ARM Trusted Firmware for Xilinx Zynq UltraScale+ MPSoC

ARM Trusted Firmware implements the EL3 firmware layer for Xilinx Zynq UltraScale + MPSoC. The platform only uses the runtime part of ATF as ZynqMP already has a BootROM (BL1) and FSBL (BL2).

BL31 is ATF.
BL32 is an optional Secure Payload.
BL33 is the non-secure world software (U-Boot, Linux etc).

To build:

make ERROR_DEPRECATED=1 RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=zynqmp bl31

To build bl32 TSP you have to rebuild bl31 too:

make ERROR_DEPRECATED=1 RESET_TO_BL31=1 CROSS_COMPILE=aarch64-none-elf- PLAT=zynqmp SPD=tspd bl31 bl32

ZynqMP platform specific build options

  • ZYNQMP_ATF_LOCATION: Specifies the location of the bl31 binary. Options:

    • tsram : bl31 will be located in OCM (default)
    • tdram : bl31 will be located in DRAM (address: 0x30000000)
  • ZYNQMP_TSP_RAM_LOCATION: Specifies the location of the bl32 binary and secure payload dispatcher. Options:

    • tsram : bl32/spd will be located in OCM (default)
    • tdram : bl32/spd will be located in DRAM (address: 0x30000000)

Power Domain Tree

The following power domain tree represents the power domain model used by the ATF for ZynqMP:

                +-+
                |0|
                +-+
     +-------+---+---+-------+
     |       |       |       |
     |       |       |       |
     v       v       v       v
    +-+     +-+     +-+     +-+
    |0|     |1|     |2|     |3|
    +-+     +-+     +-+     +-+

The 4 leaf power domains represent the individual A53 cores, while resources common to the cluster are grouped in the power domain on the top.