fdts: add device tree sources for morello platform
Change-Id: Ib5945c37983505f327a195bdb8b91ed1b7b90921
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
diff --git a/fdts/morello-fvp.dts b/fdts/morello-fvp.dts
new file mode 100644
index 0000000..ecbed5e
--- /dev/null
+++ b/fdts/morello-fvp.dts
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+
+ chosen {
+ stdout-path = "soc_uart0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-firmware@ff000000 {
+ reg = <0 0xff000000 0 0x01000000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cpu0@0 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ cpu1@100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ cpu2@10000 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ cpu3@10100 {
+ compatible = "arm,armv8";
+ reg = <0x0 0x10100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ clocks = <&scmi_dvfs 0>;
+ };
+ };
+
+ /* The first bank of memory, memory map is actually provided by UEFI. */
+ memory@80000000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ device_type = "memory";
+ /* [0x80000000-0xffffffff] */
+ reg = <0x00000000 0x80000000 0x0 0x80000000>;
+ };
+
+ memory@8080000000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ device_type = "memory";
+ /* [0x8080000000-0x83ffffffff] */
+ reg = <0x00000080 0x80000000 0x1 0x80000000>;
+ };
+
+ virtio_block@1c170000 {
+ compatible = "virtio,mmio";
+ reg = <0x0 0x1c170000 0x0 0x200>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ethernet@1d100000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x0 0x1d100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ kmi@1c150000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x1c150000 0x0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@1c160000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x0 0x1c160000 0x0 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ firmware {
+ scmi {
+ compatible = "arm,scmi";
+ mbox-names = "tx", "rx";
+ mboxes = <&mailbox 1 0 &mailbox 1 1>;
+ shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_dvfs: protocol@13 {
+ reg = <0x13>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ bp_clock24mhz: clock24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "bp:clock24mhz";
+ };
+};
+
+&gic {
+ reg = <0x0 0x30000000 0 0x10000>, /* GICD */
+ <0x0 0x300c0000 0 0x80000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+};