plat/marvell/armada/a8k: support HW RNG by SMC
Add initialization for TRNG-IP-76 driver and support SMC call
0xC200FF11 used for reading HW RNG value by secondary bootloader
software for KASLR support.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I1d644f67457b28d347523f8a7bfc4eacc45cba68
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/32688
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 63cfce2..8a463ea 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -114,7 +114,8 @@
$(MARVELL_DRV_BASE)/cache_llc.c \
$(MARVELL_DRV_BASE)/comphy/phy-comphy-cp110.c \
$(MARVELL_DRV_BASE)/mc_trustzone/mc_trustzone.c \
- $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c
+ $(MARVELL_DRV_BASE)/mg_conf_cm3/mg_conf_cm3.c \
+ drivers/rambus/trng_ip_76.c
BL31_PORTING_SOURCES := $(BOARD_DIR)/board/marvell_plat_config.c
diff --git a/plat/marvell/armada/common/mrvl_sip_svc.c b/plat/marvell/armada/common/mrvl_sip_svc.c
index 0291024..64187fb 100644
--- a/plat/marvell/armada/common/mrvl_sip_svc.c
+++ b/plat/marvell/armada/common/mrvl_sip_svc.c
@@ -9,6 +9,7 @@
#include <common/runtime_svc.h>
#include <drivers/marvell/cache_llc.h>
#include <drivers/marvell/mochi/ap_setup.h>
+#include <drivers/rambus/trng_ip_76.h>
#include <lib/smccc.h>
#include <marvell_plat_priv.h>
@@ -37,6 +38,9 @@
#define MV_SIP_PMU_IRQ_ENABLE 0x82000012
#define MV_SIP_PMU_IRQ_DISABLE 0x82000013
+/* TRNG */
+#define MV_SIP_RNG_64 0xC200FF11
+
#define MAX_LANE_NR 6
#define MVEBU_COMPHY_OFFSET 0x441000
#define MVEBU_CP_BASE_MASK (~0xffffff)
@@ -68,6 +72,7 @@
u_register_t flags)
{
u_register_t ret;
+ uint32_t w2[2] = {0, 0};
int i;
debug("%s: got SMC (0x%x) x1 0x%lx, x2 0x%lx, x3 0x%lx\n",
@@ -131,7 +136,9 @@
mvebu_pmu_interrupt_disable();
SMC_RET1(handle, 0);
#endif
-
+ case MV_SIP_RNG_64:
+ ret = eip76_rng_get_random((uint8_t *)&w2, 4 * (x1 % 2 + 1));
+ SMC_RET3(handle, ret, w2[0], w2[1]);
default:
ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
SMC_RET1(handle, SMC_UNK);