diff --git a/drivers/renesas/rcar/emmc/emmc_cmd.c b/drivers/renesas/rcar/emmc/emmc_cmd.c
new file mode 100644
index 0000000..0f39349
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_cmd.c
@@ -0,0 +1,491 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+#include "micro_delay.h"
+
+static void emmc_little_to_big(uint8_t *p, uint32_t value)
+{
+	if (p == NULL)
+		return;
+
+	p[0] = (uint8_t) (value >> 24);
+	p[1] = (uint8_t) (value >> 16);
+	p[2] = (uint8_t) (value >> 8);
+	p[3] = (uint8_t) value;
+}
+
+static void emmc_softreset(void)
+{
+	int32_t loop = 10000;
+	int32_t retry = 1000;
+
+	/* flag clear */
+	mmc_drv_obj.during_cmd_processing = FALSE;
+	mmc_drv_obj.during_transfer = FALSE;
+	mmc_drv_obj.during_dma_transfer = FALSE;
+	mmc_drv_obj.state_machine_blocking = FALSE;
+	mmc_drv_obj.force_terminate = FALSE;
+	mmc_drv_obj.dma_error_flag = FALSE;
+
+	/* during operation ? */
+	if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) == 0)
+		goto reset;
+
+	/* wait CMDSEQ = 0 */
+	while (loop > 0) {
+		if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) == 0)
+			break;	/* ready */
+
+		loop--;
+		if ((loop == 0) && (retry > 0)) {
+			rcar_micro_delay(1000U);	/* wait 1ms */
+			loop = 10000;
+			retry--;
+		}
+	}
+
+reset:
+	/* reset */
+	SETR_32(SOFT_RST, (GETR_32(SOFT_RST) & (~SOFT_RST_SDRST)));
+	SETR_32(SOFT_RST, (GETR_32(SOFT_RST) | SOFT_RST_SDRST));
+
+	/* initialize */
+	SETR_32(SD_INFO1, 0x00000000U);
+	SETR_32(SD_INFO2, SD_INFO2_CLEAR);
+	SETR_32(SD_INFO1_MASK, 0x00000000U);	/* all interrupt disable */
+	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
+
+}
+
+static void emmc_read_response(uint32_t *response)
+{
+	uint8_t *p;
+
+	if (response == NULL)
+		return;
+
+	/* read response */
+	if (mmc_drv_obj.response_length != EMMC_MAX_RESPONSE_LENGTH) {
+		*response = GETR_32(SD_RSP10);	/* [39:8] */
+		return;
+	}
+
+	/* CSD or CID */
+	p = (uint8_t *) (response);
+	emmc_little_to_big(p, ((GETR_32(SD_RSP76) << 8)
+			| (GETR_32(SD_RSP54) >> 24)));	/* [127:96]     */
+	emmc_little_to_big(p + 4, ((GETR_32(SD_RSP54) << 8)
+			| (GETR_32(SD_RSP32) >> 24)));	/* [95:64]      */
+	emmc_little_to_big(p + 8, ((GETR_32(SD_RSP32) << 8)
+			| (GETR_32(SD_RSP10) >> 24)));	/* [63:32]      */
+	emmc_little_to_big(p + 12, (GETR_32(SD_RSP10) << 8));
+}
+
+static EMMC_ERROR_CODE emmc_response_check(uint32_t *response,
+					   uint32_t error_mask)
+{
+
+	HAL_MEMCARD_RESPONSE_TYPE response_type =
+	    (HAL_MEMCARD_RESPONSE_TYPE) (mmc_drv_obj.cmd_info.
+					 cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK);
+
+	if (response == NULL)
+		return EMMC_ERR_PARAM;
+
+	if (response_type == HAL_MEMCARD_RESPONSE_NONE)
+		return EMMC_SUCCESS;
+
+
+	if (response_type <= HAL_MEMCARD_RESPONSE_R1b) {
+		/* R1 or R1b */
+		mmc_drv_obj.current_state =
+		    (EMMC_R1_STATE) ((*response & EMMC_R1_STATE_MASK) >>
+				     EMMC_R1_STATE_SHIFT);
+		if ((*response & error_mask) != 0) {
+			if ((0x80 & *response) != 0) {
+				ERROR("BL2: emmc SWITCH_ERROR\n");
+			}
+			return EMMC_ERR_CARD_STATUS_BIT;
+		}
+		return EMMC_SUCCESS;;
+	}
+
+	if (response_type == HAL_MEMCARD_RESPONSE_R4) {
+		if ((*response & EMMC_R4_STATUS) != 0)
+			return EMMC_ERR_CARD_STATUS_BIT;
+	}
+
+	return EMMC_SUCCESS;
+}
+
+static void emmc_WaitCmd2Cmd_8Cycle(void)
+{
+	uint32_t dataL, wait = 0;
+
+	dataL = GETR_32(SD_CLK_CTRL);
+	dataL &= 0x000000FF;
+
+	switch (dataL) {
+	case 0xFF:
+	case 0x00:
+	case 0x01:
+	case 0x02:
+	case 0x04:
+	case 0x08:
+	case 0x10:
+	case 0x20:
+		wait = 10U;
+		break;
+	case 0x40:
+		wait = 20U;
+		break;
+	case 0x80:
+		wait = 30U;
+		break;
+	}
+
+	rcar_micro_delay(wait);
+}
+
+static void cmdErrSdInfo2Log(void)
+{
+	ERROR("BL2: emmc ERR SD_INFO2 = 0x%x\n", mmc_drv_obj.error_info.info2);
+}
+
+static void emmc_data_transfer_dma(void)
+{
+	mmc_drv_obj.during_dma_transfer = TRUE;
+	mmc_drv_obj.dma_error_flag = FALSE;
+
+	SETR_32(SD_INFO1_MASK, 0x00000000U);
+	SETR_32(SD_INFO2_MASK, (SD_INFO2_ALL_ERR | SD_INFO2_CLEAR));
+
+	/* DMAC setting */
+	if (mmc_drv_obj.cmd_info.dir == HAL_MEMCARD_WRITE) {
+		/* transfer complete interrupt enable */
+		SETR_32(DM_CM_INFO1_MASK,
+			(DM_CM_INFO_MASK_CLEAR | DM_CM_INFO_CH0_ENABLE));
+		SETR_32(DM_CM_INFO2_MASK,
+			(DM_CM_INFO_MASK_CLEAR | DM_CM_INFO_CH0_ENABLE));
+		/* BUFF --> FIFO */
+		SETR_32(DM_CM_DTRAN_MODE, (DM_CM_DTRAN_MODE_CH0 |
+					   DM_CM_DTRAN_MODE_BIT_WIDTH));
+	} else {
+		/* transfer complete interrupt enable */
+		SETR_32(DM_CM_INFO1_MASK,
+			(DM_CM_INFO_MASK_CLEAR | DM_CM_INFO_CH1_ENABLE));
+		SETR_32(DM_CM_INFO2_MASK,
+			(DM_CM_INFO_MASK_CLEAR | DM_CM_INFO_CH1_ENABLE));
+		/* FIFO --> BUFF */
+		SETR_32(DM_CM_DTRAN_MODE, (DM_CM_DTRAN_MODE_CH1
+					   | DM_CM_DTRAN_MODE_BIT_WIDTH));
+	}
+	SETR_32(DM_DTRAN_ADDR, (((uintptr_t) mmc_drv_obj.buff_address_virtual &
+				 DM_DTRAN_ADDR_WRITE_MASK)));
+
+	SETR_32(DM_CM_DTRAN_CTRL, DM_CM_DTRAN_CTRL_START);
+}
+
+EMMC_ERROR_CODE emmc_exec_cmd(uint32_t error_mask, uint32_t *response)
+{
+	EMMC_ERROR_CODE rtn_code = EMMC_SUCCESS;
+	HAL_MEMCARD_RESPONSE_TYPE response_type;
+	HAL_MEMCARD_COMMAND_TYPE cmd_type;
+	EMMC_INT_STATE state;
+	uint32_t err_not_care_flag = FALSE;
+
+	/* parameter check */
+	if (response == NULL) {
+		emmc_write_error_info(EMMC_FUNCNO_EXEC_CMD, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* state check */
+	if (mmc_drv_obj.clock_enable != TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_EXEC_CMD, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	if (mmc_drv_obj.state_machine_blocking == TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_EXEC_CMD, EMMC_ERR);
+		return EMMC_ERR;
+	}
+
+	state = ESTATE_BEGIN;
+	response_type =
+	    (HAL_MEMCARD_RESPONSE_TYPE) (mmc_drv_obj.cmd_info.
+					 cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK);
+	cmd_type =
+	    (HAL_MEMCARD_COMMAND_TYPE) (mmc_drv_obj.cmd_info.
+					cmd & HAL_MEMCARD_COMMAND_TYPE_MASK);
+
+	/* state machine */
+	while ((mmc_drv_obj.force_terminate != TRUE) && (state != ESTATE_END)) {
+		/* The interrupt factor flag is observed. */
+		emmc_interrupt();
+
+		/* wait interrupt */
+		if (mmc_drv_obj.state_machine_blocking == TRUE)
+			continue;
+
+		switch (state) {
+		case ESTATE_BEGIN:
+			/* Busy check */
+			if ((mmc_drv_obj.error_info.info2 & SD_INFO2_CBSY) != 0) {
+				emmc_write_error_info(EMMC_FUNCNO_EXEC_CMD,
+						      EMMC_ERR_CARD_BUSY);
+				return EMMC_ERR_CARD_BUSY;
+			}
+
+			/* clear register */
+			SETR_32(SD_INFO1, 0x00000000U);
+			SETR_32(SD_INFO2, SD_INFO2_CLEAR);
+			SETR_32(SD_INFO1_MASK, SD_INFO1_INFO0);
+			SETR_32(SD_INFO2_MASK,
+				(SD_INFO2_ALL_ERR | SD_INFO2_CLEAR));
+
+			state = ESTATE_ISSUE_CMD;
+			/* through */
+
+		case ESTATE_ISSUE_CMD:
+			/* ARG */
+			SETR_32(SD_ARG, mmc_drv_obj.cmd_info.arg);
+			/* issue cmd */
+			SETR_32(SD_CMD, mmc_drv_obj.cmd_info.hw);
+			/* Set driver flag */
+			mmc_drv_obj.during_cmd_processing = TRUE;
+			mmc_drv_obj.state_machine_blocking = TRUE;
+
+			if (response_type == HAL_MEMCARD_RESPONSE_NONE) {
+				state = ESTATE_NON_RESP_CMD;
+			} else {
+				state = ESTATE_RCV_RESP;
+			}
+
+			break;
+
+		case ESTATE_NON_RESP_CMD:
+			/* interrupt disable */
+			SETR_32(SD_INFO1_MASK, 0x00000000U);
+			SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);
+
+			/* check interrupt */
+			if ((mmc_drv_obj.int_event2 & SD_INFO2_ALL_ERR) != 0) {
+				/* error interrupt */
+				cmdErrSdInfo2Log();
+				rtn_code = EMMC_ERR_INFO2;
+				state = ESTATE_ERROR;
+			} else if ((mmc_drv_obj.int_event1 & SD_INFO1_INFO0) ==
+				   0) {
+				/* not receive expected interrupt */
+				rtn_code = EMMC_ERR_RESPONSE;
+				state = ESTATE_ERROR;
+			} else {
+				emmc_WaitCmd2Cmd_8Cycle();
+				state = ESTATE_END;
+			}
+			break;
+
+		case ESTATE_RCV_RESP:
+			/* interrupt disable */
+			SETR_32(SD_INFO1_MASK, 0x00000000U);
+			SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);
+
+			/* check interrupt */
+			if ((mmc_drv_obj.int_event2 & SD_INFO2_ALL_ERR) != 0) {
+				if ((mmc_drv_obj.get_partition_access_flag ==
+				     TRUE)
+				    && ((mmc_drv_obj.int_event2 & SD_INFO2_ERR6)
+					!= 0U)) {
+					err_not_care_flag = TRUE;
+					rtn_code = EMMC_ERR_CMD_TIMEOUT;
+				} else {
+					/* error interrupt */
+					cmdErrSdInfo2Log();
+					rtn_code = EMMC_ERR_INFO2;
+				}
+				state = ESTATE_ERROR;
+				break;
+			} else if ((mmc_drv_obj.int_event1 & SD_INFO1_INFO0) ==
+				   0) {
+				/* not receive expected interrupt */
+				rtn_code = EMMC_ERR_RESPONSE;
+				state = ESTATE_ERROR;
+				break;
+			}
+
+			/* read response */
+			emmc_read_response(response);
+
+			/* check response */
+			rtn_code = emmc_response_check(response, error_mask);
+			if (rtn_code != EMMC_SUCCESS) {
+				state = ESTATE_ERROR;
+				break;
+			}
+
+			if (response_type == HAL_MEMCARD_RESPONSE_R1b) {
+				/* R1b */
+				SETR_32(SD_INFO2_MASK,
+					(SD_INFO2_ALL_ERR | SD_INFO2_CLEAR));
+				state = ESTATE_RCV_RESPONSE_BUSY;
+			} else {
+				state = ESTATE_CHECK_RESPONSE_COMPLETE;
+			}
+			break;
+
+		case ESTATE_RCV_RESPONSE_BUSY:
+			/* check interrupt */
+			if ((mmc_drv_obj.int_event2 & SD_INFO2_ALL_ERR) != 0) {
+				/* error interrupt */
+				cmdErrSdInfo2Log();
+				rtn_code = EMMC_ERR_INFO2;
+				state = ESTATE_ERROR;
+				break;
+			}
+			/* DAT0 not Busy */
+			if ((SD_INFO2_DAT0 & mmc_drv_obj.error_info.info2) != 0) {
+				state = ESTATE_CHECK_RESPONSE_COMPLETE;
+				break;
+			}
+			break;
+
+		case ESTATE_CHECK_RESPONSE_COMPLETE:
+			if (cmd_type >= HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE) {
+				state = ESTATE_DATA_TRANSFER;
+			} else {
+				emmc_WaitCmd2Cmd_8Cycle();
+				state = ESTATE_END;
+			}
+			break;
+
+		case ESTATE_DATA_TRANSFER:
+			/* ADTC command  */
+			mmc_drv_obj.during_transfer = TRUE;
+			mmc_drv_obj.state_machine_blocking = TRUE;
+
+			if (mmc_drv_obj.transfer_mode == HAL_MEMCARD_DMA) {
+				/* DMA */
+				emmc_data_transfer_dma();
+			} else {
+				/* PIO */
+				/* interrupt enable (FIFO read/write enable) */
+				if (mmc_drv_obj.cmd_info.dir ==
+				    HAL_MEMCARD_WRITE) {
+					SETR_32(SD_INFO2_MASK,
+						(SD_INFO2_BWE | SD_INFO2_ALL_ERR
+						 | SD_INFO2_CLEAR));
+				} else {
+					SETR_32(SD_INFO2_MASK,
+						(SD_INFO2_BRE | SD_INFO2_ALL_ERR
+						 | SD_INFO2_CLEAR));
+				}
+			}
+			state = ESTATE_DATA_TRANSFER_COMPLETE;
+			break;
+
+		case ESTATE_DATA_TRANSFER_COMPLETE:
+			/* check interrupt */
+			if ((mmc_drv_obj.int_event2 & SD_INFO2_ALL_ERR) != 0) {
+				/* error interrupt */
+				cmdErrSdInfo2Log();
+				rtn_code = EMMC_ERR_INFO2;
+				state = ESTATE_TRANSFER_ERROR;
+				break;
+			}
+
+			/* DMAC error ? */
+			if (mmc_drv_obj.dma_error_flag == TRUE) {
+				/* Error occurred in DMAC driver. */
+				rtn_code = EMMC_ERR_FROM_DMAC_TRANSFER;
+				state = ESTATE_TRANSFER_ERROR;
+			} else if (mmc_drv_obj.during_dma_transfer == TRUE) {
+				/* DMAC not finished. unknown error */
+				rtn_code = EMMC_ERR;
+				state = ESTATE_TRANSFER_ERROR;
+			} else {
+				SETR_32(SD_INFO1_MASK, SD_INFO1_INFO2);
+				SETR_32(SD_INFO2_MASK,
+					(SD_INFO2_ALL_ERR | SD_INFO2_CLEAR));
+
+				mmc_drv_obj.state_machine_blocking = TRUE;
+
