_interrupt_group(unsigned int id,
					  unsigned int proc_num);
void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx);
void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx);
/*
 * gicv3_distif_post_restore and gicv3_distif_pre_save must be implemented if
 * gicv3_distif_save and gicv3_rdistif_init_restore are used. If no
 * implementation-defined sequence is needed at these steps, an empty function
 * can be provided.
 */
void gicv3_distif_post_restore(unsigned int proc_num);
void gicv3_distif_pre_save(unsigned int proc_num);
void gicv3_rdistif_init_restore(unsigned int proc_num, const gicv3_redist_ctx_t * const rdist_ctx);
void gicv3_rdistif_save(unsigned int proc_num, gicv3_redist_ctx_t * const rdist_ctx);
void gicv3_its_save_disable(uintptr_t gits_base, gicv3_its_ctx_t * const its_ctx);
void gicv3_its_restore(uintptr_t gits_base, const gicv3_its_ctx_t * const its_ctx);

unsigned int gicv3_get_running_priority(void);
unsigned int gicv3_get_interrupt_active(unsigned int id, unsigned int proc_num);
void gicv3_enable_interrupt(unsigned int id, unsigned int proc_num);
void gicv3_disable_interrupt(unsigned int id, unsigned int proc_num);
void gicv3_set_interrupt_priority(unsigned int id, unsigned int proc_num,
		unsigned int priority);
void gicv3_set_interrupt_group(unsigned int id, unsigned int proc_num,
		unsigned int group);
void gicv3_raise_sgi(unsigned int sgi_num, gicv3_irq_group_t group,
					 u_register_t target);
void gicv3_set_spi_routing(unsigned int id, unsigned int irm,
		u_register_t mpidr);
void gicv3_set_interrupt_pending(unsigned int id, unsigned int proc_num);
void gicv3_clear_interrupt_pending(unsigned int id, unsigned int proc_num);
unsigned int gicv3_set_pmr(unsigned int mask);
unsigned int gicv3_deactivate_priority(unsigned int mask);

void gicv3_get_component_prodid_rev(const uintptr_t gicd_base,
				    unsigned int *gic_prod_id,
				    uint8_t *gic_rev);
void gicv3_check_erratas_applies(const uintptr_t gicd_base);
#if GIC600_ERRATA_WA_2384374
void gicv3_apply_errata_wa_2384374(const uintptr_t gicr_base);
#else
static inline void gicv3_apply_errata_wa_2384374(const uintptr_t gicr_base)
{
}
#endif /* GIC600_ERRATA_WA_2384374 */

#endif /* __ASSEMBLER__ */
#endif /* GICV3_H */