diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
index 0fa0497..b9d1ec3 100644
--- a/drivers/marvell/mochi/cp110_setup.c
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -12,6 +12,7 @@
 #include <drivers/marvell/amb_adec.h>
 #include <drivers/marvell/iob.h>
 #include <drivers/marvell/mochi/cp110_setup.h>
+#include <drivers/rambus/trng_ip_76.h>
 
 #include <plat_marvell.h>
 
@@ -105,6 +106,11 @@
 #define MVEBU_RTC_READ_OUTPUT_DELAY_MASK		0xFFFF
 #define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT		0x1F
 
+/*******************************************************************************
+ * TRNG Configuration
+ ******************************************************************************/
+#define MVEBU_TRNG_BASE					(0x760000)
+
 enum axi_attr {
 	AXI_ADUNIT_ATTR = 0,
 	AXI_COMUNIT_ATTR,
@@ -378,6 +384,20 @@
 	init_amb_adec(base);
 }
 
+static void cp110_trng_init(uintptr_t base)
+{
+	static bool done;
+	int ret;
+
+	if (!done) {
+		ret = eip76_rng_probe(base + MVEBU_TRNG_BASE);
+		if (ret != 0) {
+			ERROR("Failed to init TRNG @ 0x%lx\n", base);
+			return;
+		}
+		done = true;
+	}
+}
 void cp110_init(uintptr_t cp110_base, uint32_t stream_id)
 {
 	INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
@@ -405,6 +425,9 @@
 
 	/* Reset RTC if needed */
 	cp110_rtc_init(cp110_base);
+
+	/* TRNG init - for CP0 only */
+	cp110_trng_init(cp110_base);
 }
 
 /* Do the minimal setup required to configure the CP in BLE */
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 63cfce2..8a463ea 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -114,7 +114,8 @@
 				$(MARVELL_DRV_BASE)/cache_llc.c	\
 				$(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
 				$(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
-				$(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c
+				$(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c \
+				drivers/rambus/trng_ip_76.c
 
 BL31_PORTING_SOURCES	:=	$(BOARD_DIR)/board/marvell_plat_config.c
 
diff --git a/plat/marvell/armada/common/mrvl_sip_svc.c b/plat/marvell/armada/common/mrvl_sip_svc.c
index 0291024..64187fb 100644
--- a/plat/marvell/armada/common/mrvl_sip_svc.c
+++ b/plat/marvell/armada/common/mrvl_sip_svc.c
@@ -9,6 +9,7 @@
 #include <common/runtime_svc.h>
 #include <drivers/marvell/cache_llc.h>
 #include <drivers/marvell/mochi/ap_setup.h>
+#include <drivers/rambus/trng_ip_76.h>
 #include <lib/smccc.h>
 
 #include <marvell_plat_priv.h>
@@ -37,6 +38,9 @@
 #define MV_SIP_PMU_IRQ_ENABLE	0x82000012
 #define MV_SIP_PMU_IRQ_DISABLE	0x82000013
 
+/* TRNG */
+#define MV_SIP_RNG_64		0xC200FF11
+
 #define MAX_LANE_NR		6
 #define MVEBU_COMPHY_OFFSET	0x441000
 #define MVEBU_CP_BASE_MASK	(~0xffffff)
@@ -68,6 +72,7 @@
 			       u_register_t flags)
 {
 	u_register_t ret;
+	uint32_t w2[2] = {0, 0};
 	int i;
 
 	debug("%s: got SMC (0x%x) x1 0x%lx, x2 0x%lx, x3 0x%lx\n",
@@ -131,7 +136,9 @@
 		mvebu_pmu_interrupt_disable();
 		SMC_RET1(handle, 0);
 #endif
-
+	case MV_SIP_RNG_64:
+		ret = eip76_rng_get_random((uint8_t *)&w2, 4 * (x1 % 2 + 1));
+		SMC_RET3(handle, ret, w2[0], w2[1]);
 	default:
 		ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
 		SMC_RET1(handle, SMC_UNK);