+				state = ESTATE_ACCESS_END;
+			}
+			break;
+
+		case ESTATE_ACCESS_END:
+
+			/* clear flag */
+			if (HAL_MEMCARD_DMA == mmc_drv_obj.transfer_mode) {
+				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);	/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+				SETR_32(SD_STOP, 0x00000000U);
+				mmc_drv_obj.during_dma_transfer = FALSE;
+			}
+
+			SETR_32(SD_INFO1_MASK, 0x00000000U);
+			SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);
+			SETR_32(SD_INFO1, 0x00000000U);
+			SETR_32(SD_INFO2, SD_INFO2_CLEAR);
+
+			if ((mmc_drv_obj.int_event1 & SD_INFO1_INFO2) != 0) {
+				emmc_WaitCmd2Cmd_8Cycle();
+				state = ESTATE_END;
+			} else {
+				state = ESTATE_ERROR;
+			}
+			break;
+
+		case ESTATE_TRANSFER_ERROR:
+			/* The error occurred in the Data transfer.  */
+			if (HAL_MEMCARD_DMA == mmc_drv_obj.transfer_mode) {
+				SETR_32(CC_EXT_MODE, CC_EXT_MODE_CLEAR);	/* W (CC_EXT_MODE, H'0000_1010) SD_BUF DMA transfer disabled */
+				SETR_32(SD_STOP, 0x00000000U);
+				mmc_drv_obj.during_dma_transfer = FALSE;
+			}
+			/* through */
+
+		case ESTATE_ERROR:
+			if (err_not_care_flag == TRUE) {
+				mmc_drv_obj.during_cmd_processing = FALSE;
+			} else {
+				emmc_softreset();
+				emmc_write_error_info(EMMC_FUNCNO_EXEC_CMD,
+						      rtn_code);
+			}
+			return rtn_code;
+
+		default:
+			state = ESTATE_END;
+			break;
+		}		/* switch (state) */
+	}			/*  while ( (mmc_drv_obj.force_terminate != TRUE) && (state != ESTATE_END) ) */
+
+	/* force terminate */
+	if (mmc_drv_obj.force_terminate == TRUE) {
+		/* timeout timer is expired. Or, PIO data transfer error. */
+		/* Timeout occurred in the DMA transfer. */
+		if (mmc_drv_obj.during_dma_transfer == TRUE) {
+			mmc_drv_obj.during_dma_transfer = FALSE;
+		}
+		ERROR("BL2: emmc exec_cmd:EMMC_ERR_FORCE_TERMINATE\n");
+		emmc_softreset();
+
+		return EMMC_ERR_FORCE_TERMINATE;	/* error information has already been written. */
+	}
+
+	/* success */
+	mmc_drv_obj.during_cmd_processing = FALSE;
+	mmc_drv_obj.during_transfer = FALSE;
+
+	return EMMC_SUCCESS;
+}
diff --git a/drivers/renesas/rcar/emmc/emmc_config.h b/drivers/renesas/rcar/emmc/emmc_config.h
new file mode 100644
index 0000000..16dcea1
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_config.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file  emmc_config.h
+ * @brief Configuration file
+ *
+ */
+
+#ifndef __EMMC_CONFIG_H__
+#define __EMMC_CONFIG_H__
+
+/* ************************ HEADER (INCLUDE) SECTION *********************** */
+
+/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
+
+/** @brief MMC driver config
+ */
+#define EMMC_RCA                1UL	/* RCA  */
+#define EMMC_RW_DATA_TIMEOUT    0x40UL	/* 314ms (freq = 400KHz, timeout Counter = 0x04(SDCLK * 2^17)  */
+#define EMMC_RETRY_COUNT        0	/* how many times to try after fail. Don't change. */
+#define EMMC_CMD_MAX            60UL	/* Don't change. */
+
+/** @brief etc
+ */
+#define LOADIMAGE_FLAGS_DMA_ENABLE              0x00000001UL
+
+/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
+
+/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
+
+/* ************************** FUNCTION PROTOTYPES ************************** */
+
+/* ********************************* CODE ********************************** */
+
+#endif /* #ifndef __EMMC_CONFIG_H__ */
+/* ******************************** END ************************************ */
diff --git a/drivers/renesas/rcar/emmc/emmc_def.h b/drivers/renesas/rcar/emmc/emmc_def.h
new file mode 100644
index 0000000..2944515
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_def.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file  emmc_def.h
+ * @brief eMMC boot is expecting this header file
+ *
+ */
+
+#ifndef __EMMC_DEF_H__
+#define __EMMC_DEF_H__
+
+#include "emmc_std.h"
+
+/* ************************ HEADER (INCLUDE) SECTION *********************** */
+
+/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
+#define EMMC_POWER_ON		(1U)
+
+/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
+
+/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
+extern st_mmc_base mmc_drv_obj;
+
+/* ************************** FUNCTION PROTOTYPES ************************** */
+
+/** @brief for assembler program
+ */
+uint32_t _rom_emmc_finalize(void);
+
+/** @brief eMMC driver API
+ */
+EMMC_ERROR_CODE rcar_emmc_init(void);
+EMMC_ERROR_CODE emmc_terminate(void);
+EMMC_ERROR_CODE rcar_emmc_memcard_power(uint8_t mode);
+EMMC_ERROR_CODE rcar_emmc_mount(void);
+EMMC_ERROR_CODE emmc_set_request_mmc_clock(uint32_t *freq);
+EMMC_ERROR_CODE emmc_send_idle_cmd(uint32_t arg);
+EMMC_ERROR_CODE emmc_select_partition(EMMC_PARTITION_ID id);
+EMMC_ERROR_CODE emmc_read_sector(uint32_t *buff_address_virtual,
+				 uint32_t sector_number, uint32_t count,
+				 uint32_t feature_flags);
+EMMC_ERROR_CODE emmc_write_sector(uint32_t *buff_address_virtual,
+				  uint32_t sector_number, uint32_t count,
+				  uint32_t feature_flags);
+EMMC_ERROR_CODE emmc_erase_sector(uint32_t *start_address,
+				  uint32_t *end_address);
+uint32_t emmc_bit_field(uint8_t *data, uint32_t top, uint32_t bottom);
+
+/** @brief interrupt service
+ */
+uint32_t emmc_interrupt(void);
+
+/** @brief DMA
+ */
+
+/** @brief send command API
+ */
+EMMC_ERROR_CODE emmc_exec_cmd(uint32_t error_mask, uint32_t *response);
+void emmc_make_nontrans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg);
+void emmc_make_trans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg,
+			 uint32_t *buff_address_virtual, uint32_t len,
+			 HAL_MEMCARD_OPERATION dir,
+			 HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode);
+EMMC_ERROR_CODE emmc_set_ext_csd(uint32_t arg);
+
+/** @brief for error information
+ */
+void emmc_write_error_info(uint16_t func_no, EMMC_ERROR_CODE error_code);
+void emmc_write_error_info_func_no(uint16_t func_no);
+
+/* ********************************* CODE ********************************** */
+
+#endif /* #define __EMMC_DEF_H__ */
+/* ******************************** END ************************************ */
diff --git a/drivers/renesas/rcar/emmc/emmc_hal.h b/drivers/renesas/rcar/emmc/emmc_hal.h
new file mode 100644
index 0000000..633446c
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_hal.h
@@ -0,0 +1,318 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file  emmc_hal.h
+ * @brief emmc boot driver is expecting this header file
+ *
+ */
+
+#ifndef __EMMC_HAL_H__
+#define __EMMC_HAL_H__
+/* ************************ HEADER (INCLUDE) SECTION *********************** */
+#include <stdint.h>
+/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
+
+/** @brief memory card error/status types
+ */
+#define HAL_MEMCARD_OUT_OF_RANGE            0x80000000L
+#define HAL_MEMCARD_ADDRESS_ERROR           0x40000000L
+#define HAL_MEMCARD_BLOCK_LEN_ERROR         0x20000000L
+#define HAL_MEMCARD_ERASE_SEQ_ERROR         0x10000000L
+#define HAL_MEMCARD_ERASE_PARAM             0x08000000L
+#define HAL_MEMCARD_WP_VIOLATION            0x04000000L
+#define HAL_MEMCARD_CARD_IS_LOCKED          0x02000000L
+#define HAL_MEMCARD_LOCK_UNLOCK_FAILED      0x01000000L
+#define HAL_MEMCARD_COM_CRC_ERROR           0x00800000L
+#define HAL_MEMCARD_ILEGAL_COMMAND          0x00400000L
+#define HAL_MEMCARD_CARD_ECC_FAILED         0x00200000L
+#define HAL_MEMCARD_CC_ERROR                0x00100000L
+#define HAL_MEMCARD_ERROR                   0x00080000L
+#define HAL_MEMCARD_UNDERRUN                0x00040000L
+#define HAL_MEMCARD_OVERRUN                 0x00020000L
+#define HAL_MEMCARD_CIDCSD_OVERWRITE        0x00010000L
+#define HAL_MEMCARD_WP_ERASE_SKIP           0x00008000L
+#define HAL_MEMCARD_CARD_ECC_DISABLED       0x00004000L
+#define HAL_MEMCARD_ERASE_RESET             0x00002000L
+#define HAL_MEMCARD_CARD_STATE              0x00001E00L
+#define HAL_MEMCARD_CARD_READY_FOR_DATA     0x00000100L
+#define HAL_MEMCARD_APP_CMD                 0x00000020L
+#define HAL_MEMCARD_SWITCH_ERROR            0x00000080L
+#define HAL_MEMCARD_AKE_SEQ_ERROR           0x00000008L
+#define HAL_MEMCARD_NO_ERRORS               0x00000000L
+
+/** @brief Memory card response types
+ */
+#define HAL_MEMCARD_COMMAND_INDEX_MASK      0x0003f
+
+/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
+
+/** @brief Type of the return value.
+ */
+typedef enum {
+	HAL_MEMCARD_FAIL = 0U,
+	HAL_MEMCARD_OK = 1U,
+	HAL_MEMCARD_DMA_ALLOC_FAIL = 2U,     /**< DMA channel allocation failed */
+	HAL_MEMCARD_DMA_TRANSFER_FAIL = 3U,  /**< DMA transfer failed */
+	HAL_MEMCARD_CARD_STATUS_ERROR = 4U,  /**< A non-masked error bit was set in the card status */
+	HAL_MEMCARD_CMD_TIMEOUT = 5U,	     /**< Command timeout occurred */
+	HAL_MEMCARD_DATA_TIMEOUT = 6U,	     /**< Data timeout occurred */
+	HAL_MEMCARD_CMD_CRC_ERROR = 7U,	     /**< Command CRC error occurred */
+	HAL_MEMCARD_DATA_CRC_ERROR = 8U	     /**< Data CRC error occurred */
+} HAL_MEMCARD_RETURN;
+
+/** @brief memory access operation
+ */
+typedef enum {
+	HAL_MEMCARD_READ = 0U,	 /**< read */
+	HAL_MEMCARD_WRITE = 1U	 /**< write */
+} HAL_MEMCARD_OPERATION;
+
+/** @brief Type of data width on memorycard bus
+ */
+typedef enum {
+	HAL_MEMCARD_DATA_WIDTH_1_BIT = 0U,
+	HAL_MEMCARD_DATA_WIDTH_4_BIT = 1U,
+	HAL_MEMCARD_DATA_WIDTH_8_BIT = 2U
+} HAL_MEMCARD_DATA_WIDTH; /**< data (bus) width types */
+
+/** @brief Presence of the memory card
+ */
+typedef enum {
+	HAL_MEMCARD_CARD_IS_IN = 0U,
+	HAL_MEMCARD_CARD_IS_OUT = 1U
+} HAL_MEMCARD_PRESENCE_STATUS;	/* presence status of the memory card */
+
+/** @brief mode of data transfer
+ */
+typedef enum {
+	HAL_MEMCARD_DMA = 0U,
+	HAL_MEMCARD_NOT_DMA = 1U
+} HAL_MEMCARD_DATA_TRANSFER_MODE;
+
+/** @brief Memory card response types.
+ */
+typedef enum hal_memcard_response_type {
+	HAL_MEMCARD_RESPONSE_NONE = 0x00000U,
+	HAL_MEMCARD_RESPONSE_R1 = 0x00100U,
+	HAL_MEMCARD_RESPONSE_R1b = 0x00200U,
+	HAL_MEMCARD_RESPONSE_R2 = 0x00300U,
+	HAL_MEMCARD_RESPONSE_R3 = 0x00400U,
+	HAL_MEMCARD_RESPONSE_R4 = 0x00500U,
+	HAL_MEMCARD_RESPONSE_R5 = 0x00600U,
+	HAL_MEMCARD_RESPONSE_R6 = 0x00700U,
+	HAL_MEMCARD_RESPONSE_R7 = 0x00800U,
+	HAL_MEMCARD_RESPONSE_TYPE_MASK = 0x00f00U
+} HAL_MEMCARD_RESPONSE_TYPE;
+
+/** @brief Memory card command types.
+ */
+typedef enum hal_memcard_command_type {
+	HAL_MEMCARD_COMMAND_TYPE_BC = 0x00000U,
+	HAL_MEMCARD_COMMAND_TYPE_BCR = 0x01000U,
+	HAL_MEMCARD_COMMAND_TYPE_AC = 0x02000U,
+	HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE = 0x03000U,
+	HAL_MEMCARD_COMMAND_TYPE_ADTC_READ = 0x04000U,
+	HAL_MEMCARD_COMMAND_TYPE_MASK = 0x07000U
+} HAL_MEMCARD_COMMAND_TYPE;
+
+/** @brief Type of memory card
+ */
+typedef enum hal_memcard_command_card_type {
+	HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON = 0x00000U,
+	HAL_MEMCARD_COMMAND_CARD_TYPE_MMC = 0x08000U,
+	HAL_MEMCARD_COMMAND_CARD_TYPE_SD = 0x10000U,
+	HAL_MEMCARD_COMMAND_CARD_TYPE_MASK = 0x18000U
+} HAL_MEMCARD_COMMAND_CARD_TYPE;
+
+/** @brief Memory card application command.
+ */
+typedef enum hal_memcard_command_app_norm {
+	HAL_MEMCARD_COMMAND_NORMAL = 0x00000U,
+	HAL_MEMCARD_COMMAND_APP = 0x20000U,
+	HAL_MEMCARD_COMMAND_APP_NORM_MASK = 0x20000U
+} HAL_MEMCARD_COMMAND_APP_NORM;
+
+/** @brief Memory card command codes.
