Add Test Secure Payload (BL3-2) image
This patch adds a simple TSP as the BL3-2 image. The secure payload
executes in S-EL1. It paves the way for the addition of the TSP
dispatcher runtime service to BL3-1. The TSP and the dispatcher service
will serve as an example of the runtime firmware's ability to toggle
execution between the non-secure and secure states in response to SMC
request from the non-secure state. The TSP will be replaced by a
Trusted OS in a real system.
The TSP also exports a set of handlers which should be called in
response to a PSCI power management event e.g a cpu being suspended or
turned off. For now it runs out of Secure DRAM on the ARM FVP port and
will be moved to Secure SRAM later. The default translation table setup
code assumes that the caller is executing out of secure SRAM. Hence the
TSP exports its own translation table setup function.
The TSP only services Fast SMCs, is non-reentrant and non-interruptible.
It does arithmetic operations on two sets of four operands, one set
supplied by the non-secure client, and the other supplied by the TSP
dispatcher in EL3. It returns the result according to the Secure Monitor
Calling convention standard.
This TSP has two functional entry points:
- An initial, one-time entry point through which the TSP is initialized
and prepares for receiving further requests from secure
monitor/dispatcher
- A fast SMC service entry point through which the TSP dispatcher
requests secure services on behalf of the non-secure client
Change-Id: I24377df53399307e2560a025eb2c82ce98ab3931
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
diff --git a/plat/fvp/bl32_plat_setup.c b/plat/fvp/bl32_plat_setup.c
new file mode 100644
index 0000000..ba418fd
--- /dev/null
+++ b/plat/fvp/bl32_plat_setup.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <assert.h>
+#include <arch_helpers.h>
+#include <platform.h>
+#include <bl32.h>
+#include <bl_common.h>
+#include <console.h>
+
+/*******************************************************************************
+ * Declarations of linker defined symbols which will help us find the layout
+ * of trusted SRAM
+ ******************************************************************************/
+extern unsigned long __RO_START__;
+extern unsigned long __RO_END__;
+
+extern unsigned long __COHERENT_RAM_START__;
+extern unsigned long __COHERENT_RAM_END__;
+
+/*
+ * The next 2 constants identify the extents of the code & RO data region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned. It is the responsibility of the linker script to ensure that
+ * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
+ */
+#define BL32_RO_BASE (unsigned long)(&__RO_START__)
+#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
+
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned. It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
+ * page-aligned addresses.
+ */
+#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+
+/* Data structure which holds the extents of the trusted SRAM for BL32 */
+static meminfo bl32_tzdram_layout
+__attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
+ section("tzfw_coherent_mem")));
+
+meminfo *bl32_plat_sec_mem_layout(void)
+{
+ return &bl32_tzdram_layout;
+}
+
+/*******************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that's at BL32's disposal.
+ * Initialize the BL32 data structure with the memory extends
+ ******************************************************************************/
+void bl32_early_platform_setup(meminfo *mem_layout,
+ void *data)
+{
+ /* Setup the BL32 memory layout */
+ bl32_tzdram_layout.total_base = mem_layout->total_base;
+ bl32_tzdram_layout.total_size = mem_layout->total_size;
+ bl32_tzdram_layout.free_base = mem_layout->free_base;
+ bl32_tzdram_layout.free_size = mem_layout->free_size;
+ bl32_tzdram_layout.attr = mem_layout->attr;
+ bl32_tzdram_layout.next = 0;
+
+ return;
+}
+
+/*******************************************************************************
+ * Perform platform specific setup
+ ******************************************************************************/
+void bl32_platform_setup()
+{
+ /*
+ * Initialize a different console than already in use to display
+ * messages from TSP
+ */
+ console_init(PL011_UART1_BASE);
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only intializes the MMU
+ ******************************************************************************/
+void bl32_plat_arch_setup()
+{
+ configure_mmu(&bl32_tzdram_layout,
+ BL32_RO_BASE,
+ BL32_RO_LIMIT,
+ BL32_COHERENT_RAM_BASE,
+ BL32_COHERENT_RAM_LIMIT);
+}