diff --git a/plat/ti/k3/board/j784s4/board.mk b/plat/ti/k3/board/j784s4/board.mk
new file mode 100644
index 0000000..92433ab
--- /dev/null
+++ b/plat/ti/k3/board/j784s4/board.mk
@@ -0,0 +1,24 @@
+#
+# Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+BL32_BASE ?= 0x9e800000
+$(eval $(call add_define,BL32_BASE))
+
+PRELOADED_BL33_BASE ?= 0x80080000
+$(eval $(call add_define,PRELOADED_BL33_BASE))
+
+K3_HW_CONFIG_BASE ?= 0x82000000
+$(eval $(call add_define,K3_HW_CONFIG_BASE))
+
+# Define sec_proxy usage as the full prioritized communication scheme
+K3_SEC_PROXY_LITE	:=	0
+$(eval $(call add_define,K3_SEC_PROXY_LITE))
+
+# System coherency is managed in hardware
+USE_COHERENT_MEM	:=	1
+
+PLAT_INCLUDES		+=	\
+				-Iplat/ti/k3/board/j784s4/include	\
diff --git a/plat/ti/k3/board/j784s4/include/board_def.h b/plat/ti/k3/board/j784s4/include/board_def.h
new file mode 100644
index 0000000..c2debc7
--- /dev/null
+++ b/plat/ti/k3/board/j784s4/include/board_def.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_DEF_H
+#define BOARD_DEF_H
+
+#include <lib/utils_def.h>
+
+/* The ports must be in order and contiguous */
+#define K3_CLUSTER0_CORE_COUNT		U(4)
+#define K3_CLUSTER1_CORE_COUNT		U(4)
+#define K3_CLUSTER2_CORE_COUNT		U(0)
+#define K3_CLUSTER3_CORE_COUNT		U(0)
+/*
+ * This RAM will be used for the bootloader including code, bss, and stacks.
+ * It may need to be increased if BL31 grows in size.
+ *
+ * The link addresses are determined by SEC_SRAM_BASE + offset.
+ * When ENABLE_PIE is set, the TF images can be loaded anywhere, so
+ * SEC_SRAM_BASE is really arbitrary.
+ *
+ * When ENABLE_PIE is unset, SEC_SRAM_BASE should be chosen so that
+ * it matches to the physical address where BL31 is loaded, that is,
+ * SEC_SRAM_BASE should be the base address of the RAM region.
+ *
+ * Lets make things explicit by mapping SRAM_BASE to 0x0 since ENABLE_PIE is
+ * defined as default for our platform.
+ */
+#define SEC_SRAM_BASE			UL(0x00000000) /* PIE remapped on fly */
+#define SEC_SRAM_SIZE			UL(0x00020000) /* 128k */
+
+#define PLAT_MAX_OFF_STATE		U(2)
+#define PLAT_MAX_RET_STATE		U(1)
+
+#define PLAT_PROC_START_ID		U(32)
+
+#define PLAT_PROC_DEVICE_START_ID	U(202)
+#define PLAT_CLUSTER_DEVICE_START_ID	U(198)
+
+#endif /* BOARD_DEF_H */