+ */
+typedef enum {
+/* class 0 and class 1 */
+	CMD0_GO_IDLE_STATE = 0 | HAL_MEMCARD_RESPONSE_NONE | HAL_MEMCARD_COMMAND_TYPE_BC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD0 */
+	CMD1_SEND_OP_COND = 1 | HAL_MEMCARD_RESPONSE_R3 | HAL_MEMCARD_COMMAND_TYPE_BCR | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD1 */
+	CMD2_ALL_SEND_CID_MMC = 2 | HAL_MEMCARD_RESPONSE_R2 | HAL_MEMCARD_COMMAND_TYPE_BCR | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD2 */
+	CMD2_ALL_SEND_CID_SD =
+	    2 | HAL_MEMCARD_RESPONSE_R2 | HAL_MEMCARD_COMMAND_TYPE_BCR |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,
+	CMD3_SET_RELATIVE_ADDR = 3 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD3 */
+	CMD3_SEND_RELATIVE_ADDR =
+	    3 | HAL_MEMCARD_RESPONSE_R6 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,
+	CMD4_SET_DSR = 4 | HAL_MEMCARD_RESPONSE_NONE | HAL_MEMCARD_COMMAND_TYPE_BC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD4 */
+	CMD5_SLEEP_AWAKE = 5 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD5 */
+	CMD6_SWITCH = 6 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD6 */
+	CMD6_SWITCH_FUNC =
+	    6 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,
+	ACMD6_SET_BUS_WIDTH =
+	    6 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+	CMD7_SELECT_CARD = 7 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD7 */
+	CMD7_SELECT_CARD_PROG = 7 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD7(from Disconnected State to Programming State) */
+	CMD7_DESELECT_CARD =
+	    7 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,
+	CMD8_SEND_EXT_CSD = 8 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD8 */
+	CMD8_SEND_IF_COND =
+	    8 | HAL_MEMCARD_RESPONSE_R7 | HAL_MEMCARD_COMMAND_TYPE_BCR |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,
+	CMD9_SEND_CSD = 9 | HAL_MEMCARD_RESPONSE_R2 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD9 */
+	CMD10_SEND_CID = 10 | HAL_MEMCARD_RESPONSE_R2 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD10 */
+	CMD11_READ_DAT_UNTIL_STOP = 11 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD11 */
+	CMD12_STOP_TRANSMISSION = 12 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD12 */
+	CMD12_STOP_TRANSMISSION_WRITE = 12 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD12(R1b : write case) */
+	CMD13_SEND_STATUS = 13 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD13 */
+	ACMD13_SD_STATUS =
+	    13 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+	CMD14_BUSTEST_R = 14 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD14 */
+	CMD15_GO_INACTIVE_STATE = 15 | HAL_MEMCARD_RESPONSE_NONE | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD15 */
+
+/* class 2 */
+	CMD16_SET_BLOCKLEN = 16 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD16 */
+	CMD17_READ_SINGLE_BLOCK = 17 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD17 */
+	CMD18_READ_MULTIPLE_BLOCK = 18 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD18 */
+	CMD19_BUS_TEST_W = 19 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD19 */
+
+/* class 3 */
+	CMD20_WRITE_DAT_UNTIL_STOP = 20 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD20 */
+	CMD21 = 21,		/* CMD21 */
+	CMD22 = 22,		/* CMD22 */
+	ACMD22_SEND_NUM_WR_BLOCKS =
+	    22 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+
+/* class 4 */
+	CMD23_SET_BLOCK_COUNT = 23 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD23 */
+	ACMD23_SET_WR_BLK_ERASE_COUNT =
+	    23 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+	CMD24_WRITE_BLOCK = 24 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD24 */
+	CMD25_WRITE_MULTIPLE_BLOCK = 25 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD25 */
+	CMD26_PROGRAM_CID = 26 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD26 */
+	CMD27_PROGRAM_CSD = 27 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD27 */
+
+/* class 6 */
+	CMD28_SET_WRITE_PROT = 28 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD28 */
+	CMD29_CLR_WRITE_PROT = 29 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD29 */
+	CMD30_SEND_WRITE_PROT = 30 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD30 */
+	CMD30_SEND_WRITE_PROT_TYPE = 31 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD31 */
+
+/* class 5 */
+	CMD32_ERASE_WR_BLK_START = 32 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD32 */
+	CMD33_ERASE_WR_BLK_END = 33 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD33 */
+	CMD34 = 34,		/* CMD34 */
+	CMD35_ERASE_GROUP_START = 35 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD35 */
+	CMD36_ERASE_GROUP_END = 36 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD36 */
+	CMD37 = 37,		/* CMD37 */
+	CMD38_ERASE = 38 | HAL_MEMCARD_RESPONSE_R1b | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD38 */
+
+/* class 9 */
+	CMD39_FASTIO = 39 | HAL_MEMCARD_RESPONSE_R4 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD39 */
+	CMD40_GO_IRQSTATE = 40 | HAL_MEMCARD_RESPONSE_R5 | HAL_MEMCARD_COMMAND_TYPE_BCR | HAL_MEMCARD_COMMAND_CARD_TYPE_MMC | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD40 */
+	CMD41 = 41,		/* CMD41 */
+	ACMD41_SD_SEND_OP_COND =
+	    41 | HAL_MEMCARD_RESPONSE_R3 | HAL_MEMCARD_COMMAND_TYPE_BCR |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+
+/* class 7 */
+	CMD42_LOCK_UNLOCK = 42 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD42 */
+	ACMD42_SET_CLR_CARD_DETECT =
+	    42 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+	CMD43 = 43,		/* CMD43 */
+	CMD44 = 44,		/* CMD44 */
+	CMD45 = 45,		/* CMD45 */
+	CMD46 = 46,		/* CMD46 */
+	CMD47 = 47,		/* CMD47 */
+	CMD48 = 48,		/* CMD48 */
+	CMD49 = 49,		/* CMD49 */
+	CMD50 = 50,		/* CMD50 */
+	CMD51 = 51,		/* CMD51 */
+	ACMD51_SEND_SCR =
+	    51 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_READ |
+	    HAL_MEMCARD_COMMAND_CARD_TYPE_SD | HAL_MEMCARD_COMMAND_APP,
+	CMD52 = 52,		/* CMD52 */
+	CMD53 = 53,		/* CMD53 */
+	CMD54 = 54,		/* CMD54 */
+
+/* class 8 */
+	CMD55_APP_CMD = 55 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_AC | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD55 */
+	CMD56_GEN_CMD = 56 | HAL_MEMCARD_RESPONSE_R1 | HAL_MEMCARD_COMMAND_TYPE_ADTC_WRITE | HAL_MEMCARD_COMMAND_CARD_TYPE_COMMON | HAL_MEMCARD_COMMAND_NORMAL,	/* CMD56 */
+	CMD57 = 57,		/* CMD57 */
+	CMD58 = 58,		/* CMD58 */
+	CMD59 = 59,		/* CMD59 */
+	CMD60 = 60,		/* CMD60 */
+	CMD61 = 61,		/* CMD61 */
+	CMD62 = 62,		/* CMD62 */
+	CMD63 = 63		/* CMD63 */
+} HAL_MEMCARD_COMMAND;
+
+/** @brief Configuration structure from HAL layer.
+ *
+ * If some field is not available it should be filled with 0xFF.
+ * The API version is 32-bit unsigned integer telling the version of the API. The integer is divided to four sections which each can be treated as a 8-bit unsigned number:
+ * Bits 31-24 make the most significant part of the version number. This number starts from 1 i.e. the second version of the API will be 0x02xxxxxx. This number changes only, if the API itself changes so much that it is not compatible anymore with older releases.
+ * Bits 23-16 API minor version number. For example API version 2.1 would be 0x0201xxxx.
+ * Bits 15-8 are the number of the year when release is done. The 0 is year 2000, 1 is year 2001 and so on
+ * Bits 7- are the week number when release is done. First full week of the year is 1
+ *
+ * @note Example: let's assume that release 2.1 is done on week 10 year 2008 the version will get the value 0x0201080A
+ */
+typedef struct {
+    /**
+    * Version of the chipset API implementation
+    *
+    * bits [31:24] API specification major version number.<br>
+    * bits [23:16] API specification minor version number.<br>
+    * bits [15:8] API implemention year. (2000 = 0, 2001 = 1, ...)<br>
+    * bits [7:0] API implemention week.<br>
+    * Example: API specification version 4.0, implementation w46 2008 => 0x0400082E
+    */
+	uint32_t api_version;
+
+    /** maximum block count which can be transferred at once */
+	uint32_t max_block_count;
+
+    /** maximum clock frequence in Hz supported by HW */
+	uint32_t max_clock_freq;
+
+    /** maximum data bus width supported by HW */
+	uint16_t max_data_width;
+
+    /** Is high-speed mode supported by HW (yes=1, no=0) */
+	uint8_t hs_mode_supported;
+
+    /** Is memory card removable (yes=1, no=0) */
+	uint8_t card_removable;
+
+} HAL_MEMCARD_HW_CONF;
+
+/** @brief Configuration structure to HAL layer.
+ */
+typedef struct {
+    /** how many times to try after fail, for instance sending command */
+	uint32_t retries_after_fail;
+} HAL_MEMCARD_INIT_CONF;
+
+/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
+
+/* ************************** FUNCTION PROTOTYPES ************************** */
+
+/* ********************************* CODE ********************************** */
+
+#endif /* __EMMC_HAL_H__ */
+
+/* ******************************** END ************************************ */
diff --git a/drivers/renesas/rcar/emmc/emmc_init.c b/drivers/renesas/rcar/emmc/emmc_init.c
new file mode 100644
index 0000000..386fb1e
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_init.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stddef.h>
+#include <mmio.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+#include "rcar_private.h"
+
+st_mmc_base mmc_drv_obj;
+
+EMMC_ERROR_CODE rcar_emmc_memcard_power(uint8_t mode)
+{
+
+	if (mode == TRUE) {
+		/* power on (Vcc&Vccq is always power on) */
+		mmc_drv_obj.card_power_enable = TRUE;
+	} else {
+		/* power off (Vcc&Vccq is always power on) */
+		mmc_drv_obj.card_power_enable = FALSE;
+		mmc_drv_obj.mount = FALSE;
+		mmc_drv_obj.selected = FALSE;
+	}
+
+	return EMMC_SUCCESS;
+}
+static __inline void emmc_set_retry_count(uint32_t retry)
+{
+	mmc_drv_obj.retries_after_fail = retry;
+}
+
+static __inline void emmc_set_data_timeout(uint32_t data_timeout)
+{
+	mmc_drv_obj.data_timeout = data_timeout;
+}
+
+static void emmc_memset(uint8_t *buff, uint8_t data, uint32_t cnt)
+{
+	if (buff == NULL) {
+		return;
+	}
+
+	while (cnt > 0) {
+		*buff++ = data;
+		cnt--;
+	}
+}
+
+static void emmc_driver_config(void)
+{
+	emmc_set_retry_count(EMMC_RETRY_COUNT);
+	emmc_set_data_timeout(EMMC_RW_DATA_TIMEOUT);
+}
+
+static void emmc_drv_init(void)
+{
+	emmc_memset((uint8_t *) (&mmc_drv_obj), 0, sizeof(st_mmc_base));
+	mmc_drv_obj.card_present = HAL_MEMCARD_CARD_IS_IN;
+	mmc_drv_obj.data_timeout = EMMC_RW_DATA_TIMEOUT;
+	mmc_drv_obj.bus_width = HAL_MEMCARD_DATA_WIDTH_1_BIT;
+}
+
+static EMMC_ERROR_CODE emmc_dev_finalize(void)
+{
+	EMMC_ERROR_CODE result;
+	uint32_t dataL;
+
+	/* MMC power off
+	 * the power supply of eMMC device is always turning on.
+	 * RST_n : Hi --> Low level.
+	 */
+	result = rcar_emmc_memcard_power(FALSE);
+
+	/* host controller reset */
+	SETR_32(SD_INFO1, 0x00000000U);		/* all interrupt clear */
+	SETR_32(SD_INFO2, SD_INFO2_CLEAR);	/* all interrupt clear */
+	SETR_32(SD_INFO1_MASK, 0x00000000U);	/* all interrupt disable */
+	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
+	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* MMC clock stop */
+
+	dataL = mmio_read_32(CPG_SMSTPCR3);
+	if ((dataL & CPG_MSTP_MMC) == 0U) {
+		dataL |= (CPG_MSTP_MMC);
+		mmio_write_32(CPG_CPGWPR, (~dataL));
+		mmio_write_32(CPG_SMSTPCR3, dataL);
+	}
+
+	return result;
+}
+
+static EMMC_ERROR_CODE emmc_dev_init(void)
+{
+	/* Enable clock supply to eMMC. */
+	mstpcr_write(CPG_SMSTPCR3, CPG_MSTPSR3, CPG_MSTP_MMC);
+
+	/* Set SD clock */
+	mmio_write_32(CPG_CPGWPR, ~((uint32_t) (BIT9 | BIT0)));	/* SD phy 200MHz */
+
+	/* Stop SDnH clock & SDn=200MHz */
+	mmio_write_32(CPG_SDxCKCR, (BIT9 | BIT0));
+
+	/* MMCIF initialize */
+	SETR_32(SD_INFO1, 0x00000000U);		/* all interrupt clear */
+	SETR_32(SD_INFO2, SD_INFO2_CLEAR);	/* all interrupt clear */
+	SETR_32(SD_INFO1_MASK, 0x00000000U);	/* all interrupt disable */
+	SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* all interrupt disable */
+
+	SETR_32(HOST_MODE, 0x00000000U);	/* SD_BUF access width = 64-bit */
+	SETR_32(SD_OPTION, 0x0000C0EEU);	/* Bus width = 1bit, timeout=MAX */
+	SETR_32(SD_CLK_CTRL, 0x00000000U);	/* Automatic Control=Disable, Clock Output=Disable */
+
+	return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_reset_controller(void)
+{
+	EMMC_ERROR_CODE retult;
+
+	/* initialize mmc driver */
+	emmc_drv_init();
+
+	/* initialize H/W */
+	retult = emmc_dev_init();
+	if (EMMC_SUCCESS != retult) {
+		return retult;
+	}
+
+	mmc_drv_obj.initialize = TRUE;
