feat(layerscape): add soc helper macro definition for chassis 3
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I27b3a1f597de84dc2a007798e54eb919c877281a
diff --git a/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
new file mode 100644
index 0000000..8e68367
--- /dev/null
+++ b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef SOC_DEFAULT_HELPER_MACROS_H
+#define SOC_DEFAULT_HELPER_MACROS_H
+
+#ifdef NXP_OCRAM_TZPC_ADDR
+#define TZPC_BLOCK_SIZE 0x1000
+#endif
+
+/* Reset block register offsets */
+#ifdef NXP_RESET_ADDR
+
+/* Register Offset */
+#define RST_RSTCR_OFFSET 0x0
+#define RST_RSTRQMR1_OFFSET 0x10
+#define RST_RSTRQSR1_OFFSET 0x18
+#define BRR_OFFSET 0x60
+
+/* helper macros */
+#define RSTRQMR_RPTOE_MASK (1 << 19)
+#endif /* NXP_RESET_ADDR */
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8
+#define PoS_CONTROL_REG_OFFSET 0x0
+#define POS_EARLY_WR_COMP_EN 0x20
+#define HNI_POS_EN 0x01
+#define POS_TERMINATE_BARRIERS 0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES 0x200
+#define ENABLE_ERR_SIGNAL_TO_MN 0x4
+#define ENABLE_RESERVE_BIT53 0x400
+#define ENABLE_WUO 0x10
+
+#define PORT_S0_CTRL_REG_RNI 0x010
+#define PORT_S1_CTRL_REG_RNI 0x110
+#define PORT_S2_CTRL_REG_RNI 0x210
+#define ENABLE_FORCE_RD_QUO 0x20
+#define QOS_SETTING 0x00FF000C
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET 0x0
+#define EPU_EPIMCR10_OFFSET 0x128
+#define EPU_EPCTR10_OFFSET 0xa28
+#define EPU_EPCCR10_OFFSET 0x828
+#ifndef EPU_EPCCR10_VAL
+#define EPU_EPCCR10_VAL 0xb2800000
+#endif
+#define EPU_EPIMCR10_VAL 0xba000000
+#define EPU_EPCTR10_VAL 0x0
+#define EPU_EPGCR_VAL (1 << 31)
+
+#ifdef NXP_CCN_ADDR
+#define NXP_CCN_HN_F_1_ADDR 0x04210000
+
+#define CCN_HN_F_SAM_NODEID_MASK 0x7f
+#define CCN_HN_F_SNP_DMN_CTL_OFFSET 0x200
+#define CCN_HN_F_SNP_DMN_CTL_SET_OFFSET 0x210
+#define CCN_HN_F_SNP_DMN_CTL_CLR_OFFSET 0x220
+#define CCN_HN_F_SNP_DMN_CTL_MASK 0x80a00
+#define CCN_HNF_NODE_COUNT 8
+#define CCN_HNF_OFFSET 0x10000
+
+#define SA_AUX_CTRL_REG_OFFSET 0x500
+#define NUM_HNI_NODE 2
+#define CCN_HNI_MEMORY_MAP_SIZE 0x10000
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET 0x8
+#define PoS_CONTROL_REG_OFFSET 0x0
+#define POS_EARLY_WR_COMP_EN 0x20
+#define HNI_POS_EN 0x01
+#define POS_TERMINATE_BARRIERS 0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES 0x200
+#define ENABLE_ERR_SIGNAL_TO_MN 0x4
+#define ENABLE_RESERVE_BIT53 0x400
+#define ENABLE_WUO 0x10
+#endif
+
+/* reset register bit */
+#define RSTRQMR_RPTOE_MASK (1 << 19)
+
+/* secmon register offsets and bitfields */
+#define SECMON_HPCOMR_OFFSET 0x4
+#define SECMON_HPCOMR_NPSWAEN 0x80000000
+
+/* Secure-Register-File register offsets and bit masks */
+#ifdef NXP_RST_ADDR
+/* Register Offset */
+#define CORE_HOLD_OFFSET 0x140
+#endif
+
+#define DCFG_SBEESR2_ADDR 0x00100534
+#define DCFG_MBEESR2_ADDR 0x00100544
+/* SBEESR and MBEESR bit mask */
+#define OCRAM_EESR_MASK 0x00000008
+
+#endif /* SOC_DEFAULT_HELPER_MACROS_H */