diff --git a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
index 78360b0..18f1a37 100644
--- a/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
@@ -20,71 +20,72 @@
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
-    {
-	    .image_id = SCP_BL2_IMAGE_ID,
+	{
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 #endif /* SCP_BL2_BASE */
 
 	/* Fill BL32 related information */
-    {
-	    .image_id = BL32_IMAGE_ID,
+	{
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL32_BASE,
-	    .ep_info.spsr = SPSR_MODE32(MODE32_mon, SPSR_T_ARM,
-		    SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL32_BASE,
+		.ep_info.spsr = SPSR_MODE32(MODE32_mon, SPSR_T_ARM,
+			SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
-    },
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
 	/* Fill HW_CONFIG related information if it exists */
-    {
-	    .image_id = HW_CONFIG_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+	{
+		.image_id = HW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t,
+			NON_SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 	/* Fill BL33 related information */
-    {
-	    .image_id = BL33_IMAGE_ID,
+	{
+		.image_id = BL33_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 #ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #else
-	    .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
+		.ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
-	    .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
-		    - PLAT_ARM_NS_IMAGE_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
+		.image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
+			- PLAT_ARM_NS_IMAGE_BASE,
 #endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    }
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
 };
 
 REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
index 0666e57..3d7b361 100644
--- a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
@@ -20,203 +20,207 @@
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
-    {
-	    .image_id = SCP_BL2_IMAGE_ID,
+	{
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 # if defined(BL32_BASE)
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 # elif ENABLE_RME
-	    .next_handoff_image_id = RMM_IMAGE_ID,
+		.next_handoff_image_id = RMM_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
-    },
+	},
 	/* Fill HW_CONFIG related information */
-    {
-	    .image_id = HW_CONFIG_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+	{
+		.image_id = HW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t,
+			NON_SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 	/* Fill SOC_FW_CONFIG related information */
-    {
-	    .image_id = SOC_FW_CONFIG_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+	{
+		.image_id = SOC_FW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 # if ENABLE_RME
 	/* Fill RMM related information */
-    {
-	    .image_id = RMM_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, EP_REALM | EXECUTABLE),
-	    .ep_info.pc = RMM_BASE,
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = RMM_BASE,
-	    .image_info.image_max_size = RMM_LIMIT - RMM_BASE,
-	    .next_handoff_image_id = BL33_IMAGE_ID,
-    },
+	{
+		.image_id = RMM_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, EP_REALM | EXECUTABLE),
+		.ep_info.pc = RMM_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = RMM_BASE,
+		.image_info.image_max_size = RMM_LIMIT - RMM_BASE,
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
 # endif
 
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
-    {
-	    .image_id = BL32_IMAGE_ID,
+	{
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
 # if ENABLE_RME
-	    .next_handoff_image_id = RMM_IMAGE_ID,
+		.next_handoff_image_id = RMM_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
-    },
+	},
 
 	/*
 	 * Fill BL32 external 1 related information.
-	 * A typical use for extra1 image is with OP-TEE where it is the pager image.
+	 * A typical use for extra1 image is with OP-TEE where it is the pager
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA1_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA1_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 2 related information.
-	 * A typical use for extra2 image is with OP-TEE where it is the paged image.
+	 * A typical use for extra2 image is with OP-TEE where it is the paged
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA2_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #ifdef SPD_opteed
-	    .image_info.image_base = ARM_OPTEE_PAGEABLE_LOAD_BASE,
-	    .image_info.image_max_size = ARM_OPTEE_PAGEABLE_LOAD_SIZE,
+		.image_info.image_base = ARM_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = ARM_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 	/* Fill TOS_FW_CONFIG related information */
-    {
-	    .image_id = TOS_FW_CONFIG_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+	{
+		.image_id = TOS_FW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 # endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
-    {
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 # ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 # else
-	    .ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
+		.ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
-	    .image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
-		    - PLAT_ARM_NS_IMAGE_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
+		.image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
+			- PLAT_ARM_NS_IMAGE_BASE,
 # endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 	/* Fill NT_FW_CONFIG related information */
-    {
-	    .image_id = NT_FW_CONFIG_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, NON_SECURE | NON_EXECUTABLE),
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    }
+	{
+		.image_id = NT_FW_CONFIG_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t,
+			NON_SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
 #endif /* EL3_PAYLOAD_BASE */
 };
 
