refactor: moved drivers hdr files to include/drivers/nxp
NXP drivers header files are moved:
- from: drivers/nxp/<xx>/*.h
- to : include/drivers/nxp/<xx>/*.h
To accommodate these changes each drivers makefiles
drivers/nxp/<xx>/xx.mk, are updated.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I3979c509724d87e3d631a03dbafda1ee5ef07d21
diff --git a/include/drivers/nxp/sd/sd_mmc.h b/include/drivers/nxp/sd/sd_mmc.h
new file mode 100644
index 0000000..32b41f1
--- /dev/null
+++ b/include/drivers/nxp/sd/sd_mmc.h
@@ -0,0 +1,337 @@
+/*
+ * Copyright (c) 2015, 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SD_MMC_H
+#define SD_MMC_H
+
+#include <lib/mmio.h>
+
+/* operating freq */
+#define CARD_IDENTIFICATION_FREQ 400000
+#define SD_SS_25MHZ 20000000
+#define SD_HS_50MHZ 40000000
+#define MMC_SS_20MHZ 15000000
+#define MMC_HS_26MHZ 20000000
+#define MMC_HS_52MHZ 40000000
+
+/* Need to check this value ? */
+#define MAX_PLATFORM_CLOCK 800000000
+
+/* eSDHC system control register defines */
+#define ESDHC_SYSCTL_DTOCV(t) (((t) & 0xF) << 16)
+#define ESDHC_SYSCTL_SDCLKFS(f) (((f) & 0xFF) << 8)
+#define ESDHC_SYSCTL_DVS(d) (((d) & 0xF) << 4)
+#define ESDHC_SYSCTL_SDCLKEN (0x00000008)
+#define ESDHC_SYSCTL_RSTA (0x01000000)
+
+/* Data timeout counter value. SDHC_CLK x 227 */
+#define TIMEOUT_COUNTER_SDCLK_2_27 0xE
+#define ESDHC_SYSCTL_INITA 0x08000000
+
+/* eSDHC interrupt status enable register defines */
+#define ESDHC_IRQSTATEN_CINS 0x00000040
+#define ESDHC_IRQSTATEN_BWR 0x00000010
+
+/* eSDHC interrupt status register defines */
+#define ESDHC_IRQSTAT_DMAE (0x10000000)
+#define ESDHC_IRQSTAT_AC12E (0x01000000)
+#define ESDHC_IRQSTAT_DEBE (0x00400000)
+#define ESDHC_IRQSTAT_DCE (0x00200000)
+#define ESDHC_IRQSTAT_DTOE (0x00100000)
+#define ESDHC_IRQSTAT_CIE (0x00080000)
+#define ESDHC_IRQSTAT_CEBE (0x00040000)
+#define ESDHC_IRQSTAT_CCE (0x00020000)
+#define ESDHC_IRQSTAT_CTOE (0x00010000)
+#define ESDHC_IRQSTAT_CINT (0x00000100)
+#define ESDHC_IRQSTAT_CRM (0x00000080)
+#define ESDHC_IRQSTAT_CINS (0x00000040)
+#define ESDHC_IRQSTAT_BRR (0x00000020)
+#define ESDHC_IRQSTAT_BWR (0x00000010)
+#define ESDHC_IRQSTAT_DINT (0x00000008)
+#define ESDHC_IRQSTAT_BGE (0x00000004)
+#define ESDHC_IRQSTAT_TC (0x00000002)
+#define ESDHC_IRQSTAT_CC (0x00000001)
+#define ESDHC_IRQSTAT_CMD_ERR (ESDHC_IRQSTAT_CIE |\
+ ESDHC_IRQSTAT_CEBE |\
+ ESDHC_IRQSTAT_CCE)
+#define ESDHC_IRQSTAT_DATA_ERR (ESDHC_IRQSTAT_DEBE |\
+ ESDHC_IRQSTAT_DCE |\
+ ESDHC_IRQSTAT_DTOE)
+#define ESDHC_IRQSTAT_CLEAR_ALL (0xFFFFFFFF)
+
+/* eSDHC present state register defines */
+#define ESDHC_PRSSTAT_CLSL 0x00800000
+#define ESDHC_PRSSTAT_WPSPL 0x00080000
+#define ESDHC_PRSSTAT_CDPL 0x00040000