+
+	return retult;
+
+}
+
+EMMC_ERROR_CODE emmc_terminate(void)
+{
+	EMMC_ERROR_CODE result;
+
+	result = emmc_dev_finalize();
+
+	emmc_memset((uint8_t *) (&mmc_drv_obj), 0, sizeof(st_mmc_base));
+
+	return result;
+}
+
+EMMC_ERROR_CODE rcar_emmc_init(void)
+{
+	EMMC_ERROR_CODE retult;
+
+	retult = emmc_reset_controller();
+	if (EMMC_SUCCESS != retult) {
+		return retult;
+	}
+
+	emmc_driver_config();
+
+	return EMMC_SUCCESS;
+}
diff --git a/drivers/renesas/rcar/emmc/emmc_interrupt.c b/drivers/renesas/rcar/emmc/emmc_interrupt.c
new file mode 100644
index 0000000..3077db4
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_interrupt.c
@@ -0,0 +1,217 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights
+ * reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+
+#include "emmc_config.h"
+#include "emmc_def.h"
+#include "emmc_hal.h"
+#include "emmc_registers.h"
+#include "emmc_std.h"
+#include "rcar_def.h"
+
+#include <mmio.h>
+#include <stddef.h>
+
+static EMMC_ERROR_CODE emmc_trans_sector(uint32_t *buff_address_virtual);
+
+uint32_t emmc_interrupt(void)
+{
+	EMMC_ERROR_CODE result;
+	uint32_t prr_data;
+	uint32_t cut_ver;
+	uint32_t end_bit;
+
+	prr_data = mmio_read_32((uintptr_t) RCAR_PRR);
+	cut_ver = prr_data & RCAR_CUT_MASK;
+	if ((prr_data & RCAR_PRODUCT_MASK) == RCAR_PRODUCT_H3) {
+		if (cut_ver == RCAR_CUT_VER10) {
+			end_bit = BIT17;
+		} else if (cut_ver == RCAR_CUT_VER11) {
+			end_bit = BIT17;
+		} else {
+			end_bit = BIT20;
+		}
+	} else if ((prr_data & RCAR_PRODUCT_MASK) == RCAR_PRODUCT_M3) {
+		if (cut_ver == RCAR_CUT_VER10) {
+			end_bit = BIT17;
+		} else {
+			end_bit = BIT20;
+		}
+	} else {
+		end_bit = BIT20;
+	}
+
+	/* SD_INFO */
+	mmc_drv_obj.error_info.info1 = GETR_32(SD_INFO1);
+	mmc_drv_obj.error_info.info2 = GETR_32(SD_INFO2);
+
+	/* SD_INFO EVENT */
+	mmc_drv_obj.int_event1 =
+	    mmc_drv_obj.error_info.info1 & GETR_32(SD_INFO1_MASK);
+	mmc_drv_obj.int_event2 =
+	    mmc_drv_obj.error_info.info2 & GETR_32(SD_INFO2_MASK);
+
+	/* ERR_STS */
+	mmc_drv_obj.error_info.status1 = GETR_32(SD_ERR_STS1);
+	mmc_drv_obj.error_info.status2 = GETR_32(SD_ERR_STS2);
+
+	/* DM_CM_INFO */
+	mmc_drv_obj.error_info.dm_info1 = GETR_32(DM_CM_INFO1);
+	mmc_drv_obj.error_info.dm_info2 = GETR_32(DM_CM_INFO2);
+
+	/* DM_CM_INFO EVENT */
+	mmc_drv_obj.dm_event1 =
+	    mmc_drv_obj.error_info.dm_info1 & GETR_32(DM_CM_INFO1_MASK);
+	mmc_drv_obj.dm_event2 =
+	    mmc_drv_obj.error_info.dm_info2 & GETR_32(DM_CM_INFO2_MASK);
+
+	/* ERR SD_INFO2 */
+	if ((SD_INFO2_ALL_ERR & mmc_drv_obj.int_event2) != 0) {
+		SETR_32(SD_INFO1_MASK, 0x00000000U);	/* interrupt disable */
+		SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);	/* interrupt disable */
+		SETR_32(SD_INFO1, 0x00000000U);	/* interrupt clear */
+		SETR_32(SD_INFO2, SD_INFO2_CLEAR);	/* interrupt clear */
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	}
+
+	/* PIO Transfer */
+	/* BWE/BRE */
+	else if (((SD_INFO2_BWE | SD_INFO2_BRE) & mmc_drv_obj.int_event2)) {
+		/* BWE */
+		if (SD_INFO2_BWE & mmc_drv_obj.int_event2) {
+			SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BWE));
+		}
+		/* BRE */
+		else {
+			SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BRE));
+		}
+
+		result = emmc_trans_sector(mmc_drv_obj.buff_address_virtual);
+		mmc_drv_obj.buff_address_virtual += EMMC_BLOCK_LENGTH;
+		mmc_drv_obj.remain_size -= EMMC_BLOCK_LENGTH;
+
+		if (result != EMMC_SUCCESS) {
+			/* data transfer error */
+			emmc_write_error_info(EMMC_FUNCNO_NONE, result);
+
+			/* Panic */
+			SETR_32(SD_INFO1_MASK, 0x00000000U);
+			SETR_32(SD_INFO2_MASK, SD_INFO2_CLEAR);
+			SETR_32(SD_INFO1, 0x00000000U);
+			/* interrupt clear */
+			SETR_32(SD_INFO2, SD_INFO2_CLEAR);
+			mmc_drv_obj.force_terminate = TRUE;
+		} else {
+			mmc_drv_obj.during_transfer = FALSE;
+		}
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	}
+
+	/* DMA_TRANSFER */
+	/* DM_CM_INFO1: DMA-ch0 transfer complete or error occurred */
+	else if ((BIT16 & mmc_drv_obj.dm_event1) != 0) {
+		SETR_32(DM_CM_INFO1, 0x00000000U);
+		SETR_32(DM_CM_INFO2, 0x00000000U);
+		/* interrupt clear */
+		SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BWE));
+		/* DM_CM_INFO2:  DMA-ch0 error occured */
+		if ((BIT16 & mmc_drv_obj.dm_event2) != 0) {
+			mmc_drv_obj.dma_error_flag = TRUE;
+		} else {
+			mmc_drv_obj.during_dma_transfer = FALSE;
+			mmc_drv_obj.during_transfer = FALSE;
+		}
+		/* wait next interrupt */
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	}
+	/* DM_CM_INFO1: DMA-ch1 transfer complete or error occured */
+	else if ((end_bit & mmc_drv_obj.dm_event1) != 0U) {
+		SETR_32(DM_CM_INFO1, 0x00000000U);
+		SETR_32(DM_CM_INFO2, 0x00000000U);
+		/* interrupt clear */
+		SETR_32(SD_INFO2, (GETR_32(SD_INFO2) & ~SD_INFO2_BRE));
+		/* DM_CM_INFO2: DMA-ch1 error occured */
+		if ((BIT17 & mmc_drv_obj.dm_event2) != 0) {
+			mmc_drv_obj.dma_error_flag = TRUE;
+		} else {
+			mmc_drv_obj.during_dma_transfer = FALSE;
+			mmc_drv_obj.during_transfer = FALSE;
+		}
+		/* wait next interrupt */
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	}
+
+	/* Response end  */
+	else if ((SD_INFO1_INFO0 & mmc_drv_obj.int_event1) != 0) {
+		/* interrupt clear */
+		SETR_32(SD_INFO1, (GETR_32(SD_INFO1) & ~SD_INFO1_INFO0));
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	}
+	/* Access end  */
+	else if ((SD_INFO1_INFO2 & mmc_drv_obj.int_event1) != 0) {
+		/* interrupt clear */
+		SETR_32(SD_INFO1, (GETR_32(SD_INFO1) & ~SD_INFO1_INFO2));
+		mmc_drv_obj.state_machine_blocking = FALSE;
+	} else {
+		/* nothing to do. */
+	}
+
+	return (uint32_t) 0;
+}
+
+static EMMC_ERROR_CODE emmc_trans_sector(uint32_t *buff_address_virtual)
+{
+	uint32_t length, i;
+	uint64_t *bufPtrLL;
+
+	if (buff_address_virtual == NULL) {
+		return EMMC_ERR_PARAM;
+	}
+
+	if ((mmc_drv_obj.during_transfer != TRUE)
+	    || (mmc_drv_obj.remain_size == 0)) {
+		return EMMC_ERR_STATE;
+	}
+
+	bufPtrLL = (uint64_t *) buff_address_virtual;
+	length = mmc_drv_obj.remain_size;
+
+	/* data transefer */
+	for (i = 0; i < (length >> 3); i++) {
+		/* Write */
+		if (mmc_drv_obj.cmd_info.dir == HAL_MEMCARD_WRITE) {
+			SETR_64(SD_BUF0, *bufPtrLL);	/* buffer --> FIFO */
+		}
+		/* Read */
+		else {
+			/* Checks when the read data reaches SD_SIZE. */
+			/* The BRE bit is cleared at emmc_interrupt function. */
+			if (((i %
+			      (uint32_t) (EMMC_BLOCK_LENGTH >>
+					  EMMC_BUF_SIZE_SHIFT)) == 0U)
+			    && (i != 0U)) {
+				/* BRE check */
+				while (((GETR_32(SD_INFO2)) & SD_INFO2_BRE) ==
+				       0U) {
+					/* ERROR check */
+					if (((GETR_32(SD_INFO2)) &
+					     SD_INFO2_ALL_ERR) != 0U) {
+						return EMMC_ERR_TRANSFER;
+					}
+				}
+				/* BRE clear */
+				SETR_32(SD_INFO2,
+					(uint32_t) (GETR_32(SD_INFO2) &
+						    ~SD_INFO2_BRE));
+			}
+			*bufPtrLL = GETR_64(SD_BUF0);	/* FIFO --> buffer */
+		}
+		bufPtrLL++;
+	}
+
+	return EMMC_SUCCESS;
+}
diff --git a/drivers/renesas/rcar/emmc/emmc_mount.c b/drivers/renesas/rcar/emmc/emmc_mount.c
new file mode 100644
index 0000000..9a7d2ca
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_mount.c
@@ -0,0 +1,680 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+#include "micro_delay.h"
+#include "rcar_def.h"
+
+static EMMC_ERROR_CODE emmc_clock_ctrl(uint8_t mode);
+static EMMC_ERROR_CODE emmc_card_init(void);
+static EMMC_ERROR_CODE emmc_high_speed(void);
+static EMMC_ERROR_CODE emmc_bus_width(uint32_t width);
+static uint32_t emmc_set_timeout_register_value(uint32_t freq);
+static void set_sd_clk(uint32_t clkDiv);
+static uint32_t emmc_calc_tran_speed(uint32_t *freq);
+static void emmc_get_partition_access(void);
+static void emmc_set_bootpartition(void);
+
+static void emmc_set_bootpartition(void)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	if (reg == RCAR_PRODUCT_M3_CUT10) {
+		mmc_drv_obj.boot_partition_en =
+		    (EMMC_PARTITION_ID) ((mmc_drv_obj.ext_csd_data[179] &
+					  EMMC_BOOT_PARTITION_EN_MASK) >>
+					 EMMC_BOOT_PARTITION_EN_SHIFT);
+	} else if ((reg == RCAR_PRODUCT_H3_CUT20)
+		   || (reg == RCAR_PRODUCT_M3_CUT11)) {
+		mmc_drv_obj.boot_partition_en = mmc_drv_obj.partition_access;
+	} else {
+		if ((mmio_read_32(MFISBTSTSR) & MFISBTSTSR_BOOT_PARTITION) !=
+		    0U) {
+			mmc_drv_obj.boot_partition_en = PARTITION_ID_BOOT_2;
+		} else {
+			mmc_drv_obj.boot_partition_en = PARTITION_ID_BOOT_1;
+		}
+	}
+}
+
+static EMMC_ERROR_CODE emmc_card_init(void)
+{
+	int32_t retry;
+	uint32_t freq = MMC_400KHZ;	/* 390KHz */
+	EMMC_ERROR_CODE result;
+	uint32_t resultCalc;
+
+	/* state check */
+	if ((mmc_drv_obj.initialize != TRUE)
+	    || (mmc_drv_obj.card_power_enable != TRUE)
+	    || ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0)
+	    ) {
+		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* clock on (force change) */
+	mmc_drv_obj.current_freq = 0;
+	mmc_drv_obj.max_freq = MMC_20MHZ;
+	result = emmc_set_request_mmc_clock(&freq);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return EMMC_ERR;
+	}
+
+	rcar_micro_delay(1000U);	/* wait 1ms */
+
+	/* Get current access partition */
+	emmc_get_partition_access();
+
+	/* CMD0, arg=0x00000000 */
+	result = emmc_send_idle_cmd(0x00000000);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	rcar_micro_delay(200U);	/* wait 74clock 390kHz(189.74us) */
+
+	/* CMD1 */
+	emmc_make_nontrans_cmd(CMD1_SEND_OP_COND, EMMC_HOST_OCR_VALUE);
+	for (retry = 300; retry > 0; retry--) {
+		result =
+		    emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+		if (result != EMMC_SUCCESS) {
+			emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+			return result;
+		}
+
+		if ((mmc_drv_obj.r3_ocr & EMMC_OCR_STATUS_BIT) != 0) {
+			break;	/* card is ready. exit loop */
+		}
+		rcar_micro_delay(1000U);	/* wait 1ms */
+	}
+
+	if (retry == 0) {
+		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR_TIMEOUT);
+		return EMMC_ERR_TIMEOUT;
+	}
+
+	switch (mmc_drv_obj.r3_ocr & EMMC_OCR_ACCESS_MODE_MASK) {
+	case EMMC_OCR_ACCESS_MODE_SECT:
+		mmc_drv_obj.access_mode = TRUE;	/* sector mode */
+		break;
+	default:
+		/* unknown value */
+		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT, EMMC_ERR);
+		return EMMC_ERR;
+	}
+
+	/* CMD2 */
+	emmc_make_nontrans_cmd(CMD2_ALL_SEND_CID_MMC, 0x00000000);
+	mmc_drv_obj.response = (uint32_t *) (&mmc_drv_obj.cid_data[0]);	/* use CID special buffer */
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	/* CMD3 */
+	emmc_make_nontrans_cmd(CMD3_SET_RELATIVE_ADDR, EMMC_RCA << 16);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	/* CMD9 (CSD) */
+	emmc_make_nontrans_cmd(CMD9_SEND_CSD, EMMC_RCA << 16);
+	mmc_drv_obj.response = (uint32_t *) (&mmc_drv_obj.csd_data[0]);	/* use CSD special buffer */
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	/* card version check */
+	if (EMMC_CSD_SPEC_VARS() < 4) {
+		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT,
+				      EMMC_ERR_ILLEGAL_CARD);
+		return EMMC_ERR_ILLEGAL_CARD;
+	}
+
+	/* CMD7 (select card) */
+	emmc_make_nontrans_cmd(CMD7_SELECT_CARD, EMMC_RCA << 16);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	mmc_drv_obj.selected = TRUE;
+
+	/* card speed check */
+	resultCalc = emmc_calc_tran_speed(&freq);	/* Card spec is calculated from TRAN_SPEED(CSD).  */
+	if (resultCalc == 0) {
+		emmc_write_error_info(EMMC_FUNCNO_CARD_INIT,
+				      EMMC_ERR_ILLEGAL_CARD);
+		return EMMC_ERR_ILLEGAL_CARD;
+	}
+	mmc_drv_obj.max_freq = freq;	/* max frequency (card spec) */
+
+	result = emmc_set_request_mmc_clock(&freq);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return EMMC_ERR;
+	}
+
+	/* set read/write timeout */
+	mmc_drv_obj.data_timeout = emmc_set_timeout_register_value(freq);
+	SETR_32(SD_OPTION,
+		((GETR_32(SD_OPTION) & ~(SD_OPTION_TIMEOUT_CNT_MASK)) |
+		 mmc_drv_obj.data_timeout));
+
+	/* SET_BLOCKLEN(512byte) */
+	/* CMD16 */
+	emmc_make_nontrans_cmd(CMD16_SET_BLOCKLEN, EMMC_BLOCK_LENGTH);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	/* Transfer Data Length */
+	SETR_32(SD_SIZE, EMMC_BLOCK_LENGTH);
+
+	/* CMD8 (EXT_CSD) */
+	emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+			    (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+			    EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+			    HAL_MEMCARD_NOT_DMA);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		/* CMD12 is not send.
+		 * If BUS initialization is failed, user must be execute Bus initialization again.
+		 * Bus initialization is start CMD0(soft reset command).