diff --git a/plat/brcm/common/brcm_bl2_mem_params_desc.c b/plat/brcm/common/brcm_bl2_mem_params_desc.c
index f711354..aed99d9 100644
--- a/plat/brcm/common/brcm_bl2_mem_params_desc.c
+++ b/plat/brcm/common/brcm_bl2_mem_params_desc.c
@@ -22,84 +22,84 @@
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
 	{
-	    .image_id = SCP_BL2_IMAGE_ID,
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = PLAT_MAX_SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 #endif /* SCP_BL2_BASE */
 
 	/* Fill BL31 related information */
 	{
-	    .image_id = BL31_IMAGE_ID,
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg3 = BRCM_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 #ifdef BL32_BASE
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 #else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 #endif
 	},
 
 #ifdef BL32_BASE
 	/* Fill BL32 related information */
 	{
-	    .image_id = BL32_IMAGE_ID,
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 	},
 #endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
 	{
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 #ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #else
-	    .ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
+		.ep_info.pc = PLAT_BRCM_NS_IMAGE_OFFSET,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
-	    .image_info.image_max_size = BRCM_DRAM1_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_BRCM_NS_IMAGE_OFFSET,
+		.image_info.image_max_size = BRCM_DRAM1_SIZE,
 #endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	}
 };
 
diff --git a/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c b/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
index 4e013a0..d029703 100644
--- a/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
+++ b/plat/hisilicon/hikey/hikey_bl2_mem_params_desc.c
@@ -21,144 +21,146 @@
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
-    {
-	    .image_id = SCP_BL2_IMAGE_ID,
+	{
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg1 = HIKEY_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg1 = HIKEY_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 # ifdef BL32_BASE
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
-    },
+	},
 
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
-    {
-	    .image_id = BL32_IMAGE_ID,
+	{
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
-    },
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 1 related information.
-	 * A typical use for extra1 image is with OP-TEE where it is the pager image.
+	 * A typical use for extra1 image is with OP-TEE where it is the pager
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA1_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA1_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 2 related information.
-	 * A typical use for extra2 image is with OP-TEE where it is the paged image.
+	 * A typical use for extra2 image is with OP-TEE where it is the paged
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA2_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #ifdef SPD_opteed
-	    .image_info.image_base = HIKEY_OPTEE_PAGEABLE_LOAD_BASE,
-	    .image_info.image_max_size = HIKEY_OPTEE_PAGEABLE_LOAD_SIZE,
+		.image_info.image_base = HIKEY_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = HIKEY_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 # endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
-    {
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 # ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 # else
-	    .ep_info.pc = HIKEY_NS_IMAGE_OFFSET,
+		.ep_info.pc = HIKEY_NS_IMAGE_OFFSET,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = HIKEY_NS_IMAGE_OFFSET,
-	    .image_info.image_max_size = 0x200000 /* 2MB */,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = HIKEY_NS_IMAGE_OFFSET,
+		.image_info.image_max_size = 0x200000 /* 2MB */,
 # endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    }
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
 #endif /* EL3_PAYLOAD_BASE */
 };
 
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c b/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
index ba236d2..39a54cb 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_mem_params_desc.c
@@ -21,144 +21,146 @@
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
-    {
-	    .image_id = SCP_BL2_IMAGE_ID,
+	{
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg1 = HIKEY960_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg1 = HIKEY960_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 # ifdef BL32_BASE
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
-    },
+	},
 