+#define ESDHC_PRSSTAT_CINS 0x00010000
+#define ESDHC_PRSSTAT_BREN 0x00000800
+#define ESDHC_PRSSTAT_BWEN 0x00000400
+#define ESDHC_PRSSTAT_RTA 0x00000200
+#define ESDHC_PRSSTAT_WTA 0x00000100
+#define ESDHC_PRSSTAT_SDOFF 0x00000080
+#define ESDHC_PRSSTAT_PEROFF 0x00000040
+#define ESDHC_PRSSTAT_HCKOFF 0x00000020
+#define ESDHC_PRSSTAT_IPGOFF 0x00000010
+#define ESDHC_PRSSTAT_DLA 0x00000004
+#define ESDHC_PRSSTAT_CDIHB 0x00000002
+#define ESDHC_PRSSTAT_CIHB 0x00000001
+
+/* eSDHC protocol control register defines */
+#define ESDHC_PROCTL_EMODE_LE 0x00000020
+#define ESDHC_PROCTL_DTW_1BIT 0x00000000
+#define ESDHC_PROCTL_DTW_4BIT 0x00000002
+#define ESDHC_PROCTL_DTW_8BIT 0x00000004
+
+/* Watermark Level Register (WML) */
+#define ESDHC_WML_RD_WML(w) ((w) & 0x7F)
+#define ESDHC_WML_WR_WML(w) (((w) & 0x7F) << 16)
+#define ESDHC_WML_RD_BRST(w) (((w) & 0xF) << 8)
+#define ESDHC_WML_WR_BRST(w) (((w) & 0xF) << 24)
+#define ESDHC_WML_WR_BRST_MASK (0x0F000000)
+#define ESDHC_WML_RD_BRST_MASK (0x00000F00)
+#define ESDHC_WML_RD_WML_MASK (0x0000007F)
+#define ESDHC_WML_WR_WML_MASK (0x007F0000)
+#define WML_512_BYTES (0x0)
+#define BURST_128_BYTES (0x0)
+
+/* eSDHC control register define */
+#define ESDHC_DCR_SNOOP 0x00000040
+
+/* ESDHC Block attributes register */
+#define ESDHC_BLKATTR_BLKCNT(c) (((c) & 0xffff) << 16)
+#define ESDHC_BLKATTR_BLKSZE(s) ((s) & 0xfff)
+
+/* Transfer Type Register */
+#define ESDHC_XFERTYP_CMD(c) (((c) & 0x3F) << 24)
+#define ESDHC_XFERTYP_CMDTYP_NORMAL (0x0)
+#define ESDHC_XFERTYP_CMDTYP_SUSPEND (0x00400000)
+#define ESDHC_XFERTYP_CMDTYP_RESUME (0x00800000)
+#define ESDHC_XFERTYP_CMDTYP_ABORT (0x00C00000)
+#define ESDHC_XFERTYP_DPSEL (0x00200000)
+#define ESDHC_XFERTYP_CICEN (0x00100000)
+#define ESDHC_XFERTYP_CCCEN (0x00080000)
+#define ESDHC_XFERTYP_RSPTYP_NONE (0x0)
+#define ESDHC_XFERTYP_RSPTYP_136 (0x00010000)
+#define ESDHC_XFERTYP_RSPTYP_48 (0x00020000)
+#define ESDHC_XFERTYP_RSPTYP_48_BUSY (0x00030000)
+#define ESDHC_XFERTYP_MSBSEL (0x00000020)
+#define ESDHC_XFERTYP_DTDSEL (0x00000010)
+#define ESDHC_XFERTYP_AC12EN (0x00000004)
+#define ESDHC_XFERTYP_BCEN (0x00000002)
+#define ESDHC_XFERTYP_DMAEN (0x00000001)
+
+#define MMC_VDD_HIGH_VOLTAGE 0x00000100
+
+/* command index */
+#define CMD0 0
+#define CMD1 1
+#define CMD2 2
+#define CMD3 3
+#define CMD5 5
+#define CMD6 6
+#define CMD7 7
+#define CMD8 8
+#define CMD9 9
+#define CMD12 12
+#define CMD13 13
+#define CMD14 14
+#define CMD16 16
+#define CMD17 17
+#define CMD18 18
+#define CMD19 19
+#define CMD24 24
+#define CMD41 41
+#define CMD42 42
+#define CMD51 51
+#define CMD55 55
+#define CMD56 56
+#define ACMD6 CMD6
+#define ACMD13 CMD13
+#define ACMD41 CMD41
+#define ACMD42 CMD42