+		 */
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		return result;
+	}
+
+	/* Set boot partition */
+	emmc_set_bootpartition();
+
+	return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_high_speed(void)
+{
+	uint32_t freq;	      /**< High speed mode clock frequency */
+	EMMC_ERROR_CODE result;
+	uint8_t cardType;
+
+	/* state check */
+	if (mmc_drv_obj.selected != TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_HIGH_SPEED, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* max frequency */
+	cardType = (uint8_t) mmc_drv_obj.ext_csd_data[EMMC_EXT_CSD_CARD_TYPE];
+	if ((cardType & EMMC_EXT_CSD_CARD_TYPE_52MHZ) != 0)
+		freq = MMC_52MHZ;
+	else if ((cardType & EMMC_EXT_CSD_CARD_TYPE_26MHZ) != 0)
+		freq = MMC_26MHZ;
+	else
+		freq = MMC_20MHZ;
+
+	/* Hi-Speed-mode selction */
+	if ((MMC_52MHZ == freq) || (MMC_26MHZ == freq)) {
+		/* CMD6 */
+		emmc_make_nontrans_cmd(CMD6_SWITCH, EMMC_SWITCH_HS_TIMING);
+		result =
+		    emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+		if (result != EMMC_SUCCESS) {
+			emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+			return result;
+		}
+
+		mmc_drv_obj.hs_timing = TIMING_HIGH_SPEED;	/* High-Speed */
+	}
+
+	/* set mmc clock */
+	mmc_drv_obj.max_freq = freq;
+	result = emmc_set_request_mmc_clock(&freq);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+		return EMMC_ERR;
+	}
+
+	/* set read/write timeout */
+	mmc_drv_obj.data_timeout = emmc_set_timeout_register_value(freq);
+	SETR_32(SD_OPTION,
+		((GETR_32(SD_OPTION) & ~(SD_OPTION_TIMEOUT_CNT_MASK)) |
+		 mmc_drv_obj.data_timeout));
+
+	/* CMD13 */
+	emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+	result =
+	    emmc_exec_cmd(EMMC_R1_ERROR_MASK_WITHOUT_CRC, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+		return result;
+	}
+
+	return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_clock_ctrl(uint8_t mode)
+{
+	uint32_t value;
+
+	/* busy check */
+	if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0) {
+		emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK,
+				      EMMC_ERR_CARD_BUSY);
+		return EMMC_ERR;
+	}
+
+	if (mode == TRUE) {
+		/* clock ON */
+		value =
+		    ((GETR_32(SD_CLK_CTRL) | MMC_SD_CLK_START) &
+		     SD_CLK_WRITE_MASK);
+		SETR_32(SD_CLK_CTRL, value);	/* on  */
+		mmc_drv_obj.clock_enable = TRUE;
+	} else {
+		/* clock OFF */
+		value =
+		    ((GETR_32(SD_CLK_CTRL) & MMC_SD_CLK_STOP) &
+		     SD_CLK_WRITE_MASK);
+		SETR_32(SD_CLK_CTRL, value);	/* off */
+		mmc_drv_obj.clock_enable = FALSE;
+	}
+
+	return EMMC_SUCCESS;
+}
+
+static EMMC_ERROR_CODE emmc_bus_width(uint32_t width)
+{
+	EMMC_ERROR_CODE result = EMMC_ERR;
+
+	/* parameter check */
+	if ((width != 8) && (width != 4) && (width != 1)) {
+		emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* state check */
+	if (mmc_drv_obj.selected != TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	mmc_drv_obj.bus_width = (HAL_MEMCARD_DATA_WIDTH) (width >> 2);	/* 2 = 8bit, 1 = 4bit, 0 =1bit */
+
+	/* CMD6 */
+	emmc_make_nontrans_cmd(CMD6_SWITCH,
+			       (EMMC_SWITCH_BUS_WIDTH_1 |
+				(mmc_drv_obj.bus_width << 8)));
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		/* occurred error */
+		mmc_drv_obj.bus_width = HAL_MEMCARD_DATA_WIDTH_1_BIT;
+		goto EXIT;
+	}
+
+	switch (mmc_drv_obj.bus_width) {
+	case HAL_MEMCARD_DATA_WIDTH_1_BIT:
+		SETR_32(SD_OPTION,
+			((GETR_32(SD_OPTION) & ~(BIT15 | BIT13)) | BIT15));
+		break;
+	case HAL_MEMCARD_DATA_WIDTH_4_BIT:
+		SETR_32(SD_OPTION, (GETR_32(SD_OPTION) & ~(BIT15 | BIT13)));
+		break;
+	case HAL_MEMCARD_DATA_WIDTH_8_BIT:
+		SETR_32(SD_OPTION,
+			((GETR_32(SD_OPTION) & ~(BIT15 | BIT13)) | BIT13));
+		break;
+	default:
+		goto EXIT;
+	}
+
+	/* CMD13 */
+	emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		goto EXIT;
+	}
+
+	/* CMD8 (EXT_CSD) */
+	emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+			    (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+			    EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+			    HAL_MEMCARD_NOT_DMA);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		goto EXIT;
+	}
+
+	return EMMC_SUCCESS;
+
+EXIT:
+
+	emmc_write_error_info(EMMC_FUNCNO_BUS_WIDTH, result);
+	ERROR("BL2: emmc bus_width error end\n");
+	return result;
+}
+
+EMMC_ERROR_CODE emmc_select_partition(EMMC_PARTITION_ID id)
+{
+	EMMC_ERROR_CODE result;
+	uint32_t arg;
+	uint32_t partition_config;
+
+	/* state check */
+	if (mmc_drv_obj.mount != TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_NONE, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* id = PARTITION_ACCESS(Bit[2:0]) */
+	if ((id & ~PARTITION_ID_MASK) != 0) {
+		emmc_write_error_info(EMMC_FUNCNO_NONE, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* EXT_CSD[179] value */
+	partition_config =
+	    (uint32_t) mmc_drv_obj.ext_csd_data[EMMC_EXT_CSD_PARTITION_CONFIG];
+	if ((partition_config & PARTITION_ID_MASK) == id) {
+		result = EMMC_SUCCESS;
+	} else {
+
+		partition_config =
+		    (uint32_t) ((partition_config & ~PARTITION_ID_MASK) | id);
+		arg = EMMC_SWITCH_PARTITION_CONFIG | (partition_config << 8);
+
+		result = emmc_set_ext_csd(arg);
+	}
+
+	return result;
+}
+
+static void set_sd_clk(uint32_t clkDiv)
+{
+	uint32_t dataL;
+
+	dataL = (GETR_32(SD_CLK_CTRL) & (~SD_CLK_CTRL_CLKDIV_MASK));
+
+	switch (clkDiv) {
+	case 1:
+		dataL |= 0x000000FFU;
+		break;		/* 1/1   */
+	case 2:
+		dataL |= 0x00000000U;
+		break;		/* 1/2   */
+	case 4:
+		dataL |= 0x00000001U;
+		break;		/* 1/4   */
+	case 8:
+		dataL |= 0x00000002U;
+		break;		/* 1/8   */
+	case 16:
+		dataL |= 0x00000004U;
+		break;		/* 1/16  */
+	case 32:
+		dataL |= 0x00000008U;
+		break;		/* 1/32  */
+	case 64:
+		dataL |= 0x00000010U;
+		break;		/* 1/64  */
+	case 128:
+		dataL |= 0x00000020U;
+		break;		/* 1/128 */
+	case 256:
+		dataL |= 0x00000040U;
+		break;		/* 1/256 */
+	case 512:
+		dataL |= 0x00000080U;
+		break;		/* 1/512 */
+	}
+
+	SETR_32(SD_CLK_CTRL, dataL);
+	mmc_drv_obj.current_freq = (uint32_t) clkDiv;
+}
+
+static void emmc_get_partition_access(void)
+{
+	uint32_t reg;
+	EMMC_ERROR_CODE result;
+
+	reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	if ((reg == RCAR_PRODUCT_H3_CUT20) || (reg == RCAR_PRODUCT_M3_CUT11)) {
+		SETR_32(SD_OPTION, 0x000060EEU);	/* 8 bits width */
+		/* CMD8 (EXT_CSD) */
+		emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000U,
+				    (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+				    EMMC_MAX_EXT_CSD_LENGTH,
+				    HAL_MEMCARD_READ, HAL_MEMCARD_NOT_DMA);
+		mmc_drv_obj.get_partition_access_flag = TRUE;
+		result =
+		    emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+		mmc_drv_obj.get_partition_access_flag = FALSE;
+		if (result == EMMC_SUCCESS) {
+			mmc_drv_obj.partition_access =
+			    (EMMC_PARTITION_ID) (mmc_drv_obj.ext_csd_data[179]
+						 & PARTITION_ID_MASK);
+		} else if (result == EMMC_ERR_CMD_TIMEOUT) {
+			mmc_drv_obj.partition_access = PARTITION_ID_BOOT_1;
+		} else {
+			emmc_write_error_info(EMMC_FUNCNO_GET_PERTITION_ACCESS,
+					      result);
+			panic();
+		}
+		SETR_32(SD_OPTION, 0x0000C0EEU);	/* Initialize */
+	}
+}
+
+static uint32_t emmc_calc_tran_speed(uint32_t *freq)
+{
+	const uint32_t unit[8] = { 10000, 100000, 1000000, 10000000,
+				0, 0, 0, 0 };   /**< frequency unit (1/10) */
+	const uint32_t mult[16] = { 0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45,
+				52, 55, 60, 70, 80 };
+
+	uint32_t maxFreq;
+	uint32_t result;
+	uint32_t tran_speed = EMMC_CSD_TRAN_SPEED();
+
+	/* tran_speed = 0x32
+	 * unit[tran_speed&0x7] = uint[0x2] = 1000000
+	 * mult[(tran_speed&0x78)>>3] = mult[0x30>>3] = mult[6] = 26
+	 * 1000000 * 26 = 26000000 (26MHz)
+	 */
+
+	result = 1;
+	maxFreq =
+	    unit[tran_speed & EMMC_TRANSPEED_FREQ_UNIT_MASK] *
+	    mult[(tran_speed & EMMC_TRANSPEED_MULT_MASK) >>
+		 EMMC_TRANSPEED_MULT_SHIFT];
+
+	if (maxFreq == 0) {
+		result = 0;
+	} else if (MMC_FREQ_52MHZ <= maxFreq)
+		*freq = MMC_52MHZ;
+	else if (MMC_FREQ_26MHZ <= maxFreq)
+		*freq = MMC_26MHZ;
+	else if (MMC_FREQ_20MHZ <= maxFreq)
+		*freq = MMC_20MHZ;
+	else
+		*freq = MMC_400KHZ;
+
+	return result;
+}
+
+static uint32_t emmc_set_timeout_register_value(uint32_t freq)
+{
+	uint32_t timeoutCnt;	/* SD_OPTION   - Timeout Counter  */
+
+	switch (freq) {
+	case 1U:
+		timeoutCnt = 0xE0U;
+		break;		/* SDCLK * 2^27 */
+	case 2U:
+		timeoutCnt = 0xE0U;
+		break;		/* SDCLK * 2^27 */
+	case 4U:
+		timeoutCnt = 0xD0U;
+		break;		/* SDCLK * 2^26 */
+	case 8U:
+		timeoutCnt = 0xC0U;
+		break;		/* SDCLK * 2^25 */
+	case 16U:
+		timeoutCnt = 0xB0U;
+		break;		/* SDCLK * 2^24 */
+	case 32U:
+		timeoutCnt = 0xA0U;
+		break;		/* SDCLK * 2^23 */
+	case 64U:
+		timeoutCnt = 0x90U;
+		break;		/* SDCLK * 2^22 */
+	case 128U:
+		timeoutCnt = 0x80U;
+		break;		/* SDCLK * 2^21 */
+	case 256U:
+		timeoutCnt = 0x70U;
+		break;		/* SDCLK * 2^20 */
+	case 512U:
+		timeoutCnt = 0x70U;
+		break;		/* SDCLK * 2^20 */
+	default:
+		timeoutCnt = 0xE0U;
+		break;		/* SDCLK * 2^27 */
+	}
+
+	return timeoutCnt;
+}
+
+EMMC_ERROR_CODE emmc_set_ext_csd(uint32_t arg)
+{
+	EMMC_ERROR_CODE result;
+
+	/* CMD6 */
+	emmc_make_nontrans_cmd(CMD6_SWITCH, arg);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+
+	/* CMD13 */
+	emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+
+	/* CMD8 (EXT_CSD) */
+	emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000,
+			    (uint32_t *) (&mmc_drv_obj.ext_csd_data[0]),
+			    EMMC_MAX_EXT_CSD_LENGTH, HAL_MEMCARD_READ,
+			    HAL_MEMCARD_NOT_DMA);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+	return EMMC_SUCCESS;
+}
+
+EMMC_ERROR_CODE emmc_set_request_mmc_clock(uint32_t *freq)
+{
+	/* parameter check */
+	if (freq == NULL) {
+		emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* state check */
+	if ((mmc_drv_obj.initialize != TRUE)
+	    || (mmc_drv_obj.card_power_enable != TRUE)) {
+		emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* clock is already running in the desired frequency. */
+	if ((mmc_drv_obj.clock_enable == TRUE)
+	    && (mmc_drv_obj.current_freq == *freq)) {
+		return EMMC_SUCCESS;
+	}
+
+	/* busy check */
+	if ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0) {
+		emmc_write_error_info(EMMC_FUNCNO_SET_CLOCK,
+				      EMMC_ERR_CARD_BUSY);
+		return EMMC_ERR;
+	}
+
+	set_sd_clk(*freq);
+	mmc_drv_obj.clock_enable = FALSE;
+
+	return emmc_clock_ctrl(TRUE);	/* clock on */
+}
+
+EMMC_ERROR_CODE rcar_emmc_mount(void)
+{
+	EMMC_ERROR_CODE result;
+
+	/* state check */
+	if ((mmc_drv_obj.initialize != TRUE)
+	    || (mmc_drv_obj.card_power_enable != TRUE)
+	    || ((GETR_32(SD_INFO2) & SD_INFO2_CBSY) != 0)
+	    ) {
+		emmc_write_error_info(EMMC_FUNCNO_MOUNT, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* initialize card (IDLE state --> Transfer state) */
+	result = emmc_card_init();
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_CARD_INIT);
+		if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+			/* nothing to do. */
+		}
+		return result;
+	}
+
+	/* Switching high speed mode */
+	result = emmc_high_speed();
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_HIGH_SPEED);
+		if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+			/* nothing to do. */
+		}
+		return result;
+	}
+
+	/* Changing the data bus width */
+	result = emmc_bus_width(8);
+	if (result != EMMC_SUCCESS) {
+		emmc_write_error_info_func_no(EMMC_FUNCNO_BUS_WIDTH);
+		if (emmc_clock_ctrl(FALSE) != EMMC_SUCCESS) {
+			/* nothing to do. */
+		}
+		return result;
+	}
+
+	/* mount complete */
+	mmc_drv_obj.mount = TRUE;
+
+	return EMMC_SUCCESS;
+}
diff --git a/drivers/renesas/rcar/emmc/emmc_read.c b/drivers/renesas/rcar/emmc/emmc_read.c
new file mode 100644
index 0000000..b11c2c4
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_read.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch_helpers.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+
+#define MIN_EMMC(a, b)        (((a) < (b)) ? (a) : (b))
+#define EMMC_RW_SECTOR_COUNT_MAX        0x0000ffffU
+
+static EMMC_ERROR_CODE emmc_multiple_block_read (uint32_t *buff_address_virtual,
+		uint32_t sector_number, uint32_t count,
+		HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode)
+{
+	EMMC_ERROR_CODE result;
+
+	/* parameter check */
+	if ((count > EMMC_RW_SECTOR_COUNT_MAX)
+	    || (count == 0)
+	    || ((transfer_mode != HAL_MEMCARD_DMA)
+		&& (transfer_mode != HAL_MEMCARD_NOT_DMA))
+	    ) {
+		emmc_write_error_info(EMMC_FUNCNO_READ_SECTOR, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* CMD23 */
+	emmc_make_nontrans_cmd(CMD23_SET_BLOCK_COUNT, count);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+	SETR_32(SD_SECCNT, count);
+	SETR_32(SD_STOP, 0x00000100);
+	SETR_32(CC_EXT_MODE, (CC_EXT_MODE_CLEAR | CC_EXT_MODE_DMASDRW_ENABLE));	/* SD_BUF Read/Write DMA Transfer enable */
+
+	/* CMD18 */
+	emmc_make_trans_cmd(CMD18_READ_MULTIPLE_BLOCK, sector_number,
+			    buff_address_virtual,
+			    count << EMMC_SECTOR_SIZE_SHIFT, HAL_MEMCARD_READ,
+			    transfer_mode);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;	/* CMD18 error code */
+	}
+
+	/* CMD13 */
+	emmc_make_nontrans_cmd(CMD13_SEND_STATUS, EMMC_RCA << 16);
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+#if RCAR_BL2_DCACHE == 1
+	if (transfer_mode == HAL_MEMCARD_NOT_DMA) {
+		flush_dcache_range((uint64_t) buff_address_virtual,
+				   ((size_t) count << EMMC_SECTOR_SIZE_SHIFT));
+	}
+#endif /* RCAR_BL2_DCACHE == 1 */
+
+	/* ready status check */
+	if ((mmc_drv_obj.r1_card_status & EMMC_R1_READY) == 0) {
+		emmc_write_error_info(EMMC_FUNCNO_READ_SECTOR,
+				      EMMC_ERR_CARD_BUSY);
+		return EMMC_ERR_CARD_BUSY;
+	}
+
+	/* state check */
+	if (mmc_drv_obj.current_state != EMMC_R1_STATE_TRAN) {
+		emmc_write_error_info(EMMC_FUNCNO_READ_SECTOR,
+				      EMMC_ERR_CARD_STATE);
+		return EMMC_ERR_CARD_STATE;
+	}
+
+	return EMMC_SUCCESS;
+}
+
+EMMC_ERROR_CODE emmc_read_sector(uint32_t *buff_address_virtual,
+				 uint32_t sector_number,
+				 uint32_t count, uint32_t feature_flags)
+{
+	uint32_t trans_count;
+	uint32_t remain;
+	EMMC_ERROR_CODE result;
+	HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode;
+
+	/* parameter check */
+	if (count == 0) {
+		emmc_write_error_info(EMMC_FUNCNO_READ_SECTOR, EMMC_ERR_PARAM);
+		return EMMC_ERR_PARAM;
+	}
+
+	/* state check */
+	if (mmc_drv_obj.mount != TRUE) {
+		emmc_write_error_info(EMMC_FUNCNO_READ_SECTOR, EMMC_ERR_STATE);
+		return EMMC_ERR_STATE;
+	}
+
+	/* DMA? */
+	if ((feature_flags & LOADIMAGE_FLAGS_DMA_ENABLE) != 0) {
+		transfer_mode = HAL_MEMCARD_DMA;
+	} else {
+		transfer_mode = HAL_MEMCARD_NOT_DMA;
+	}
+
+	remain = count;
+	while (remain != 0) {
+		trans_count = MIN_EMMC(remain, EMMC_RW_SECTOR_COUNT_MAX);
+		result =
+		    emmc_multiple_block_read(buff_address_virtual,
+					     sector_number, trans_count,
+					     transfer_mode);
+		if (result != EMMC_SUCCESS) {
+			return result;
+		}
+
+		buff_address_virtual += (EMMC_BLOCK_LENGTH_DW * trans_count);
+		sector_number += trans_count;
+		remain -= trans_count;
+	}
+
+	return EMMC_SUCCESS;
+}
diff --git a/drivers/renesas/rcar/emmc/emmc_registers.h b/drivers/renesas/rcar/emmc/emmc_registers.h
new file mode 100644
index 0000000..a670ab7
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_registers.h
@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file  emmc_registers.h
+ * @brief emmc boot driver is expecting this header file. HS-MMC module header file.