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
-    {
-	    .image_id = BL32_IMAGE_ID,
+	{
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
-    },
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 1 related information.
-	 * A typical use for extra1 image is with OP-TEE where it is the pager image.
+	 * A typical use for extra1 image is with OP-TEE where it is the pager
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA1_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA1_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 2 related information.
-	 * A typical use for extra2 image is with OP-TEE where it is the paged image.
+	 * A typical use for extra2 image is with OP-TEE where it is the paged
+	 * image.
 	 */
-    {
-	    .image_id = BL32_EXTRA2_IMAGE_ID,
+	{
+		.image_id = BL32_EXTRA2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #ifdef SPD_opteed
-	    .image_info.image_base = HIKEY960_OPTEE_PAGEABLE_LOAD_BASE,
-	    .image_info.image_max_size = HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE,
+		.image_info.image_base = HIKEY960_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = HIKEY960_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 # endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
-    {
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 # ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 # else
-	    .ep_info.pc = NS_BL1U_BASE,
+		.ep_info.pc = NS_BL1U_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = NS_BL1U_BASE,
-	    .image_info.image_max_size = 0x200000 /* 2MB */,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = NS_BL1U_BASE,
+		.image_info.image_max_size = 0x200000 /* 2MB */,
 # endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    }
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
 #endif /* EL3_PAYLOAD_BASE */
 };
 
diff --git a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
index f683d75..9bda02e 100644
--- a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
+++ b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
@@ -22,143 +22,145 @@
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
 	{
-	    .image_id = SCP_BL2_IMAGE_ID,
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
 	{
-	    .image_id = BL31_IMAGE_ID,
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
 	{
-	    .image_id = BL31_IMAGE_ID,
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 # ifdef BL32_BASE
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
 	},
 
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
 	{
-	    .image_id = BL32_IMAGE_ID,
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 	},
 
 	/*
 	 * Fill BL32 external 1 related information.
-	 * A typical use for extra1 image is with OP-TEE where it is the pager image.
+	 * A typical use for extra1 image is with OP-TEE where it is the pager
+	 * image.
 	 */
 	{
-	    .image_id = BL32_EXTRA1_IMAGE_ID,
+		.image_id = BL32_EXTRA1_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 
 	/*
 	 * Fill BL32 external 2 related information.
-	 * A typical use for extra2 image is with OP-TEE where it is the paged image.
+	 * A typical use for extra2 image is with OP-TEE where it is the paged
+	 * image.
 	 */
 	{
-	    .image_id = BL32_EXTRA2_IMAGE_ID,
+		.image_id = BL32_EXTRA2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #ifdef SPD_opteed
-	    .image_info.image_base = POPLAR_OPTEE_PAGEABLE_LOAD_BASE,
-	    .image_info.image_max_size = POPLAR_OPTEE_PAGEABLE_LOAD_SIZE,
+		.image_info.image_base = POPLAR_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = POPLAR_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 # endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
 	{
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 # ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 # else
-	    .ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
+		.ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
-	    .image_info.image_max_size = DDR_BASE + DDR_SIZE -
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
+		.image_info.image_max_size = DDR_BASE + DDR_SIZE -
 					PLAT_POPLAR_NS_IMAGE_OFFSET,
 # endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	}
 #endif /* EL3_PAYLOAD_BASE */
 };
diff --git a/plat/intel/soc/common/bl2_plat_mem_params_desc.c b/plat/intel/soc/common/bl2_plat_mem_params_desc.c
index 4f75665..187c53a 100644
--- a/plat/intel/soc/common/bl2_plat_mem_params_desc.c
+++ b/plat/intel/soc/common/bl2_plat_mem_params_desc.c
@@ -22,58 +22,58 @@
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
 	{
-	    .image_id = SCP_BL2_IMAGE_ID,
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
 	{
-	    .image_id = BL31_IMAGE_ID,
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
 	{
-	    .image_id = BL31_IMAGE_ID,
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 	},
 #endif /* EL3_PAYLOAD_BASE */
 
diff --git a/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c b/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
index 8d909dc..6c55858 100644
--- a/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
+++ b/plat/marvell/armada/common/aarch64/marvell_bl2_mem_params_desc.c
@@ -22,84 +22,84 @@
 static bl_mem_params_node_t bl2_mem_params_descs[] = {
 #ifdef SCP_BL2_BASE
 	/* Fill SCP_BL2 related information if it exists */
-    {
-	    .image_id = SCP_BL2_IMAGE_ID,
+	{
+		.image_id = SCP_BL2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = SCP_BL2_BASE,
-	    .image_info.image_max_size = SCP_BL2_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = SCP_BL2_BASE,
+		.image_info.image_max_size = SCP_BL2_SIZE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 #endif /* SCP_BL2_BASE */
 