+#define ACMD51 CMD51
+
+/* commands abbreviations */
+#define CMD_GO_IDLE_STATE CMD0
+#define CMD_MMC_SEND_OP_COND CMD1
+#define CMD_ALL_SEND_CID CMD2
+#define CMD_SEND_RELATIVE_ADDR CMD3
+#define CMD_SET_DSR CMD4
+#define CMD_SWITCH_FUNC CMD6
+#define CMD_SELECT_CARD CMD7
+#define CMD_DESELECT_CARD CMD7
+#define CMD_SEND_IF_COND CMD8
+#define CMD_MMC_SEND_EXT_CSD CMD8
+#define CMD_SEND_CSD CMD9
+#define CMD_SEND_CID CMD10
+#define CMD_STOP_TRANSMISSION CMD12
+#define CMD_SEND_STATUS CMD13
+#define CMD_BUS_TEST_R CMD14
+#define CMD_GO_INACTIVE_STATE CMD15
+#define CMD_SET_BLOCKLEN CMD16
+#define CMD_READ_SINGLE_BLOCK CMD17
+#define CMD_READ_MULTIPLE_BLOCK CMD18
+#define CMD_WRITE_SINGLE_BLOCK CMD24
+#define CMD_BUS_TEST_W CMD19
+#define CMD_APP_CMD CMD55
+#define CMD_GEN_CMD CMD56
+#define CMD_SET_BUS_WIDTH ACMD6
+#define CMD_SD_STATUS ACMD13
+#define CMD_SD_SEND_OP_COND ACMD41
+#define CMD_SET_CLR_CARD_DETECT ACMD42
+#define CMD_SEND_SCR ACMD51
+
+/* MMC card spec version */
+#define MMC_CARD_VERSION_1_2 0
+#define MMC_CARD_VERSION_1_4 1
+#define MMC_CARD_VERSION_2_X 2
+#define MMC_CARD_VERSION_3_X 3
+#define MMC_CARD_VERSION_4_X 4
+
+/* SD Card Spec Version */
+/* May need to add version 3 here? */
+#define SD_CARD_VERSION_1_0 0
+#define SD_CARD_VERSION_1_10 1
+#define SD_CARD_VERSION_2_0 2
+
+/* card types */
+#define MMC_CARD 0
+#define SD_CARD 1
+#define NOT_SD_CARD MMC_CARD
+
+/* Card rca */
+#define SD_MMC_CARD_RCA 0x1
+#define BLOCK_LEN_512 512
+
+/* card state */
+#define STATE_IDLE 0
+#define STATE_READY 1
+#define STATE_IDENT 2
+#define STATE_STBY 3
+#define STATE_TRAN 4
+#define STATE_DATA 5
+#define STATE_RCV 6
+#define STATE_PRG 7
+#define STATE_DIS 8
+
+/* Card OCR register */
+/* VDD voltage window 1,65 to 1.95 */
+#define MMC_OCR_VDD_165_195 0x00000080
+/* VDD voltage window 2.7-2.8 */
+#define MMC_OCR_VDD_FF8 0x00FF8000
+#define MMC_OCR_CCS 0x40000000/* Card Capacity */
+#define MMC_OCR_BUSY 0x80000000/* busy bit */
+#define SD_OCR_HCS 0x40000000/* High capacity host */
+#define MMC_OCR_SECTOR_MODE 0x40000000/* Access Mode as Sector */
+
+/* mmc Switch function */
+#define SET_EXT_CSD_HS_TIMING 0x03B90100/* set High speed */
+
+/* check supports switching or not */
+#define SD_SWITCH_FUNC_CHECK_MODE 0x00FFFFF1
+#define SD_SWITCH_FUNC_SWITCH_MODE 0x80FFFFF1/* switch */
+#define SD_SWITCH_FUNC_HIGH_SPEED 0x02/* HIGH SPEED FUNC */
+#define SWITCH_ERROR 0x00000080
+
+/* errors in sending commands */
+#define RESP_TIMEOUT 0x1
+#define COMMAND_ERROR 0x2
+/* error in response */
+#define R1_ERROR (1 << 19)
+#define R1_CURRENT_STATE(x) (((x) & 0x00001E00) >> 9)
+
+/* Host Controller Capabilities */
+#define ESDHC_HOSTCAPBLT_DMAS (0x00400000)
+
+