+ *
+ */
+
+#ifndef __EMMC_REGISTERS_H__
+#define __EMMC_REGISTERS_H__
+
+/* ************************ HEADER (INCLUDE) SECTION *********************** */
+
+/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
+
+/* MMC channel select */
+#define MMC_CH0		(0U)	/* SDHI2/MMC0 */
+#define MMC_CH1		(1U)	/* SDHI3/MMC1 */
+
+#if RCAR_LSI == RCAR_E3
+#define USE_MMC_CH	(MMC_CH1)	/* R-Car E3 */
+#else /* RCAR_LSI == RCAR_E3 */
+#define USE_MMC_CH	(MMC_CH0)	/* R-Car H3/M3/M3N */
+#endif /* RCAR_LSI == RCAR_E3 */
+
+#define		BIT0	(0x00000001U)
+#define		BIT1	(0x00000002U)
+#define		BIT2	(0x00000004U)
+#define		BIT3	(0x00000008U)
+#define		BIT4	(0x00000010U)
+#define		BIT5	(0x00000020U)
+#define		BIT6	(0x00000040U)
+#define		BIT7	(0x00000080U)
+#define		BIT8	(0x00000100U)
+#define		BIT9	(0x00000200U)
+#define		BIT10	(0x00000400U)
+#define		BIT11	(0x00000800U)
+#define		BIT12	(0x00001000U)
+#define		BIT13	(0x00002000U)
+#define		BIT14	(0x00004000U)
+#define		BIT15	(0x00008000U)
+#define		BIT16	(0x00010000U)
+#define		BIT17	(0x00020000U)
+#define		BIT18	(0x00040000U)
+#define		BIT19	(0x00080000U)
+#define		BIT20	(0x00100000U)
+#define		BIT21	(0x00200000U)
+#define		BIT22	(0x00400000U)
+#define		BIT23	(0x00800000U)
+#define		BIT24	(0x01000000U)
+#define		BIT25	(0x02000000U)
+#define		BIT26	(0x04000000U)
+#define		BIT27	(0x08000000U)
+#define		BIT28	(0x10000000U)
+#define		BIT29	(0x20000000U)
+#define		BIT30	(0x40000000U)
+#define		BIT31	(0x80000000U)
+
+/** @brief Clock Pulse Generator (CPG) registers
+ */
+#define	CPG_BASE		(0xE6150000U)
+
+#define	CPG_MSTPSR3		(CPG_BASE+0x0048U)	/* Module stop status register 3 */
+
+#define	CPG_SMSTPCR3		(CPG_BASE+0x013CU)	/* System module stop control register 3 */
+
+#define	CPG_SD2CKCR		(CPG_BASE+0x0268U)	/* SDHI2 clock frequency control register */
+#define CPG_SD3CKCR		(CPG_BASE+0x026CU)	/* SDHI3 clock frequency control register */
+
+#define	CPG_CPGWPR		(CPG_BASE+0x0900U)	/* CPG Write Protect Register */
+
+#if USE_MMC_CH == MMC_CH0
+#define	CPG_SDxCKCR		(CPG_SD2CKCR)	/* SDHI2/MMC0 */
+#else /* USE_MMC_CH == MMC_CH0 */
+#define	CPG_SDxCKCR		(CPG_SD3CKCR)	/* SDHI3/MMC1 */
+#endif /* USE_MMC_CH == MMC_CH0 */
+
+/** Boot Status register
+ */
+#define  MFISBTSTSR			(0xE6260604U)
+
+#define  MFISBTSTSR_BOOT_PARTITION	(0x00000010U)
+
+/** brief eMMC registers
+ */
+#define	MMC0_SD_BASE		(0xEE140000U)
+#define MMC1_SD_BASE		(0xEE160000U)
+
+#if USE_MMC_CH == MMC_CH0
+#define	MMC_SD_BASE		(MMC0_SD_BASE)
+#else /* USE_MMC_CH == MMC_CH0 */
+#define	MMC_SD_BASE		(MMC1_SD_BASE)
+#endif /* USE_MMC_CH == MMC_CH0 */
+
+#define SD_CMD			(MMC_SD_BASE + 0x0000U)
+#define SD_PORTSEL		(MMC_SD_BASE + 0x0008U)
+#define SD_ARG			(MMC_SD_BASE + 0x0010U)
+#define SD_ARG1			(MMC_SD_BASE + 0x0018U)
+#define SD_STOP			(MMC_SD_BASE + 0x0020U)
+#define SD_SECCNT		(MMC_SD_BASE + 0x0028U)
+#define SD_RSP10		(MMC_SD_BASE + 0x0030U)
+#define SD_RSP1			(MMC_SD_BASE + 0x0038U)
+#define SD_RSP32		(MMC_SD_BASE + 0x0040U)
+#define SD_RSP3			(MMC_SD_BASE + 0x0048U)
+#define SD_RSP54		(MMC_SD_BASE + 0x0050U)
+#define SD_RSP5			(MMC_SD_BASE + 0x0058U)
+#define SD_RSP76		(MMC_SD_BASE + 0x0060U)
+#define SD_RSP7			(MMC_SD_BASE + 0x0068U)
+#define SD_INFO1		(MMC_SD_BASE + 0x0070U)
+#define SD_INFO2		(MMC_SD_BASE + 0x0078U)
+#define SD_INFO1_MASK		(MMC_SD_BASE + 0x0080U)
+#define SD_INFO2_MASK		(MMC_SD_BASE + 0x0088U)
+#define SD_CLK_CTRL		(MMC_SD_BASE + 0x0090U)
+#define SD_SIZE			(MMC_SD_BASE + 0x0098U)
+#define SD_OPTION		(MMC_SD_BASE + 0x00A0U)
+#define SD_ERR_STS1		(MMC_SD_BASE + 0x00B0U)
+#define SD_ERR_STS2		(MMC_SD_BASE + 0x00B8U)
+#define SD_BUF0			(MMC_SD_BASE + 0x00C0U)
+#define SDIO_MODE		(MMC_SD_BASE + 0x00D0U)
+#define SDIO_INFO1		(MMC_SD_BASE + 0x00D8U)
+#define SDIO_INFO1_MASK		(MMC_SD_BASE + 0x00E0U)
+#define CC_EXT_MODE		(MMC_SD_BASE + 0x0360U)
+#define SOFT_RST		(MMC_SD_BASE + 0x0380U)
+#define VERSION			(MMC_SD_BASE + 0x0388U)
+#define HOST_MODE		(MMC_SD_BASE + 0x0390U)
+#define DM_CM_DTRAN_MODE	(MMC_SD_BASE + 0x0820U)
+#define DM_CM_DTRAN_CTRL	(MMC_SD_BASE + 0x0828U)
+#define DM_CM_RST		(MMC_SD_BASE + 0x0830U)
+#define DM_CM_INFO1		(MMC_SD_BASE + 0x0840U)
+#define DM_CM_INFO1_MASK	(MMC_SD_BASE + 0x0848U)
+#define DM_CM_INFO2		(MMC_SD_BASE + 0x0850U)
+#define DM_CM_INFO2_MASK	(MMC_SD_BASE + 0x0858U)
+#define DM_DTRAN_ADDR		(MMC_SD_BASE + 0x0880U)
+
+/** @brief SD_INFO1 Registers
+ */
+#define SD_INFO1_HPIRES				0x00010000UL	/* Response Reception Completion        */
+#define SD_INFO1_INFO10				0x00000400UL	/* Indicates the SDDAT3 state           */
+#define SD_INFO1_INFO9				0x00000200UL	/* SDDAT3 Card Insertion                        */
+#define SD_INFO1_INFO8				0x00000100UL	/* SDDAT3 Card Removal                          */
+#define SD_INFO1_INFO7				0x00000080UL	/* Write Protect                                        */
+#define SD_INFO1_INFO5				0x00000020UL	/* Indicates the ISDCD state            */
+#define SD_INFO1_INFO4				0x00000010UL	/* ISDCD Card Insertion                         */
+#define SD_INFO1_INFO3				0x00000008UL	/* ISDCD Card Removal                           */
+#define SD_INFO1_INFO2				0x00000004UL	/* Access end                                           */
+#define SD_INFO1_INFO0				0x00000001UL	/* Response end                                         */
+
+/** @brief SD_INFO2 Registers
+ */
+#define SD_INFO2_ILA				0x00008000UL	/* Illegal Access Error                 */
+#define SD_INFO2_CBSY				0x00004000UL	/* Command Type Register Busy   */
+#define SD_INFO2_SCLKDIVEN			0x00002000UL
+#define SD_INFO2_BWE				0x00000200UL	/* SD_BUF Write Enable                  */
+#define SD_INFO2_BRE				0x00000100UL	/* SD_BUF Read Enable                   */
+#define SD_INFO2_DAT0				0x00000080UL	/* SDDAT0                                               */
+#define SD_INFO2_ERR6				0x00000040UL	/* Response Timeout                             */
+#define SD_INFO2_ERR5				0x00000020UL	/* SD_BUF Illegal Read Access   */
+#define SD_INFO2_ERR4				0x00000010UL	/* SD_BUF Illegal Write Access  */
+#define SD_INFO2_ERR3				0x00000008UL	/* Data Timeout                                 */
+#define SD_INFO2_ERR2				0x00000004UL	/* END Error                                    */
+#define SD_INFO2_ERR1				0x00000002UL	/* CRC Error                                    */
+#define SD_INFO2_ERR0				0x00000001UL	/* CMD Error                                    */
+#define SD_INFO2_ALL_ERR			0x0000807FUL
+#define SD_INFO2_CLEAR				0x00000800UL	/* BIT11 The write value should always be 1. HWM_0003 */
+
+/** @brief SOFT_RST
+ */
+#define SOFT_RST_SDRST				0x00000001UL
+
+/** @brief SD_CLK_CTRL
+ */
+#define SD_CLK_CTRL_SDCLKOFFEN		0x00000200UL
+#define SD_CLK_CTRL_SCLKEN			0x00000100UL
+#define SD_CLK_CTRL_CLKDIV_MASK     0x000000FFUL
+#define SD_CLOCK_ENABLE             0x00000100UL
+#define SD_CLOCK_DISABLE            0x00000000UL
+#define SD_CLK_WRITE_MASK           0x000003FFUL
+#define SD_CLK_CLKDIV_CLEAR_MASK    0xFFFFFF0FUL
+
+/** @brief SD_OPTION
+ */
+#define SD_OPTION_TIMEOUT_CNT_MASK	0x000000F0UL
+
+/** @brief MMC Clock Frequency
+ * 200MHz * 1/x = output clock
+ */
+#define MMC_CLK_OFF			0UL	/* Clock output is disabled                                                             */
+#define MMC_400KHZ			512UL	/* 200MHz * 1/512 = 390 KHz                             */
+#define MMC_20MHZ			16UL	/* 200MHz * 1/16   = 12.5 MHz Normal speed mode         */
+#define MMC_26MHZ			8UL	/* 200MHz * 1/8   = 25 MHz High speed mode 26Mhz        */
+#define MMC_52MHZ			4UL	/* 200MHz * 1/4   = 50 MHz High speed mode 52Mhz        */
+#define MMC_100MHZ			2UL	/* 200MHz * 1/2   = 100 MHz                             */
+#define MMC_200MHZ			1UL	/* 200MHz * 1/1   = 200 MHz                             */
+
+#define MMC_FREQ_52MHZ		52000000UL
+#define MMC_FREQ_26MHZ		26000000UL
+#define MMC_FREQ_20MHZ		20000000UL
+
+/** @brief MMC Clock DIV
+ */
+#define MMC_SD_CLK_START	0x00000100UL	/* CLOCK On             */
+#define MMC_SD_CLK_STOP		(~0x00000100UL)	/* CLOCK stop   */
+#define MMC_SD_CLK_DIV1		0x000000FFUL	/* 1/1          */
+#define MMC_SD_CLK_DIV2		0x00000000UL	/* 1/2          */
+#define MMC_SD_CLK_DIV4		0x00000001UL	/* 1/4          */
+#define MMC_SD_CLK_DIV8		0x00000002UL	/* 1/8          */
+#define MMC_SD_CLK_DIV16	0x00000004UL	/* 1/16         */
+#define MMC_SD_CLK_DIV32	0x00000008UL	/* 1/32         */
+#define MMC_SD_CLK_DIV64	0x00000010UL	/* 1/64         */
+#define MMC_SD_CLK_DIV128	0x00000020UL	/* 1/128        */
+#define MMC_SD_CLK_DIV256	0x00000040UL	/* 1/256        */
+#define MMC_SD_CLK_DIV512	0x00000080UL	/* 1/512        */
+
+/** @brief DM_CM_DTRAN_MODE
+ */
+#define DM_CM_DTRAN_MODE_CH0		0x00000000UL	/* CH0(downstream)      */
+#define DM_CM_DTRAN_MODE_CH1		0x00010000UL	/* CH1(upstream)        */
+#define DM_CM_DTRAN_MODE_BIT_WIDTH	0x00000030UL
+
+/** @brief CC_EXT_MODE
+ */
+#define CC_EXT_MODE_DMASDRW_ENABLE	0x00000002UL	/* SD_BUF Read/Write DMA Transfer */
+#define CC_EXT_MODE_CLEAR			0x00001010UL	/* BIT 12 & 4 always 1. */
+
+/** @brief DM_CM_INFO_MASK
+ */
+#define DM_CM_INFO_MASK_CLEAR		0xFFFCFFFEUL
+#define DM_CM_INFO_CH0_ENABLE		0x00010001UL
+#define DM_CM_INFO_CH1_ENABLE		0x00020001UL
+
+/** @brief DM_DTRAN_ADDR
+ */
+#define DM_DTRAN_ADDR_WRITE_MASK	0xFFFFFFF8UL
+
+/** @brief DM_CM_DTRAN_CTRL
+ */
+#define DM_CM_DTRAN_CTRL_START		0x00000001UL
+
+/** @brief SYSC Registers
+ */
+#if USE_MMC_CH == MMC_CH0
+#define CPG_MSTP_MMC		(BIT12)	/* SDHI2/MMC0 */
+#else /* USE_MMC_CH == MMC_CH0 */
+#define CPG_MSTP_MMC		(BIT11)	/* SDHI3/MMC1 */
+#endif /* USE_MMC_CH == MMC_CH0 */
+
+/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
+
+/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
+
+/* ************************** FUNCTION PROTOTYPES ************************** */
+
+/* ********************************* CODE ********************************** */
+
+#endif /* __EMMC_REGISTERS_H__ */
+/* ******************************** END ************************************ */
diff --git a/drivers/renesas/rcar/emmc/emmc_std.h b/drivers/renesas/rcar/emmc/emmc_std.h
new file mode 100644
index 0000000..f4ce198
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_std.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file  emmc_std.h
+ * @brief eMMC boot is expecting this header file
+ *
+ */
+
+#ifndef __EMMC_STD_H__
+#define __EMMC_STD_H__
+
+#include "emmc_hal.h"
+
+/* ************************ HEADER (INCLUDE) SECTION *********************** */
+
+/* ***************** MACROS, CONSTANTS, COMPILATION FLAGS ****************** */
+#ifndef FALSE
+#define FALSE	0U
+#endif
+#ifndef TRUE
+#define TRUE	1U
+#endif
+
+/** @brief 64bit registers
+ **/
+#define SETR_64(r, v)                   (*(volatile uint64_t *)(r) = (v))
+#define GETR_64(r)                      (*(volatile uint64_t *)(r))
+
+/** @brief 32bit registers
+ **/
+#define SETR_32(r, v)                   (*(volatile uint32_t *)(r) = (v))
+#define GETR_32(r)                      (*(volatile uint32_t *)(r))
+
+/** @brief 16bit registers
+ */
+#define SETR_16(r, v)                   (*(volatile uint16_t *)(r) = (v))
+#define GETR_16(r)                      (*(volatile uint16_t *)(r))
+
+/** @brief 8bit registers
+ */
+#define SETR_8(r, v)                    (*(volatile uint8_t *)(r) = (v))
+#define GETR_8(r)                       (*(volatile uint8_t *)(r))
+
+/** @brief CSD register Macros
+ */
+#define EMMC_GET_CID(x, y) (emmc_bit_field(mmc_drv_obj.cid_data, (x), (y)))
+
+#define EMMC_CID_MID()			(EMMC_GET_CID(127, 120))
+#define EMMC_CID_CBX()			(EMMC_GET_CID(113, 112))
+#define EMMC_CID_OID()			(EMMC_GET_CID(111, 104))
+#define EMMC_CID_PNM1()			(EMMC_GET_CID(103, 88))
+#define EMMC_CID_PNM2()			(EMMC_GET_CID(87, 56))
+#define EMMC_CID_PRV()			(EMMC_GET_CID(55, 48))
+#define EMMC_CID_PSN()			(EMMC_GET_CID(47, 16))
+#define EMMC_CID_MDT()			(EMMC_GET_CID(15, 8))
+#define EMMC_CID_CRC()			(EMMC_GET_CID(7, 1))
+
+/** @brief CSD register Macros
+ */
+#define EMMC_GET_CSD(x, y) (emmc_bit_field(mmc_drv_obj.csd_data, (x), (y)))
+
+#define EMMC_CSD_CSD_STRUCTURE()        (EMMC_GET_CSD(127, 126))
+#define EMMC_CSD_SPEC_VARS()            (EMMC_GET_CSD(125, 122))
+#define EMMC_CSD_TAAC()                 (EMMC_GET_CSD(119, 112))
+#define EMMC_CSD_NSAC()                 (EMMC_GET_CSD(111, 104))
+#define EMMC_CSD_TRAN_SPEED()           (EMMC_GET_CSD(103, 96))
