diff --git a/drivers/renesas/common/emmc/emmc_init.c b/drivers/renesas/common/emmc/emmc_init.c
index 9c2ec47..c0ec600 100644
--- a/drivers/renesas/common/emmc/emmc_init.c
+++ b/drivers/renesas/common/emmc/emmc_init.c
@@ -88,11 +88,11 @@
 	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
 	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* MMC clock stop */
 
-	dataL = mmio_read_32(CPG_SMSTPCR3);
+	dataL = mmio_read_32(SMSTPCR3);
 	if ((dataL & CPG_MSTP_MMC) == 0U) {
 		dataL |= (CPG_MSTP_MMC);
 		mmio_write_32(CPG_CPGWPR, (~dataL));
-		mmio_write_32(CPG_SMSTPCR3, dataL);
+		mmio_write_32(SMSTPCR3, dataL);
 	}
 
 	return result;
@@ -101,7 +101,7 @@
 static EMMC_ERROR_CODE emmc_dev_init(void)
 {
 	/* Enable clock supply to eMMC. */
-	mstpcr_write(CPG_SMSTPCR3, CPG_MSTPSR3, CPG_MSTP_MMC);
+	mstpcr_write(SMSTPCR3, CPG_MSTPSR3, CPG_MSTP_MMC);
 
 	/* Set SD clock */
 	mmio_write_32(CPG_CPGWPR, ~((uint32_t) (BIT9 | BIT0)));	/* SD phy 200MHz */
diff --git a/drivers/renesas/common/emmc/emmc_registers.h b/drivers/renesas/common/emmc/emmc_registers.h
index 370cc1c..67d285d 100644
--- a/drivers/renesas/common/emmc/emmc_registers.h
+++ b/drivers/renesas/common/emmc/emmc_registers.h
@@ -50,17 +50,6 @@
 #define BIT30	(0x40000000U)
 #define BIT31	(0x80000000U)
 
-/* Clock Pulse Generator (CPG) registers */
-#define CPG_BASE	(0xE6150000U)
-/* Module stop status register 3 */
-#define CPG_MSTPSR3	(CPG_BASE + 0x0048U)
-/* System module stop control register 3 */
-#define CPG_SMSTPCR3	(CPG_BASE + 0x013CU)
-/* SDHI2 clock frequency control register */
-#define CPG_SD2CKCR	(CPG_BASE + 0x0268U)
-/* SDHI3 clock frequency control register */
-#define CPG_SD3CKCR	(CPG_BASE + 0x026CU)
-
 #if USE_MMC_CH == MMC_CH0
 #define CPG_SDxCKCR		(CPG_SD2CKCR)	/* SDHI2/MMC0 */
 #else /* USE_MMC_CH == MMC_CH0 */