 #ifdef EL3_PAYLOAD_BASE
 	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = EL3_PAYLOAD_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = EL3_PAYLOAD_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t,
-		    IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t,
+			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    },
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	},
 
 #else /* EL3_PAYLOAD_BASE */
 
 	/* Fill BL31 related information */
-    {
-	    .image_id = BL31_IMAGE_ID,
+	{
+		.image_id = BL31_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t,
-		    SECURE | EXECUTABLE | EP_FIRST_EXE),
-	    .ep_info.pc = BL31_BASE,
-	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
-		    DISABLE_ALL_EXCEPTIONS),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t,
+			SECURE | EXECUTABLE | EP_FIRST_EXE),
+		.ep_info.pc = BL31_BASE,
+		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg3 = MARVELL_BL31_PLAT_PARAM_VAL,
+		.ep_info.args.arg3 = MARVELL_BL31_PLAT_PARAM_VAL,
 #endif
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
-	    .image_info.image_base = BL31_BASE,
-	    .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+		.image_info.image_base = BL31_BASE,
+		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,
 
 # ifdef BL32_BASE
-	    .next_handoff_image_id = BL32_IMAGE_ID,
+		.next_handoff_image_id = BL32_IMAGE_ID,
 # else
-	    .next_handoff_image_id = BL33_IMAGE_ID,
+		.next_handoff_image_id = BL33_IMAGE_ID,
 # endif
-    },
+	},
 
 # ifdef BL32_BASE
 	/* Fill BL32 related information */
-    {
-	    .image_id = BL32_IMAGE_ID,
+	{
+		.image_id = BL32_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
-	    .ep_info.pc = BL32_BASE,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+		.ep_info.pc = BL32_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = BL33_IMAGE_ID,
-    },
+		.next_handoff_image_id = BL33_IMAGE_ID,
+	},
 
 	/*
 	 * Fill BL32 external 1 related information.
@@ -107,17 +107,17 @@
 	 * where it is the pager image.
 	 */
 	{
-	    .image_id = BL32_EXTRA1_IMAGE_ID,
+		.image_id = BL32_EXTRA1_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-	    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+		VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-	    .image_info.image_base = BL32_BASE,
-	    .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		.image_info.image_base = BL32_BASE,
+		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 
 	/*
@@ -126,42 +126,42 @@
 	 * where it is the paged image.
 	 */
 	{
-	    .image_id = BL32_EXTRA2_IMAGE_ID,
+		.image_id = BL32_EXTRA2_IMAGE_ID,
 
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 #ifdef SPD_opteed
-	    .image_info.image_base = MARVELL_OPTEE_PAGEABLE_LOAD_BASE,
-	    .image_info.image_max_size = MARVELL_OPTEE_PAGEABLE_LOAD_SIZE,
+		.image_info.image_base = MARVELL_OPTEE_PAGEABLE_LOAD_BASE,
+		.image_info.image_max_size = MARVELL_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
+		.next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 # endif /* BL32_BASE */
 
 	/* Fill BL33 related information */
-    {
-	    .image_id = BL33_IMAGE_ID,
-	    SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
-		    VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+	{
+		.image_id = BL33_IMAGE_ID,
+		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
 # ifdef PRELOADED_BL33_BASE
-	    .ep_info.pc = PRELOADED_BL33_BASE,
+		.ep_info.pc = PRELOADED_BL33_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
 # else
-	    .ep_info.pc = MARVELL_DRAM_BASE,
+		.ep_info.pc = MARVELL_DRAM_BASE,
 
-	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
-		    VERSION_2, image_info_t, 0),
-	    .image_info.image_base = MARVELL_DRAM_BASE,
-	    .image_info.image_max_size = MARVELL_DRAM_SIZE,
+		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+			VERSION_2, image_info_t, 0),
+		.image_info.image_base = MARVELL_DRAM_BASE,
+		.image_info.image_max_size = MARVELL_DRAM_SIZE,
 # endif /* PRELOADED_BL33_BASE */
 
-	    .next_handoff_image_id = INVALID_IMAGE_ID,
-    }
+		.next_handoff_image_id = INVALID_IMAGE_ID,
+	}
 #endif /* EL3_PAYLOAD_BASE */
 };