+#define EMMC_CSD_CCC()                  (EMMC_GET_CSD(95, 84))
+#define EMMC_CSD_READ_BL_LEN()          (EMMC_GET_CSD(83, 80))
+#define EMMC_CSD_READ_BL_PARTIAL()      (EMMC_GET_CSD(79, 79))
+#define EMMC_CSD_WRITE_BLK_MISALIGN()   (EMMC_GET_CSD(78, 78))
+#define EMMC_CSD_READ_BLK_MISALIGN()    (EMMC_GET_CSD(77, 77))
+#define EMMC_CSD_DSR_IMP()              (EMMC_GET_CSD(76, 76))
+#define EMMC_CSD_C_SIZE()               (EMMC_GET_CSD(73, 62))
+#define EMMC_CSD_VDD_R_CURR_MIN()       (EMMC_GET_CSD(61, 59))
+#define EMMC_CSD_VDD_R_CURR_MAX()       (EMMC_GET_CSD(58, 56))
+#define EMMC_CSD_VDD_W_CURR_MIN()       (EMMC_GET_CSD(55, 53))
+#define EMMC_CSD_VDD_W_CURR_MAX()       (EMMC_GET_CSD(52, 50))
+#define EMMC_CSD_C_SIZE_MULT()          (EMMC_GET_CSD(49, 47))
+#define EMMC_CSD_ERASE_GRP_SIZE()       (EMMC_GET_CSD(46, 42))
+#define EMMC_CSD_ERASE_GRP_MULT()       (EMMC_GET_CSD(41, 37))
+#define EMMC_CSD_WP_GRP_SIZE()          (EMMC_GET_CSD(36, 32))
+#define EMMC_CSD_WP_GRP_ENABLE()        (EMMC_GET_CSD(31, 31))
+#define EMMC_CSD_DEFALT_ECC()           (EMMC_GET_CSD(30, 29))
+#define EMMC_CSD_R2W_FACTOR()           (EMMC_GET_CSD(28, 26))
+#define EMMC_CSD_WRITE_BL_LEN()         (EMMC_GET_CSD(25, 22))
+#define EMMC_CSD_WRITE_BL_PARTIAL()     (EMMC_GET_CSD(21, 21))
+#define EMMC_CSD_CONTENT_PROT_APP()     (EMMC_GET_CSD(16, 16))
+#define EMMC_CSD_FILE_FORMAT_GRP()      (EMMC_GET_CSD(15, 15))
+#define EMMC_CSD_COPY()                 (EMMC_GET_CSD(14, 14))
+#define EMMC_CSD_PERM_WRITE_PROTECT()   (EMMC_GET_CSD(13, 13))
+#define EMMC_CSD_TMP_WRITE_PROTECT()    (EMMC_GET_CSD(12, 12))
+#define EMMC_CSD_FILE_FORMAT()          (EMMC_GET_CSD(11, 10))
+#define EMMC_CSD_ECC()                  (EMMC_GET_CSD(9, 8))
+#define EMMC_CSD_CRC()                  (EMMC_GET_CSD(7, 1))
+
+/** @brief for sector access
+ */
+#define EMMC_4B_BOUNDARY_CHECK_MASK         0x00000003
+#define EMMC_SECTOR_SIZE_SHIFT              9U	/* 512 = 2^9 */
+#define EMMC_SECTOR_SIZE                    512
+#define EMMC_BLOCK_LENGTH                   512
+#define EMMC_BLOCK_LENGTH_DW                128
+#define EMMC_BUF_SIZE_SHIFT                 3U	/* 8byte = 2^3 */
+
+/** @brief eMMC specification clock
+ */
+#define EMMC_CLOCK_SPEC_400K                400000UL	 /**< initialize clock 400KHz */
+#define EMMC_CLOCK_SPEC_20M                 20000000UL	 /**< normal speed 20MHz */
+#define EMMC_CLOCK_SPEC_26M                 26000000UL	 /**< high speed 26MHz */
+#define EMMC_CLOCK_SPEC_52M                 52000000UL	 /**< high speed 52MHz */
+#define EMMC_CLOCK_SPEC_100M                100000000UL	 /**< high speed 100MHz */
+
+/** @brief EMMC driver error code. (extended HAL_MEMCARD_RETURN)
+ */
+typedef enum {
+	EMMC_ERR = 0,				/**< unknown error */
+	EMMC_SUCCESS,				/**< OK */
+	EMMC_ERR_FROM_DMAC,			/**< DMAC allocation error */
+	EMMC_ERR_FROM_DMAC_TRANSFER,		/**< DMAC transfer error */
+	EMMC_ERR_CARD_STATUS_BIT,		/**< card status error. Non-masked error bit was set in the card status */
+	EMMC_ERR_CMD_TIMEOUT,			/**< command timeout error */
+	EMMC_ERR_DATA_TIMEOUT,			/**< data timeout error */
+	EMMC_ERR_CMD_CRC,			/**< command CRC error */
+	EMMC_ERR_DATA_CRC,			/**< data CRC error */
+	EMMC_ERR_PARAM,				/**< parameter error */
+	EMMC_ERR_RESPONSE,			/**< response error */
+	EMMC_ERR_RESPONSE_BUSY,			/**< response busy error */
+	EMMC_ERR_TRANSFER,			/**< data transfer error */
+	EMMC_ERR_READ_SECTOR,			/**< read sector error */
+	EMMC_ERR_WRITE_SECTOR,			/**< write sector error */
+	EMMC_ERR_STATE,				/**< state error */
+	EMMC_ERR_TIMEOUT,			/**< timeout error */
+	EMMC_ERR_ILLEGAL_CARD,			/**< illegal card */
+	EMMC_ERR_CARD_BUSY,			/**< Busy state */
+	EMMC_ERR_CARD_STATE,			/**< card state error */
+	EMMC_ERR_SET_TRACE,			/**< trace information error */
+	EMMC_ERR_FROM_TIMER,			/**< Timer error */
+	EMMC_ERR_FORCE_TERMINATE,		/**< Force terminate */
+	EMMC_ERR_CARD_POWER,			/**< card power fail */
+	EMMC_ERR_ERASE_SECTOR,			/**< erase sector error */
+	EMMC_ERR_INFO2				    /**< exec cmd error info2 */
+} EMMC_ERROR_CODE;
+
+/** @brief Function number */
+#define EMMC_FUNCNO_NONE						0U
+#define EMMC_FUNCNO_DRIVER_INIT						1U
+#define EMMC_FUNCNO_CARD_POWER_ON					2U
+#define EMMC_FUNCNO_MOUNT						3U
+#define EMMC_FUNCNO_CARD_INIT						4U
+#define EMMC_FUNCNO_HIGH_SPEED						5U
+#define EMMC_FUNCNO_BUS_WIDTH						6U
+#define EMMC_FUNCNO_MULTI_BOOT_SELECT_PARTITION				7U
+#define EMMC_FUNCNO_MULTI_BOOT_READ_SECTOR				8U
+#define EMMC_FUNCNO_TRANS_DATA_READ_SECTOR				9U
+#define EMMC_FUNCNO_UBOOT_IMAGE_SELECT_PARTITION			10U
+#define EMMC_FUNCNO_UBOOT_IMAGE_READ_SECTOR				11U
+#define EMMC_FUNCNO_SET_CLOCK						12U
+#define EMMC_FUNCNO_EXEC_CMD						13U
+#define EMMC_FUNCNO_READ_SECTOR						14U
+#define EMMC_FUNCNO_WRITE_SECTOR					15U
+#define EMMC_FUNCNO_ERASE_SECTOR					16U
+#define EMMC_FUNCNO_GET_PERTITION_ACCESS				17U
+/** @brief Response
+ */
+/** R1 */
+#define EMMC_R1_ERROR_MASK                      0xFDBFE080U	/* Type 'E' bit and bit14(must be 0). ignore bit22 */
+#define EMMC_R1_ERROR_MASK_WITHOUT_CRC          (0xFD3FE080U)	/* Ignore bit23 (Not check CRC error) */
+#define EMMC_R1_STATE_MASK                      0x00001E00U	/* [12:9] */
+#define EMMC_R1_READY                           0x00000100U	/* bit8 */
+#define EMMC_R1_STATE_SHIFT                     9
+
+/** R4 */
+#define EMMC_R4_RCA_MASK                        0xFFFF0000UL
+#define EMMC_R4_STATUS                          0x00008000UL
+
+/** CSD */
+#define EMMC_TRANSPEED_FREQ_UNIT_MASK           0x07	/* bit[2:0] */
+#define EMMC_TRANSPEED_FREQ_UNIT_SHIFT          0
+#define EMMC_TRANSPEED_MULT_MASK                0x78	/* bit[6:3] */
+#define EMMC_TRANSPEED_MULT_SHIFT               3
+
+/** OCR */
+#define EMMC_HOST_OCR_VALUE                     0x40FF8080
+#define EMMC_OCR_STATUS_BIT                     0x80000000L	/* Card power up status bit */
+#define EMMC_OCR_ACCESS_MODE_MASK               0x60000000L	/* bit[30:29] */
+#define EMMC_OCR_ACCESS_MODE_SECT               0x40000000L
+#define EMMC_OCR_ACCESS_MODE_BYTE               0x00000000L
+
+/** EXT_CSD */
+#define EMMC_EXT_CSD_S_CMD_SET                      504
+#define EMMC_EXT_CSD_INI_TIMEOUT_AP                 241
+#define EMMC_EXT_CSD_PWR_CL_DDR_52_360              239
+#define EMMC_EXT_CSD_PWR_CL_DDR_52_195              238
+#define EMMC_EXT_CSD_MIN_PERF_DDR_W_8_52            235
+#define EMMC_EXT_CSD_MIN_PERF_DDR_R_8_52            234
+#define EMMC_EXT_CSD_TRIM_MULT                      232
+#define EMMC_EXT_CSD_SEC_FEATURE_SUPPORT            231
+#define EMMC_EXT_CSD_SEC_ERASE_MULT                 229
+#define EMMC_EXT_CSD_BOOT_INFO                      228
+#define EMMC_EXT_CSD_BOOT_SIZE_MULTI                226
+#define EMMC_EXT_CSD_ACC_SIZE                       225
+#define EMMC_EXT_CSD_HC_ERASE_GRP_SIZE              224
+#define EMMC_EXT_CSD_ERASE_TIMEOUT_MULT             223
+#define EMMC_EXT_CSD_PEL_WR_SEC_C                   222
+#define EMMC_EXT_CSD_HC_WP_GRP_SIZE                 221
+#define EMMC_EXT_CSD_S_C_VCC                        220
+#define EMMC_EXT_CSD_S_C_VCCQ                       219
+#define EMMC_EXT_CSD_S_A_TIMEOUT                    217
+#define EMMC_EXT_CSD_SEC_COUNT                      215
+#define EMMC_EXT_CSD_MIN_PERF_W_8_52                210
+#define EMMC_EXT_CSD_MIN_PERF_R_8_52                209
+#define EMMC_EXT_CSD_MIN_PERF_W_8_26_4_52           208
+#define EMMC_EXT_CSD_MIN_PERF_R_8_26_4_52           207
+#define EMMC_EXT_CSD_MIN_PERF_W_4_26                206
+#define EMMC_EXT_CSD_MIN_PERF_R_4_26                205
+#define EMMC_EXT_CSD_PWR_CL_26_360                  203
+#define EMMC_EXT_CSD_PWR_CL_52_360                  202
+#define EMMC_EXT_CSD_PWR_CL_26_195                  201
+#define EMMC_EXT_CSD_PWR_CL_52_195                  200
+#define EMMC_EXT_CSD_CARD_TYPE                      196
+#define EMMC_EXT_CSD_CSD_STRUCTURE                  194
+#define EMMC_EXT_CSD_EXT_CSD_REV                    192
+#define EMMC_EXT_CSD_CMD_SET                        191
+#define EMMC_EXT_CSD_CMD_SET_REV                    189
+#define EMMC_EXT_CSD_POWER_CLASS                    187
+#define EMMC_EXT_CSD_HS_TIMING                      185
+#define EMMC_EXT_CSD_BUS_WIDTH                      183
+#define EMMC_EXT_CSD_ERASED_MEM_CONT                181
+#define EMMC_EXT_CSD_PARTITION_CONFIG               179
+#define EMMC_EXT_CSD_BOOT_CONFIG_PROT               178
+#define EMMC_EXT_CSD_BOOT_BUS_WIDTH                 177
+#define EMMC_EXT_CSD_ERASE_GROUP_DEF                175
+#define EMMC_EXT_CSD_BOOT_WP                        173
+#define EMMC_EXT_CSD_USER_WP                        171
+#define EMMC_EXT_CSD_FW_CONFIG                      169
+#define EMMC_EXT_CSD_RPMB_SIZE_MULT                 168
+#define EMMC_EXT_CSD_RST_n_FUNCTION                 162
+#define EMMC_EXT_CSD_PARTITIONING_SUPPORT           160
+#define EMMC_EXT_CSD_MAX_ENH_SIZE_MULT              159
+#define EMMC_EXT_CSD_PARTITIONS_ATTRIBUTE           156
+#define EMMC_EXT_CSD_PARTITION_SETTING_COMPLETED    155
+#define EMMC_EXT_CSD_GP_SIZE_MULT                   154
+#define EMMC_EXT_CSD_ENH_SIZE_MULT                  142
+#define EMMC_EXT_CSD_ENH_START_ADDR                 139
+#define EMMC_EXT_CSD_SEC_BAD_BLK_MGMNT              134
+
+#define EMMC_EXT_CSD_CARD_TYPE_26MHZ                0x01
+#define EMMC_EXT_CSD_CARD_TYPE_52MHZ                0x02
+#define EMMC_EXT_CSD_CARD_TYPE_DDR_52MHZ_12V        0x04
+#define EMMC_EXT_CSD_CARD_TYPE_DDR_52MHZ_18V        0x08
+#define EMMC_EXT_CSD_CARD_TYPE_52MHZ_MASK           0x0e
+
+/** SWITCH (CMD6) argument */
+#define	EXTCSD_ACCESS_BYTE	(BIT25|BIT24)
+#define	EXTCSD_SET_BITS		BIT24
+
+#define	HS_TIMING_ADD		(185<<16)	/* H'b9 */
+#define	HS_TIMING_1			(1<<8)
+#define	HS_TIMING_HS200		(2<<8)
+#define	HS_TIMING_HS400		(3<<8)
+
+#define	BUS_WIDTH_ADD		(183<<16)	/* H'b7 */
+#define	BUS_WIDTH_1			(0<<8)
+#define	BUS_WIDTH_4			(1<<8)
+#define	BUS_WIDTH_8			(2<<8)
+#define	BUS_WIDTH_4DDR		(5<<8)
+#define	BUS_WIDTH_8DDR		(6<<8)
+
+#define EMMC_SWITCH_HS_TIMING           (EXTCSD_ACCESS_BYTE|HS_TIMING_ADD|HS_TIMING_1)		/**< H'03b90100 */
+#define	EMMC_SWITCH_HS_TIMING_OFF	    (EXTCSD_ACCESS_BYTE|HS_TIMING_ADD)					/**< H'03b90000 */
+
+#define EMMC_SWITCH_BUS_WIDTH_1         (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_1)		/**< H'03b70000 */
+#define EMMC_SWITCH_BUS_WIDTH_4         (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_4)		/**< H'03b70100 */
+#define EMMC_SWITCH_BUS_WIDTH_8         (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_8)		/**< H'03b70200 */
+#define	EMMC_SWITCH_BUS_WIDTH_4DDR      (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_4DDR)	/**< H'03b70500 */
+#define	EMMC_SWITCH_BUS_WIDTH_8DDR      (EXTCSD_ACCESS_BYTE|BUS_WIDTH_ADD|BUS_WIDTH_8DDR)	/**< H'03b70600 */
+#define EMMC_SWITCH_PARTITION_CONFIG    0x03B30000UL	/**< Partition config = 0x00 */
+
+#define TIMING_HIGH_SPEED					1UL
+#define EMMC_BOOT_PARTITION_EN_MASK	0x38U
+#define EMMC_BOOT_PARTITION_EN_SHIFT	3U
+
+/** Bus width */
+#define EMMC_BUSWIDTH_1BIT              CE_CMD_SET_DATW_1BIT
+#define EMMC_BUSWIDTH_4BIT              CE_CMD_SET_DATW_4BIT
+#define EMMC_BUSWIDTH_8BIT              CE_CMD_SET_DATW_8BIT
+
+/** for st_mmc_base */
+#define EMMC_MAX_RESPONSE_LENGTH        17
+#define EMMC_MAX_CID_LENGTH             16
+#define EMMC_MAX_CSD_LENGTH             16
+#define EMMC_MAX_EXT_CSD_LENGTH         512U
+#define EMMC_RES_REG_ALIGNED            4U
+#define EMMC_BUF_REG_ALIGNED            8U
+
+/** @brief for TAAC mask
+ */
+#define TAAC_TIME_UNIT_MASK         (0x07)
+#define TAAC_MULTIPLIER_FACTOR_MASK (0x0F)
+
+/* ********************** STRUCTURES, TYPE DEFINITIONS ********************* */
+
+/** @brief Partition id
+ */
+typedef enum {
+	PARTITION_ID_USER = 0x0,    /**< User Area */
+	PARTITION_ID_BOOT_1 = 0x1,  /**< boot partition 1 */
+	PARTITION_ID_BOOT_2 = 0x2,  /**< boot partition 2 */
+	PARTITION_ID_RPMB = 0x3,    /**< Replay Protected Memory Block */
+	PARTITION_ID_GP_1 = 0x4,    /**< General Purpose partition 1 */
+	PARTITION_ID_GP_2 = 0x5,    /**< General Purpose partition 2 */
+	PARTITION_ID_GP_3 = 0x6,    /**< General Purpose partition 3 */
+	PARTITION_ID_GP_4 = 0x7,    /**< General Purpose partition 4 */
+	PARTITION_ID_MASK = 0x7	    /**< [2:0] */
