ARM Platforms: Migrate to new BL handover interface

This patch migrates the ARM Standard platforms to the new BL
handover interface. The arm_blx_early_platform_setup() functions
are also modified to take in 4 arguments. The `ARM_BL31_PLAT_PARAM_VAL`
value passed to BL31 from BL2 is now in arg3 in preparation of dynamic
configuration arguments.

Change-Id: I33e8e61325a19e7a7127b1ff203c3b86921bf153
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
diff --git a/plat/arm/board/fvp/fvp_bl2_setup.c b/plat/arm/board/fvp/fvp_bl2_setup.c
index e9c4ab5..4315c1f 100644
--- a/plat/arm/board/fvp/fvp_bl2_setup.c
+++ b/plat/arm/board/fvp/fvp_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -12,10 +12,9 @@
 #include "fvp_def.h"
 #include "fvp_private.h"
 
-
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((meminfo_t *)arg1);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/board/fvp/fvp_bl31_setup.c b/plat/arm/board/fvp/fvp_bl31_setup.c
index 181c923..640dea1 100644
--- a/plat/arm/board/fvp/fvp_bl31_setup.c
+++ b/plat/arm/board/fvp/fvp_bl31_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -9,15 +9,10 @@
 #include <smmu_v3.h>
 #include "fvp_private.h"
 
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
-#else
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
-#endif
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
 {
-	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
index b924636..6cced4d 100644
--- a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
+++ b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,10 +7,10 @@
 #include <plat_arm.h>
 #include "../fvp_private.h"
 
-void sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_sp_min_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
diff --git a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
index 4376119..d3490eb 100644
--- a/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
+++ b/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c
@@ -68,7 +68,7 @@
 	    .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
 		    DISABLE_ALL_EXCEPTIONS),
 #if DEBUG
-	    .ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL,
+	    .ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
 #endif
 
 	    SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 906ed19..14da1fd 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -39,7 +39,7 @@
 CASSERT(BL2_BASE >= (ARM_BL_RAM_BASE + BL1_MEMINFO_OFFSET), assert_bl2_base_overflows);
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl2_early_platform_setup
+#pragma weak bl2_early_platform_setup2
 #pragma weak bl2_platform_setup
 #pragma weak bl2_plat_arch_setup
 #pragma weak bl2_plat_sec_mem_layout
@@ -169,7 +169,7 @@
 struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
 {
 #if DEBUG
-	bl31_params_mem.bl31_ep_info.args.arg1 = ARM_BL31_PLAT_PARAM_VAL;
+	bl31_params_mem.bl31_ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL;
 #endif
 
 	return &bl31_params_mem.bl31_ep_info;
@@ -194,9 +194,9 @@
 	plat_arm_io_setup();
 }
 
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((meminfo_t *)arg1);
 	generic_delay_timer_init();
 }
 
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index 8fba80b..963c4d2 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -26,7 +26,7 @@
 
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak bl31_early_platform_setup
+#pragma weak bl31_early_platform_setup2
 #pragma weak bl31_platform_setup
 #pragma weak bl31_plat_arch_setup
 #pragma weak bl31_plat_get_next_image_ep_info
@@ -64,11 +64,11 @@
  * we are guaranteed to pick up good data.
  ******************************************************************************/
 #if LOAD_IMAGE_V2
-void arm_bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
+void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2)
 #else
-void arm_bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
+void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_config,
+				uintptr_t hw_config, void *plat_params_from_bl2)
 #endif
 {
 	/* Initialize the console to provide early debug support */
@@ -152,6 +152,10 @@
 	assert(from_bl2->h.type == PARAM_BL31);
 	assert(from_bl2->h.version >= VERSION_1);
 
+	/* Dynamic Config is not supported for LOAD_IMAGE_V1 */
+	assert(soc_fw_config == 0);
+	assert(hw_config == 0);
+
 	/*
 	 * Copy BL32 (if populated by BL2) and BL33 entry point information.
 	 * They are stored in Secure RAM, in BL2's address space.
@@ -164,15 +168,10 @@
 #endif /* RESET_TO_BL31 */
 }
 
-#if LOAD_IMAGE_V2
-void bl31_early_platform_setup(void *from_bl2,
-				void *plat_params_from_bl2)
-#else
-void bl31_early_platform_setup(bl31_params_t *from_bl2,
-				void *plat_params_from_bl2)
-#endif
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
 {
-	arm_bl31_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/*
 	 * Initialize Interconnect for this cluster during cold boot.
diff --git a/plat/arm/common/sp_min/arm_sp_min_setup.c b/plat/arm/common/sp_min/arm_sp_min_setup.c
index c5408c8..1776d46 100644
--- a/plat/arm/common/sp_min/arm_sp_min_setup.c
+++ b/plat/arm/common/sp_min/arm_sp_min_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -18,7 +18,7 @@
 static entry_point_info_t bl33_image_ep_info;
 
 /* Weak definitions may be overridden in specific ARM standard platform */
-#pragma weak sp_min_early_platform_setup
+#pragma weak sp_min_early_platform_setup2
 #pragma weak sp_min_platform_setup
 #pragma weak sp_min_plat_arch_setup
 
@@ -48,8 +48,8 @@
 /*******************************************************************************
  * Perform early platform setup.
  ******************************************************************************/
-void arm_sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void arm_sp_min_early_platform_setup(void *from_bl2, uintptr_t tos_fw_config,
+			uintptr_t hw_config, void *plat_params_from_bl2)
 {
 	/* Initialize the console to provide early debug support */
 	console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
@@ -105,10 +105,10 @@
 
 }
 
-void sp_min_early_platform_setup(void *from_bl2,
-		void *plat_params_from_bl2)
+void sp_min_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_sp_min_early_platform_setup(from_bl2, plat_params_from_bl2);
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/*
 	 * Initialize Interconnect for this cluster during cold boot.
diff --git a/plat/arm/css/common/css_bl2_setup.c b/plat/arm/css/common/css_bl2_setup.c
index b4aafd4..33e7b2e 100644
--- a/plat/arm/css/common/css_bl2_setup.c
+++ b/plat/arm/css/common/css_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -60,9 +60,10 @@
 
 static unsigned int scp_boot_config;
 
-void bl2_early_platform_setup(meminfo_t *mem_layout)
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
 {
-	arm_bl2_early_platform_setup(mem_layout);
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
 
 	/* Save SCP Boot config before it gets overwritten by SCP_BL2 loading */
 	scp_boot_config = mmio_read_32(SCP_BOOT_CFG_ADDR);