poplar: Fix format of documentation
The document was being rendered incorrectly.
Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/docs/plat/poplar.rst b/docs/plat/poplar.rst
index d7f1fe0..0129478 100644
--- a/docs/plat/poplar.rst
+++ b/docs/plat/poplar.rst
@@ -11,6 +11,8 @@
It supports a premium user experience with up to H.265 HEVC decoding of 4K
video at 60 frames per second.
+::
+
SOC Hisilicon Hi3798CV200
CPU Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
@@ -28,6 +30,8 @@
binary whose main role is to change the processor state to 64bit mode. This
must happen prior invoking the arm trusted firmware:
+::
+
l-loader --> arm_trusted_firmware --> u-boot
How to build
@@ -54,10 +58,16 @@
- Prepare the AARCH64 toolchain.
- Build u-boot using poplar_defconfig
+
+.. code:: bash
+
make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
- Build atf providing the previously generated u-boot.bin as the BL33 image
+
+.. code:: bash
+
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none PLAT=poplar
BL33=u-boot.bin
@@ -81,85 +91,86 @@
Boot trace
==========
-Bootrom start
-Boot Media: eMMC
-Decrypt auxiliary code ...OK
+::
-lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
+ Bootrom start
+ Boot Media: eMMC
+ Decrypt auxiliary code ...OK
-Entry boot auxiliary code
+ lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
-Auxiliary code - v1.00
-DDR code - V1.1.2 20160205
-Build: Mar 24 2016 - 17:09:44
-Reg Version: v134
-Reg Time: 2016/03/18 09:44:55
-Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
+ Entry boot auxiliary code
-Boot auxiliary code success
-Bootrom success
+ Auxiliary code - v1.00
+ DDR code - V1.1.2 20160205
+ Build: Mar 24 2016 - 17:09:44
+ Reg Version: v134
+ Reg Time: 2016/03/18 09:44:55
+ Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
-LOADER: Switched to aarch64 mode
-LOADER: Entering ARM TRUSTED FIRMWARE
-LOADER: CPU0 executes at 0x000ce000
+ Boot auxiliary code success
+ Bootrom success
-INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
-NOTICE: Booting Trusted Firmware
-NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE: BL1: Built : 17:51:33, Apr 30 2017
-INFO: BL1: RAM 0xe1000 - 0xe7000
-INFO: BL1: Loading BL2
-INFO: Loading image id=1 at address 0xe9000
-INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
-NOTICE: BL1: Booting BL2
-INFO: Entry point address = 0xe9000
-INFO: SPSR = 0x3c5
-NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE: BL2: Built : 17:51:33, Apr 30 2017
-INFO: BL2: Loading BL31
-INFO: Loading image id=3 at address 0x129000
-INFO: Image id=3 loaded at address 0x129000, size = 0x8038
-INFO: BL2: Loading BL33
-INFO: Loading image id=5 at address 0x37000000
-INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
-NOTICE: BL1: Booting BL31
-INFO: Entry point address = 0x129000
-INFO: SPSR = 0x3cd
-INFO: Boot bl33 from 0x37000000 for 364311 Bytes
-NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
-NOTICE: BL31: Built : 17:51:33, Apr 30 2017
-INFO: BL31: Initializing runtime services
-INFO: BL31: Preparing for EL3 exit to normal world
-INFO: Entry point address = 0x37000000
-INFO: SPSR = 0x3c9
+ LOADER: Switched to aarch64 mode
+ LOADER: Entering ARM TRUSTED FIRMWARE
+ LOADER: CPU0 executes at 0x000ce000
+ INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
+ NOTICE: Booting Trusted Firmware
+ NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
+ NOTICE: BL1: Built : 17:51:33, Apr 30 2017
+ INFO: BL1: RAM 0xe1000 - 0xe7000
+ INFO: BL1: Loading BL2
+ INFO: Loading image id=1 at address 0xe9000
+ INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
+ NOTICE: BL1: Booting BL2
+ INFO: Entry point address = 0xe9000
+ INFO: SPSR = 0x3c5
+ NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
+ NOTICE: BL2: Built : 17:51:33, Apr 30 2017
+ INFO: BL2: Loading BL31
+ INFO: Loading image id=3 at address 0x129000
+ INFO: Image id=3 loaded at address 0x129000, size = 0x8038
+ INFO: BL2: Loading BL33
+ INFO: Loading image id=5 at address 0x37000000
+ INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
+ NOTICE: BL1: Booting BL31
+ INFO: Entry point address = 0x129000
+ INFO: SPSR = 0x3cd
+ INFO: Boot bl33 from 0x37000000 for 364311 Bytes
+ NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
+ NOTICE: BL31: Built : 17:51:33, Apr 30 2017
+ INFO: BL31: Initializing runtime services
+ INFO: BL31: Preparing for EL3 exit to normal world
+ INFO: Entry point address = 0x37000000
+ INFO: SPSR = 0x3c9
-U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
-Model: HiSilicon Poplar Development Board
-BOARD: Hisilicon HI3798cv200 Poplar
-DRAM: 1 GiB
-MMC: Hisilicon DWMMC: 0
-In: serial@f8b00000
-Out: serial@f8b00000
-Err: serial@f8b00000
-Net: Net Initialization Skipped
-No ethernet found.
+ U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
-Hit any key to stop autoboot: 0
-starting USB...
-USB0: USB EHCI 1.00
-scanning bus 0 for devices... 1 USB Device(s) found
-USB1: USB EHCI 1.00
-scanning bus 1 for devices... 4 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- scanning usb for ethernet devices... 1 Ethernet Device(s) found
+ Model: HiSilicon Poplar Development Board
+ BOARD: Hisilicon HI3798cv200 Poplar
+ DRAM: 1 GiB
+ MMC: Hisilicon DWMMC: 0
+ In: serial@f8b00000
+ Out: serial@f8b00000
+ Err: serial@f8b00000
+ Net: Net Initialization Skipped
+ No ethernet found.
-USB device 0:
- Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
- Type: Removable Hard Disk
- Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
-... is now current device
-Scanning usb 0:1...
-=>
+ Hit any key to stop autoboot: 0
+ starting USB...
+ USB0: USB EHCI 1.00
+ scanning bus 0 for devices... 1 USB Device(s) found
+ USB1: USB EHCI 1.00
+ scanning bus 1 for devices... 4 USB Device(s) found
+ scanning usb for storage devices... 1 Storage Device(s) found
+ scanning usb for ethernet devices... 1 Ethernet Device(s) found
+ USB device 0:
+ Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
+ Type: Removable Hard Disk
+ Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
+ ... is now current device
+ Scanning usb 0:1...
+ =>