fix(versal): remove check for bl32 load address
With PLM firmware version 2024.1 the bl32 load address is set
correctly in handoff parameters.
Hence the check to initialize bl32 load address when bl32
load address is indicated as 0 in handoff is removed.
Change-Id: I322b8d2fc1137297142704ea1087c185e16177cc
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
diff --git a/plat/xilinx/versal/bl31_versal_setup.c b/plat/xilinx/versal/bl31_versal_setup.c
index 08c0205..594784f 100644
--- a/plat/xilinx/versal/bl31_versal_setup.c
+++ b/plat/xilinx/versal/bl31_versal_setup.c
@@ -118,19 +118,6 @@
panic();
} else {
INFO("BL31: PLM to TF-A handover success %u\n", ret);
-
- /*
- * The BL32 load address is indicated as 0x0 in the handoff
- * parameters, which is different from the default/user-provided
- * load address of 0x60000000 but the flags are correctly
- * configured. Consequently, in this scenario, set the PC
- * to the requested BL32_BASE address.
- */
-
- /* TODO: Remove the following check once this is fixed from PLM */
- if (bl32_image_ep_info.pc == 0 && bl32_image_ep_info.spsr != 0) {
- bl32_image_ep_info.pc = (uintptr_t)BL32_BASE;
- }
}
NOTICE("BL31: Secure code at 0x%lx\n", bl32_image_ep_info.pc);