diff --git a/drivers/renesas/common/common.c b/drivers/renesas/common/common.c
index 9b7c1eb..a0aa480 100644
--- a/drivers/renesas/common/common.c
+++ b/drivers/renesas/common/common.c
@@ -1,11 +1,12 @@
 /*
- * Copyright (c) 2018-2020, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2018-2021, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <lib/mmio.h>
 
+#include "cpg_registers.h"
 #include "rcar_private.h"
 
 #if IMAGE_BL31
@@ -16,7 +17,7 @@
 {
 	uint32_t value = regval;
 
-	mmio_write_32((uintptr_t) RCAR_CPGWPR, ~value);
+	mmio_write_32(CPG_CPGWPR, ~value);
 	mmio_write_32(regadr, value);
 }
 
diff --git a/drivers/renesas/common/emmc/emmc_init.c b/drivers/renesas/common/emmc/emmc_init.c
index 9c2ec47..c0ec600 100644
--- a/drivers/renesas/common/emmc/emmc_init.c
+++ b/drivers/renesas/common/emmc/emmc_init.c
@@ -88,11 +88,11 @@
 	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
 	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* MMC clock stop */
 
-	dataL = mmio_read_32(CPG_SMSTPCR3);
+	dataL = mmio_read_32(SMSTPCR3);
 	if ((dataL & CPG_MSTP_MMC) == 0U) {
 		dataL |= (CPG_MSTP_MMC);
 		mmio_write_32(CPG_CPGWPR, (~dataL));
-		mmio_write_32(CPG_SMSTPCR3, dataL);
+		mmio_write_32(SMSTPCR3, dataL);
 	}
 
 	return result;
@@ -101,7 +101,7 @@
 static EMMC_ERROR_CODE emmc_dev_init(void)
 {
 	/* Enable clock supply to eMMC. */
-	mstpcr_write(CPG_SMSTPCR3, CPG_MSTPSR3, CPG_MSTP_MMC);
+	mstpcr_write(SMSTPCR3, CPG_MSTPSR3, CPG_MSTP_MMC);
 
 	/* Set SD clock */
 	mmio_write_32(CPG_CPGWPR, ~((uint32_t) (BIT9 | BIT0)));	/* SD phy 200MHz */
diff --git a/drivers/renesas/common/emmc/emmc_registers.h b/drivers/renesas/common/emmc/emmc_registers.h
index 370cc1c..67d285d 100644
--- a/drivers/renesas/common/emmc/emmc_registers.h
+++ b/drivers/renesas/common/emmc/emmc_registers.h
@@ -50,17 +50,6 @@
 #define BIT30	(0x40000000U)
 #define BIT31	(0x80000000U)
 
-/* Clock Pulse Generator (CPG) registers */
-#define CPG_BASE	(0xE6150000U)
-/* Module stop status register 3 */
-#define CPG_MSTPSR3	(CPG_BASE + 0x0048U)
-/* System module stop control register 3 */
-#define CPG_SMSTPCR3	(CPG_BASE + 0x013CU)
-/* SDHI2 clock frequency control register */
-#define CPG_SD2CKCR	(CPG_BASE + 0x0268U)
-/* SDHI3 clock frequency control register */
-#define CPG_SD3CKCR	(CPG_BASE + 0x026CU)
-
 #if USE_MMC_CH == MMC_CH0
 #define CPG_SDxCKCR		(CPG_SD2CKCR)	/* SDHI2/MMC0 */
 #else /* USE_MMC_CH == MMC_CH0 */
diff --git a/drivers/renesas/common/pwrc/pwrc.c b/drivers/renesas/common/pwrc/pwrc.c
index c0f015f..3f60fe6 100644
--- a/drivers/renesas/common/pwrc/pwrc.c
+++ b/drivers/renesas/common/pwrc/pwrc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2021, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -20,6 +20,7 @@
 #include "pwrc.h"
 #include "rcar_def.h"
 #include "rcar_private.h"
+#include "cpg_registers.h"
 
 /*
  * Someday there will be a generic power controller api. At the moment each
@@ -238,7 +239,7 @@
 	scu_power_up(mpidr);
 	cpu = mpidr & MPIDR_CPU_MASK;
 	on_data = 1 << cpu;
-	mmio_write_32(RCAR_CPGWPR, ~on_data);
+	mmio_write_32(CPG_CPGWPR, ~on_data);
 	mmio_write_32(on_reg, on_data);
 	mmio_write_32(res_reg, res_data & (~(1 << (3 - cpu))));
 
@@ -260,7 +261,7 @@
 	if (read_mpidr_el1() != mpidr)
 		panic();
 
-	mmio_write_32(RCAR_CPGWPR, ~CPU_PWR_OFF);
+	mmio_write_32(CPG_CPGWPR, ~CPU_PWR_OFF);
 	mmio_write_32(reg + cpu * 0x0010, CPU_PWR_OFF);
 
 	rcar_lock_release();