+/* SD/MMC memory map */
+struct esdhc_regs {
+ uint32_t dsaddr; /* dma system address */
+ uint32_t blkattr; /* Block attributes */
+ uint32_t cmdarg; /* Command argument */
+ uint32_t xfertyp; /* Command transfer type */
+ uint32_t cmdrsp[4]; /* Command response0,1,2,3 */
+ uint32_t datport; /* Data buffer access port */
+ uint32_t prsstat; /* Present state */
+ uint32_t proctl; /* Protocol control */
+ uint32_t sysctl; /* System control */
+ uint32_t irqstat; /* Interrupt status */
+ uint32_t irqstaten; /* Interrupt status enable */
+ uint32_t irqsigen; /* Interrupt signal enable */
+ uint32_t autoc12err; /* Auto CMD12 status */
+ uint32_t hostcapblt; /* Host controller capabilities */
+ uint32_t wml; /* Watermark level */
+ uint32_t res1[2];
+ uint32_t fevt; /* Force event */
+ uint32_t res2;
+ uint32_t adsaddrl;
+ uint32_t adsaddrh;
+ uint32_t res3[39];
+ uint32_t hostver; /* Host controller version */
+ uint32_t res4;
+ uint32_t dmaerr; /* DMA error address */
+ uint32_t dmaerrh; /* DMA error address high */
+ uint32_t dmaerrattr; /* DMA error atrribute */
+ uint32_t res5;
+ uint32_t hostcapblt2;/* Host controller capabilities2 */
+ uint32_t res6[2];
+ uint32_t tcr; /* Tuning control */
+ uint32_t res7[7];
+ uint32_t dirctrl; /* Direction control */
+ uint32_t ccr; /* Clock control */
+ uint32_t res8[177];
+ uint32_t ctl; /* Control register */
+};
+
+/* SD/MMC card attributes */
+struct card_attributes {
+ uint32_t type; /* sd or mmc card */
+ uint32_t version; /* version */
+ uint32_t block_len; /* block length */
+ uint32_t bus_freq; /* sdhc bus frequency */
+ uint16_t rca; /* relative card address */
+ uint8_t is_high_capacity; /* high capacity */
+};
+
+struct mmc {
+ struct esdhc_regs *esdhc_regs;
+ struct card_attributes card;
+
+ uint32_t block_len;
+ uint32_t voltages_caps; /* supported voltaes */
+ uint32_t dma_support; /* DMA support */
+};
+
+enum cntrl_num {
+ SDHC1 = 0,
+ SDHC2
+};
+
+int sd_emmc_init(uintptr_t *block_dev_spec,
+ uintptr_t nxp_esdhc_addr,
+ size_t nxp_sd_block_offset,
+ size_t nxp_sd_block_size,
+ bool card_detect);
+
+int esdhc_emmc_init(struct mmc *mmc, bool card_detect);
+int esdhc_read(struct mmc *mmc, uint32_t src_offset, uintptr_t dst,
+ size_t size);
+int esdhc_write(struct mmc *mmc, uintptr_t src, uint32_t dst_offset,
+ size_t size);
+
+#ifdef NXP_ESDHC_BE
+#define esdhc_in32(a) bswap32(mmio_read_32((uintptr_t)(a)))
+#define esdhc_out32(a, v) mmio_write_32((uintptr_t)(a), bswap32(v))
+#elif defined(NXP_ESDHC_LE)
+#define esdhc_in32(a) mmio_read_32((uintptr_t)(a))
+#define esdhc_out32(a, v) mmio_write_32((uintptr_t)(a), (v))
+#else
+#error Please define CCSR ESDHC register endianness
+#endif
+
+#endif /*SD_MMC_H*/