+} EMMC_PARTITION_ID;
+
+/** @brief card state in R1 response [12:9]
+ */
+typedef enum {
+	EMMC_R1_STATE_IDLE = 0,
+	EMMC_R1_STATE_READY,
+	EMMC_R1_STATE_IDENT,
+	EMMC_R1_STATE_STBY,
+	EMMC_R1_STATE_TRAN,
+	EMMC_R1_STATE_DATA,
+	EMMC_R1_STATE_RCV,
+	EMMC_R1_STATE_PRG,
+	EMMC_R1_STATE_DIS,
+	EMMC_R1_STATE_BTST,
+	EMMC_R1_STATE_SLEP
+} EMMC_R1_STATE;
+
+typedef enum {
+	ESTATE_BEGIN = 0,
+	ESTATE_ISSUE_CMD,
+	ESTATE_NON_RESP_CMD,
+	ESTATE_RCV_RESP,
+	ESTATE_RCV_RESPONSE_BUSY,
+	ESTATE_CHECK_RESPONSE_COMPLETE,
+	ESTATE_DATA_TRANSFER,
+	ESTATE_DATA_TRANSFER_COMPLETE,
+	ESTATE_ACCESS_END,
+	ESTATE_TRANSFER_ERROR,
+	ESTATE_ERROR,
+	ESTATE_END
+} EMMC_INT_STATE;
+
+/** @brief eMMC boot driver error information
+ */
+typedef struct {
+	uint16_t num;		  /**< error no */
+	uint16_t code;		  /**< error code */
+	volatile uint32_t info1;  /**< SD_INFO1 register value. (hardware dependence) */
+	volatile uint32_t info2;  /**< SD_INFO2 register value. (hardware dependence) */
+	volatile uint32_t status1;/**< SD_ERR_STS1 register value. (hardware dependence) */
+	volatile uint32_t status2;/**< SD_ERR_STS2 register value. (hardware dependence) */
+	volatile uint32_t dm_info1;/**< DM_CM_INFO1 register value. (hardware dependence) */
+	volatile uint32_t dm_info2;/**< DM_CM_INFO2 register value. (hardware dependence) */
+} st_error_info;
+
+/** @brief Command information
+ */
+typedef struct {
+	HAL_MEMCARD_COMMAND cmd;	/**< Command information */
+	uint32_t arg;			  /**< argument */
+	HAL_MEMCARD_OPERATION dir;	/**< direction */
+	uint32_t hw;			  /**< H/W dependence. SD_CMD register value. */
+} st_command_info;
+
+/** @brief MMC driver base
+ */
+typedef struct {
+	st_error_info error_info;	/**< error information */
+	st_command_info cmd_info;	/**< command information */
+
+	/* for data transfer */
+	uint32_t *buff_address_virtual;	   /**< Dest or Src buff */
+	uint32_t *buff_address_physical;   /**< Dest or Src buff */
+	HAL_MEMCARD_DATA_WIDTH bus_width;
+					/**< bus width */
+	uint32_t trans_size;		  /**< transfer size for this command */
+	uint32_t remain_size;		  /**< remain size for this command */
+	uint32_t response_length;	  /**< response length for this command */
+	uint32_t sector_size;		   /**< sector_size */
+
+	/* clock */
+	uint32_t base_clock;		  /**< MMC host controller clock */
+	uint32_t max_freq;		  /**< Max frequency (Card Spec)[Hz]. It changes dynamically by CSD and EXT_CSD. */
+	uint32_t request_freq;		  /**< request freq [Hz] (400K, 26MHz, 52MHz, etc) */
+	uint32_t current_freq;		  /**< current MMC clock[Hz] (the closest frequency supported by HW) */
+
+	/* state flag */
+	HAL_MEMCARD_PRESENCE_STATUS card_present;
+						/**< presence status of the memory card */
+	uint32_t card_power_enable;		  /**< True : Power ON */
+	uint32_t clock_enable;			  /**< True : Clock ON */
+	uint32_t initialize;			  /**< True : initialize complete. */
+	uint32_t access_mode;			  /**< True : sector access, FALSE : byte access */
+	uint32_t mount;				  /**< True : mount complete. */
+	uint32_t selected;			  /**< True : selected card. */
+	HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode;
+						    /**< 0: DMA, 1:PIO */
+	uint32_t image_num;			  /**< loaded ISSW image No. ISSW have copy image. */
+	EMMC_R1_STATE current_state;		/**< card state */
+	volatile uint32_t during_cmd_processing;  /**< True : during command processing */
+	volatile uint32_t during_transfer;	  /**< True : during transfer */
+	volatile uint32_t during_dma_transfer;	  /**< True : during transfer (DMA)*/
+	volatile uint32_t dma_error_flag;	  /**< True : occurred DMAC error */
+	volatile uint32_t force_terminate;	  /**< force terminate flag */
+	volatile uint32_t state_machine_blocking; /**< state machine blocking flag : True or False */
+	volatile uint32_t get_partition_access_flag;
+						  /**< True : get partition access processing */
+
+	EMMC_PARTITION_ID boot_partition_en;	/**< Boot partition */
+	EMMC_PARTITION_ID partition_access;	/**< Current access partition */
+
+	/* timeout */
+	uint32_t hs_timing;			/**< high speed */
+
+	/* timeout */
+	uint32_t data_timeout;			  /**< read and write data timeout.*/
+
+	/* retry */
+	uint32_t retries_after_fail;  /**< how many times to try after fail, for instance sending command */
+
+	/* interrupt */
+	volatile uint32_t int_event1; /**< interrupt SD_INFO1 Event */
+	volatile uint32_t int_event2;	  /**< interrupt SD_INFO2 Event */
+	volatile uint32_t dm_event1;  /**< interrupt DM_CM_INFO1 Event */
+	volatile uint32_t dm_event2;	  /**< interrupt DM_CM_INFO2 Event */
+
+	/* response */
+	uint32_t *response;	      /**< pointer to buffer for executing command. */
+	uint32_t r1_card_status;      /**< R1 response data */
+	uint32_t r3_ocr;	      /**< R3 response data */
+	uint32_t r4_resp;	      /**< R4 response data */
+	uint32_t r5_resp;	      /**< R5 response data */
+
+	uint32_t low_clock_mode_enable;
+				      /**< True : clock mode is low. (MMC clock = Max26MHz) */
+	uint32_t reserved2;
+	uint32_t reserved3;
+	uint32_t reserved4;
+
+	/* CSD registers (4byte align) */
+	uint8_t csd_data[EMMC_MAX_CSD_LENGTH]		      /**< CSD */
+	    __attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
+	/* CID registers (4byte align) */
+	uint8_t cid_data[EMMC_MAX_CID_LENGTH]		      /**< CID */
+	    __attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
+	/* EXT CSD registers (8byte align) */
+	uint8_t ext_csd_data[EMMC_MAX_EXT_CSD_LENGTH]	      /**< EXT_CSD */
+	    __attribute__ ((aligned(EMMC_BUF_REG_ALIGNED)));
+	/* Response registers (4byte align) */
+	uint8_t response_data[EMMC_MAX_RESPONSE_LENGTH]	      /**< other response */
+	    __attribute__ ((aligned(EMMC_RES_REG_ALIGNED)));
+} st_mmc_base;
+
+typedef int (*func) (void);
+
+/* ********************** DECLARATION OF EXTERNAL DATA ********************* */
+
+/* ************************** FUNCTION PROTOTYPES ************************** */
+uint32_t emmc_get_csd_time(void);
+
+#define MMC_DEBUG
+/* ********************************* CODE ********************************** */
+
+/* ******************************** END ************************************ */
+#endif /* __EMMC_STD_H__ */
diff --git a/drivers/renesas/rcar/emmc/emmc_utility.c b/drivers/renesas/rcar/emmc/emmc_utility.c
new file mode 100644
index 0000000..e64947d
--- /dev/null
+++ b/drivers/renesas/rcar/emmc/emmc_utility.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include "emmc_config.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "emmc_registers.h"
+#include "emmc_def.h"
+
+static const uint32_t cmd_reg_hw[EMMC_CMD_MAX + 1] = {
+	0x00000000,		/* CMD0 */
+	0x00000701,		/* CMD1 */
+	0x00000002,		/* CMD2 */
+	0x00000003,		/* CMD3 */
+	0x00000004,		/* CMD4 */
+	0x00000505,		/* CMD5 */
+	0x00000406,		/* CMD6 */
+	0x00000007,		/* CMD7 */
+	0x00001C08,		/* CMD8 */
+	0x00000009,		/* CMD9 */
+	0x0000000A,		/* CMD10 */
+	0x00000000,		/* reserved */
+	0x0000000C,		/* CMD12 */
+	0x0000000D,		/* CMD13 */
+	0x00001C0E,		/* CMD14 */
+	0x0000000F,		/* CMD15 */
+	0x00000010,		/* CMD16 */
+	0x00000011,		/* CMD17 */
+	0x00007C12,		/* CMD18 */
+	0x00000C13,		/* CMD19 */
+	0x00000000,
+	0x00001C15,		/* CMD21 */
+	0x00000000,
+	0x00000017,		/* CMD23 */
+	0x00000018,		/* CMD24 */
+	0x00006C19,		/* CMD25 */
+	0x00000C1A,		/* CMD26 */
+	0x0000001B,		/* CMD27 */
+	0x0000001C,		/* CMD28 */
+	0x0000001D,		/* CMD29 */
+	0x0000001E,		/* CMD30 */
+	0x00001C1F,		/* CMD31 */
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000423,		/* CMD35 */
+	0x00000424,		/* CMD36 */
+	0x00000000,
+	0x00000026,		/* CMD38 */
+	0x00000427,		/* CMD39 */
+	0x00000428,		/* CMD40(send cmd) */
+	0x00000000,
+	0x0000002A,		/* CMD42 */
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000C31,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00007C35,
+	0x00006C36,
+	0x00000037,		/* CMD55 */
+	0x00000038,		/* CMD56(Read) */
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000
+};
+
+uint32_t emmc_bit_field(uint8_t *data, uint32_t top, uint32_t bottom)
+{
+	uint32_t value;
+
+	uint32_t index_top = (uint32_t) (15 - (top >> 3));
+	uint32_t index_bottom = (uint32_t) (15 - (bottom >> 3));
+
+	if (index_top == index_bottom) {
+		value = data[index_top];
+	} else if ((index_top + 1) == index_bottom) {
+		value =
+		    (uint32_t) ((data[index_top] << 8) | data[index_bottom]);
+	} else if ((index_top + 2) == index_bottom) {
+		value =
+		    (uint32_t) ((data[index_top] << 16) |
+				(data[index_top + 1] << 8) | data[index_top +
+								  2]);
+	} else {
+		value =
+		    (uint32_t) ((data[index_top] << 24) |
+				(data[index_top + 1] << 16) |
+				(data[index_top + 2] << 8) | data[index_top +
+								  3]);
+	}
+
+	value = ((value >> (bottom & 0x07)) & ((1 << (top - bottom + 1)) - 1));
+
+	return value;
+}
+
+void emmc_write_error_info(uint16_t func_no, EMMC_ERROR_CODE error_code)
+{
+
+	mmc_drv_obj.error_info.num = func_no;
+	mmc_drv_obj.error_info.code = (uint16_t) error_code;
+
+	ERROR("BL2: emmc err:func_no=0x%x code=0x%x\n", func_no, error_code);
+}
+
+void emmc_write_error_info_func_no(uint16_t func_no)
+{
+
+	mmc_drv_obj.error_info.num = func_no;
+
+	ERROR("BL2: emmc err:func_no=0x%x\n", func_no);
+}
+
+void emmc_make_nontrans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg)
+{
+	/* command information */
+	mmc_drv_obj.cmd_info.cmd = cmd;
+	mmc_drv_obj.cmd_info.arg = arg;
+	mmc_drv_obj.cmd_info.dir = HAL_MEMCARD_READ;
+	mmc_drv_obj.cmd_info.hw =
+	    cmd_reg_hw[cmd & HAL_MEMCARD_COMMAND_INDEX_MASK];
+
+	/* clear data transfer information */
+	mmc_drv_obj.trans_size = 0;
+	mmc_drv_obj.remain_size = 0;
+	mmc_drv_obj.buff_address_virtual = NULL;
+	mmc_drv_obj.buff_address_physical = NULL;
+
+	/* response information */
+	mmc_drv_obj.response_length = 6;
+
+	switch (mmc_drv_obj.cmd_info.cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK) {
+	case HAL_MEMCARD_RESPONSE_NONE:
+		mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
+		mmc_drv_obj.response_length = 0;
+		break;
+	case HAL_MEMCARD_RESPONSE_R1:
+		mmc_drv_obj.response = &mmc_drv_obj.r1_card_status;
+		break;
+	case HAL_MEMCARD_RESPONSE_R1b:
+		mmc_drv_obj.cmd_info.hw |= BIT10;	/* bit10 = R1 busy bit */
+		mmc_drv_obj.response = &mmc_drv_obj.r1_card_status;
+		break;
+	case HAL_MEMCARD_RESPONSE_R2:
+		mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
+		mmc_drv_obj.response_length = 17;
+		break;
+	case HAL_MEMCARD_RESPONSE_R3:
+		mmc_drv_obj.response = &mmc_drv_obj.r3_ocr;
+		break;
+	case HAL_MEMCARD_RESPONSE_R4:
+		mmc_drv_obj.response = &mmc_drv_obj.r4_resp;
+		break;
+	case HAL_MEMCARD_RESPONSE_R5:
+		mmc_drv_obj.response = &mmc_drv_obj.r5_resp;
+		break;
+	default:
+		mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
+		break;
+	}
+}
+
+void emmc_make_trans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg,
+			 uint32_t *buff_address_virtual,
+			 uint32_t len,
+			 HAL_MEMCARD_OPERATION dir,
+			 HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode)
+{
+	emmc_make_nontrans_cmd(cmd, arg);	/* update common information */
+
+	/* for data transfer command */
+	mmc_drv_obj.cmd_info.dir = dir;
+	mmc_drv_obj.buff_address_virtual = buff_address_virtual;
+	mmc_drv_obj.buff_address_physical = buff_address_virtual;
+	mmc_drv_obj.trans_size = len;
+	mmc_drv_obj.remain_size = len;
+	mmc_drv_obj.transfer_mode = transfer_mode;
+}
+
+EMMC_ERROR_CODE emmc_send_idle_cmd(uint32_t arg)
+{
+	EMMC_ERROR_CODE result;
+	uint32_t freq;
+
+	/* initialize state */
+	mmc_drv_obj.mount = FALSE;
+	mmc_drv_obj.selected = FALSE;
+	mmc_drv_obj.during_transfer = FALSE;
+	mmc_drv_obj.during_cmd_processing = FALSE;
+	mmc_drv_obj.during_dma_transfer = FALSE;
+	mmc_drv_obj.dma_error_flag = FALSE;
+	mmc_drv_obj.force_terminate = FALSE;
+	mmc_drv_obj.state_machine_blocking = FALSE;
+
+	mmc_drv_obj.bus_width = HAL_MEMCARD_DATA_WIDTH_1_BIT;
+	mmc_drv_obj.max_freq = MMC_20MHZ;	/* 20MHz */
+	mmc_drv_obj.current_state = EMMC_R1_STATE_IDLE;
+
+	/* CMD0 (MMC clock is current frequency. if Data transfer mode, 20MHz or higher.) */
+	emmc_make_nontrans_cmd(CMD0_GO_IDLE_STATE, arg);	/* CMD0 */
+	result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+
+	/* change MMC clock(400KHz) */
+	freq = MMC_400KHZ;
+	result = emmc_set_request_mmc_clock(&freq);
+	if (result != EMMC_SUCCESS) {
+		return result;
+	}
+
+	return EMMC_SUCCESS;
+}